I have a table that is generated by PHP. I wanted to style the table a bit, so there is a border-bottom on every row.
I used border-collapse: collapse; so I don't have to apply the border to the td. I have reproduced my problem here:
http://codepen.io/anon/pen/zvpKBE
I would like to have every horizontal border as long as the row is. When I inspect my row, it's long enough, but the border is only applied to the td's in it.
Your (td)header columns and data columns should be equal to have the border fully. Like below
<table>
<tbody><tr>
<td>This is an test</td>
<td>Second field</td>
<td>Third field</td>
</tr>
<tr>
<td> </td>
<td> </td>
<td> </td>
</tr>
<tr>
<td> </td>
<td> </td>
<td> </td>
</tr>
</tbody>
Related
I have a problem using Bootstrap tables in Angular:
My <td> tags does not fit the corresponding <th> from my tableheader: I am not sure, if it is caused due my calls to the template presenting the <td>:
Here is my code:
<table class="table">
<thead>
<tr>
<th>Name</th>
<th>Description</th>
<th>Students</th>
<th>Links</th>
</tr>
</thead>
<tbody>
<tr *ngFor="let c of tests">
<app-preview-container id={{c.id}} name={{c.name}} description={{c.description}} studentCount={{Count[c.id]}}"></app-preview-container>
</tr>
</tbody>
</table>
And thats the component which gets called (<app-preview-container>):
<td>
{{name}}
</td>
<td>
{{description}}
</td>
<td>
{{count}}
</td>
<td>
some buttons
</td>
Does anyone has a tip how I can fix that? I have tried a lot using Bootstrap width-params like w-xx or col-md-x or col-x or using scope="col"/"row". But none of these fixed it.
Tables often look that way when you change <tr> / <td> display property. HTML tables have their own unique display properties display: table-row; and display: table-cell;.
You either have done that or wrapped your <td>s with additional div.
You can inspect your table in the console, and check if <td>s are direct children of <tr> and then set by hand <tr> and <td> display property to table-row and table-cell.
An example of a broken table:
td {
border: 1px solid gray;
}
*[style] {
outline: 2px dashed red;
}
<table>
<tr>
<td>
Column 1
</td>
<td>
Column 2
</td>
<td>
Column 3
</td>
</tr>
<tr>
<tr style="display: block;">
<td>
Broken
</td>
<td>
Row
</td>
<td>
!
</td>
</tr>
<tr>
<td style="display: inline-block;">
Broken td
</td>
<td>
!
</td>
<td>
!
</td>
</tr>
<tr>
<td>
Correct
</td>
<td>
row
</td>
<td>
!
</td>
</tr>
</table>
I want to know how do you skip a tag in HTML5.0. I mean literally, without CSS. Instead of an empty box, I want it to be filled in, not just blank. Any help would be appreciated
You can use colspan or rowspan.
<table>
<tr>
<td colspan="2">
Header
</td>
</tr>
<tr>
<td>
Text
</td>
<td>
Text
</td>
</tr>
<tr>
<td>
Text
</td>
<td>
Text
</td>
</tr>
</table>
I have the following code :
<table>
<tr>
<td>
<!-- Black Box -->
</td>
<td>
<!-- Search Box -->
</td>
</tr>
<tr>
<td rowspan='2'>
<table>
<tr><td class='thead'>Statut</td></tr>
<tr><td><!-- THE TD TO RESIZE --></td></tr>
</table>
</td>
<td>
<table>
<tr><td class='thead'>Annonce</td></tr>
<tr><td><!-- Don't Care --></td></tr>
</table>
</td>
</tr>
<tr>
<td>
<table>
<tr><td class='thead'>Message</td></tr>
<tr><td><!-- Don't Care --></td></tr>
</table>
</td>
</tr>
</table>
It renders like this: http://imageshack.us/a/img689/3140/tbi4.png
But I would like the orange cell under "Statut" to fill the whole height of the containing TD. I tried to apply a height property to the table, the TR and the TD, but nothing happens, be it in HTML with height=... or in CSS with style='height: ...
Here's the render I'd like to have: http://imageshack.us/a/img560/3809/dy4w.png
One could argue that tables are not the best choice here, as they should only be used for tabular data, not for layout.
However, if you decide to go with tables, you should not nest them, but work with rowspan to achieve the deisred result. The HTML would look like this:
<table>
<tr>
<td>
<!-- Black Box -->noir</td>
<td>
<!-- Search Box -->cherche</td>
</tr>
<tr>
<td class='titre'>Statut</td>
<td class='titre'>Annonce</td>
</tr>
<tr>
<td rowspan='3'>lorem ipsum statut</td>
<td>lorem ipsum annonce</td>
</tr>
<tr>
<td class='titre'>Message</td>
</tr>
<tr>
<td>lorem ipsum message</td>
</tr>
</table>
This way you do not need to bother with heights in css (which can be a pain).
I set up a small example to demonstrate: http://jsfiddle.net/qJQdj/
Try height:100%; to make it takes the total height.
Employing min-height will do the trick for you here if you are content aware of the table.
CSS
td[rowspan="2"] > table{
min-height:80px;
}
http://jsfiddle.net/LWxK4/
changed code : convert your code to:
<table>
<tr >
<td class='thead' rowspan='2'>Statut</td>
<td class='thead'>Message</td>
</tr>
<tr><td class='thead'>Message</td></tr>
</table>
it will give you what u want for sure
EDIT: this is the concept of using rowspan.now you should use it to build your own webpage.there are few more cells as well in your code.you can do that using nested tables.my answer shows how to use rowspan properly
If you really wanted nested tables...
You can force a nested table/table-cell to have a minimum height as follows:
Add a class .statut-panel to your inner table:
<table class="wrap">
<tr>
<td>Black Box</td>
<td>Search Box</td>
</tr>
<tr>
<td rowspan='2'>
<table class="statut-panel">
<tr>
<td class='thead'>Statut</td>
</tr>
<tr class="full-size">
<td>THE TD TO RESIZE...</td>
</tr>
</table>
</td>
<td>
<table class="annonce-panel">
<tr>
<td class='thead'>Annonce</td>
</tr>
<tr>
<td>Don't Care</td>
</tr>
</table>
</td>
</tr>
<tr>
<td>
<table>
<tr>
<td class='thead'>Message</td>
</tr>
<tr>
<td>Don't Care</td>
</tr>
</table>
</td>
</tr>
</table>
and apply the following CSS:
table td {
background-color: lightgray;
vertical-align: top;
}
table.statut-panel {
border: 1px solid blue;
height: 200px;
}
table.statut-panel .full-size td {
border: 1px dotted blue;
height: 100%;
}
Give the inner table .status-panel a fixed height, say 200px. CSS will treat this as a minimum height so you won't get into any overflow issues as the table content expands.
For the table cell that you want to expand, table.statut-panel .full-size td, simply set the height to 100%, and it will expand in height to at least 200px (or whatever is a good minimum height).
See demo at: http://jsfiddle.net/audetwebdesign/7L3Bc/
I don't know how to merge rows and columns inside HTML tables.
Can you please help me with making such a table in HTML?
If you're confused how table layouts work, they basically start at x=0, y=0 and work their way across. Let's explain with graphics, because they're so much fun!
When you start a table, you make a grid. Your first row and cell will be in the top left corner. Think of it like an array pointer, moving to the right with each incremented value of x, and moving down with each incremented value of y.
For your first row, you're only defining two cells. One spans 2 rows down and one spans 4 columns across. So when you reach the end of your first row, it looks something like this:
<table>
<tr>
<td rowspan="2"></td>
<td colspan="4"></td>
</tr>
</table>
Now that the row has ended, the "array pointer" jumps down to the next row. Since x position 0 is already taken up by a previous cell, x jumps to position 1 to start filling in cells. * See note about difference between rowspans.
This row has four cells in it which are all 1x1 blocks, filling in the same width of the row above it.
<table>
<tr>
<td rowspan="2"></td>
<td colspan="4"></td>
</tr>
<tr>
<td></td>
<td></td>
<td></td>
<td></td>
</tr>
</table>
The next row is all 1x1 cells. But, for example, what if you added an extra cell? Well, it would just pop off the edge to the right.
<table>
<tr>
<td rowspan="2"></td>
<td colspan="4"></td>
</tr>
<tr>
<td></td>
<td></td>
<td></td>
<td></td>
</tr>
<tr>
<td></td>
<td></td>
<td></td>
<td></td>
<td></td>
<td></td>
</tr>
</table>
* But what if we instead (rather than adding the extra cell) made all these cells have a rowspan of 2? The thing you need to consider here is that even though you're not going to be adding any more cells in the next row, the row still must exist (even though it's an empty row). If you did try to add new cells in the row immediately after, you'd notice that it would start adding them to the end of the bottom row.
<table>
<tr>
<td rowspan="2"></td>
<td colspan="4"></td>
</tr>
<tr>
<td></td>
<td></td>
<td></td>
<td></td>
</tr>
<tr>
<td rowspan="2"></td>
<td rowspan="2"></td>
<td rowspan="2"></td>
<td rowspan="2"></td>
<td rowspan="2"></td>
</tr>
<tr>
<td></td>
</tr>
</table>
Enjoy the wonderful world of creating tables!
I'd suggest:
table {
empty-cells: show;
border: 1px solid #000;
}
table td,
table th {
min-width: 2em;
min-height: 2em;
border: 1px solid #000;
}
<table>
<thead>
<tr>
<th rowspan="2"></th>
<th colspan="4"> </th>
</tr>
<tr>
<th>I</th>
<th>II</th>
<th>III</th>
<th>IIII</th>
</tr>
</thead>
<tbody>
<tr>
<td></td>
<td>1</td>
<td>2</td>
<td>3</td>
<td>4</td>
</tr>
</tbody>
</table>
References:
td element.
th element.
tbody element.
thead element.
table element.
If anyone is looking for a rowspan on both the left AND on the right,
here is how you can do it:
table {
border-collapse: collapse;
}
td {
padding: 20px;
border: 1px solid black;
text-align: center;
}
<table>
<tbody>
<tr>
<td rowspan="2">LEFT</td>
<td> 1 </td>
<td> 2 </td>
<td> 3 </td>
<td> 4 </td>
<td rowspan="2">RIGHT</td>
</tr>
<tr>
<td> 5 </td>
<td> 6 </td>
<td> 7 </td>
<td> 8 </td>
</tr>
<tr>
<td> - </td>
<td> - </td>
<td> - </td>
<td> - </td>
<td> - </td>
<td> - </td>
</tr>
</tbody>
</table>
Alternatively, if you want to add the LEFT and RIGHT to an existing rowset, you can achieve the same result by throwing them in with a collapsed colspan in between:
table {
border-collapse: collapse;
}
td {
padding: 20px;
border: 1px solid black;
text-align: center;
}
<table>
<tbody>
<tr>
<td rowspan="3">LEFT</td>
<td colspan="4" style="padding: 0; border-bottom: solid 1px transparent;"></td>
<td rowspan="3">RIGHT</td>
</tr>
<tr>
<td> 1 </td>
<td> 2 </td>
<td> 3 </td>
<td> 4 </td>
</tr>
<tr>
<td> 5 </td>
<td> 6 </td>
<td> 7 </td>
<td> 8 </td>
</tr>
<tr>
<td> - </td>
<td> - </td>
<td> - </td>
<td> - </td>
<td> - </td>
<td> - </td>
</tr>
</tbody>
</table>
Use rowspan if you want to extend cells down and colspan to extend across.
You can use rowspan="n" on a td element to make it span n rows, and colspan="m" on a td element to make it span m columns.
Looks like your first td needs a rowspan="2" and the next td needs a colspan="4".
The property you are looking for that first td is rowspan:
http://www.angelfire.com/fl5/html-tutorial/tables/tr_code.htm
<table>
<tr><td rowspan="2"></td><td colspan='4'></td></tr>
<tr><td></td><td></td><td></td><td></td></tr>
<tr><td></td><td></td><td></td><td></td><td></td></tr>
</table>
<style type="text/css">
table { border:2px black dotted; margin: auto; width: 100%; }
tr { border: 2px red dashed; }
td { border: 1px green solid; }
</style>
<table>
<tr>
<td rowspan="2">x</td>
<td colspan="4">y</td>
</tr>
<tr>
<td>I</td>
<td>II</td>
<td>III</td>
<td>IV</td>
</tr>
<tr>
<td>nothing</td>
<td>1</td>
<td>2</td>
<td>3</td>
<td>4</td>
</tr>
</table>
I have used ngIf for one of my similar logic. it is as follows:
<table>
<tr *ngFor="let object of objectData; let i= index;">
<td *ngIf="(i%(object.rowSpan))==0" [attr.rowspan]="object.rowSpan">{{object.value}}</td>
</tr>
</table>
here,
i'm getting rowspan value from my model object.
<body>
<table>
<tr><td colspan="2" rowspan="2">1</td><td colspan="4">2</td></tr>
<tr><td>3</td><td>3</td><td>3</td><td>3</td></tr>
<tr><td colspan="2">1</td><td>3</td><td>3</td><td>3</td><td>3</td></tr>
</table>
</body>
Colspan and Rowspan
A table is divided into rows and each row is divided into cells. In some situations we need the Table Cells span across (or merged) more than one column or row. In these situations we can use Colspan or Rowspan attributes.
Colspan
The colspan attribute defines the number of columns a cell should span (or merge) horizontally. That is, you want to merge two or more Cells in a row into a single Cell.
<td colspan=2 >
How to colspan ?
<html>
<body >
<table border=1 >
<tr>
<td colspan=2 >
Merged
</td>
</tr>
<tr>
<td>
Third Cell
</td>
<td>
Forth Cell
</td>
</tr>
</table>
</body>
</html>
Rowspan
The rowspan attribute specifies the number of rows a cell should span vertically. That is , you want to merge two or more Cells in the same column as a single Cell vertically.
<td rowspan=2 >
How to Rowspan ?
<html>
<body >
<table border=1 >
<tr>
<td>
First Cell
</td>
<td rowspan=2 >
Merged
</td>
</tr>
<tr>
<td valign=middle>
Third Cell
</td>
</tr>
</table>
</body>
</html>
It is similar to your table
<table border=1 width=50%>
<tr>
<td rowspan="2">x</td>
<td colspan="4">y</td>
</tr>
<tr>
<td bgcolor=#FFFF00 >I</td>
<td>II</td>
<td bgcolor=#FFFF00>III</td>
<td>IV</td>
</tr>
<tr>
<td>empty</td>
<td bgcolor=#FFFF00>1</td>
<td>2</td>
<td bgcolor=#FFFF00>3</td>
<td>4</td>
</tr>
I need to have a table where each row can have a child table or other content below that row.
Is there any valid way to do this?
Add another <tr> after the current one with a colspan which spans all columns and then put another <td> with a <table> therein.
<tr>
<td>col1</td>
<td>col2</td>
<td>col3</td>
</tr>
<tr>
<td colspan="3">
<table>...</table>
</td>
</tr>
<tr>
<td>col1</td>
<td>col2</td>
<td>col3</td>
</tr>
The new table will then appear between the rows.
<table>
<tbody>
<tr>
<td>
<table>
<tbody>
<tr>
<td>
problem?
</td>
</tr>
</tbody>
</table>
</td>
</tr>
</tbody>
</table>
You can't put anything inside a table between the rows, all content has to be inside the table cells.
You can add another row, and use colspan to make it contain a single cell that spans the width of the table, and put the content in that cell.
<table>
<tr>
<td></td>
<td></td>
<td></td>
</tr>
<tr>
<td colspan="3"></td>
</tr>
</table>
There is no valid way. Only td-s and th-s are allowed in tr
You can however put only 1 td in the row, and set it's colspan attribute to the number of columns you have in the table.