I am using SUSE Enterprise 11 SP3 and I want to check the version of gdm using:
localhost:~ # gdm --version
But I got an error:
** (gdm:5398): WARNING **: Failed to acquire org.gnome.DisplayManager
** (gdm:5398): WARNING **: Could not acquire name; bailing out
I am using root to execute this command.
When I try this command in CentOS6.6 or RedHat, it works well.
Does anyone knows why?
Related
I tried a couple of time to install uninstall and reinstall openshift on 2 macs with os Catalina 10.15.7 but it never starts.
I read Minishift cannot start in macOS and installed the var as described. but I still get the error below. Did anybody manage to install it on Catalyna and managed to resolve these errors?
kind regards
Markus
-- Starting Minishift VM ........ FAIL E0423 15:57:02.814314 21785 start.go:499] Error starting the VM: Error creating the VM. Error creating machine: Error in driver during machine creation: Error setting up host only network on machine start: /usr/local/bin/VBoxManage hostonlyif ipconfig vboxnet1 --ip 192.168.99.1 --netmask 255.255.255.0 failed:
VBoxManage: error: Code E_ACCESSDENIED (0x80070005) - Access denied (extended info not available)
VBoxManage: error: Context: "EnableStaticIPConfig(Bstr(pszIp).raw(), Bstr(pszNetmask).raw())" at line 242 of file VBoxManageHostonly.cpp
. Retrying.
Error starting the VM: Error creating the VM. Error creating machine: Error in driver during machine creation: Error setting up host only network on machine start: /usr/local/bin/VBoxManage hostonlyif ipconfig vboxnet1 --ip 192.168.99.1 --netmask 255.255.255.0 failed:
VBoxManage: error: Code E_ACCESSDENIED (0x80070005) - Access denied (extended info not available)
VBoxManage: error: Context: "EnableStaticIPConfig(Bstr(pszIp).raw(), Bstr(pszNetmask).raw())" at line 242 of file VBoxManageHostonly.cpp
It seens a virtualbox configuration error about network access deniying. Try this:
Access or create file /etc/vbox/networks.conf (or where your vbox configuration file is located)
Change the content to: *0.0.0.0/0 ::/0
I am getting the error message
error: operation failed: Failed to connect to remote libvirt URI qemu+ssh://mytargethostname.mydomain.com/system: Cannot recv data: Host key verification failed.: Connection reset by peer
when I try to run the kvm migration command like this
virsh migrate --verbose --live --p2p --tunnelled hosttomigrate qemu+ssh://mytargethostname.mydomain.com/system
I can successfully view the running vms on the target host when I run
virsh -c qemu+ssh://mytargethostname.mydomain.com/system list --all
Is there some special configuration that I may need for kvm ?
I need to archive my MySQL-database every year and I found the Percona Toolkit. But I want to try it on XAMPP first and not on the actual server. I used the Shell from the XAMPP Control Panel.
First, I installed pt-archiver with the command:
wget percona.com/get/pt-archiver --no-check-certificate
The installation was successful. I tried my first dry run:
pt-archiver --source h=127.0.0.1,D=db_ilb,t=erstbegegnung --file 'C:\xampp\Archive\%Y-%m-%d-%D.%t' --where "1=1" --limit 1000 --commit-each --dry-run
and it threw an error:
install_driver(mysql) failed: Attempt to reload DBD/mysql.pm aborted.
Compilation failed in require at (eval 14) line 3.
at ./pt-archiver line 2499.
After trying to install DBD::mysql via CSPAN, another error was thrown:
Warning: No success on command[C:\xampp\perl\bin\perl.exe Makefile.PL]
CPAN: YAML::XS loaded ok (v0.39)
MICHIELB/DBD-mysql-4.041.tar.gz
C:\xampp\perl\bin\perl.exe Makefile.PL -- NOT OK
Running make test
Make had some problems, won't test
Running make install
Make had some problems, won't install
Stopping: 'install' failed for 'DBD::mysql'.
Could not read metadata file. Falling back to other methods to determine prerequisites
I don't know what to do next... If you have any other suggestions for archiving, let me know :)
I am trying to compile eJabberd on CentOS6. I am following the steps mentioned # [https://www.process-one.net/docs/ejabberd/guide_en.html#htoc12][1]
However, this aborts with connection-timeout error while executing "make".
Following is the error snipet from command prompt:
*
[root#CentOS-6-64-EN ejabberd-15.04]# make
rm -rf deps/.got
rm -rf deps/.built
/usr/lib64/erlang/bin/escript rebar get-deps && :> deps/.got
==> rel (get-deps)
==> ejabberd-15.04 (get-deps)
Pulling p1_cache_tab from {git,"git://github.com/processone/cache_tab",
"cca096330ce39e8b56fe0e0c478df1ff452e7751"}
github.com[0: 192.30.252.131]: errno=Connection timed out
fatal: unable to connect a socket (Connection timed out)
Initialized empty Git repository in /root/Desktop/eJabberd/ejabberd-15.04/deps/p1_cache_tab/.git/
ERROR: git clone -n git://github.com/processone/cache_tab p1_cache_tab failed with error: 128 and output:
github.com[0: 192.30.252.131]: errno=Connection timed out
fatal: unable to connect a socket (Connection timed out)
Initialized empty Git repository in /root/Desktop/eJabberd/ejabberd-15.04/deps/p1_cache_tab/.git/
ERROR: 'get-deps' failed while processing /root/Desktop/eJabberd/ejabberd-15.04: rebar_abort
make: *** [deps/.got] Error 1
*
On trying the command "./rebar get-deps", I get the same connection timeout error.
My network connectivity is fine and it seems the github link is broken. Please Help!
You should try replacing the dependancy link to Github using https:// instead of git://
It should fix your issue.
We will check the project to make sure all our dependancies use https url scheme instead of ssh.
I got error while installing redmine on ubuntu 14.04. I don't understand why I get this error.
Below is are stack I get
apt-get install redmine redmine-mysql
Reading package lists... Done
Building dependency tree
Reading state information... Done
redmine is already the newest version.
redmine-mysql is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 4 not upgraded.
1 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Do you want to continue? [Y/n] y
Setting up redmine (2.4.2-1) ...
dbconfig-common: writing config to /etc/dbconfig-common/redmine/instances/defaul
t.conf
Creating config file /etc/redmine/default/database.yml.new with new version
granting access to database redmine_default for redmine_default#localhost: alrea
dy exists.
creating database redmine_default: already exists.
dbconfig-common: flushing administrative password
Replacing config file /etc/redmine/default/session.yml with new version
A new secret session key has been generated in /etc/redmine/default/session.yml
Populating database for redmine instance "default".
This may take a while.
rake aborted!
Server is running in --secure-auth mode, but 'redmine_default'#'localhost' has a
password in the old format; please change the password to the new format
/var/lib/gems/1.9.1/gems/mysql2-0.3.16/lib/mysql2/client.rb:70:in `connect'
/var/lib/gems/1.9.1/gems/mysql2-0.3.16/lib/mysql2/client.rb:70:in `initialize'
Tasks: TOP => db:migrate => environment
(See full trace by running task with --trace)
Error when running rake db:migrate, check database configuration.
dpkg: error processing package redmine (--configure):
subprocess installed post-installation script returned error exit status 1
Errors were encountered while processing:
redmine
E: Sub-process /usr/bin/dpkg returned an error code (1)
Errors were encountered while processing: redmine
E: Sub-process /usr/bin/dpkg returned an error code (1)`
Following is output of command dpkg -l redmine
`Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
||/ Name Version Architecture Description
+++-==============-============-============-=================================
iF redmine 2.4.2-1 all flexible project management web a`
Rails version install on my machine
rails -v
Rails 4.1.4
Ruby version install on my machine
ruby -v
ruby 2.1.2p95 (2014-05-08 revision 45877) [x86_64-linux]
apache2 version
`apache2 -v
Server version: Apache/2.4.7 (Ubuntu)
Server built: Apr 3 2014 12:20:28`
I am new to ubuntu and also linux. Can anyone identify why I get this error ?
The problem is the way the password is being passed to the MySQL server.
You can set secure_auth: true in the database.yml file right under where the password is specified to use the appropriate format.
Alternatively, you could disable secure auth in the mysql daemon config and restart.