I have a problem. I need to set following in a Document which is written on WordML.
Set Header and Footer in the document
Set an Image in the document
Set a Heading and center it
So far I have tried out these.
<w:p>
<w:pPr>
<w:jc w:val="center"/>
<w:b w:val="on"/>
</w:pPr>
<w:r>
<w:t>ABC COMPANY PRIVATE LIMITED</w:t>
</w:r>
<w:br/>
<w:r>
<w:u w:val="single"/>
<w:t>QUOTA APPLICATION FORM</w:t>
</w:r>
</w:p>
Thanks In Advance.
Set an Image to a Document (WordML)
<w:pict>
<w:binData w:name="wordml://02000001.jpg">/9j/4AA..Xof/9k=</w:binData>
<v:shape id="_x0000_i1025" style="width:100%;height:auto" type="#_x0000_t75">
<v:imagedata o:title="network" src="wordml://02000001.jpg"/>
</v:shape>
</w:pict>
Set a Heading and center it
<w:p>
<w:pPr>
<w:jc w:val="center"/>
</w:pPr>
<w:r>
<w:t>Hello, World.</w:t>
</w:r>
<w:br/>
<w:r>
<w:t>How are you, today?</w:t>
</w:r>
</w:p>
For more information regarding WordML refer this link.
http://rep.oio.dk/microsoft.com/officeschemas/wordprocessingml_article.htm
Related
part of word document xml:
<w:p w14:paraId="1A403538" w14:textId="03591853" w:rsidR="00280630" w:rsidRDefault="00280630" w:rsidP="00280630">
<w:pPr>
<w:pStyle w:val="Heading1"/>
<w:rPr>
<w:lang w:val="en-US"/>
</w:rPr>
</w:pPr>
<w:r>
<w:rPr>
<w:lang w:val="en-US"/>
</w:rPr>
<w:lastRenderedPageBreak/>
<w:t>Chapter to Hide</w:t>
</w:r>
</w:p>
I would like to add a <w:vanish/> element programmatically where it is seen below:
<w:p w14:paraId="1A403538" w14:textId="03591853" w:rsidR="00280630" w:rsidRPr="000E4C6C" w:rsidRDefault="00280630" w:rsidP="00280630">
<w:pPr>
<w:pStyle w:val="Heading1"/>
<w:rPr>
<w:vanish/>
<w:lang w:val="en-US"/>
</w:rPr>
</w:pPr>
<w:r w:rsidRPr="000E4C6C">
<w:rPr>
<w:vanish/>
<w:lang w:val="en-US"/>
</w:rPr>
<w:lastRenderedPageBreak/>
<w:t>Chapter to Hide</w:t>
</w:r>
</w:p>
What I want to do would be something like this:
from docx import Document
doc = Document("invitation.docx")
for paragraph in doc.paragraphs:
p = paragraph._element
if '''(paraId == "1A403538")''':
run_pr = p.xpath('./w:pPr/w:rPr')
# append <vanish/>
Something I tried:
import xml.etree.ElementTree as ET
from xml.dom import minidom
trees = minidom.parse("document.xml")
tagnames = trees.getElementsByTagName("w:rPr")
for tag in tagnames:
child = ET.fromstring("<vanish/>")
tag.appendChild(child)
I get the following error from line tag.appendChild(child):
AttributeError: 'xml.etree.ElementTree.Element' object has no attribute 'nodeType'
I have created an XSLT file that converts everything in a Word XML into clean HTML however I am unable to covert nested lists properly.
I saved a word v16.12 file into XML. The Word file contains two lists
Here is the exported Open XML (relating to just the bullets).
<w:body>
<w:p w:rsidR="00875AF6" w:rsidRDefault="007A38EC" w:rsidP="007A38EC">
<w:pPr>
<w:pStyle w:val="ListParagraph"/>
<w:numPr>
<w:ilvl w:val="0"/>
<w:numId w:val="1"/>
</w:numPr>
</w:pPr>
<w:r>
<w:t>List 1 Bullet 1 level 1</w:t>
</w:r>
</w:p>
<w:p w:rsidR="007A38EC" w:rsidRDefault="007A38EC" w:rsidP="007A38EC">
<w:pPr>
<w:pStyle w:val="ListParagraph"/>
<w:numPr>
<w:ilvl w:val="0"/>
<w:numId w:val="1"/>
</w:numPr>
</w:pPr>
<w:r>
<w:t>List 1 Bullet 2 level 1</w:t>
</w:r>
</w:p>
<w:p w:rsidR="007A38EC" w:rsidRDefault="007A38EC" w:rsidP="007A38EC">
<w:pPr>
<w:pStyle w:val="ListParagraph"/>
<w:numPr>
<w:ilvl w:val="1"/>
<w:numId w:val="1"/>
</w:numPr>
</w:pPr>
<w:r>
<w:t>List 1 Bullet 3 level 2</w:t>
</w:r>
</w:p>
<w:p w:rsidR="007A38EC" w:rsidRDefault="007A38EC" w:rsidP="007A38EC">
<w:pPr>
<w:pStyle w:val="ListParagraph"/>
<w:numPr>
<w:ilvl w:val="2"/>
<w:numId w:val="1"/>
</w:numPr>
</w:pPr>
<w:r>
<w:t>List 1 Bullet 4 level 3</w:t>
</w:r>
</w:p>
<w:p w:rsidR="007A38EC" w:rsidRDefault="007A38EC" w:rsidP="007A38EC">
<w:pPr>
<w:pStyle w:val="ListParagraph"/>
<w:numPr>
<w:ilvl w:val="2"/>
<w:numId w:val="1"/>
</w:numPr>
</w:pPr>
<w:r>
<w:t>List 1 Bullet 5 level 3</w:t>
</w:r>
</w:p>
<w:p w:rsidR="007A38EC" w:rsidRDefault="007A38EC" w:rsidP="007A38EC">
<w:pPr>
<w:pStyle w:val="ListParagraph"/>
<w:numPr>
<w:ilvl w:val="1"/>
<w:numId w:val="1"/>
</w:numPr>
</w:pPr>
<w:r>
<w:t>List 1 Bullet 6 level 2</w:t>
</w:r>
</w:p>
<w:p w:rsidR="007A38EC" w:rsidRDefault="007A38EC" w:rsidP="007A38EC">
<w:pPr>
<w:pStyle w:val="ListParagraph"/>
<w:numPr>
<w:ilvl w:val="2"/>
<w:numId w:val="1"/>
</w:numPr>
</w:pPr>
<w:r>
<w:t>List 1 Bullet 7 level 3</w:t>
</w:r>
</w:p>
<w:p w:rsidR="007A38EC" w:rsidRDefault="007A38EC" w:rsidP="007A38EC">
<w:pPr>
<w:pStyle w:val="ListParagraph"/>
<w:numPr>
<w:ilvl w:val="0"/>
<w:numId w:val="1"/>
</w:numPr>
</w:pPr>
<w:r>
<w:t>List 1 Bullet 8 level 1</w:t>
</w:r>
</w:p>
<w:p w:rsidR="007A38EC" w:rsidRDefault="007A38EC" w:rsidP="00575241"/>
<w:p w:rsidR="00575241" w:rsidRDefault="00575241" w:rsidP="00575241">
<w:r>
<w:t>This is a break</w:t>
</w:r>
</w:p>
<w:p w:rsidR="00575241" w:rsidRDefault="00575241" w:rsidP="00575241"/>
<w:p w:rsidR="007A38EC" w:rsidRDefault="007A38EC" w:rsidP="00575241">
<w:pPr>
<w:pStyle w:val="ListParagraph"/>
<w:numPr>
<w:ilvl w:val="0"/>
<w:numId w:val="2"/>
</w:numPr>
</w:pPr>
<w:r>
<w:t>List 2 Bullet 1 level 1</w:t>
</w:r>
</w:p>
<w:p w:rsidR="007A38EC" w:rsidRDefault="007A38EC" w:rsidP="00575241">
<w:pPr>
<w:pStyle w:val="ListParagraph"/>
<w:numPr>
<w:ilvl w:val="1"/>
<w:numId w:val="2"/>
</w:numPr>
</w:pPr>
<w:r>
<w:t>List 2 Bullet 2 level 2</w:t>
</w:r>
</w:p>
<w:p w:rsidR="007A38EC" w:rsidRDefault="007A38EC" w:rsidP="00575241">
<w:pPr>
<w:pStyle w:val="ListParagraph"/>
<w:numPr>
<w:ilvl w:val="2"/>
<w:numId w:val="2"/>
</w:numPr>
</w:pPr>
<w:r>
<w:t>List 2 Bullet 3 level 3</w:t>
</w:r>
</w:p>
<w:p w:rsidR="007A38EC" w:rsidRDefault="007A38EC" w:rsidP="00575241">
<w:pPr>
<w:pStyle w:val="ListParagraph"/>
<w:numPr>
<w:ilvl w:val="0"/>
<w:numId w:val="2"/>
</w:numPr>
</w:pPr>
<w:r>
<w:t>List 2 Bullet 4 level 1</w:t>
</w:r>
</w:p>
<w:p w:rsidR="007A38EC" w:rsidRDefault="007A38EC" w:rsidP="00575241">
<w:pPr>
<w:pStyle w:val="ListParagraph"/>
<w:numPr>
<w:ilvl w:val="1"/>
<w:numId w:val="2"/>
</w:numPr>
</w:pPr>
<w:r>
<w:t>List 2 Bullet 5 level 2</w:t>
</w:r>
</w:p>
<w:p w:rsidR="007A38EC" w:rsidRDefault="007A38EC" w:rsidP="00575241">
<w:pPr>
<w:pStyle w:val="ListParagraph"/>
<w:numPr>
<w:ilvl w:val="1"/>
<w:numId w:val="2"/>
</w:numPr>
</w:pPr>
<w:r>
<w:t>List 2 Bullet 6 level 2</w:t>
</w:r>
</w:p>
<w:p w:rsidR="007A38EC" w:rsidRDefault="007A38EC" w:rsidP="00575241">
<w:pPr>
<w:pStyle w:val="ListParagraph"/>
<w:numPr>
<w:ilvl w:val="2"/>
<w:numId w:val="2"/>
</w:numPr>
</w:pPr>
<w:r>
<w:t>List 2 Bullet 7 level 3</w:t>
</w:r>
<w:bookmarkStart w:id="0" w:name="_GoBack"/>
<w:bookmarkEnd w:id="0"/>
</w:p>
<w:p w:rsidR="007A38EC" w:rsidRDefault="007A38EC" w:rsidP="00575241">
<w:pPr>
<w:pStyle w:val="ListParagraph"/>
<w:numPr>
<w:ilvl w:val="1"/>
<w:numId w:val="2"/>
</w:numPr>
</w:pPr>
<w:r>
<w:t>List 2 Bullet 8 level 2</w:t>
</w:r>
</w:p>
<w:p w:rsidR="007A38EC" w:rsidRDefault="007A38EC" w:rsidP="00575241"/>
<w:sectPr w:rsidR="007A38EC" w:rsidSect="00D678D3">
<w:pgSz w:w="11900" w:h="16840"/>
<w:pgMar w:top="1440" w:right="1440" w:bottom="1440" w:left="1440"
w:header="708" w:footer="708" w:gutter="0"/>
<w:cols w:space="708"/>
<w:docGrid w:linePitch="360"/>
</w:sectPr>
</w:body>
Using XSLT I need to convert the XML into this HTML
<ul>
<li>List 1 Bullet 1 level 1</li>
<li>List 1 Bullet 2 level 1
<ul>
<li>List 1 Bullet 3 level 2
<ul>
<li>List 1 Bullet 4 level 3</li>
<li>List 1 Bullet 5 level 3</li>
</ul>
</li>
<li>List 1 Bullet 6 level 2
<ul>
<li>List 1 Bullet 7 level 3</li>
</ul>
</li>
</ul>
</li>
<li>List 1 Bullet 8 level 1</li>
</ul>
<p>This is a gap</p>
<ul>
<li>List 2 Bullet 1 level 1
<ul>
<li>List 2 Bullet 2 level 2
<ul>
<li>List 2 Bullet 3 level 3</li>
</ul>
</li>
</ul>
</li>
<li>List 2 Bullet 4 level 1
<ul>
<li>List 2 Bullet 5 level 2</li>
<li>List 2 Bullet 6 level 2
<ul>
<li>List 2 Bullet 7 level 3</li>
</ul>
</li>
<li>List 2 Bullet 8 level 2</li>
</ul>
</li>
</ul>
I have researched and the closest I found to was using a function and for-each-group like the below.
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:mf="http://example.com/mf" version="2.0"
exclude-result-prefixes="xs mf">
<xsl:strip-space elements="*"/>
<xsl:output indent="yes"/>
<xsl:function name="mf:group" as="node()*">
<xsl:param name="nodes" as="node()*"/>
<xsl:param name="level" as="xs:integer"/>
<xsl:if test="$nodes">
<list type="ul">
<xsl:for-each-group select="$nodes"
group-adjacent="boolean(self::*[#level = $level])">
<xsl:choose>
<xsl:when test="current-grouping-key()">
<xsl:apply-templates select="current-group()"/>
</xsl:when>
<xsl:otherwise>
<xsl:sequence select="mf:group(current-group(), $level + 1)"/>
</xsl:otherwise>
</xsl:choose>
</xsl:for-each-group>
</list>
</xsl:if>
</xsl:function>
<xsl:template match="#* | node()">
<xsl:copy>
<xsl:apply-templates select="#*, node()"/>
</xsl:copy>
</xsl:template>
<xsl:template match="item[#level]">
<item>
<xsl:apply-templates/>
</item>
</xsl:template>
<xsl:template match="test">
<xsl:copy>
<xsl:for-each-group select="*" group-adjacent="boolean(self::item)">
<xsl:choose>
<xsl:when test="current-grouping-key()">
<xsl:sequence select="mf:group(current-group(), 0)"/>
</xsl:when>
<xsl:otherwise>
<xsl:apply-templates select="current-group()"/>
</xsl:otherwise>
</xsl:choose>
</xsl:for-each-group>
</xsl:copy>
</xsl:template>
</xsl:stylesheet>
Unfortunately using functions and the for-each-group is beyond my ability. My question is how would I amend the above XSLT to work with the XML that I am getting from Word?
First off, we'll start with an identity template:
<xsl:template match="#* | node()">
<xsl:copy>
<xsl:apply-templates select="#*, node()"/>
</xsl:copy>
</xsl:template>
Second, we have to match the root node w:body and group the elements using xsl:for-each-group. Afterwards, we'll store the nodes in a variable (firstpass) to further manipulate the nodes later, such as:
<!-- If you want to specify the target node (1 in 22 as you say),
you can adjust the xpath below to match your target node.
-->
<xsl:template match="w:body">
<xsl:variable name="firstPass">
<xsl:for-each-group select="*" group-adjacent="boolean(self::w:p[descendant::w:ilvl])">
<xsl:choose>
<xsl:when test="current-grouping-key()">
<!-- the zero (0) was obtained from the value of
w:val attribute of w:ilvl node -->
<xsl:sequence select="mf:group(current-group(), 0)"/>
</xsl:when>
<xsl:otherwise>
<xsl:apply-templates select="current-group()"/>
</xsl:otherwise>
</xsl:choose>
</xsl:for-each-group>
</xsl:variable>
<xsl:apply-templates select="$firstPass/node()"/>
</xsl:template>
we can adapt the function that you mentioned. We can modify the group-adjacent target nodes to
<xsl:function name="mf:group" as="node()*">
<xsl:param name="nodes" as="node()*"/>
<xsl:param name="level" as="xs:integer"/>
<xsl:if test="$nodes">
<ul>
<xsl:for-each-group select="$nodes"
group-adjacent="boolean(self::*[descendant::w:ilvl/#w:val = $level])">
<xsl:choose>
<xsl:when test="current-grouping-key()">
<xsl:apply-templates select="current-group()"/>
</xsl:when>
<xsl:otherwise>
<xsl:sequence select="mf:group(current-group(), $level + 1)"/>
</xsl:otherwise>
</xsl:choose>
</xsl:for-each-group>
</ul>
</xsl:if>
</xsl:function>
The following are the templates needed for the cleanup
<xsl:template match="w:p">
<xsl:apply-templates select="descendant::w:t"/>
</xsl:template>
<xsl:template match="w:p[.='']|w:sectPr"/>
<xsl:template match="w:t">
<xsl:choose>
<xsl:when test="ancestor::w:p[descendant::w:pStyle[#w:val='ListParagraph']]">
<li>
<xsl:apply-templates/>
</li>
</xsl:when>
<xsl:otherwise>
<p>
<xsl:apply-templates/>
</p>
</xsl:otherwise>
</xsl:choose>
</xsl:template>
After that, we still need to insert the <ul> sublevels into parent <li>. To do that, we have to do a second pass of transformation.
We will now then match the nodes present in the firstpass variable
<xsl:template match="li[following-sibling::*[1][name()='ul']]">
<xsl:copy>
<xsl:apply-templates/>
<!-- this will copy the target ul nodes, albeit in a different mode -->
<xsl:apply-templates select="following-sibling::*[1][name()='ul']" mode="transfer"/>
</xsl:copy>
</xsl:template>
<!-- this will delete the target node -->
<xsl:template match="ul[preceding-sibling::*[1][name()='li']]"/>
and an identity template for the other mode
<xsl:template match="#* | node()" mode="transfer">
<xsl:copy>
<xsl:apply-templates select="#*, node()"/>
</xsl:copy>
</xsl:template>
The whole stylesheet is as follows:
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns:mf="http://example.com/mf"
xmlns:w="www.wnamespace.com"
version="2.0"
exclude-result-prefixes="xs mf w">
<xsl:strip-space elements="*"/>
<xsl:output indent="yes" omit-xml-declaration="yes"/>
<xsl:function name="mf:group" as="node()*">
<xsl:param name="nodes" as="node()*"/>
<xsl:param name="level" as="xs:integer"/>
<xsl:if test="$nodes">
<ul>
<xsl:for-each-group select="$nodes"
group-adjacent="boolean(self::*[descendant::w:ilvl/#w:val = $level])">
<xsl:choose>
<xsl:when test="current-grouping-key()">
<xsl:apply-templates select="current-group()"/>
</xsl:when>
<xsl:otherwise>
<xsl:sequence select="mf:group(current-group(), $level + 1)"/>
</xsl:otherwise>
</xsl:choose>
</xsl:for-each-group>
</ul>
</xsl:if>
</xsl:function>
<xsl:template match="#* | node()">
<xsl:copy>
<xsl:apply-templates select="#*, node()"/>
</xsl:copy>
</xsl:template>
<xsl:template match="#* | node()" mode="transfer">
<xsl:copy>
<xsl:apply-templates select="#*, node()"/>
</xsl:copy>
</xsl:template>
<xsl:template match="w:p">
<xsl:apply-templates select="descendant::w:t"/>
</xsl:template>
<xsl:template match="w:p[.='']|w:sectPr"/>
<xsl:template match="w:t">
<xsl:choose>
<xsl:when test="ancestor::w:p[descendant::w:pStyle[#w:val='ListParagraph']]">
<li>
<xsl:apply-templates/>
</li>
</xsl:when>
<xsl:otherwise>
<p>
<xsl:apply-templates/>
</p>
</xsl:otherwise>
</xsl:choose>
</xsl:template>
<xsl:template match="w:body">
<xsl:variable name="firstPass">
<xsl:for-each-group select="*" group-adjacent="boolean(self::w:p[descendant::w:ilvl])">
<xsl:choose>
<xsl:when test="current-grouping-key()">
<xsl:sequence select="mf:group(current-group(), 0)"/>
</xsl:when>
<xsl:otherwise>
<xsl:apply-templates select="current-group()"/>
</xsl:otherwise>
</xsl:choose>
</xsl:for-each-group>
</xsl:variable>
<xsl:apply-templates select="$firstPass/node()"/>
</xsl:template>
<xsl:template match="ul[preceding-sibling::*[1][name()='li']]"/>
</xsl:stylesheet>
See it in action here.
I am using a build.xml(ant) and code looks as follows,
<junit fork="yes" dir="." >
----------
---------
<for list="1,2,3,4,5,6" param="Val">
<env key="environment" value="${Val}" />
<batchtest fork="yes" todir="${junitreport.todir}">
<fileset dir="src/java">
<include name="TestOne.java" />
<include name="TestTwo.java" />
</fileset>
</batchtest>
</for>
</junit>
while running this i get the following error,
junit doesn't support the nested "for" element.
Is there any other way to achieve this loop in junit?
Please help.
Swap the <for> and the <junit> elements so <for> is on the outside and <junit> is on the inside:
<for list="1,2,3,4,5,6" param="Val" delimiter=",">
<sequential>
<junit ...>
<!-- Use an at-sign to reference the "param" from "for". -->
<env key="environment" value="#{Val}" />
</junit>
</sequential>
</for>
Note, that Val is referenced as #{Val} with an at-sign (#), not a dollar sign ($).
I am currently being confused by the Vector class.
I wrote a beautiful XML to TypedClass parser. Works beautifully and without fault. UNTIL a co-worker noticed we got a Conversion Error for Vector.<Number> to Vector.<*>.
Every Vector I've ever tested all extend Vector.<*>.
Vector.<Sprite>, Vector.<String>, Vector.<Point>, Vector.<Boolean>, Vector.<TextField>, Vector.<CustomObject>, etc etc etc. ALL of them.
<type name="__AS3__.vec::Vector.<String>" base="__AS3__.vec::Vector.<*>" isDynamic="true" isFinal="false" isStatic="false">
<extendsClass type="__AS3__.vec::Vector.<*>"/>
<extendsClass type="Object"/>
<accessor name="length" access="readwrite" type="uint" declaredBy="__AS3__.vec::Vector.<*>"/>
<accessor name="fixed" access="readwrite" type="Boolean" declaredBy="__AS3__.vec::Vector.<*>"/>
</type>
But then when I use describeType on Vector.<Number>, Vector.<uint> and Vector.<int>.
<type name="__AS3__.vec::Vector.<Number>" base="Object" isDynamic="true" isFinal="true" isStatic="false">
<extendsClass type="Object"/>
<constructor>
<parameter index="1" type="uint" optional="true"/>
<parameter index="2" type="Boolean" optional="true"/>
</constructor>
<accessor name="length" access="readwrite" type="uint" declaredBy="__AS3__.vec::Vector.<Number>"/>
<accessor name="fixed" access="readwrite" type="Boolean" declaredBy="__AS3__.vec::Vector.<Number>"/>
</type>
Now I have accounted for these 3 vectors individually as even uint and int does not extend Vector.<Number> as I would have expected.
And my parsing function works for all types correctly again. But my confusion comes as to WHY this is the case, and why I couldn't find any documentation on the subject.
I asked the same question on the Kirupa forums a few months back, but I cannot for the life of me find the thread.
If I remember this correctly, the Vector.<Number>, Vector.<int>, and Vector.<uint> (but not Boolean or String, oddly enough) classes are made to be as fast as possible, so they are written and treated as separate classes by the Flash Player.
As you have noticed, all other Vector classes extend Vector.<*> and type checking is done a bit differently (which is why Vectors are faster with int, uint, and Number, but Arrays are slightly faster for all other classes)
Anyway, that was the WHY. As for how to get around this issue, I'm afraid you are going to have to pass your vector as untyped to the function you want to use it in:
public function addItem(vector:*, item:*)
{ vector.push(item); }
I have the following WordML snippet which works well for numbered lists :
<w:wordDocument xmlns:w="http://schemas.microsoft.com/office/word/2003/wordml">
<w:lists>
<w:listDef w:listDefId="1">
<w:lvl w:ilvl="0">
<w:start w:val="1" />
<w:lvlText w:val="%1." />
<w:pPr>
<w:ind w:left="720" w:hanging="360" />
</w:pPr>
</w:lvl>
<w:lvl w:ilvl="1">
<w:start w:val="1" />
<w:lvlText w:val="%2." />
<w:pPr>
<w:ind w:left="1080" w:hanging="360" />
</w:pPr>
</w:lvl>
</w:listDef>
<w:list w:ilfo="2">
<w:ilst w:val="1" />
</w:list>
</w:lists>
<w:body>
<wx:sect>
<w:p>
<w:pPr>
<w:listPr>
<w:ilvl w:val="0" />
<w:ilfo w:val="2" />
</w:listPr>
</w:pPr>
<w:r>
<w:t xml:space="preserve">Item 1</w:t>
</w:r>
</w:p>
<w:p>
<w:pPr>
<w:listPr>
<w:ilvl w:val="1" />
<w:ilfo w:val="2" />
</w:listPr>
</w:pPr>
<w:r>
<w:t xml:space="preserve">Item 1.1</w:t>
</w:r>
</w:p>
<w:p>
<w:pPr>
<w:listPr>
<w:ilvl w:val="1" />
<w:ilfo w:val="2" />
</w:listPr>
</w:pPr>
<w:r>
<w:t xml:space="preserve">Item 1.2</w:t>
</w:r>
</w:p>
<w:p>
<w:pPr>
<w:listPr>
<w:ilvl w:val="0" />
<w:ilfo w:val="2" />
</w:listPr>
</w:pPr>
<w:r>
<w:t xml:space="preserve">Item 2</w:t>
</w:r>
</w:p>
<w:p>
<w:pPr>
<w:listPr>
<w:ilvl w:val="1" />
<w:ilfo w:val="2" />
</w:listPr>
</w:pPr>
<w:r>
<w:t xml:space="preserve">Item 2.2</w:t>
</w:r>
</w:p>
</wx:sect>
</w:body>
</w:wordDocument>
However, I can't figure out how to create a bulleted list. I have seen lvlPicBulletId but I don't understand how to use it. Anybody knows how to do it?
Thanks.
Turns out that bullets are simply characters in specific fonts. For example, here is the lvl element for a filled circle :
<w:lvl w:ilvl="0">
<w:lvlText w:val="ยท" />
<w:rPr>
<w:rFonts w:ascii="Symbol" w:h-ansi="Symbol" w:hint="default" />
</w:rPr>
<w:pPr>
<w:ind w:left="720" w:hanging="360" />
</w:pPr>
</w:lvl>
A bulleted list in WordML is defined by the level NFC value of 23.
<w:listDef>
<w:lvl>
<w:nfc w:val="23"/>
</w:lvl>
<w:listDef>
You can then define the symbol used for the bullet by setting the w:lvlText value.
<w:listDef>
<w:lvl>
<w:lvlText w:val="o"/>
</w:lvl>
</w:listDef>
The following URL will take you to the NFC elements reference page on MSDN but it does not provide very much detail.
http://msdn.microsoft.com/en-us/library/office/ee364387(v=office.11).aspx
Hope that helps! :-)