Consider the below code
UPDATE users SET class = '-' + CAST(class AS CHAR(50)) + '-' WHERE 1=1
The above query throws the following error:
#1292 - Truncated incorrect DOUBLE value: '-'
I recently updated the class column from int(11) to varchar(255) and am trying to update every row to a format of: -class- where class is the previous int value.
if you have updated the column from int to varchar then there is no point casting it and just use CONCAT
UPDATE users SET class = CONCAT ('-',class,'-') WHERE 1=1
if class is NULL then the result will be NULL so to make sure you are only updating CLASS with values
UPDATE users SET class = CONCAT ('-',class,'-') WHERE class IS NOT NULL
v_fname='Hari';
v_lastname='Anil'
create table name_tab(fullname varchar(200));
how to insert v_fname and v_lastname into fullname column.
i tried like below not work out.
insert into name_tab(fullname) values('first name is :'||v_fname||'Last name is '||v_lastname);
Please help on this
Thanks in advance.
try this:
insert into name_tab(fullname)
select ws_concat("||","first name is:",v_fname, "Last name is:", v_lastname)
from <other-table>;
The <other-table> is the table where your v_fname and v_lastname are stored.
Try this:
insert into name_tab(fullname)
values( concat( 'First Name is : ', v_fname, ', Last Name is: ', v_lastname );
You have to use variable identifier like $v_fname and $v_lastname (this is PHP style) in the statement.
I suggest you to redefine the table structure to accommodate first_name and last_names as separate columns. So that you can store values from variables directly into respective columns.
Example:
v_fname='Hari';
v_lastname='Anil'
create table name_tab( first_name varchar(200), last_name varchar(200) );
Now you can prepare your insert statement as below:
insert into name_tab( first_name, last_name )
values( ?, ? );
Use prepared statement from you scripting language to set values for each of the parameters reading from variables.
simple way is
$v_fname='Hari';
$v_lastname='Anil';
$v_fullname= 'first name is :' + $v_fname + ' Last name is ' + $v_lastname;
insert into name_tab(fullname) values('$v_fullname');
otherwise use update query like
update name_tab SET fullname=CONCAT('first name is :', '$v_fname', ' Last name is ', '$v_lastname');
i think it will also add a record...
I am trying to create a stored that will accept two values, a column name and a value. It will then check if there is a record that exists for the passed in column name with the passed in value. I've tried the following
CREATE PROCEDURE p_HasActiveReference
#pi_colName varchar(100)
,#pi_colValue varchar(100)
AS
BEGIN
SET NOCOUNT ON
declare #sql varchar(1000)
set #sql = 'IF EXISTS(SELECT TOP 1 p.PaymentId
FROM Payments p
WHERE ' + #pi_colName + ' = ' + #pi_colValue + 'AND Active = 1)
SELECT ''True'' AS RETVAL
ELSE
SELECT ''False'' AS RETVAL'
exec(#sql)
END
However, I always get this error
Conversion failed when converting the varchar value 'InternalOr' to data type int.
When I call the procedure with the following
p_HasActiveReference 'InternalOrgCode', '10110'
The internalOrgCode column is of value varchar(10)
I am not a SQL expert, so I am not even sure if what I need to achieve is even possible using that technique!
Thanks!
At least one issue: you should be surrounding your string value with single quotes, and to escape those inside a string you need to double them up:
WHERE ' + #pi_colName + ' = ''' + #pi_colValue + ''' AND ...
You also may want to declare your #sql variable as something bigger than 100 characters! Looks like your string is getting truncated.
If the possible values for #pi_colName are finite, the data type is always string, and the columns are collation compatible, you could do something like this and avoid dynamic SQL:
SELECT ...
WHERE CASE #pi_colName
WHEN 'col1' THEN col1
WHEN 'col2' THEN col2
END = #pi_ColValue;
I create a table like
CREATE TABLE #tab(ID INT,Value FLOAT)
inside a loop (#n is counter)I insert elements dynamicaly:
SET #sql = 'INSERT #tab(ID,Value) SELECT '+#n+', SUM('+#x+'*'+#y+') FROM '+ #table_name;
when attempt to execute this:
Conversion failed when converting the varchar value 'INSERT #tab (ID,Value) SELECT ' to data type int.
I don't understand why it says convertion, as id is defined as INT.
How do you fix this query?
You can use the CAST function.
'SELECT '+ CAST(#n AS VARCHAR) +', SUM('+#x+'*'+#y+') FROM '
The error happened because you try to join a CHAR with a INT. The CHAR in this case is the 'SELECT ' string.
When the SQL query below is executed:
UPDATE shop_category
SET name = 'Secolul XVI - XVIII'
AND name_eng = '16th to 18th centuries'
WHERE category_id = 4768
The following error is raised:
1292 - Truncated incorrect DOUBLE value: 'Secolul XVI - XVIII'
How to fix this?
shop_category table structure:
category_id mediumint(8)
name varchar(250)
name_eng varchar(250)
You don't need the AND keyword. Here's the correct syntax of the UPDATE statement:
UPDATE
shop_category
SET
name = 'Secolul XVI - XVIII',
name_eng = '16th to 18th centuries'
WHERE
category_id = 4768
I was getting this exception not because of AND instead of comma, in fact I was having this exception just because I was not using apostrophes in where clause.
Like my query was
update table set coulmn1='something' where column2 in (00012121);
when I changed where clause to where column2 in ('00012121'); then the query worked fine for me.
What it basically is
It's incorrect syntax that causes MySQL to think you're trying to do something with a column or parameter that has the incorrect type "DOUBLE".
Learn from my mistake
In my case I updated the varchar column in a table setting NULL where the value 0 stood. My update query was like this:
UPDATE myTable SET myValue = NULL WHERE myValue = 0;
Now, since the actual type of myValue is VARCHAR(255) this gives the warning:
+---------+------+-----------------------------------------------+
| Level | Code | Message |
+---------+------+-----------------------------------------------+
| Warning | 1292 | Truncated incorrect DOUBLE value: 'value xyz' |
+---------+------+-----------------------------------------------+
And now myTable is practically empty, because myValue is now NULL for EVERY ROW in the table! How did this happen?
*internal screaming*
Over 30k rows now have missing data.
*internal screaming intensifies*
Thank goodness for backups. I was able to recover all the data.
*internal screaming intensity lowers*
The corrected query is as follows:
UPDATE myTable SET myValue = NULL WHERE myValue = '0';
^^^
Quotation here!
I wish this was more than just a warning so it's less dangerous to forget those quotes.
*End internal screaming*
Try replacing the AND with ,
UPDATE shop_category
SET name = 'Secolul XVI - XVIII', name_eng = '16th to 18th centuries'
WHERE category_id = 4768
The UPDATE Syntax shows comma should be used as the separator.
Mainly invalid query strings will give this warning.
Wrong due to a subtle syntax error (misplaced right parenthesis) when using INSTR function:
INSERT INTO users (user_name) SELECT name FROM site_users WHERE
INSTR(status, 'active'>0);
Correct:
INSERT INTO users (user_name) SELECT name FROM site_users WHERE
INSTR(status, 'active')>0;
I just wasted my time on this and wanted to add an additional case where this error presents itself.
SQL Error (1292): Truncated incorrect DOUBLE value: 'N0003'
Test data
CREATE TABLE `table1 ` (
`value1` VARCHAR(50) NOT NULL
);
INSERT INTO table1 (value1) VALUES ('N0003');
CREATE TABLE `table2 ` (
`value2` VARCHAR(50) NOT NULL
);
INSERT INTO table2 (value2)
SELECT value1
FROM table1
WHERE 1
ORDER BY value1+0
The problem is ORDER BY value1+0 - type casting.
I know that it does not answer the question but this is the first result on Google for this error and it should have other examples where this error presents itself.
It seems mysql handles the type casting gracefully with SELECT statements.
The shop_id field is of type varchar but the select statements works
select * from shops where shop_id = 26244317283;
But when you try updating the fields
update stores set store_url = 'https://test-url.com' where shop_id = 26244317283;
It fails with error Truncated incorrect DOUBLE value: '1t5hxq9'
You need to put the shop_id 26244317283 in quotes '26244317283' for the query to work since the field is of type varchar not int
update stores set store_url = 'https://test-url.com' where shop_id = '26244317283';
1292 - Truncated incorrect DOUBLE value:
This error occurs when you try to compare different types on SQL like `uniqueid` = 1610386969.1713 in this query:
UPDATE `cdr` SET `userfield`='survey=5,' WHERE `uniqueid` = 1610386969.1713
change it for passing the error on this UPDATE example:
UPDATE `cdr` SET `userfield`='survey=5,' WHERE `uniqueid` = '1610386969.1713'
But in your problem, if you change the AND to , the problem will be resolved
UPDATE shop_category SET name = 'Secolul XVI - XVIII', name_eng = '16th to 18th centuries' WHERE category_id = 4768
This is because of "and" in-between while using update query
WRONG ==> "update user_detail set name = ? and phone_code = ? and phone_num = ? and email = ? where emp_code = ?";
instead of this use COMMA(,)
RIGHT ==> "update user_detail set name = ?, phone_code = ?, phone_number = ?, email = ? where emp_code = ?"
If you're getting this problem with an insert that looks like the one below, the problem may simply be the lack of a space between -- and the comment text:
insert into myTable (a, b, c)
values (
123 --something
,345 --something else
,567 --something something else
);
The problem with this is that the --something should actually be -- something with a space.
I experienced this error when using bindParam, and specifying PDO::PARAM_INT where I was actually passing a string. Changing to PDO::PARAM_STR fixed the error.
I did experience this error when I tried doing an WHERE EXIST where the subquery matched 2 columns that accidentially was different types.
The two tables was also different storage engines.
One column was a CHAR (90) and the other was a BIGINT (20).
One table was InnoDB and the other was MEMORY.
Part of query:
[...] AND EXISTS (select objectid from temp_objectids where temp_objectids.objectid = items_raw.objectid );
Changing the column type on the one column from BIGINT to CHAR solved the issue.
// CALL `ut_liquid_name_maildt`() Edit
// Truncated incorrect DOUBLE value: 'IPPAGUNTA VIJAYALAKSHMI'
// Code Sample
BEGIN
-- Declare loop constructs --
DECLARE done INT DEFAULT FALSE;
DECLARE my_id VARCHAR(50);
DECLARE my_name VARCHAR(50);
DECLARE my_mail_dt date;
DECLARE my_name_gl VARCHAR(50);
DECLARE my_mail_dt_gl VARCHAR(50);
-- cursor --
declare cr cursor for select t2.id,t1.name,t1.mail_dt,t2.name as name_gl,t2.mail_dt as mail_dt_gl
from sch_acc_saleint as t1
inner join
sch_acc_salegl as t2
where t1.sch_batch = t2.sch_batch;
-- Declare Continue Handler --
DECLARE CONTINUE HANDLER FOR NOT FOUND SET done = TRUE;
OPEN cr;
read_loop: LOOP
-- Fetch data from cursor --
FETCH cr
INTO my_id,my_name,my_mail_dt,my_name_gl,my_mail_dt_gl;
-- Exit loop if finished --
IF done THEN
LEAVE read_loop;
END IF;
-- Update Query --
UPDATE sch_acc_salegl SET name = my_name and mail_dt = my_mail_dt WHERE id = my_id;
END LOOP read_loop;
CLOSE cr;
END
// I was using wrong update query that"s why it is showing error [ Truncated incorrect DOUBLE value ]
// For this type of error check update query
// For example :
UPDATE sch_acc_salegl SET name = my_name,mail_dt = my_mail_dt WHERE id = my_id;
In my case it was a Dreamweaver function that sanitizes the data before running mysql queries:
GetSQLValueString($my_string, "text")
by mistake I had it as:
GetSQLValueString($my_string, "int")
Basically converting my string to an integer then trying to run MySQL queries based on that. When it should have been a string.
So using "int" instead of "text" caused the problem for me.