I'm trying to install a previous version of Sphinx i.e. 2.1.7, and here is what I did to accomplish the goal:
Downloaded the old version from this link, and extracted it at Desktop.
Entered in to the project directory, and cd ~/Downloads/sphinx/sphinx/api/libsphinxclient, and did ./configure --with-mysql
Did make & make install.
Included ~/Downloads/sphinx/sphinx/bin in $PATH, and wrote this functionality in .bash_profile.
Now, when I do searchd --version, it gives me the following error:
dyld: Library not loaded: /opt/local/lib/mysql55/mysql/libmysqlclient.18.dylib
Referenced from: /Users/arslanali/Downloads/sphinx/bin/searchd
Reason: image not found
Trace/BPT trap: 5
Now, I've tried every solution to get rid of this error, but unable to get it resolved.
Edit:
I'd had the latest version of MySQL, and when returned to previous, the mentioned error went away, but now I'm facing the following error each time I do: searchd --version,
dyld: Library not loaded: /opt/local/lib/libexpat.1.dylib
Referenced from: /Users/arslanali/Downloads/sphinx/bin/searchd
Reason: Incompatible library version: searchd requires version 8.0.0 or later, but libexpat.1.dylib provides version 7.0.0
Trace/BPT trap: 5
I was facing same issue, I was trying to compile the binary release, Its already compiled (which is why you have a searchd command despite not compiling).
So we need source of thinking sphinx in order to compile it successfully.
1) Downloaded source from
http://sphinxsearch.com/downloads/sphinx-2.1.7-release.tar.gz/thankyou.html
2) Un-zip downloaded file.
3) Cd into unzipped folder.
4) Run following commands.
./configure --with-mysql
make
make install
5) Done :)
Try this command:
sudo install_name_tool -change libmysqlclient.18.dylib
/usr/local/mysql/lib/libmysqlclient.16.dylib /usr/local/bin/indexer
you might have to change the paths to match yours.
Related
Recently I updated my MacOS to Monterey 12.3 which included updates for xcode.
After that I am not able to run the rails application that I have been working on. I keep getting this error when I try to spin up the server.
I have tried installing and removing mysql different ways. Both using a brew install and DMG file from mysql website.
I am able to access the database instance through my command line but I think they issue is that it I can't connect from application. Anyone else having similar issues?
here is the full error
/Users/gus/.rbenv/versions/2.6.5/lib/ruby/gems/2.6.0/gems/activesupport-6.0.3.6/lib/active_support/dependencies.rb:324:in `require': dlopen(/Users/gus/.rbenv/versions/2.6.5/lib/ruby/gems/2.6.0/gems/mysql2-0.5.3/lib/mysql2/mysql2.bundle, 0x0009): Library not loaded: libssl.1.1.dylib (LoadError)
Referenced from: /Users/gus/.rbenv/versions/2.6.5/lib/ruby/gems/2.6.0/gems/mysql2-0.5.3/lib/mysql2/mysql2.bundle
Reason: tried: 'libssl.1.1.dylib' (no such file), '/usr/local/lib/libssl.1.1.dylib' (no such file), '/usr/lib/libssl.1.1.dylib' (no such file), '/Users/gus/gus_project/Gus2021/libssl.1.1.dylib' (no such file), '/usr/local/lib/libssl.1.1.dylib' (no such file), '/usr/lib/libssl.1.1.dylib' (no such file) - /Users/gus/.rbenv/versions/2.6.5/lib/ruby/gems/2.6.0/gems/mysql2-0.5.3/lib/mysql2/mysql2.bundle
If anyone runs into this problem, this is what solved my issue.
paths to openssl needed to be updated.
gem install mysql2 -- --with-ldflags=-L/opt/homebrew/opt/openssl#1.1/lib --with-cppflags=-I/opt/homebrew/opt/openssl#1.1/include
bundle install
Obviously this is for openssl install with brew install version 1.1
I was able to get it working with this:
brew install openssl
bundle config build.mysql2 --
--with-ldflags=-L/opt/homebrew/opt/openssl#1.1/lib
--with-cppflags=-I/opt/homebrew/opt/openssl#1.1/include
brew install openssl#1.1
Do all the export path things, and make sure to link openssl#1.1
brew link openssl#1.1 --force
I had similar issue with postgresql, which raises error while running psql -d database:
Library not loaded: '/opt/homebrew/opt/openssl#1.1/lib/libssl.1.1.dylib'
In my case which I have openssl#3 and openssl# the solution is:
brew install openssl#1.1
brew link openssl#1.1 --force
Then reinstall postgresql with homebrew.
I also had my zshrc exporting the following ENV variable though I'm not quite sure if it's related:
export PATH="/opt/homebrew/opt/openssl#1.1/bin:$PATH"
export LDFLAGS="-L/opt/homebrew/opt/openssl#1.1/lib"
export CPPFLAGS="-I/opt/homebrew/opt/openssl#1.1/include"
export PKG_CONFIG_PATH="/opt/homebrew/opt/openssl#1.1/lib/pkgconfig"
For someone who runs into the same issue as mine!
I have a problem with Qt connecting with MySql, when i run this code
QSqlDatabase DBObject = QSqlDatabase::addDatabase("QMYSQL");
DBObject.setHostName("localhost");
DBObject.setDatabaseName("SingleDB");
DBObject.setUserName("root");
DBObject.setPassword("abc123");
bool ok = DBObject.open();
and I got this... QSqlDatabase: QMYSQL driver not loaded
I Have already done this also:
sudo apt-get install libmysqlclient
and
/home/wrm/Qt/5.12.3/gcc_64/bin/qmake "INCLUDEPATH+=/usr/local/include" "LIBS+=-L/usr/local/lib -lmysqlclient_r" mysql.pro
and here i have this error: Project ERROR: Library 'mysql' is not defined
Any idea?
Perhaps you need to install mysql-devel.
According to the Qt Docs QMYSQL for MySQL 4 and higher:
How to Build the QMYSQL Plugin on Unix and macOS
You need the MySQL header files, as well as the shared library libmysqlclient.so. Depending on your Linux distribution, you may need to install a package which is usually called "mysql-devel".
Google doesn't have a readily available answer, so answering this old question:
Aside from needing development files as pointed above (like apt install libmysqlclient-dev), you need to generate a config:
# Just for making my snippet work. Feel free to hardcode paths.
export QTDIR=/home/you/Qt/
export QTVERSION=5.9.5
cd $QTDIR/$QTVERSION/Src/qtbase/src/plugins/sqldrivers
$QTDIR/$QTVERSION/gcc_64/bin/qmake sqldrivers.pro
cd mysql
make
make install # if you want; it installs it in the bin dir of $QTVERSION
In the past, this was not necessary for Qt 5.5 (where I did this last time).
On a side note, there is no longer a special thread-safe version of libmysqlclient (libmysqlclient_r). It's just one one. Last time I ran into that link error, I just edited the generate Makefile to use the non-_r.
I am trying to install libde265 from source but one of its dependencies is giving me problems. I also installed this depedency from source but I converted it to an rpm package before completing installation.
When I look for the location of this library I get:
$ whereis libvideogfx
libvideogfx: /usr/local/lib/libvideogfx.la /usr/local/lib/libvideogfx.a /usr/local/lib/libvideogfx.so
The flags I have added to the ./configure command such as LIBS are not working and I don't know the root of the problem.
I installed latest Octave on Ubuntu 14.04 machine. However, when I tried to run imread command, it showed the following error message:
octave:12> imread('newfile.png')
error: imread: invalid image file: /usr/lib/x86_64-linux-gnu/octave/3.8.1/oct/x86_64-pc-linux-gnu/__magick_read__.oct: failed to load: /usr/lib/x86_64-linux-gnu/octave/3.8.1/oct/x86_64-pc-linux-gnu/__magick_read__.oct: undefined symbol: _ZN6Magick5ColorC1Ehhh
error: called from:
error: /usr/share/octave/3.8.1/m/image/private/__imread__.m at line 181, column 7
error: /usr/share/octave/3.8.1/m/image/private/imageIO.m at line 66, column 26
error: /usr/share/octave/3.8.1/m/image/imread.m at line 107, column 30
Can someone please suggest how to solve it?
Thanks!
Following these steps worked for me [Author: Christoffer Cronström (hymyly)]:
Install the dev packages needed to build octave.
sudo apt-get build-dep octave
Get the official source package. Do this in a clean directory, because it will get polluted.
cd ~/some/suitable/directory
apt-get source octave
Build it. This took roughly an hour for me.
cd octave-3.8.2
dpkg-buildpackage
Either run it from the build directory:
./run-octave
...or most preferably install it over the official octave:
cd ..
sudo dpkg --install octave_3.8.2-4_amd64.deb
From: https://bugs.launchpad.net/ubuntu/+source/octave/+bug/1372202
How did you instal Octave? The error suggests that you're missing GraphicsMagick C++ interface (package libgraphicsmagick++3) but
if you installed Octave from Ubuntu's package manager you should not have had this problem; * if you compiled it yourself, Octave should have disabled imread completely and you'd have a very different error message.
So my guess is that you build it yourself, either with:
your own build of GraphicsMagick++ which are not being loaded anymore, you may need to add their path to the dynamic linker load path (either on /etc/ld.so.conf.d./graphicsmagick or define LD_LIBRARY_PATH);
the libraries from the package manager which you have since accidentally removed (since you did not install Octave from the repositories, your package manager will not know that libgraphicsmagick++ is installed for a reason).
Either way, the solution is easy. Install Octave from Ubuntu's package manager. One of the main reasons package managers exist is to avoid this type of problems, i.e., missing dependencies.
I have installed riak on a Fedora 17 system (but not using the package manager) by following the standard instructions, i.e.:
$ wget http://downloads.basho.com.s3-website-us-east-1.amazonaws.com/riak/1.2/1.2.1/riak-1.2.1.tar.gz
$ tar zxvf riak-1.2.1.tar.gz
$ cd riak-1.2.1
$ make all
This worked and I now tried to create four nodes as described in the Fast Track tutorial:
$ make devrel
This runs for a while and then produces the error below:
==> rel (generate)
ERROR: generate failed while processing /space/surechem/riak-1.2.1/rel: {'EXIT',{{badmatch,{error,"bitcask: Application version clash. Multiple directories contains version \"1.5.2\"."}},
[{rebar_reltool,generate,2,[]},
{rebar_core,run_modules,4,[]},
{rebar_core,execute,4,[]},
{rebar_core,process_dir,4,[]},
{rebar_core,process_commands,2,[]},
{rebar,main,1,[]},
{escript,run,2,[{file,"escript.erl"},{line,741}]},
{escript,start,1,[{file,"escript.erl"},{line,277}]}]}}
make: *** [dev1] Error 1
I have difficulties understanding what that error message is trying to tell me.
Is this a version conflict with bitcask? The Fedora package erlang-bitcask is installed on the machine (erlang-bitcask-1.5.2-1.fc17.x86_64). Should it be removed? Do I need a different version of it?
Indeed this seems to be caused by conflicts with Erlang packages installed in the system. After removing the erlang-bitcask package from the system, I got similar error messages for other packages. In the end I had to remove four packages,
$ sudo yum remove erlang-bitcask erlang-ebloom erlang-js erlang-luke
to get it to work.