MySQL Stored procedure IN parameter issue - mysql

In my Mysql , I have written below stored procedure to insert data into user table,
DELIMITER $$
DROP PROCEDURE IF EXISTS `CreateUser1`$$
CREATE PROCEDURE `CreateUser1`(
IN Email VARCHAR(50),
IN Password1 VARCHAR(50),
IN FirstName VARCHAR(50),
IN LastName VARCHAR(50),
IN AlternateEmail VARCHAR(50),
IN PhoneNumber VARCHAR(50),
IN Token VARCHAR(500)
)
BEGIN
IF NOT EXISTS( SELECT user_id FROM `um.user` WHERE `email`=Email)THEN
INSERT INTO `um.user`(site_id,email,PASSWORD,alternate_email,first_name,last_name,contact_number,
created_on,updated_on,is_active,token,is_verified_email)
VALUES
(1, Email1 , Password1 ,AlternateEmail, FirstName , LastName ,PhoneNumber,UTC_TIMESTAMP(),UTC_TIMESTAMP(),1,Token,0);
END IF;
END$$
DELIMITER ;
When i test this procedure as below,
CALL `CreateUser1`('ab1#ansys.com' , 'abcdefgh' ,'abc#gmail.com', 'sa' , '' ,'123456789','hasghsdfhgfhgfhdgfhdsgsh');
SELECT * FROM `um.user` WHERE email='ab1#ansys.com';
It does nothing.
It doesn't insert data into table, I figured out the issue .
The isssue is in parameter "Email".
But when I change the parameter "Email" to "Email12" , it worked as expected.
But I don't want to change in parameter as it will be a change in my API as well,
Now i want to solve this issue in sp level as well, I have tried below changes as well in SP which also doesn't works,
Set #userEmail=Email;
IF NOT EXISTS( SELECT user_id FROM `um.user` WHERE `email`=#userEmail)THEN
Any suggestions
Regards
Sangeetha

You may also qualify their identifiers. See 9.2.1 Identifier Qualifiers.
...
/*
-- You can also use Alias
SELECT `user_id`
FROM `um.user` `uu`
WHERE `uu`.`email` = `Email`
*/
IF NOT EXISTS (SELECT `user_id`
FROM `um.user`
WHERE `um.user`.`email` = `Email`) THEN
...
SQL Fiddle demo unqualified
SQL Fiddle demo qualified

Try this if you want to handle your issue within the stored procedure itself, without changing the name of parameter,
DELIMITER $$
DROP PROCEDURE IF EXISTS `CreateUser1`$$
CREATE PROCEDURE `CreateUser1`(
IN Email VARCHAR(50),
IN Password1 VARCHAR(50),
IN FirstName VARCHAR(50),
IN LastName VARCHAR(50),
IN AlternateEmail VARCHAR(50),
IN PhoneNumber VARCHAR(50),
IN Token VARCHAR(500)
)
BEGIN
DECLARE Email1 VARCHAR(50);
SET Email1 = Email;
IF NOT EXISTS( SELECT user_id FROM `um.user` WHERE `email`=Email1)THEN
INSERT INTO `um.user`(site_id,email,PASSWORD,alternate_email,first_name,last_name,contact_number,
created_on,updated_on,is_active,token,is_verified_email)
VALUES
(1, Email1 , Password1 ,AlternateEmail, FirstName , LastName ,PhoneNumber,UTC_TIMESTAMP(),UTC_TIMESTAMP(),1,Token,0);
END IF;
END$$
DELIMITER ;
This is because in MySQL, the parameter name passed to a Stored Procedure should not be the same as Column Name. Hope this solves your problem :)

Related

Couldn't get the call addusers procedure to work for testing because of auto increment

I have problem with Addusers procedure because I add UserID as out for auto increment since I basically want to pass:
CALL addusers
(
'Rory',
'Covertry',
'5566',
'rory#gmail.com'
'1234',
'U'
)
I'm expected to insert the data but I ended getting an error like this.
"Error
SQL query:
CALL addusers
(
'Rory',
'Covertry',
'5566',
'rory#gmail.com'
'1234',
'U'
)
MySQL said: Documentation
1318 - Incorrect number of arguments for PROCEDURE construction.addusers; expected 7, got 5"
Here's my stored procedure for
addusers
DELIMITER go
Create procedure Addusers(
Out UserID int(11),
IN FirstName varchar(30),
IN LastName varchar(30),
IN Password varchar(30),
IN EmailAddress varchar(30),
IN Salt varchar(40),
IN RoleID varchar(1))
BEGIN
insert into users(
FirstName,
LastName ,
Password ,
EmailAddress ,
Salt ,
RoleID
)
Values
(
FirstName,
LastName ,
Password ,
EmailAddress ,
Salt ,
RoleID
);
set UserID = AUTO_INCREMENT;
End
go
DELIMITER ;
You must use last_insert_id() instead of AUTO_INCREMENT reserved word, and put all 7 parameters when you do a call:
DELIMITER go
Create procedure Addusers(
Out UserID int(11),
IN FirstName varchar(30),
IN LastName varchar(30),
IN Password varchar(30),
IN EmailAddress varchar(30),
IN Salt varchar(40),
IN RoleID varchar(1))
BEGIN
insert into users(
FirstName,
LastName ,
Password ,
EmailAddress ,
Salt ,
RoleID
)
Values
(
FirstName,
LastName ,
Password ,
EmailAddress ,
Salt ,
RoleID
);
set UserID = last_insert_id();
End
go
DELIMITER ;
To get the OUT parameter you must use a session variable like this:
set #new_id = null;
call addusers(#new_id,'Rory','Covertry','5566','rory#gmail.com','1234','U' );
select #new_id; -- contains the inserted id

Stored procedure using insert and select statements

I want to get the adminID from ADMIN table using the email and save the adminID in the product table. I tried do that, it returns null in the adminID in Product table. Please let me know where I'm making a mistake.
CREATE PROCEDURE prc_saveProduct
(
IN inputuserEmail VARCHAR(255),
inputproductName VARCHAR(255),
inputpoints INT(11),
)
BEGIN
SET #AdminID = (SELECT AdminID FROM ADMIN WHERE email = inputuserEmail );
INSERT INTO PRODUCTS(AdminID, productName, points)
VALUES (#AdminID, inputproductName, inputpoints);
END
This will work.
DELIMITER $$
CREATE PROCEDURE `yourSchema`.`prc_saveProduct`(
p_inputuserEmail VARCHAR(255),
p_inputproductname VARCHAR(255),
p_inputpoints INT(11)
)
BEGIN
DECLARE _AdminID VARCHAR(255);
SELECT
AdminID FROM ADMIN WHERE email = p_inputuserEmail
INTO
_AdminID;
INSERT INTO PRODUCTS(
AdminID,
productName,
points
)
VALUES
(
_AdminID,
p_inputproductName,
p_inputpoints
);
END$$
DELIMITER ;
the p_ is not necessary, I just like to prepend proc params with it to distinguish it. The underscore I like to use for local variables "_AdminID", but that's not necessary either. I just prefer those naming conventions.

mysql Insert Statements in Stored Procedure not Inserting

I created a stored procedure which should perform the following:
Insert into Agencies Table, creating an id in the PK index row
Save the id in a variable
Insert the id and other data into Users table
The syntax below does not trigger any errors:
DELIMITER $$
CREATE PROCEDURE insertNewAgencyAndAdmin (IN aName varchar (100), IN numTrav int, IN polType int, IN uEmail varchar(255), IN uFName varchar(40), IN uLName varchar(40), IN uTitle varchar(100))
BEGIN
INSERT INTO btsAgency.Agencies (agencyName, numTrav, polType) VALUES (#aName, #numTrav, #polType);
SET #agencyID = (SELECT agencyID from btsAgency.Agencies where agencyID = LAST_INSERT_ID());
INSERT INTO btsUsers.Users (userAgencyID, userEmail, userFirstName, userLastName, userTitle ) VALUES
(#agencyID, #uEmail, #uFName, #uLName, #uTitle);
END
However, the Stored Proc doesn't insert my parameters into the tables when executed. So, after searching I try to create the SP like this (including $$ after "END" and resetting the delimiter to a semi-colon ):
DELIMITER $$
CREATE PROCEDURE insertNewAgencyAndAdmin (IN aName varchar (100), IN numTrav int, IN polType int, IN uEmail varchar(255), IN uFName varchar(40), IN uLName varchar(40), IN uTitle varchar(100))
BEGIN
INSERT INTO btsAgency.Agencies (agencyName, numTrav, polType) VALUES (#aName, #numTrav, #polType);
SET #agencyID = (SELECT agencyID from btsAgency.Agencies where agencyID = LAST_INSERT_ID());
INSERT INTO btsUsers.Users (userAgencyID, userEmail, userFirstName, userLastName, userTitle ) VALUES
(#agencyID, #uEmail, #uFName, #uLName, #uTitle);
END $$
DELIMITER ;
MySql creates the Stored Proc but gives me the following error:
1064 - You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'DELIMITER' at line 1
When I execute the created Stored Proc it still doesn't insert the data in my parameters.
Any help would be appreciated.
Some problems in your stored procedure:
It is important to indicate the difference between 9.4. User-Defined Variables and routine parameters 13.1.15. CREATE PROCEDURE and CREATE FUNCTION Syntax, are different variables (eg.: aName != #aName).
Avoid naming parameters or variables as columns of your tables.
DELIMITER $$
CREATE PROCEDURE `insertNewAgencyAndAdmin` (
/*
IN `aName` varchar (100),
IN `numTrav` int,
IN `polType` int,
IN `uEmail` varchar(255),
IN `uFName` varchar(40),
IN `uLName` varchar(40),
IN `uTitle` varchar(100)
*/
IN `_aName` varchar (100),
IN `_numTrav` int,
IN `_polType` int,
IN `_uEmail` varchar(255),
IN `_uFName` varchar(40),
IN `_uLName` varchar(40),
IN `_uTitle` varchar(100)
)
BEGIN
/*
INSERT INTO `btsAgency`.`Agencies` (
`agencyName`,
`numTrav`,
`polType`
) VALUES (
#`aName`,
#`numTrav`,
#`polType`
);
*/
INSERT INTO `btsAgency`.`Agencies` (
`agencyName`,
`numTrav`,
`polType`
) VALUES (
`_aName`,
`_numTrav`,
`_polType`
);
/*
SET #`agencyID` = (SELECT `agencyID` from `btsAgency`.`Agencies` where `agencyID` = LAST_INSERT_ID());
INSERT INTO `btsUsers`.`Users` (
`userAgencyID`,
`userEmail`,
`userFirstName`,
`userLastName`,
`userTitle`
) VALUES (
#`agencyID`,
#`uEmail`,
#`uFName`,
#`uLName`,
#`uTitle`
);
*/
INSERT INTO `btsUsers`.`Users` (
`userAgencyID`,
`userEmail`,
`userFirstName`,
`userLastName`,
`userTitle`
) VALUES (
LAST_INSERT_ID(),
`_uEmail`,
`_uFName`,
`_uLName`,
`_uTitle`);
END$$
DELIMITER ;
SELECT * FROM discounts $$
delimiter $$;
CREATE PROCEDURE insertData(IN id int,IN title varchar(255),IN amount decimal)
BEGIN
insert into discounts values (id,title,amount);
END; $$
call insertData(3,"sadasd",56);
/*DROP PROCEDURE insertData */

MySql set variable using Select

I have a stored procedure as
DELIMITER $$
CREATE PROCEDURE GetInfo(
in userid varchar (150),
out fname varchar (50),
out lname varchar (50),
out user_status varchar (30),
out reg_date DATETIME
)
BEGIN
select fname=users_table.first_name,
lname=users_table.last_name,
user_status=users_table.user_status,
reg_date=users_table.reg_date
FROM users_table
WHERE users_table.userid=userid;
END$$
I am using it like
SET #fname=#lname=#user_status=#reg_date=NULL;
CALL GetInfo(
'XYZ',
#fname,
#lname,
#user_status,
#reg_date
);
SELECT #fname,#lname,#user_status,#reg_date;
But I am getting only NULL values. I think that problem is with variable assignment using Select statement.
I know that in MSSQLSERVER, we can assign variable in SELECT statement as I have but I am not sure about MySQL.
You must change the SQL in you procedure:
DELIMITER $$
CREATE PROCEDURE GetInfo(
in userid varchar (150),
out fname varchar (50),
out lname varchar (50),
out p_user_status varchar (30),
out p_reg_date DATETIME
)
BEGIN
select users_table.first_name,
users_table.last_name,
users_table.user_status,
users_table.reg_date
into fname,lname,p_user_status,p_reg_date
FROM users_table
WHERE users_table.userid=userid
limit 1;
END$$
Variable names must be different than fields
And will work

MySQL Stored Procedure syntax error with table variable

I have this MySQL query to create a stored procedure:
Delimiter //;
Create Procedure addUser(
IN facebookId varchar(20),
IN name varchar(50),
In accessToken varchar(100),
in expires float)
Begin
Declare invitingUsers Table(Id varchar(20));
Insert Into Users
(`Facebook_Id`,`Name`,`Access_Token`,`Expired`) Values (facebookId,name,accessToken,expires);
Select Inviting_Id
From Invited_Users
Where Invited_Id = facebookId
Into invitingUsers;
Update Table Users
Set Credit = Credit + 1
Where Facebook_Id In (Select Id From invitingUsers);
End//
but I'm keep getting this error - can't understand why:
#1064 - You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'Table(Id varchar(20)); Insert Into Users (`Facebook' at line 7
Change #1
Delimiter //; to Delimiter //
Change #2
Create a Temp Table in Memory
Change #3
Changed
Select Inviting_Id
From Invited_Users
Where Invited_Id = facebookId
Into invitingUsers;
into
INSERT INTO invitingUsers
Select Inviting_Id From Invited_Users
Where Invited_Id = facebookId;
With these changes I give you this:
Delimiter //
Create Procedure addUser(
IN facebookId varchar(20),
IN name varchar(50),
In accessToken varchar(100),
in expires float)
Begin
Declare invitingUsers Table(Id varchar(20));
Create temporary table if not exists invitingUsers
(Id varchar(20), PRIMARY KEY (id)) ENGINE=MEMORY;
Insert Into Users
(`Facebook_Id`,`Name`,`Access_Token`,`Expired`)
Values (facebookId,name,accessToken,expires);
INSERT INTO invitingUsers
Select Inviting_Id From Invited_Users
Where Invited_Id = facebookId;
Update Table Users
Set Credit = Credit + 1
Where Facebook_Id In (Select Id From invitingUsers);
End//
Delimiter ;
Give it a Try !!!