I have a database with many forms, when I added a button with an onClick event to one of them it just doesn't work. The onClick event code is very simple:
Private Sub button_Click()
DoCmd.Close
End Sub
Doesn't matter how I click it, the event is not firing. I put a break point in front of the sub, and realized that when I clicked the button the event is not even firing. I create buttons in other forms they work fine, its just this one specific form that doesn't work.
I did some testing, and realized that when I make the form into a split form, the button stops working.
Any Idea why?
Thanks
Nvm..it seems like there has to be at least one field in the split form for the button to work. Did not know that before
Then maybe the function is not linked to the button.
did you checked that in the button properties "on click" has the vba function linked?
the buttom name and the function im vba are the same? "Button"?
The Command Button Wizard create a command button that performs a specific task. In an Access (.accdb) file, the wizard creates a macro that is embedded in the OnClick property of the command button. In an .mdb or .adp file, the wizard creates VBA code, because embedded macros are not available in those file formats.
This might not be quite relevant to your question but might help someone else in the future where an event is not firing....I had a similar issue in an Excel form where an event was supposed to happen when I click a button...I deleted the button and added it again and it worked...could be a bug or a file corruption...try deleting then adding the control again.
Related
In one of my forms in my Access Database I have a button with a Macro Event that opens another form where two fields match. However, whenever I open my Database this button with the Macro Event doesn't work until I've opened the VBA Editor. After I've opened the VBA Editor and refreshed the form it works just fine.
Also, the Conditional Formatting that I've attached to one of my text boxes on this form (same form as button with Macro Event) doesn't work unless the VBA Editor is open either..
Any thoughts?
Just to clarify, after the VBA editor is closed the code works as well, it seems as if it just needs that initial opening. I have other VBA and Macro events that work without the VBA editor needing to be opened, like I said it’s just that conditional formatting and that specific macro event on my button. When I’m back at work on Monday I’ll provide more details when it comes to the code and etc.
Solved: So the code must have disabled, although there was no yellow bar indicating this was the case. I made a copy of my database to troubleshoot and when I opened the my new copy it asked me to enable code and now everything works fine.
Strange. I suggest you create an AUTOEXEC macro and run a function with something simple like just showing a message box in VBA. With that you can verify if your code is the problem or something else.
I have a form with several subforms whose content is edited in separate forms, opened by command buttons.
When the data in those forms is updated, and the extra forms closed, naturally the main form needs to be refreshed before those changes can be seen. Clicking the Refresh All quick access toolbar button achieves this perfectly.
So I made a macro for the "got focus" event on the main form to refresh it, but it does nothing. I tried repaint and requery as well, applying the latter specifically to the subforms in question, and ran them out of vba instead of an access interface built macro too, none of these seem to solve the problem.
vba coding:
Private Sub Form_GotFocus()
Screen.ActiveForm.Requery
Screen.ActiveForm.Repaint
Screen.ActiveForm.Refresh
Me.sfmContact.Requery
Me.frmCustCert.Requery
Me.frmCustReq.Requery
End Sub
Annoying thing is that if I put this (or even just the macro or Screen.ActiveForm.Refresh) in the on click event of one of the controls it works fine. Just can't seem to make it work in any automatic events that don't require thought or clicks from the end user.
This question is sort of a dupe of Refresh button on an Access form but that question is over a year old, and has no accepted answer. So I've expanded on it.
What you mentioned in your comment there is correct:
My guess is that it's not running it, but I don't know why. I got mixed up between OnActivate and OnLoad, which is why I didn't try that option. That works and solves the problem, but why wouldn't GotFocus fire? Surely the main form lost focus when another form got it for updating, and then it got it back again when the other form closed/anything in the main form was selected...
To avoid this type of error in the future, it may be prudent to specifically name the form in your code instead of using the "Me." command, as that only works for current focus. For instance:
Me.sfmContact.Requery > Forms![FormName].sfmContact.Requery
Alternatively, you could just set the focus to the form in question before that sort of coding.
Forms![FormName].SetFocus
I am going crazy with the easiest piece of code that just won't work. I can't fugure out why. I have a button on a form that opens another form but when i click it I get the following error and don't really know what to change:
my code click code is:
Private Sub HSbrowse_Click()
DoCmd.OpenForm "frmSearchPCR"
End Sub
Any Ideas?
I've had this issue several times. I believe that it is caused by the module of your form becoming corrupt. To fix it, set the "Has Module" property of your form to "No" and save and close your form. This will delete the module and any code it contains, so you will need to copy your code first. Open the VBA window to verify that the module was deleted, then reopen your form and set its "Has Module" property back to "Yes" and paste your code back in. This method has solved this problem for me on more than one occasion.
Does the current form has any ActiveX Control in it?
If not then your form may be corrupt,
rebuild your database using e.g. TM-RebuildDatabase
Start by removing individual controls one-at-a-time. When your error goes away you will know the offending control, if that is indeed the problem.
Does the form have underlying data? Did you remove that to see if the problem changes?
I'm trying to write some code for my database to enable a dropdown box in a parameter prompt for a query, but it's doing nothing instead of it's intended purpose. This:
Dropdown in Access 2007 parameter query
has been the source of my inspiration. Though I seem to be unable to implement even the most basic VBA code:
Private Sub cmdReset_Click()
Me.cboSelectName = Null
End Sub
(Yes this is not all my code! Just one of the subs)
On the relevant form, I have a button called "cmdReset", which has "[Event Procedure]" for the event "On-Click". I also have a dropdown box called "cboSelectName" on said form. Also I have tried closing the database, and making sure to enable macros when it starts.
So essentially this code should make the value in the dropdown box null when I click the reset button. However it does nothing, it simply deselects the dropdown box. Can anyone help me with this one? I'm keen to start implementing some VBA in my database!
As suggested by Remou, the code wasn't even running. I figured out my problem - I had saved the code in a new module, rather than in the VBA code for my form. Once I shifted the code into the form object, the reset button worked. I've also now got some nifty code working with the actual "generate report" command. VBA really has the power to take your database to a whole new level!
I'm designing a Form in Access 2003. My goal is that when the user double-clicks on a record (aka Detail), a second form opens. This is easy enough to do when I start from scratch.
But of course, I'm not starting from scratch. I've been working on this for a few hours now, have added some conditionally formatted textboxes, fields, etc, and don't want to start over if I can avoid it.
I don't know if I turned on/off some obscure property, but I've been working on this form for a few hours now and the Double-Click event of the Details section only triggers when I double-click on the first record or any other with conditional formatting.
To troubleshoot this, I've gone so far as to comment out all the other VBA script except this:
Private Sub Form_Load()
Me.Application.DoCmd.Maximize
End Sub
Sub GotoFrmDetails()
MsgBox "You Double Clicked Me!"
End Sub
Even with the VBA script reduced to just these lines, the DoubleClick event only triggers on the first record and no other. Can anyone tell me what wrong? I'd rather not have to rebuild this from scratch.
I find the click events of form sections to be more trouble than they are worth (click event doesn't pass through to the form if user clicks on a control or label, etc). What I use instead are transparent command buttons.
Just add a command button to your form and set its Transparent property equal to True. Then you can use the Z-order to make fine-grain changes if necessary (send to front/back, send forward/back).
They can be hard to find once you make them transparent, so be sure to give them descriptive names.
If you want the user to be able to double click anywhere in the detail section, just make the transparent command button's height/width match the section height/width.
Move your code from the Detail section DoubleClick event to the transparent command button's DoubleClick event and you should be good to go.
I'm wondering if the rows are getting their Locked property set to Yes, or their Enabled property set to No during your condition formatting.