I need to change a plugin that build a calendar with events. The problem is that these events (that can have one or two lines) are built in rows, not columns. What causes that the events with TWO LINES fill in the spaces below the next horizontal events with ONE LINE. Generating blank spaces.
Here is an illustration of what I'm talking about:
What I need to know is if there is a way to "unlink", or "break" the cell connection with the "TR" of the table, so that the cell adjust its height according to its content, not the full height from the "TR".
Sorry if it sounds confusing.
JS Fiddle: https://jsfiddle.net/sua780k5/
link
EDIT: I'm using a plugin called FullCalendar (http://fullcalendar.io/)
Related
I work with ssrs with a dynamic row data in matrix/tablix. There is possibility when I have more than one page (say it two pages) where the data just fill half of the second page and leave a blank space below (half page blank space on the second page). How is the way to fill this blank space with empty rows? (whether rendering empty rows in the tablix, or inserting background image, or anything. I don't have any solution yet as it is dynamic data with many possibilities of the blank space size on the page)
Unfortunately there aren't any settings in the reporter that support this behavior. There are however several workarounds you could use to get the wanted result.
[1]
You could determine the amount of rows that fit on the first page and on the second page, just in case you have items above the
table on the first page. Before you send the datasource to the
reporter count the total rows and check if it exceeds the first page.
Then calculate the number of rows missing to fill an entire second
page (or third/fourth... if you ever get more data). Finally you add
empty rows/objects at the end of your datasource, which will of cource
cause the pages to be filled to the end.
As was pointed out before, this solution is only possible when working
with fixed row heights. If certain columns can have multi-line cells
then these could be checked as well and taken in account when
calculating the number of rows being displayed on the page. This makes
it slightly more complicated but is still a valid solution if you can
predict which columns might be troublesome.
[2]
A second solution would be to hide the table borders and place the table inside a rectangle that spans the maximum size of the
page. The borders of this rectangle can be used to display the table
outer borders and columns can be displayed by adding lines inside the
rectangle. This will cause the columns to fill the last page of the
report automatically. Unfortunately this isn't a solution to display
horizontal grid lines.
[3]
A third approach is adding an extra table directly below your table
with the same size of columns. Using the same method as from the first
solution you could fill the second table to represent the empty rows.
You'll probably have the same issue as with the first solution when
dealing with multi-line rows though.
I believe solution [1] and [3] will offer the most exact solution, if you're willing to do the math. If you don't want any horizontal lines then I suggest using approach [2].
Using an image to overlay the borders is of course another option but then you'll have the same issues when dealing with the multi-line rows. If you plan on working with fixed row heights, where you leave space for multi-line cells then this is becomes a valid approach but so does solutions [1] and [3].
Update:
If you only need the filled pages for printing you could make sure you add enough empty rows to fill at least the entire last page, these may go to a new page (1 new page, not 2... you can use a simple calculated guess for this) and exclude the last page when printing.
The Problem in Hand:
I want to make a form designer where user can drag and drop fields of different type and design the layout too, some what similar to wufoo form builder but here the layout is limited to single column whereas I want to make something where user can make the layout as they want.
I understand how to do in single column view, but could not understand how to achieve multiple column layout eg: row 1 there could be 3 elements, row 2 one element stretched to full length, row 3 there could be just 2 elements etc.
What I tried:
I have tried with jquery UI sortable to make a single column layout with using div where new elements can be dragged and repositioned.
Any suggestion on how to proceed further will be helpful
I have tried searching StackOverFlow and google but could not find any link on a similar topic. If anyone could point me to the same, it will be also helpful.
When you reorder elements on wufoo form builder, you can only drag'n'drop up or down. Remove that restriction and as soon as one element is dragged across a certain threshold, it "belongs" to the next column. If the "old" column was the first or last one and the line that the element was moved over was to the "outside" of the form, add a new column there, until the maximal number of columns is reached.
If the used drags the last element of a column into another column, remove the now empty column on element-drop.
You could also remove the dynamic adding/removing of columns and juist have a button ("remove column" & "add column") to do it by code.
An example for the dropping in another column can be found here: http://jqueryui.com/sortable/#connect-lists
Hope this helped!
Edit:
http://jqueryui.com/sortable/#portlets and http://jqueryui.com/sortable/#empty-lists also have elements that you could look into. Good luck! Sounds like a nice project. Can we see any progress or beta?
I've got a bit of a challenge with an HTML table that we need to have raised columns. If you look at the attached image you'll see what I mean.
The purpose of these raised columns is to draw the user's attention to them.
The problem is:
To get the effect of the column raising above the other columns you
need some kind of element/height/margin to appear outside the
boundary of the table, which doesn't seem to work
Same goes for the bottom
To have the drop shadow appear correctly, it needs to be applied to all the cells in a column.
We did get this to work by splitting it up into multiple tables then applying the styles to the table that should be the raised column. The image I've attached is actually a live table working like this.
But, you loose all other needed features of tables...
Row heights don't match if the text wraps in table 1 but not in
table 2.
To deal with the row height issue we applied a fixed height to each table's rows, but then you have to force text to not wrap. If you then get text that's longer than the width you run into trouble.
Does anyone know how this can be achieved without splitting the tables?
Thanks,
jacques
Try having an extra row for the table above the header row (you may have to stop using any th tags) to give you the overbar at the top. Similarly for the bottom, an extra highlighting row.
Although you have to compromise the table a little to do that, it is better in my book than separating into 2 tables, as that defeats all the purposes of the table tag; to show a table, and have that table easily declared.
The effects inside the table are probably best done with jquery, unless the choice of highlighted columns is entirely static, in which case consider rendering a static html version by generating the html appropriately.
I'm currently developing out a blog page with a 3 X 3 grid layout for content to fall into the different boxes (see attached example).
http://imageshack.us/photo/my-images/337/cssex.jpg/
The content blocks in the lighter gray are meant to be stationary, so any updated, recently added, etc. content will not affect these boxes, only the black ones. I'm trying to figure out the best approach with keeping the gray boxes stationary, but allowing the black boxes to be populated dynamically (WordPress blog entries) and floating naturally through the layout.
As of now, I'm thinking that each individual black box will query the recent post that aligns to it. So, the first black box would query the most recent post, the second black box would query the second recent post and so on.
A big order!
Here is the general idea to help get you going:
You need to make those blocks a <div> or <section> with an ID tag like this:
<section id=brief1>
(BTW, you can also use a "table" & merge cells to get that layout, just ensure you use an ID)
Then you need find a script to update the innerHTML using straight JavaScript, or a JS library like jQuery, MooTools, etc. This will allow you to inject text &/or an image inside those boxes. Example search: http://duckduckgo.com/?q=javascript+update+innerHTML+div
Once you have 1 spot updated with text, it is time to edit that script. Make an array of our ID tags, then loop though all of them to insert new content one at a time.
Good luck! If I see something pre-rolled on my travels, I'll update this thread.
I'm new on this particular project, and I've been tasked with resolving an issue that's appearing in IE8.
If you check http://funds.ft.com/ETFHomepage.aspx, There's a section called "News". In that section, there's a column called "Most Popular ETFs". This should be the same width as the "Recently Viewed ETFs" column.
For reference, this page is appearing correctly in Firefox. Can somebody please point out what I can do with CSS or (some other means)* to resolve this?
*I know the best way to resolve this issue is to scrap the terrible design and implement it correctly!! :-) -- we're actually doing that right now. It's a big job, so it's taking a long time. In the mean time however, we have to fix the bugs as they appear. Thanks
Update: just to note what I've said to Hristo, "I think the problem is with the table (rather, nested tables) on the left. The table in the center has its width defined by the image, and the table on the right doesn't have an image so it gets crushed"
Well the reason this is happening is because of the url you have under the "Alphaville: Overcoming the Volcker rule, with ETFs" header. Since the url has no whitespace in it, the table tries to give it space. So there are a couple of ways to fix this problem:
Plain text urls aren't very becoming on a webpage (especially when they're not in anchor tags so you can click on them.) Could you update the content so that you don't have a raw url in your content?
If you must be able to handle long lines of text with no whitespace then you need to figure out how to change the layout of the page so it forces the text to either wrap or clip to fit the container. Try playing around with putting "table-layout: fixed" on your tables to force the column widths to be sized based on the table's specifications only (instead of content). Firefox seems to be wrapping on dashes and slashes in the url whereas IE only wants to wrap on the dashes in the url.
I would say your layout is fine, and you just need to fix the content generation so it doesn't include any long plain text urls (option 1 above)
EDIT: If you do decide to go with option 2 above, then look into the css rule "word-break: break-all". It is IE only and it forces the text to break as soon as it reaches the end of the container. Not good for words, but it works for url's. So you couldn't apply this to the whole news table, but you could to just the cell that contains the url.