In PhpStorm, when i want to create a new file, there used to be three options for php at the top of the list. new PHP file, new PHP Class, and something else.
Now there is no option for php. there is just 'file', 'directory', 'new scratch file' and then html/css/etc file types.
Problem solved. for anyone having this question in the future, you should know that PhpStorm has the above behavior when indexing the project, which usually happens every time you open a project.
but in my case, something(I don't know what), had caused to add "." to the list of paths to be indexed, making PhpStorm index the whole home folder, and naturally, it took a lot of time.
Any web project consists of lots of partials that are included into the main file. Very often IDE (PhpStorm for my case) doesn’t know where the including partial resides. The thing is sometimes we use absolute path (e.g. in AngularJS to specify where views’ or directive’s templates reside) and relative path in preprocessors’ sources (jade, stylus, coffee, etc.). And all these files can be stored somewhere in the folder structure.
Therefore very often you can’t to open the including file right from the main file using Ctrl+B.
I think there is a way to tell IDE where this file actually resides. Does anybody know how to cope with it?
If there is no way, I suppose we should ask the developer to solve it somehow.
Depending on the particular framework in which you're developing, a PhpStorm plugin might exist to make CTRL+B navigation possible. For instance, using the Symfony plugin (installed via Settings > Plugins), CTRL+B navigation into a partial template becomes possible in code like this:
return $this->render('hello/world/index.html.twig');
If a plugin is not available, try the following steps. It's not a perfect solution, but it's better than nothing! It's also extremely quick once you get the hang of it.
With your cursor inside the string containing the path and filename, use the 'Extend Selection' keyboard shortcut until the entire string is highlighted (excluding any wrapping single/double quotes). If you don't currently have the 'Extend Selection' action mapped, you can do so via Settings > Keymap.
Immediately use the 'Navigate to File' shortcut (CTRL+SHIFT+N) to search for all files matching the path/filename contained in the string you previously highlighted.
A dropdown box will appear containing all matching files. Find the proper one and open it using ENTER.
I have one .chm file in which Contents and Search tab are there. But Favourites and Index tabs are missing. IF I Want to add them in .chm file how can I do that?
I assume you don‘t have the original project with the project file (*.hhp) and the HTML files. If you have only the CHM file, there is no easy way to do this.
The missing index and favourites tab was originally not added by the help author. So you have to decompile the CHM file and compile again and you have to create the index yourself!
If you really want to start with Reverse Engineering decompling is described at:
http://www.help-info.de/en/Help_Info_HTMLHelp/hh_command.htm
For some first steps you don't actually need any tool to do this. Just open a command prompt window and type the following:
hh.exe -decompile <target_directory> <path>\<filename>.chm
The only decompiler with any additional features is KeyTools as this can try to rebuild the project (.hhp) file. You will need this file if you want to recompile the help project (see link above).
One thing to note is that the decompile/recompile process isn't a "round-trip" process; certain features that the help author added to the original help file can't be recovered when you decompile it, so these may no longer work properly after you've recompiled.
This is especially true in the area of context-sensitive help, which may be broken in the new version of the file.
For further information in help authoring and building CHM files see also:
https://www.youtube.com/watch?v=BxVm_Edaus8
Getting this very strange error when I am trying to load my ipython notebook. Never had it before, and I cannot to my recollection, remember having done anything silly with ipython:
Unreadable Notebook: /path/to/notebooks/results.ipynb NotJSONError('Notebook does not appear to be JSON: u\'{\\n "cells": [\\n {\\n "cell_type": "...',)
which is followed by
400 GET /api/contents/results.ipynb?type=notebook&_=1440010858974 (127.0.0.1) 36.17ms referer=http://localhost:8888/notebooks/results.ipynb
Save yourself a headache. Open your .ipynb in any online JSON validator and it will tell you which lines have issues. I used this one.
In my case, I am using GitHub to save and share my ipython files with my teammate. When there is a conflict in the code, I had to delete those lines indicating the changes in the conflicting code such as:
>>>>>>>>head
=============
and It works for me.
This happened to me as well. I opened my data.ipynb file using notepad and found out it was blank.
I managed to recover my file by going into the hidden ipynb_checkpoints folder and copying data_checkpoint.ipynb out into my working directory.
In my Mac OS terminal
cd .ipynb_checkpoints
cp data-checkpoint.ipynb \..
Thankfully the codes were preserved. Hope this helps!
I just had the same issue after upgrading from IPython 0.13 (ish) to Jupyter 4.
The problem in my case were a few rogue trailing commas in the JSON, for example the comma following "outputs" in:
...
"language": "python",
"metadata": {},
"outputs": [],
},
After removing the commas, Jupyter/IPython could again read the notebook (and upgraded it to version 4). I hope this helps.
The easiest way to recover corrupted Jupyter notebook files, whether it contains text or not (size = 0KB), is to go to the project folder and display the hidden files. Once the hidden files are displayed, you will see a folder named '.ipynb_checkpoints'. Simply open this folder and take the file you want!
Visual studio code procedure
This is my procedure that usually avoids me groping in the dark.
I installed a json parser validator like this one.
Open the file and save a copy as .json file.
Open the json and look for the errors.
Save it back to the .ipynb extension.
Usually, I manage to fix the errors quickly.
Jupyter autosaves in a specific way. It means You have accidentally closed the notebook before properly saving it.
You need to look for three things -
Search for <<<<<<< and delete those lines.
Search for ====== and replace those lines with ,.
Search for >>>>>>> and delete those lines.
It will work fine after this.
this can be changed to reformat your ipynb file to readable in jupyter notebook. check your other ipynb files(open in notepad) which are working fine with your jupyter notebook, check and compare at the end of the files in notepad. there you can reformat the file which is not working.
I had this issue from accidentally saving as .txt from github and solved by deleting .txt (leaving .ipynb instead of .ipynb.txt when downloading)
Yes, the best solution for me was I saved my notebook in HTML format, then opened it in Notepad ++ , delete the long repeated lines of output which were causing my notebook to grow to 45MB, once that cleared, Saved the file back into (.ipynb) format , and was able to opened it with no JSON error.
Hope that worked for others as well!
Got this error after conflicts while pushing my code to Github. The code present on the repo was old, and my changes were stashed. Notebook wasn't opening in either Jupyter and github repo. Following above comments, I searched for the part in my code which was giving JSON error,i.e. '<<<<<<<<<<<', '=======' and '>>>>>>>>>>' characters using an online json parser. Then I opened my .ipynb notebook in notepad++ and manually replaced these characters with blank string ''. After this, the notebook opened on my local Jupyter, and I also pushed the changes to Github.
I have changed by ipynb file encoding from UTF-8-BOM to UTF-8, and then it worked.
My native language is not English, but because this problem helped me a part, I came to feedback my solution.
The following is translated with translation software:
Fundamentally, the file format is messed up due to wrong closing. When opening, the correctness of the json format will be checked first, and an error will be returned if it is found to be wrong.
The mess in my file format is not <<<<< or ====== but the lack of commas.
Either way, it's best to use a piece of software to detect errors in the json syntax, and then manually fix it yourself.
The json website detection provided by the highest praise is available, but the detection errors are not complete, and may need to be detected-modified-detected-modified.
Also use vscode to open the file, vscode will prompt the location of the json syntax error, which is also incomplete and needs to be checked and modified multiple times.
The error location provided is more difficult to find. I use nodepad++, and the lower right corner can display how many characters are selected (standard, including line breaks). Then select from the first character until the destination position.
Although it's a bit stupid, the main reason is that I didn't find the relevant positioning method.
Clear all outputs.
Then copy the notebook.
If you use Jupyter-Notebook in VS code, just save it in VS code, close the file and try to open it again by accessing the browser.
on ubuntu 20.04, I have file String.ipynb. I had same problem because I coded ơ [ echo 'hello' >> String.ipynb ]. deleting 'hello' in String.ipynb -> I could open my notebook like normal.
how did I delete? [ nano String.ipynb ] * move to last line (hello) * -> delete it.
I hope my answer help you :D
you will see this error may be because, you were getting merge conflict in .ipynb file. because of that git adds >>>>>>>> HEAD thing in .ipynb file which makes is unreadable.
To overcome this issue open .ipynb file in vim editor and then remove the incoming changes or your changes as per your use case.
vim <your-.ipynb-file-path>
To remove incoming changes remove content between these lines<<<<<<<<<< HEAD ==============. Note:- remove this line as well >>>>>>>>>>>> this line.
to remove your changes remove content between these lines ============== >>>>>>>>>>>. Note:- remove this line as well a <<<<<<<<<< HEAD
I had the same issue after git merge while using VS Code and Jupyter extension.
VS Code would not open the notebook after the merge conflicts were highlighted in the notebook JSON by git (e.g. <<<<<). One way around it was to highlight the changes and accept one by one using the file viewer in the VSCode git interface.
Alternative that worked for me was to rename the file to .json so that it would open and then search for each instance of <<<<< and accept the incoming change.
I've a file in a folder and I don't know anything about this file (how it's generated and updated) because it comes from an application running on my system of which I don't have the source code.
The file format is clearly json and I successfully created an hard link to it (using the shell command ln file hardLinkToFile) and placed it on another directory.
At this point I check the "2" files and they are exactly the same as expected, but when I perform an action in the application that cause an update of the original file the hard link doesn't get updated.
Any idea on how I can solve this problem?
UPDATE: As pointed out by both Vlad Lazarenko and mvds the file probably get deleted and a new one is created, is there something I can do to obtain a solution equivalent to the hard-link one I thought initially about?
If a hard link is not getting updated, it means that application is removing the old file and creates a new one. Thus, you still have a hard copy of the previous file, but new file has a totally different inode, though path is still the same. You can verify it simply by changing the content of that file yourself - the link should get updated.
I am getting the same behavior in TextEdit, but not in TextMate. I would suspect this is due to the revision control built in to OS X Lions document architecture. TextEdit uses versioning, while TextMate does not. Most likely this function replaces the file instead of changing it, as described by #Vlad Lazarenko.
#Vlad and Francesco. It's really in this way. I verified that vi leaves the inode unchanged and the src and dest file are both changed, while e.g. the kate editor doesn't and I was getting mad to understand why the changes I made in the src file weren't also in the dest file.
You can easily check this with the command ls -li srcfile destfile before editing one of them with each editor I mentioned.
By the way it's not nice that the hard link are application dependent
I guess it is a bit too late...
Anyways, accidentally I found that, if you change the default app for the file, the hard link gets separated from original file. Even if you click on change all and do not relate to that specific file.