First post here with something that is probably easy but escapes me.
On this site, which I wrote from scratch, the contact link does not jump to the div class "contact".
The site is www.whatyousaycounts.com. I am also open to any other feedback for improvements that you see are needed.
Hyperlinks can only refer to ids, you are trying to refer to a class though. Classes can be used several times, therefore, your link can't target anything.
All you have to do is add the id="contact" to your div and it will work properly.
Each of your other sections have something like:
<div class="videos" id="videos">
Whereas your Contact section is:
<div class="contact">
It needs the id to be set as well.
Related
This question already has answers here:
Anchor or Button in React SPA?
(3 answers)
Closed 9 months ago.
I see a lot of discussion on the internet about <a> tags that look like buttons, and rules that all links must obey. However, I am confused about <button> tags that are styled to look like links.
I am creating a single-page-app and my navigation component is responsible for rendering / hiding different sections of the website. Only one section would be visible at a time, so I'm treating each section as if it was a unique page with its own route.
My navigation controls are buttons, instead of links. I did this because there is nothing valid that I'm aware of, which I can put inside the hrefs (given that the hidden content is not present in the DOM).
I read on the internet that buttons must have styling to identify the priority of the button, for accessibility reasons. Ideally, I want the buttons to look like links since they behave similarly to links (although not identical).
Are there any accessibility concerns with styling buttons to look like links? Would it make more sense to style these buttons as buttons? If they should look like buttons then what should be the priority? Does it make more sense just to hide the hidden "pages" with css, so that I can turn the buttons into <a> tags and add an href?
Here is the typical markup for single page apps
<div>
<nav>
<ul>
<li>
<button data-name="Skills">Skills</button>
</li>
<li>
<button data-name="Projects">Projects</button>
</li>
<li>
<button data-name="History">History</button>
</li>
<li>
<button data-name="Employment">Employment</button>
</li>
<li>
<button data-name="Contact">Contact</button>
</li>
</ul>
</nav>
<div id="content-panel">
Home
</div>
</div>
The part at the bottom div#content-panel represents the Home page. It will be replaced with the other pages using JavaScript, which will contain the main content of the website.
For those who stumble across this, please don't use <a> without an href, it results in an element that is not longer focusable with the keyboard.
The following fiddle shows this. Try using Tab to focus the links.
You could obviously add tabindex="0" to add them back to the focus order, but this is an anti-pattern and if you ever find yourself doing this it is an indication that you have made a mistake with your HTML.
<div>
<nav>
<ul>
<li>
<a data-name="Skills">Skills</a>
</li>
<li>
<a data-name="Projects">Projects</a>
</li>
<li>
<a data-name="History">History</a>
</li>
<li>
<a data-name="Employment">Employment</a>
</li>
<li>
<a data-name="Contact">Contact</a>
</li>
</ul>
</nav>
<div id="content-panel">
Home
</div>
</div>
If you are building a SPA in a fashion similar to that described by the OP you should still be using anchors <a> for navigation.
There are a few things you should consider:
When each section is shown you should update the URL on the site via JavaScript.
If your site also has Server Side Rendering (SSR) and can function in a limited fashion without JavaScript (recommended as JavaScript does fail more often than you think due to network errors, JS errors for certain scenarios you missed etc. etc.) then the href of the anchors should point to the correct URL.
On SPA navigation it is recommended that once the new page is loaded you programatically set focus on that pages <h1>. You can do this by adding tabindex="-1" to the <h1> (which allows it to receive focus programatically without being added to the focus order of the page) and then using header1.focus()
For an even better experience for people who use a screen reader it may also be beneficial to add an aria-live section to the page with the value of assertive that announces "loading" once a link is clicked. <div aria-live="assertive"><!--add "loading" here programatically when the link is clicked, remove it once the page has loaded--></div>
I have a reasonably long answer with a bit more detail of this technique here that explains why.
To answer the original question finally!
You can style a button to look like a link. However consistency across a site is key.
So make sure that if that is the styling you use for buttons that the majority of buttons look the same.
Also if you make a button look like a standard link then really you should make your links look different to your buttons styled as links.
This avoids confusion as a button has the expectation it will change something on the current page or submit a form, a link has the expectation of changing the page / URL / navigation.
However the advice is not quite the same for a link styled like a button. It has become acceptable that links can be styled like buttons if they are a Call To Action for example. Yet again though, consistency across a site is key for a great user experience.
As stated on MDN Navigation expects to have a links as children. So if you want to prevent any accesibility issue, I suggest you to stick to them, just remove the href attribute and add a type="button" to your a tags.
Anything that looks like something else fools the user. This applies to a link looking like a button, a link looking like plain text, an h1 looking like an h2, a ul looking like an ol, etc. When the user is fooled, the user can get confused or be misled into errors. With a link that looks like a button, for example, the user may press Space to activate it and be surprised to find that it is not activated, but instead the page is scrolled.
I've been looking around online for a solution but the methods I've found don't work. The methods online tell me to do this
Make a div with a class and ID
I make one like this
<div class="paragraphBackground" id="paragraphBackground">
<p class="paragraphContent">content of paragraph</p></div>
then it says to make a link like o have below.
Goto paragraph
But when I click on the goto paragraph it doesn't do anything.
What I'm wanting to use this for is a html readme for a mod that contains a sidebar on the left that shows all the contents of the readme and when you click on one of the links it will jump you to that section in that same HTML file.
Are you looking for something like this?
http://jsfiddle.net/huntmg90/
Basically you set a <a name="identityofanchor" /> in front of your text you want linked, then to link to it you do a label of anchor
Just use the following for the link: <a href="#readme">.
For the part that you want to scroll to, use this: <div id="readme">Read me!</div>
JSFIDDLE HERE.
Your link will need to look something like this:
Paragraph 1
And the corresponding content needs to have:
<a name="paragraph1">Paragraph 1</a>
Here's a Fiddle to help: http://jsfiddle.net/m0nk3y/9mx5yx7d/
I am creating a website with navigation that causes a page-jump. But when the page-jump event is executed my page will not load properly, and most content above the called is not loaded. Here is a copy of my navigation:
<div id="navbar-type">
<ul>
<li>BEAR SOUP</li>
<li>FIAT MOTORS</li>
<li>NEWSEUM</li>
<li>TEXAS PARKS</li>
<li>ZACH THEATRE</li>
<li>GUINNESS</li>
</ul>
</div>
How can I fix the code so that the items above the page-jump are visible?
Thanks
you just need to put <a name="bear-logo"> where you want the page to scroll to when the user clicks the link and the same for the others. For example, if you wanted to scroll to the <p> tag below, you could do it like this:
BEAR SOUP
<!--More Code-->
<a name="bear-logo">
<p>Bear Soup:</p>
There doesn't seem to be any error in the displayed HTML. However, you shouldn't need to include the target for inline page anchors.
I assume you actually have the links on the page. For example, <a id="bear-logo"></a>, <a id="fiat-logo"></a>, and so on.
Moreover, the issue you describe seems to indicate that there is some invalid code elsewhere on the page (perhaps JS or jQuery). I'd recommend commenting out sections of your HTML until you isolate the interfering culprit.
BTW, have you considering using a simple jQuery script to flow the navigation to the logos instead of just abruptly jumping to them?
I'm very confused about how linking to an element within a page works. I'm learning the starter template for Twitter Bootstrap, and it contains the following code in the navbar:
<ul class="nav navbar-nav">
<li class="active">Home</li>
<li>About</li>
<li>Contact</li>
</ul>
I understand that within the list elements are anchor tags to #about and #contact, but where is the content defined for this? In the example site, the .starter-template div stays the same whenever I click the navbar buttons. What do I have to do to change the div whenever a navbar button is clicked? I tried doing this, but it just made a giant link as you would expect:
<a name="about">
<div class="container">
<div class="starter-template">
<h1>About.</h1>
<p class="lead">#about</p>
</div>
</div>
</a>
Thank you for any help!
~Carpetfizz
The links are placeholders. If you want to keep them the same, such as #about, you'd want to define an element in your page with that ID. For example, make a longer page, and include the following tag:
<h1 id="about">Here's the About Content</h1>
Clicking the link will jump to that spot in the page.
Wikipedia uses this approach to jump to sections in an article. For example, inspect the <span> tag containing the "See Also" text here:
http://en.wikipedia.org/wiki/Twitter_Bootstrap#See_also
However, since they are placeholders in the Bootstrap template, the idea is that you'll put in your own links as you see fit. For example, if you wanted to add a link to Yahoo, you'd enter your own HREF, like so:
Yahoo
Or target any other link in your site.
They're just placeholders. And if you want those targets to exist, you have to create the pages at the URLs they point to.
Such hash links can behave a little differently if you're developing a Single-page Application (SPA), but I think I've covered the simpler answer to what's confusing you. I.e., hash links attempt to jump to an ID within the page, but an element with that ID needs to exist for anything noticeable to occur.
This behavior is built into HTML; it's not something unique to using Bootstrap.
Well, in HTML 4.01 with for example <div id="example"> I could make <a href="#example"> to scroll to that div.
How can I make the same effect with <section class="asd xyz">?
They work the same. Add an ID to the section and the link should work.
<section id="example"></section>
This code jumps to the section #example.
Jump to example
EDIT:
Pure HTML does not allow you to jump to class names and for a good reason. IDs are unique while classes can be reused as often as you want. Therefore you just can't jump to a class name since it probably doesn't have a single target.