I am trying to install MySQL on a Windows 10 PC. I downloaded the installer package and followed those steps
Went to https://dev.mysql.com/downloads/windows/
clicked on "MySQL Installer"
Scrolled to Generally Available(GA) Releases section
Clicked on "Windows (x86, 32-bit), MSI Installer" (mysql-installer-community-5.7.21.0.msi) and it started the download.
Once the download was complete, I double clicked on the installer and it gave a usual pop-up for any installation like,"Do you want this app to make changes to your device?" after clicking on "yes" for the answer to this question, it shows "Please wait while Windows configures MySQL-Installer-community" like below screenshot.
And then it keeps showing this installation progress bar for a very long time. Like more than 7-8 hours and the installation never completes
So it seems something is wrong as I don't think MySQL installation needs this long time. I tried to restart my computer and then delete any files related to MySQL from my computer and then started the whole process of installation again. But no luck yet
Anyone has any suggestion on this or did anyone face this kind of issue before? If so, is there a fix or a work around for this?
ok. So finally this is how I resolved my issue. And I found the solution at https://bugs.mysql.com/bug.php?id=82004 . The solution to this problem is to close an open "Windows installer" (the one using 0 memory and CPU) via task manager and the installation should begin running as expected.
Alternative solution: Use an administrator command prompt to run the MySQL installer on Windows 10. Details:
(Note: if you have any problems in the following steps, you can try to restart your computer. Then restart the steps.)
Right-click the Start/Windows icon in the bottom-left corner of Windows.
Click: Windows PowerShell (Admin).
A window asks: Do you want to allow this app to make changes to your device? Click: Yes.
Change to the directory with the MySQL installer. For example, if you downloaded the MySQL installer, type something like:
cd C:\Users\my_username\Downloads\
(Note: To save some typing, you can type a few characters, and then press the tab key, to make Windows show you various auto-completion options.)
Run the MySQL installer. Type something like the following command---make sure to include the period and backslash at the beginning---and press Enter.
.\mysql-installer-community-8.0.11.0.msi
Note: The idea of using an administrator command prompt came from John Geffe, in the link below, which was cited in the answer written by the original poster (user8425592):
https://bugs.mysql.com/bug.php?id=82004
Bug #82004 MySQL Installer freezes during "Please wait while Windows configures..." phase
[6 Feb 3:58] John Geffe
To get past this problem I had to run the .msi installer from an the
Administrator command prompt. Hopefully this helps someone in the
future.
[19 Apr 18:14] Jim McCauley
John Geffe: Thanks! Your note on installing as an administrator seems
to have taken care of the problem.
this did the trick for me: https://ao.ms/mysql-community-server-msi-installer-hangs-on-windows-10/
run cmd (commandline) as Administrator
cd to your location that you downloaded the .MSI to
run the “msiexec” commandline tool with option “/i” as follows:
msiexec /i [replace with file name]
example: msiexec /i mysql-installer-community-5.7.20.0.msi
Another thing that worked for me was running the installer in compatibility mode for previous version of Windows. You can try that as well.
Go to the link you provided (the first one) and try installing MySql Workbench. That is the version that is commonly used, and one that I verified works in Windows 10. Here is the link: https://dev.mysql.com/downloads/workbench/
Obviously, make sure you choose the right architecture, have the correct permissions to install software, and have enough space on your hard drive, or on the machine you are installing to.
Please install "Update for Visual C++ 2013 and Visual C++ Redistributable Package" from Microsoft Site "http://download.microsoft.com/download/0/5/6/056DCDA9-D667-4E27-8001-8A0C6971D6B1/vcredist_x64.exe"
Please look here at https://support.microsoft.com/en-in/help/3179560/update-for-visual-c-2013-and-visual-c-redistributable-package
Yes, I also got the same problem on my Windows 10.
Followed the Powershell solution and it worked.
Just repeat the above:
Click Start on bottom left corner
Scroll down the application list until Windows Powershell
Select Windows Powershell again on sub-menu
Type in cd (to change to your .msi folder)
Type .\xxxxx.msi (this is the installer file name)
All good.
Once you install the above package run the installer again and do the steps. You will be able to install the mysql-installer-community-5.7.21.0 for 64 bit windows 10
closing Windows Installer instances using 0 memory and CPU helps me to get past this problem.
For me on Window-10 machine, there was a problem with the "mysql-connector-net-8.0.11.msi". I was not able to uninstall this and hence all my subsequent efforts to install MySQL were failing. I did the following to overcome this issue.
Re-installed "mysql-connector-net-8.0.11.msi" Get it here and used the 'Repair' option
Installed the "mysql-installer-web-community-8.0.11.0.msi"
These two things solved my problem. Hope this helps.
The reson is your antivirus didn't allow the mysql, so Disable protection(until restart),( in your task bar right side click the arrow and right click to antivirus,to select (Disable protection(until restart)).then restart your computer again install mysql installer it will work.
For this issue just run .msi file in command administration like
E:\mysql-installer-community-8.0.20.0.msi\
follow this link:
https://kb.foxitsoftware.com/hc/en-us/articles/360040660611-How-to-install-MSI-from-command-line-with-administrator
In my case, an upgrade to 5.7.29 on Windows 10 via mysql-installer-web-community-8.0.20.0.msi, the install froze "backing up the database". The log tab showed no activity for 8 minutes. I clicked on cancel, then at the "are you sure" prompt I declined to cancel, and all of a sudden the install was working again. Very strange...
I encountered the same problem, preparing but can never get started. Tried to close other installation programs with no use, but I took the inspiration and proceeded with restart the computer and it worked nicely. So, I think the issue is to get rid of everything that could be in the background running that somehow interferes the installation.
You should run the installer as an administrator but this specific installation may not provide an option for this. Some might have it but it's most likely that it's unavailable for many users. So you should run it in cmd or powershell. And don't forget to run these shells as an administrator coz that's the whole point here. Once there, navigate to the installer's location which usually is in the downloads directory and run it using this command ./name.msi
Make sure no other ongoing installation of this instance. Close it if there exists one and undo the changes made by uninstalling it from the panel. If still facing difficulties, try restarting your machine and repeat this procedure...
Have fun
I had the same Problem, A simple solution is to give access the "SYSTEM" to the msiserver...I know, this is hard to understand what I am saying....You can Simply see this Video and you will definitely find the answer https://www.youtube.com/watch?v=6SdXMjXmnUk, It is a matter of just 3 minutes...
I encountered the same issue of taking too much time to install mysql community installer.I tried 3 times by cancelling the installation and restarting to perform a new installation.But had same issue. I tried 2 things
First to end all tasks associated with installation which I performed for installing mysql using Task Manager
Reinitiated the installation but didn't solved my issue.
Secondly tried to install through Windows Powershell as admin, which solved the problem.
Click on the Windows icon/start on the bottom left corner.
Right click and select the option Windows Powershell (Admin).
A pop up window will ask Do you want to allow this app to make changes to your device?....Click Yes.
Now cd to your downloads folder/wherever you downloaded the .msi file (For example cd C:\Users\MYPC\Downloads).
Once you reach to the folder where the .msi file is kept, run the following command.
.\mysql-installer-web-community-8.0.23.0.msi (Note: this is the version which I have downloaded, modify as your version).
I've installed Sublime-HTMLPrettify as shown here https://github.com/victorporof/Sublime-HTMLPrettify
but when I try and use the command (e.g. by right clicking on a selected section of HTML) it doesn't do anything.
Is there something I'm missing?
==== PLATFORMS
SublimeText 2
OS X 10.11.3 (15D21)
Node.js is at /usr/local/bin/node and I can access it from the CLI using node.
Which version of Sublime Text you are using? and in which OS you have installed it?
For your tag I supposed Sublime Text 2.
Ensure you have node.js on System Paths and take a note from the commands and configurations that the description file of sublime-htmlprettify are only for Sublime Text 3
Hope this help you.
I really love Sublime Text 2 and I want to use it for Software programming.
The problem is that our source files are stored on a Linux server and we all work using PuTTy to connect and Vim to edit the code. We can compile the source by executing a command in PuTTy.
I want to use Sublime Text 2 for coding (the folders in Linux are mounted on our Windows system so the files can be opened in Windows). But whenever I want to compile, I have to open PuTTy and compile manually which asks a lot of time. Can I automate this somehow? Like if I push a button (F8 for example) then PuTTy opens, connects to the Linux server with SSH goes to the correct folder and compiles the source file. Is this possible?
Thanks for any help!
Sublime Build Systems can be used to launch a process like this.
I'm not sure if you can automate anything using putty. But the fork named ExtraPutty allows this: it is scriptable using Lua, an you can launch a script from command line.
If you arefamiliar with Javascript, another alternative would be to use Grunt + a module like SSH2 to automate you compilation process, then launch it from a Sublime build system. The ssh module does not allow interactive commands to be scripted, so I recommend you to use SSH2.
There are many other options; pick the one with which you're the more confortable, then use Sublime Build system to launch it.
I'm brand new to Ruby and Rails, so sorry if this is a totally ridiculous question. The tutorial book that I'm reading says that I should be able to launch a Gemfile in Sublime Text directly from the command prompt using the subl Gemfile command. When I try this, I get an error that says "subl is not recognized as an internal or external command, operable program, or batch file".
I am in the right directory where the Gemfile is located.
Ruby is definitely installed and I am using the command prompt with Ruby and Rails.
i have the sublime text 2 and i added the path as i found,but no solution.i even tried :sublime_text Gemfile
i have tried so many different solutions but no result.
i'm using windows
Thank you in advance
the reason it isn't working isn't a rails question, it is because you haven't set up sublime to work using the command "subl" in your terminal. Try these commands. If you wish to understand the error better, just type in any gibberish into the terminal. It will tell you a similar thing.
sudomkdir /usr/local
sudomkdir /usr/local/bin
sudo ln-s/Applications/Sublime\Text\2.app/Contents/SharedSupport/bin/subl /usr/local/bin/subl
EDIT
Sublime Text from Command Line (Win7)
https://teamtreehouse.com/forum/sublime-text-command-line-shortcut-windows
https://teamtreehouse.com/forum/ruby-on-rails-subl-command-not-found
Otherwise, you can refer to this
subl is Mac only.
For Windows, you need to add C:\Program Files (x86)\Sublime Text 2 to your Environment path,
This will work on Windows 7:
Right click My Computer, Properties, then Advanced System Settings, then Environment Variables.. Go down to System Variables, and edit PATH, you'll need to add the Path to Sublime.
Then you should be able to run sublime_text my-file from the command line. (Since the .exe is called sublime_text.exe
does MonoDevelop 3 support attach to process? If so can someone point out where it is or any possible workaround.
The short answer is: No, not as far as i know.
However if you are looking to do debugging without launching the project from MonoDevelop there is an option of using the Soft debugger described here. The workflow for doing that is:
Enable Custom commands to the softdebugger in monodevelop by setting environment variable MONODEVELOP_SDB_TEST to some value
Start monodevelop
Go to the Run -> Run With -> Custom Command Mono Soft Debugger
Enter a port number and an IP address of your machine where the debugee can reach MonoDevelop. Leave the other fields empty.
Press Listen.
Start the application with parameters --debug and --debugger-agent=transport=dt_socket,address=[IP specified in monodevelop]:[Port specified in monodevelop]
And then you can inspect what is going on like normally using breakpoints stop exection, inspect variables and so forth. Notice that this enables you to deploy across machines as long as they can be reached over the network.
I know this is not "Attach to process" but as you are very limited in the description of your intent, this might be of value to you.
At first , I also can not find "attach to process "in my Monodevelop (2.8.6.3) IDE,
but when I installed "GUN debugger plugin for monodevelop" ,I can find "attach to process " in "RUN" memu.
So ,You should install the GNU debugger plugin for monodevelop for "attach to process"
ps:my monodevelop is in Ubuntu 12.04; "GUN debugger plugin for monodevelop" can be find in “ monodevelop in Software Centre ”.