I'm trying since a few hours to set up a mail server in Gitlab(omnibus) using mailjet.
In the mailjet smtp settings I've got some credentials:
-Username(API Key)
-Password(Secret Key)
-SMTP Server ....mailjet.com
-Port: 25 or 587 (some providers block port 25)
-Use TLS : optional
The Configs in gitlab.rb look like this:
################################
# GitLab email server settings #
################################
gitlab_rails['smtp_enable'] = true
gitlab_rails['smtp_address'] = "....mailjet.com"
gitlab_rails['smtp_port'] = 587
gitlab_rails['smtp_user_name'] = "(Username(API Key))"
gitlab_rails['smtp_password'] = "(Password(Secret Key))"
gitlab_rails['smtp_domain'] = "my websites domain"
gitlab_rails['smtp_authentication'] = "login"
gitlab_rails['smtp_enable_starttls_auto'] = true
gitlab_rails['smtp_tls'] = true
This doesn't work.
Is it correct to use the websites domain as 'smtp_domain' or should I use ...mailjet.com?
Does somebody knows how to set this up?
Here are some examples how to do the setup but no informations about mailjet.
Help would be greatly appreciated.
I got help from mailjet support and it works now.
Use port 80 and disable tls and ssl.
gitlab_rails['smtp_enable'] = true
gitlab_rails['smtp_address'] = "....mailjet.com"
gitlab_rails['smtp_port'] = 80
gitlab_rails['smtp_user_name'] = "(Username(API Key))"
gitlab_rails['smtp_password'] = "(Password(Secret Key))"
gitlab_rails['smtp_domain'] = "....mailjet.com"
gitlab_rails['smtp_authentication'] = "login"
Related
Such a problem, there is a server (cluster) on which smb is used, the server is entered into the AD domain, sometimes it is necessary to restart the smbd service (reload won't fit), but at the same time there is some copying of the file on the client (windows), then the load is interrupted, and after the klick "Retry" button, the download starts from the very beginning. Is it possible to do something like that so that the load continues to go from the moment where it was interrupted, maybe you need to configure the client like that. client connects as SMBv3 or SMBv2
server on ubuntu 18.04.
smb created at zfs
smb.conf:
[global]
workgroup = TEST247
realm = test247.ru
security = ads
auth methods = winbind
interfaces = 172.16.11.170/24
bind interfaces only = yes
netbios name = SERVER
encrypt passwords = true
map to guest = Bad User
max log size = 300
dns proxy = no
socket options = TCP_NODELAY
domain master = no
local master = no
preferred master = no
os level = 0
domain logons = no
load printers = no
show add printer wizard = no
log level = 0 vfs:2
max log size = 0
syslog = 0
printcap name = /dev/null
disable spoolss = yes
name resolve order = lmhosts wins host bcast
machine password timeout = 604800
name cache timeout = 660
idmap config TEST247 : backend = rid
idmap config TEST247 : base_rid = 0
idmap config TEST247 : range = 100000 - 200000
idmap config * : range = 200001-300000
idmap config * : backend = tdb
idmap cache time = 604800
idmap negative cache time = 60
winbind rpc only = yes
winbind cache time = 120
winbind enum groups = yes
winbind enum users = yes
winbind max domain connections = 10
winbind use default domain = yes
winbind refresh tickets = yes
winbind reconnect delay = 15
winbind request timeout = 25
winbind separator = ^
private dir = /var/lib/samba/private
lock directory = /run/samba
state directory = /var/lib/samba
cache directory = /var/cache/samba
pid directory = /run/samba
log file = /var/log/samba/smb.%m
include = /etc/samba/smb-res.conf
testparm:
testparm -s /etc/samba/smb.conf
Load smb config files from /etc/samba/smb.conf
WARNING: The "auth methods" option is deprecated
WARNING: The "syslog" option is deprecated
Loaded services file OK.
Server role: ROLE_DOMAIN_MEMBER
smb-res.conf:
[test109_smb]
comment = test109_smb share
path = /config/pool/test109/smb
browseable = yes
writable = yes
inherit acls = yes
inherit owner = no
inherit permissions = yes
map acl inherit = yes
nt acl support = yes
create mask = 0777
force create mode = 0777
force directory mode = 0777
store dos attributes = yes
public = no
admin users =
valid users =
write list =
read list =
invalid users =
vfs objects = acl_xattr
full_audit:prefix = %S|%u|%I
full_audit:facility = local5
full_audit:priority = notice
full_audit:success = none
full_audit:failure = none
shadow: snapdir = .zfs/snapshot
shadow: sort = desc
shadow: localtime = yes
shadow: format = shadow_%d.%m.%Y-%H:%M:%S
worm: grace_period = 30
cryptfile: method = grasshopper
Resuming a copy operation doesn't depend on the smb client or server, but on the application which is doing the copying.
The standard Windows copy doesn't know to resume.
Other (third party) apps (maybe Total Commander?) can be more intelligent about it. You could even write your own app to do a smart copy.
I've just followed a guide on installing Samba, adding a samba user and configuring the smb.conf file
[global]
workgroup = SAMBA
security = user
passdb backend = tdbsam
printing = cups
printcap name = cups
load printers = yes
cups options = raw
[homes]
comment = Home Directories
valid users = %S, %D%w%S
browseable = No
read only = No
inherit acls = Yes
[printers]
comment = All Printers
path = /var/tmp
printable = Yes
create mask = 0600
browseable = No
[print$]
comment = Printer Drivers
path = /var/lib/samba/drivers
write list = #printadmin root
force group = #printadmin
create mask = 0664
directory mask = 0775
[Stuff]
path = /mystuff
guest ok = no
available = yes
valid users = livingroom
read only = no
browsable = yes
writeable = yes
On my Win10 machine I can \192.168.100.6 and get prompted for login (username livingroom) which it accepts. I then see two folders in explorer - 'livingroom' and 'Stuff'
However when I double-click either of them it will try for a while before eventually failing with Error code: 0x80070043 - The network name cannot be found.
Any ideas why its saying the network name cannot be found when i'm using the IP address to access it?
Writing some capybara integration/feature tests for my Rails 5 app & they keep failing b/c none of the JS loads. When I looked into it, I saw that in my test env, the script looks like this:
<script src="/assets/application.debug-c0cceddfe5721264a37a27717e21b167d46fd27617e66e210764c0dfd36b5992.js"></script>
But when it's loaded with selenium, the script looks like this:
<script src="http://127.0.0.1/assets_test/application-5c233b506cd224705939cbe7104615eba3c0f51d572dba60e074395a6346472a.js"></script>
Notice how it now has the host explicit. However, the test runs on a separate port, for example :56789, so the test JS doesn't load since the port isn't specified.
When I go to the link in the above src in the test environment, I get nothing. However, when I add the port number being used for this test, I see the JS file just fine.
What gives? To properly run my integration test, I need to be able to load this JS, and I'm at a complete loss on how to do that.
Here is my configuration:
test.rb
Rails.application.configure do
config.action_controller.asset_host = "file://#{::Rails.root}/public"
config.assets.prefix = 'assets_test'
config.action_controller.asset_host = "127.0.0.1"
config.serve_static_assets = true
config.action_mailer.default_url_options = { host: 'localhost', port: 3000 }
config.cache_classes = false
config.action_view.cache_template_loading = true
config.eager_load = false
config.public_file_server.enabled = true
config.public_file_server.headers = {
'Cache-Control' => "public, max-age=#{1.hour.to_i}"
}
config.consider_all_requests_local = true
config.action_controller.perform_caching = false
config.cache_store = :null_store
config.action_dispatch.show_exceptions = false
config.action_controller.allow_forgery_protection = false
config.active_storage.service = :test
config.action_mailer.perform_caching = false
config.action_mailer.delivery_method = :test
config.active_support.deprecation = :stderr
end
Figured it out. Commented these lines out and it works:
#config.action_controller.asset_host = "file://#{::Rails.root}/public"
#config.assets.prefix = 'assets_test'
#config.action_controller.asset_host = "127.0.0.1"
#config.serve_static_assets = true
Not sure how they ended up in my code in the first place.
I configured GitLab on Google Cloud Platform to send mail. This is the configuration
root#mojlab:/home/d# cat /etc/gitlab/gitlab.rb
...
nginx['listen_addresses'] = ["0.0.0.0", "[::]"]
gitlab_rails['smtp_enable'] = true
gitlab_rails['smtp_address'] = "smtp.sendgrid.net"
gitlab_rails['smtp_port'] = 587
gitlab_rails['smtp_user_name'] = "du"
gitlab_rails['smtp_password'] = "fakePas$"
gitlab_rails['smtp_domain'] = "smtp.sendgrid.net"
gitlab_rails['smtp_authentication'] = "login"
gitlab_rails['smtp_enable_starttls_auto'] = true
gitlab_rails['smtp_tls'] = false
root#mojlab:/home/d#
Mail messages I get are from a GitLab address name and the GitLab sender name.
I am trying to change the sender name. I change a file /opt/gitlab/embedded/service/gitlab-rails/config/gitlab.yml in the line 42 from
email_display_name:
to
email_display_name: NewName
but after a command gitlab-ctl reconfigure the change disappears. The value turns back to blank.
How to change the sender name?
If you do have a gitlab.rb, it would be best to try and set that parameter in gitlab.rb, not in gitlab.yml.
See this diff for example.
gitlab_rails['gitlab_email_display_name'] = 'Example'
Then try the gitlab-ctl reconfigure again, which will take into account gitlab.rb value.
I want to learn yii as my first framework. And I'm trying to make the contact form work. But I got this error:
I've already configured php.ini file from:
C:\wamp\bin\php\php5.3.0
And changed the default to these values:
[mail function]
; For Win32 only.
; http://php.net/smtp
SMTP = ssl:smtp.gmail.com
; http://php.net/smtp-port
smtp_port = 23
; For Win32 only.
; http://php.net/sendmail-from
sendmail_from = myemail#gmail.com
I've seen from here that gmail doesn't use port 25, which is the default in the php.ini. So I used 23. And also opened that port in the windows 7 firewall. Via inbound rules.
Then I also edited the main config in my yii application, to match the email that I'm using:
// application-level parameters that can be accessed
// using Yii::app()->params['paramName']
'params'=>array(
// this is used in contact page
'adminEmail'=>'myemail#gmail.com',
),
);
Finally, I restarted wampserver. Then cleared all my browsing data. Why then to I still see that its pointing out port 25 in the error. Have I miss something? Please help.
Heres a simple python script which could allow you to run a mail server on localhost, you dont have to change anything. Sorry if im a bit late.
import smtpd
import smtplib
import asyncore
class SMTPServer(smtpd.SMTPServer):
def __init__(*args, **kwargs):
print "Running fake smtp server on port 25"
smtpd.SMTPServer.__init__(*args, **kwargs)
def process_message(*args, **kwargs):
to = args[3][0]
msg = args[4]
gmail_user = 'yourgmailhere'
gmail_pwd = 'yourgmailpassword'
smtpserver = smtplib.SMTP("smtp.gmail.com",587)
smtpserver.ehlo()
smtpserver.starttls()
smtpserver.ehlo
smtpserver.login(gmail_user, gmail_pwd)
smtpserver.sendmail(gmail_user, to, msg)
print 'sent to '+to
pass
if __name__ == "__main__":
smtp_server = SMTPServer(('localhost', 25), None)
try:
asyncore.loop()
except KeyboardInterrupt:
smtp_server.close()
#end of code
Note: I used args[3][0] and args[4] as to address and message as the args sent by my php mail() corresponded to an array of args[3][0] as receipent email
If you open the php.ini file in WAMP, you will find these two lines:
smtp_server
smtp_port
Add the server and port number for your host (you may need to contact them for details)
The following two lines don't exist by default:
auth_username
auth_password
So you will need to add them to be able to send mail from a server that requires authentication. So an example may be:
smtp_server = mail.example.com
smtp_port = 25
auth_username = example_username#example.com
auth_password = example_password
ps: you should not use your personal mail here. for an obvious reason.
If using WAMP, the php.ini to be configured is present in the wamp/bin/apache/Apache_x_y/bin folder
where _x_y is related to the version of the Apache build used by your wamp installation
uncomment extension=php_openssl.dll at php.ini in WAMP server ("D:\wamp\bin\apache\Apache2.4.4\bin\php.ini")
In the file "D:\wamp\www\mantisbt-1.2.15\config_inc.php"
# --- Email Configuration ---
$g_phpMailer_method = PHPMAILER_METHOD_SMTP;
$g_smtp_host = 'smtp.gmail.com';
$g_smtp_connection_mode = 'ssl';
$g_smtp_port = 465;
$g_smtp_username = 'yourmail#gmail.com';
$g_smtp_password = 'yourpwd';
$g_enable_email_notification = ON;
$g_log_level = LOG_EMAIL | LOG_EMAIL_RECIPIENT;
$g_log_destination = 'file:/tmp/log/mantisbt.log';
$g_administrator_email = 'administrator#example.com';
$g_webmaster_email = 'webmaster#example.com';
$g_from_email = 'noreply#example.com';
$g_return_path_email = 'admin#example.com';
$g_from_name = 'Mantis Bug Tracker';
$g_email_receive_own = OFF;
$g_email_send_using_cronjob = OFF;