I have my database built in MYSQl on Linux.
I want to be able to connect to the server remotely.
General steps for connecting to MySQL remotely:
1.- Create an account for the remote user
GRANT ALL PRIVILEGES ON db_name.* TO 'remoteuser'#'%' IDENTIFIED BY 'secret-passwd'
2.- Open port 3306, this will very depending on your linux distribution, eg: in CentOS 6.5 will be:
iptables -I INPUT -p tcp --dport 3306 -j ACCEPT
3.- Connect remotely, in this example I will use the mysqli client
mysql -h remote.mysqlserver.com -u remoteuser -p
Good luck!
Related
Using Docker Desktop, I've started a container of mysql/mysqlserver.
docker run --name=mysqlproject -e MYSQL_ROOT_HOST=% -p 3306:3306 -d mysql/mysql-server
I then went to create some users for my database.
ALTER USER 'root'#'localhost' IDENTIFIED BY 'password';
create user 'dev'#'%' identified by 'password';
grant select on optim.* to 'dev'#'%';
CREATE USER 'root'#'%' IDENTIFIED BY 'root'; GRANT ALL PRIVILEGES ON *.* TO 'root'#'%' WITH GRANT OPTION
When attempting to connect to my MySQL database from localhost, I was successful
sudo mysql -h 127.0.0.1 -P 3306 -p -u dev
I can also access the MySQL database from MySQL Workbench using the IP4 Address of my Wireless LAN adapter.
However, other users on the LAN cannot access my MYSQL database remotely
ERROR 2003 (HY000): Can't connect to MySQL server on <my Wireless LAN adapter IP> (110)
When looking at the firewall settings in place, I noticed that there was a rule in place blocking TCP traffic to 'Docker Desktop Backend'. Without the privilege to change the rule, I tried starting the container from Ubuntu instead, which is NOT integrated with Docker Desktop, at least according to Resources>WSL Integration.
docker start project
The issue persists - users cannot access my containerized MySQL database remotely.
You need to try with interactive mode from any host, but you should have the ssh key authentication to where the MySQL docker container running.
In my case, sometimes the developers want to access the DB from their local, the below commands help to connect to the DB interactively but the Mysql should listen to the socket path.
ssh -t "host-ip" \
docker run --rm -it \
--volume /db:/db:rw \
--entrypoint "/bin/bash" mysql-docker-image \
-lic /usr/bin/mysql -U username --host /mysql-db-socket-path/run/filename.socket
In my personal PC, there's a docker mysql container binding with port 3306. It works well.
I can connect the mysql server in this container over another PC.
sh$ mysql -hxxx.xxx.xxx.110 -uroot -p
In the host PC, I can connect the container by this way:
sh$ mysql -hxxx.xxx.xxx.110 -uroot -p
But when I try to connect the container to 127.0.0.1, it fails:
sh$ mysql -uroot -p
Known:
In the container, I can connect the mysql server by:
sh$ mysql -uroot -p
there's nothing wrong with the password
Meanwhile, I can connect 127.0.0.1:6376 over the host to the redis container....
I'm only speculating, but the Docker container likely has its own [pseudo] network interface. But you're trying to connect over the host's loopback interface. Those are two separate networks.
Remember, 127.0.0.1 is not just a special IP — it's an IP assigned by a separate network interface.
You can configure Docker to share the host's network stack; perhaps that would be best here.
Please try follow steps:
1.login mysql with ip and use "select host,user,password from mysql.user;" to check 127.0.0.1 exists or not in command result;
2.if not please execute grant command and ensure 127.0.0.1 has privileges,then tray login again.
grant all on *.* to root#'127.0.0.1' identified by 'root';
flush privileges;
You're going to want to check your my.cnf for the bind-address configuration:
#
# File: my.cnf
#
[mysqld]
bind-address = 192.168.1.100
In good practice and depending on your use-case, this should be 127.0.0.1.
I have a server with Rackspace. I want to access the database from my local machine command line.
I tried like:
mysql -u username -h my.application.com -ppassword
But it gives an error:
ERROR 2003 (HY000):
Can't connect to MySQL server on 'my.application.com' (10061)
What causes this error and how can I connect to the remote database?
To directly login to a remote mysql console, use the below command:
mysql -u {username} -p'{password}' \
-h {remote server ip or name} -P {port} \
-D {DB name}
For example
mysql -u root -p'root' \
-h 127.0.0.1 -P 3306 \
-D local
no space after -p as specified in the Using Options on the Command Line documentation
It will take you to the mysql console directly by switching to the mentioned database.
simply put this on terminal at ubuntu:
mysql -u username -h host -p
Now hit enter
terminal will ask you password, enter the password and you are into database server
edit my.cnf file:
vi /etc/my.cnf:
make sure that:
bind-address=YOUR-SERVER-IP
and if you have the line:
skip-networking
make sure to comment it:
#skip-networking
don't forget to restart:
/etc/init.d/mysqld restart
For Mac, use the following command:
mysql -u app -h hostaddress -P port -D dbname -p
and then enter the password when prompted.
If you want to not use ssh tunnel, in my.cnf or mysqld.cnf you must change 127.0.0.1 with your local ip address (192.168.1.100) in order to have access over the Lan. example bellow:
sudo nano /etc/mysql/mysql.conf.d/mysqld.cnf
Search for bind-address in my.cnf or mysqld.cnf
bind-address = 127.0.0.1
and change 127.0.0.1 to 192.168.1.100 ( local ip address )
bind-address = 192.168.1.100
To apply the change you made, must restart mysql server using next command.
sudo /etc/init.d/mysql restart
Modify user root for lan acces ( run the query's bellow in remote server that you want to have access )
root#192.168.1.100:~$ mysql -u root -p
..
CREATE USER 'root'#'%' IDENTIFIED BY 'password';
GRANT ALL PRIVILEGES ON *.* TO 'root'#'%' WITH GRANT OPTION;
FLUSH PRIVILEGES;
If you want to have access only from specific ip address , change 'root'#'%' to 'root'#'( ip address or hostname)'
CREATE USER 'root'#'192.168.1.100' IDENTIFIED BY 'password';
GRANT ALL PRIVILEGES ON *.* TO 'root'#'192.168.1.100' WITH GRANT OPTION;
FLUSH PRIVILEGES;
Then you can connect:
nobus#xray:~$ mysql -h 192.168.1.100 -u root -p
tested on ubuntu 18.04 server
Try this command mysql -uuser -hhostname -PPORT -ppassword.
I faced a similar situation and later when mysql port for host was entered with the command, it was solved.
try telnet 3306. If it doesn't open connection, either there is a firewall setting or the server isn't listening (or doesn't work).
run netstat -an on server to see if server is up.
It's possible that you don't allow remote connections.
For more details see:
How Do I Enable Remote Access To MySQL Database Server?
I assume you have MySQL installed on your machine. Execute the command below after filling missing details:
mysql -uUSERNAME -pPASSWORD -hHOSTNAME -P3306
mysql servers are usually configured to listen only to localhost (127.0.0.1), where they are used by web applications.
If that is your case but you have SSH access to your server, you can create an ssh tunnel and connect through that.
On your local machine, create the tunnel.
ssh -L 3307:127.0.0.1:3306 -N $user#$remote_host
(this example uses local port 3307, in case you also have mysql running on your local machine and using the standard port 3306)
Now you should be ale to connect with
mysql -u $user -p -h 127.0.0.1 -P 3307
There is simple command.
mysql -h {hostip} -P {port} -u {username} -p {database}
Example
mysql -h 192.16.16.2 -P 45012 -u rockbook -p rockbookdb
you can use the following code to connect to a remote MY SQL database
mysql -u {database_user} -p{db_password} -h {host_name} -P {port_number}
mysql -u admin -p'your_password' -h your-company.aws.com -P 3306
Must check whether incoming access to port 3306 is block or not by the firewall.
this solution worked for me:
On your remote machine (example: 295.13.12.53) has access to your target remote machine (which runs mysql server)
ssh -f -L 295.13.12.53:3306:10.18.81.36:3306 user#295.13.12.53
Explained:
ssh -f -L your_ssh_mashine_ipaddress:your_ssh_mashine_local_port:target_ipaddress:target_port user#your_ip_address -N
your_ssh_mashine_ipaddress - it is not local ip address, it is ip address
that you ssh to, in this example 295.13.12.53
your_ssh_mashine_local_port -this is custom port not 22, in this example it is 3306.
target_ipaddress - ip of the machine that you trying to dump DB.
target_port - 3306 this is real port for MySQL server.
user#your_ip_address - this is ssh credentials for the ssh mashine that you connect
Once all this done then go back to your machine and do this:
mysqldump -h 295.13.12.53 -P 3306 -u username -p db_name > dumped_db.sql
Will ask for password, put your password and you are connected.
Hope this helps.
Try this, Its working:
mysql -h {hostname} -u{username} -p{password} -N -e "{query to execute}"
This one worked for me in mysql 8, replace hostname with your hostname and port_number with your port_number, you can also change your mysql_user if he is not root
mysql --host=host_name --port=port_number -u root -p
Further Information Here
You should put your password with 'p'
mysql -u root -u 1.1.1.1 -p'MyPass'
I was too getting the same error.
But found it useful by creating new mysql user on remote mysql server ans then connect. Run following command on remote server:
CREATE USER 'openvani'#'localhost' IDENTIFIED BY 'some_pass';
GRANT ALL PRIVILEGES ON *.* TO 'openvani'#'localhost WITH GRANT
OPTION;
CREATE USER 'openvani'#'%' IDENTIFIED BY 'some_pass';
GRANT ALL PRIVILEGES ON *.* TO 'openvani'#'%' WITH GRANT OPTION;
FLUSH PRIVILEGES;
Now you can connect with remote mysql with following command.
mysql -u openvani -h 'any ip address'-p
Here is the full post:
http://openvani.com/blog/connect-remotely-mysql-server/
If you are on windows, try Visual Studio Code with MySQL plugins, an easy and integrated way to access MySQL data on a windows machine. And the database tables listed and can execute any custom queries.
If port is default, some version required data base name which you trying to connect.
mysql -u <<your username>> -h <<your host>> <<your db name >> -p
This will prompt password Then type your password. If port is not default 3306
Then:
mysql -u <<your username>> -h <<your host>> -P <<your port>> <<your db name >> -p
I want to connect to remote MySQL via ssh tunnel with user that has 'localhost' access.
I use this to make a tunnel:
ssh -f -N -L 33306:localhost:3306 user#remote-host
and this to connect to host:
mysql -h 127.0.0.1 -P 33306 -uuser -ppassword
The error i get is:
ERROR 1045 (28000): Access denied for user 'user'#'remote-host' (using password: YES)
The problem is that user 'user'#'remote-host' (or 'user'#'%') does not exist, only 'user'#'localhost' does.
Is there a way to force remote host, without server-side modifications into thinking that i come from localhost? That's the only reason I would do the connection via ssh tunnel anyway.
Note:
If I want to connect with this command:
mysql -h localhost -P 33306 -uuser -ppassword
I get this error:
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/tmp/mysql.sock' (2)
Additional data:
On remote server in /etc/hosts the values are like this:
127.0.0.1 localhost
remote-ip remote-host
The simple way to create MySQL Tunnel to REMOTE HOST:
$ ssh -fNL TEMP_PORT:localhost:MYSQL_SERVER_PORT USER#SERVER_NAME
Test:
$ mysql -u root -p -h 127.0.0.1 -P TEMP_PORT
Please note that localhost and 127.0.0.1 are treated differently in mysql on unix.
Quoting:
On Unix, MySQL programs treat the host name localhost specially, in a way that is likely different from what you expect compared to other network-based programs. For connections to localhost, MySQL programs attempt to connect to the local server by using a Unix socket file
http://dev.mysql.com/doc/refman/5.7/en/connecting.html:
Furthermore, mysql client would silently try to use a socket file even if you explicitly specify -P on your command line:
This occurs even if a --port or -P option is given to specify a port number. To ensure that the client makes a TCP/IP connection to the local server, use --host or -h to specify a host name value of 127.0.0.1
Effectively, using this command
mysql -h localhost -P 33306 -uuser -ppassword
you're simply trying to connect to your local mysqld which is missing
Considering this, your question boils down to connecting to a remote server available over a domain socket.
If installing additional software meets your requirements 'without server-side modifications' you could use socat as described here:
https://www.debian-administration.org/users/dkg/weblog/68.
Tailored for mysql, it could work as follows:
install socat on both ends
socat "UNIX-LISTEN:your_local_path/mysql.sock,reuseaddr,fork" EXEC:'ssh user#remote-host socat STDIO UNIX-CONNECT\:/your_server_path/mysql.sock"
mysql -S your_local_path/mysql.sock -u user
This question is related to the following questions:
Can't connect to MySQL server error 111
Trying to connect to remote MySQL host (error 2003)
I am configuring a new MySQL (5.1) server on my local machine. I need to provide remote access to the database. I did the following steps:
Comment bind-address in my.cnf:
# bind-address = 192.168.1.3
Grant privileges:
GRANT ALL PRIVILEGES ON *.* TO 'nickruiz'#'%' IDENTIFIED BY PASSWORD 'xxxx';
Set port forwarding on router (TCP and UDP, port 3306, 192.168.1.3)
Configure iptables for firewall
sudo iptables -I INPUT -p udp --dport 3306 -j ACCEPT
sudo iptables -I INPUT -p tcp --dport 3306 --syn -j ACCEPT
sudo iptables-save
Restart mysql server sudo /etc/init.d/mysql restart
When testing, I get the following:
LAN:
mysql -h 192.168.1.3 -u nickruiz -p
Welcome to the MySQL monitor. Commands end with ; or \g.
Your MySQL connection id is 95
Server version: 5.1.63-0ubuntu0.11.04.1 (Ubuntu)
Remote:
mysql -h 1xx.xx.4.136 -u nickruiz -p
ERROR 2003 (HY000): Can't connect to MySQL server on '1xx.xx.4.136' (111)
Clearly there's something wrong that's preventing me from being able to use my global IP address.
Notes:
I've tried testing the remote connection on the same machine and also
via SSH from a remote machine.
I'm not sure if my ISP has given me a static IP.
Any ideas?
Update:
telnet doesn't seem to be working.
telnet 192.168.1.3 3306
Trying 192.168.1.3...
Connected to 192.168.1.3.
Escape character is '^]'.
E
5.1.63-0ubuntu0.11.04.1,0g8!:#pX;]DyY0#\)SIConnection closed by foreign host.
Please check your listenning ports with :
netstat -nat |grep :3306
If it show
tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN
Thats is ok for your remote connection.
But in this case i think you have
tcp 0 192.168.1.3:3306 0.0.0.0:* LISTEN
Thats is ok for your remote connection.
You should also check your firewall (iptables if you centos/redhat)
services iptables stop
for testing or use :
iptables -A input -p tcp -i eth0 --dport 3306 -m state NEW,ESTABLISHED -j ACCEPT
iptables -A output -p tcp -i eth0 --sport 3306 -m state NEW,ESTABLISHED -j ACCEPT
And another thing to check your grant permission for remote connection :
GRANT ALL ON *.* TO remoteUser#'remoteIpadress' IDENTIFIED BY 'my_password';
errno 111 is ECONNREFUSED, I suppose something is wrong with the router's DNAT.
It is also possible that your ISP is filtering that port.
Check that your remote host (i.e. the web hosting server you're trying to connect FROM) allows OUTGOING traffic on port 3306.
I saw the (100) error in this situation. I could connect from my PC/Mac, but not from my website. The MySQL instance was accessible via the internet, but my hosting company wasn't allowing my website to connect to the database on port 3306.
Once I asked my hosting company to open my web hosting account up to outgoing traffic on port 3306, my website could connect to my remote database.
/etc/mysql$ sudo nano my.cnf
Relevant portion that works for me:
#skip-networking
# Instead of skip-networking the default is now to listen only on
# localhost which is more compatible and is not less secure.
bind-address = MY_IP
MY_IP can be found using ifconfig or curl -L whatismyip.org |grep blue.
Restart mysql to ensure the new config is loaded:
/etc/mysql$ sudo service mysql restart
I had the same problem trying to connect to a remote mysql db.
I fixed it by opening the firewall on the db server to allow traffic through:
sudo ufw allow mysql
if the system you use is CentOS/RedHat, and rpm is the way you install MySQL, there is no my.cnf in /etc/ folder, you could use:
#whereis mysql
#cd /usr/share/mysql/
cp -f /usr/share/mysql/my-medium.cnf /etc/my.cnf
I have got a same question like you, I use wireshark to capture my sent TCP packets, I found when I use mysql bin to connect the remote host, it connects remote's 3307 port, that's my falut in /etc/mysql/my.cnf, 3307 is another project mysql port, but I change that config in my.cnf [client] part, when I use -P option to specify 3306 port, it's OK.
i set my bind-address correctly as above but forgot to restart the mysql server (or reboot) :) face palm - so that's the source of this error for me!
Sometimes when you have special characters in password you need to wrap it in '' characters, so to connect to db you could use:
mysql -uUSER -p'pa$$w0rd'
I had the same error and this solution solved it.
I had this same error and I didn't understand but I realized that my modem was using the same port as mysql. Well, I stop apache2.service by sudo systemctl stop apache2.service and restarted the xammp, sudo /opt/lampp/lampp start
Just maybe, if you were not using a password for mysql yet you had, 1045 (28000): Access denied for user 'root'#'localhost' (using password: YES), then you have to pass an empty string as the password
Not sure as cant see it in steps you mentioned.
Please try FLUSH PRIVILEGES [Reloads the privileges from the grant tables in the mysql database]:
flush privileges;
You need to execute it after GRANT
Hope this help!