I created a package which is used to transfer data from oracle instance to SQL instance
I got following errors
1.[SRC WKF_LOG_HISTORY [63]] Error: Either Table Name or SqlCommand property should be set.
2.[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on SRC WKF_LOG_HISTORY returned error code 0x80004005. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
3.Task DFT Copy Data failed could any one please help to get out from these.
thank you
Related
I need to save a text file from my local disk to a sql database.
I'am using SSIS with Import Column
but I'am getting this error .
[test [92]] Error: Opening the file "Anexceptionerror" for reading failed. The file was not found.[test [92]] Error: SSIS Error Code
DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "test" failed because error
code 0xC02090BB occurred, and the error row disposition on
"test.Inputs[Import Column Input].Columns[attach]" specifies failure
on error. An error occurred on the specified object of the specified
component. There may be error messages posted before this with more
information about the failure [SSIS.Pipeline] Error: SSIS Error Code
DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "test"
(92) failed with error code 0xC0209029 while processing input "Import
Column Input" (93). The identified component returned an error from
the ProcessInput method. The error is specific to the component, but
the error is fatal and will cause the Data Flow task to stop running.
There may be error messages posted before this with more information
about the failure.
I have a SSIS Workflow that is a little unreliable.
The Normal procedure should be as follows: Task Scheduler Job starts batch File. Batch File starts SSIS Job.
This process produces this error:
Error: 2020-12-08 07:10:43.95
Code: 0xC02090F5
Source: Data Flow Task Connect to Impala [2132]
Description: The component "Connect to Impala" (2132) was unable to process the data. ERROR [08S01] [Cloudera][ImpalaODBC] (120) Error while retrieving data from in Impala: [08S01] : SSL_read: error code: 0
End Error
Error: 2020-12-08 07:10:43.95
Code: 0xC0047038
Source: Data Flow Task SSIS.Pipeline
Description: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Connect to Impala" (2132) returned error code 0xC02090F5. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
End Error
But when I start the Batch File, the SSIS Job is executed successfully. Even when I start the Job within MS Visual Studio there are no issues.
Google makes a hint that there could be an issue with the ODBC connection. I am using an 32 Bit ODBC Driver for Impala (User DSN). Also tried it with 64 Bit but doesn't work either.
I appreciate every answer.
Thanks
Problem solved
Please see this solution: https://community.cloudera.com/t5/Support-Questions/ERROR-SSL-read-error-code-0-with-IMPALA-from-R-programming/td-p/280561
It is about timeout parameters.
I have an SSIS package that is running fine when I press the "Start" button in VS, but when I run it via DTExec, it's bombing part way through with the following errors.
Error: 2020-06-10 13:47:20.22
Code: 0xC0047038
Source: JCMAST to SQL SSIS.Pipeline
Description: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on JCMAST - WA returned error code 0x80004005. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
End Error
Error: 2020-06-10 13:47:20.49
Code: 0xC0047022
Source: JCMAST to SQL SSIS.Pipeline
Description: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Co, Job Yesterday Sort" (47) failed with error code 0xC0047020 while processing input "Sort Input" (50). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
End Error
I can see that the package is called properly, as I can see all of the different validation and pre-execution steps. These are the only errors that come up in the entire run.
Everything that I've Googled so far with these errors typically come with some sort of additional error. Not the case here.
What's so confusing to me is why it would run manually, but not through cmd.
EDIT: Full error output
Started: 2:55:09 PM
Error: 2020-06-10 14:55:14.35
Code: 0xC0047038
Source: JCMAST to SQL SSIS.Pipeline
Description: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on JCMAST - WA returned error code 0x80004005. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
End Error
Error: 2020-06-10 14:55:14.64
Code: 0xC0047022
Source: JCMAST to SQL SSIS.Pipeline
Description: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Co, Job Yesterday Sort" (47) failed with error code 0xC0047020 while processing input "Sort Input" (50). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
End Error
Error: 2020-06-10 14:55:20.67
Code: 0xC0047038
Source: EMP Files to SQL SSIS.Pipeline
Description: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on PREMP - WA returned error code 0x80004005. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
End Error
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 2:55:09 PM
Finished: 2:55:34 PM
Elapsed: 24.343 seconds
SSIS package "D:\SafetyServicesProjects\WebAppsTest2\WebAppsTest2\Package.dtsx" starting.
Information: 0x4004300A at Data Flow Task, SSIS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at Data Flow Task, SSIS.Pipeline: Validation phase is beginning.
Warning: 0x80049304 at Data Flow Task, SSIS.Pipeline: Warning: Could not open global shared memory to communicate with performance DLL; data flow performance counters are not available. To resolve, run this package as an administrator, or on the system's console.
Information: 0x40043006 at Data Flow Task, SSIS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at Data Flow Task, SSIS.Pipeline: Pre-Execute phase is beginning.
Information: 0x4004300C at Data Flow Task, SSIS.Pipeline: Execute phase is beginning.
Error: 0xC0047038 at Data Flow Task, SSIS.Pipeline: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on ODBC Source returned error code 0x80004005. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
Information: 0x40043008 at Data Flow Task, SSIS.Pipeline: Post Execute phase is beginning.
Information: 0x4004300B at Data Flow Task, SSIS.Pipeline: "OLE DB Destination" wrote 0 rows.
Information: 0x40043009 at Data Flow Task, SSIS.Pipeline: Cleanup phase is beginning.
Task failed: Data Flow Task
Warning: 0x80019002 at Package: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "D:\SafetyServicesProjects\WebAppsTest2\WebAppsTest2\Package.dtsx" finished: Failure.
Well. Figured it out.
Turns out it all came down to versioning. I was using a version of IBM iAccess ODBC that had issues with Windows 10. Upgraded to the latest version and it worked.
I am trying to insert data into three excel sheets from a SQL table based on the condition given in SSIS Conditional Split Transformation.
When i run the package first time, it succeeds but after that i am getting the below error:
[Excel Destination [133]] Error: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
[Excel Destination [133]] Error: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "input "Excel Destination Input" (144)" failed because error code 0xC020907B occurred, and the error row disposition on "input "Excel Destination Input" (144)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Excel Destination" (133) failed with error code 0xC0209029 while processing input "Excel Destination Input" (144). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
This error is occurring to random excel destination. I am unable to find what is the cause.
Any help will be appreciated.
You need to load the 3 sheets sequentially. Attempting to load them simultaneously can cause contention issues. Reorganize your package so that the sheets are forced to load in order (sheet1, sheet2, sheet3).
Well, I don't how to explain this problem, I have two OLE DB Connections that i need to merge and send to an oledb Destination, the source oledb columns are:
tbl clientes totales:
RUT_CLIE numeric(18,0),
DV(string(1)), CLI_NOM(string(40)),
CLI_CAT_SUB(string(3)),
CLI_STA(string(5)),
CLI_SUB_STA(string(5)),
**COD_CTR (numeric(18,0)) <- JOIN KEY**,
nom_ejec(string(50)),
nom_suc(string(100)),
nom_suc_gpo(string(100)),
zonal(string(50)),
id_cargo(string(50)),
CLI_GRP_NOM(string(25)),
CANAL(string(50)),
ACTIVO(int),
VINCULADO(int),
VINCULADO_TRX(int),
CTACTE(int),
CLI_CAT(string(5))
tbl cartera 1 1:
cod_cartera (numeric(18,0)) <- JOIN KEY
cargo(string(100)),
nom_suc_gpo(string(100))
Destination:
Mapping:
I need to convert many of the columns into nvarchar(255), (I think that's the problem), but when I run the program, this happens:
Error Messages:
[OLE DB Destination [5679]] Error: SSIS Error Code DTS_E_OLEDBERROR.
An OLE DB error has occurred. Error code: 0x80040E21. An OLE DB record
is available. Source: "Microsoft SQL Server Native Client 10.0"
Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation
generated errors. Check each OLE DB status value, if available. No
work was done.".
[OLE DB Destination [5679]] Error: SSIS Error Code
DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "input "OLE DB Destination
Input" (5692)" failed because error code 0xC020907B occurred, and the
error row disposition on "input "OLE DB Destination Input" (5692)"
specifies failure on error. An error occurred on the specified object
of the specified component. There may be error messages posted before
this with more information about the failure.
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The
ProcessInput method on component "OLE DB Destination" (5679) failed
with error code 0xC0209029 while processing input "OLE DB Destination
Input" (5692). The identified component returned an error from the
ProcessInput method. The error is specific to the component, but the
error is fatal and will cause the Data Flow task to stop running.
There may be error messages posted before this with more information
about the failure.
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The
ProcessInput method on component "Sort" (4898) failed with error code
0xC0047020 while processing input "Sort Input" (4899). The identified
component returned an error from the ProcessInput method. The error is
specific to the component, but the error is fatal and will cause the
Data Flow task to stop running. There may be error messages posted
before this with more information about the failure.
Warnings:
[SSIS.Pipeline] Warning: Warning: Could not open global shared memory
to communicate with performance DLL; data flow performance counters
are not available. To resolve, run this package as an administrator,
or on the system's console.
Please help, i'm really frustrated and stressed right now, so I can't explain myself better, if you don't understand something, please ask and i'll try to make it better.
I can't be sure without seeing the actual column mappings in your OLE DB destination component, but the fact that COD_CTR is defined as NUMERIC(18,0) in tbl clientes totales and NVARCHAR(4) in RUTERO_FICHA_RED looks highly suspicious.
Edmund Schweppe gave me the idea, the problem was the Data Conversion, I must transform all the metadata into the same oledb destination, like this:
(Same Data Type as dbo.RUTERO_FICHA_RED table destination).
Thanks for the help!