Version control for MS Access? [duplicate] - ms-access

Question

I'm involved with updating an Access solution. It has a good amount of VBA, a number of queries, a small amount of tables, and a few forms for data entry & report generation. It's an ideal candidate for Access.
I want to make changes to the table design, the VBA, the queries, and the forms. How can I track my changes with version control? (we use Subversion, but this goes for any flavor) I can stick the entire mdb in subversion, but that will be storing a binary file, and I won't be able to tell that I just changed one line of VBA code.
I thought about copying the VBA code to separate files, and saving those, but I could see those quickly getting out of sync with what's in the database.

Answer 1

We wrote our own script in VBScript, that uses the undocumented Application.SaveAsText() in Access to export all code, form, macro and report modules. Here it is, it should give you some pointers. (Beware: some of the messages are in german, but you can easily change that.)
EDIT:
To summarize various comments below:
Our Project assumes an .adp-file. In order to get this work with .mdb/.accdb, you have to change OpenAccessProject() to OpenCurrentDatabase(). (Updated to use OpenAccessProject() if it sees a .adp extension, else use OpenCurrentDatabase().)
decompose.vbs:
' Usage:
' CScript decompose.vbs <input file> <path>
' Converts all modules, classes, forms and macros from an Access Project file (.adp) <input file> to
' text and saves the results in separate files to <path>. Requires Microsoft Access.
'
Option Explicit
const acForm = 2
const acModule = 5
const acMacro = 4
const acReport = 3
' BEGIN CODE
Dim fso
Set fso = CreateObject("Scripting.FileSystemObject")
dim sADPFilename
If (WScript.Arguments.Count = 0) then
MsgBox "Bitte den Dateinamen angeben!", vbExclamation, "Error"
Wscript.Quit()
End if
sADPFilename = fso.GetAbsolutePathName(WScript.Arguments(0))
Dim sExportpath
If (WScript.Arguments.Count = 1) then
sExportpath = ""
else
sExportpath = WScript.Arguments(1)
End If
exportModulesTxt sADPFilename, sExportpath
If (Err <> 0) and (Err.Description <> NULL) Then
MsgBox Err.Description, vbExclamation, "Error"
Err.Clear
End If
Function exportModulesTxt(sADPFilename, sExportpath)
Dim myComponent
Dim sModuleType
Dim sTempname
Dim sOutstring
dim myType, myName, myPath, sStubADPFilename
myType = fso.GetExtensionName(sADPFilename)
myName = fso.GetBaseName(sADPFilename)
myPath = fso.GetParentFolderName(sADPFilename)
If (sExportpath = "") then
sExportpath = myPath & "\Source\"
End If
sStubADPFilename = sExportpath & myName & "_stub." & myType
WScript.Echo "copy stub to " & sStubADPFilename & "..."
On Error Resume Next
fso.CreateFolder(sExportpath)
On Error Goto 0
fso.CopyFile sADPFilename, sStubADPFilename
WScript.Echo "starting Access..."
Dim oApplication
Set oApplication = CreateObject("Access.Application")
WScript.Echo "opening " & sStubADPFilename & " ..."
If (Right(sStubADPFilename,4) = ".adp") Then
oApplication.OpenAccessProject sStubADPFilename
Else
oApplication.OpenCurrentDatabase sStubADPFilename
End If
oApplication.Visible = false
dim dctDelete
Set dctDelete = CreateObject("Scripting.Dictionary")
WScript.Echo "exporting..."
Dim myObj
For Each myObj In oApplication.CurrentProject.AllForms
WScript.Echo " " & myObj.fullname
oApplication.SaveAsText acForm, myObj.fullname, sExportpath & "\" & myObj.fullname & ".form"
oApplication.DoCmd.Close acForm, myObj.fullname
dctDelete.Add "FO" & myObj.fullname, acForm
Next
For Each myObj In oApplication.CurrentProject.AllModules
WScript.Echo " " & myObj.fullname
oApplication.SaveAsText acModule, myObj.fullname, sExportpath & "\" & myObj.fullname & ".bas"
dctDelete.Add "MO" & myObj.fullname, acModule
Next
For Each myObj In oApplication.CurrentProject.AllMacros
WScript.Echo " " & myObj.fullname
oApplication.SaveAsText acMacro, myObj.fullname, sExportpath & "\" & myObj.fullname & ".mac"
dctDelete.Add "MA" & myObj.fullname, acMacro
Next
For Each myObj In oApplication.CurrentProject.AllReports
WScript.Echo " " & myObj.fullname
oApplication.SaveAsText acReport, myObj.fullname, sExportpath & "\" & myObj.fullname & ".report"
dctDelete.Add "RE" & myObj.fullname, acReport
Next
WScript.Echo "deleting..."
dim sObjectname
For Each sObjectname In dctDelete
WScript.Echo " " & Mid(sObjectname, 3)
oApplication.DoCmd.DeleteObject dctDelete(sObjectname), Mid(sObjectname, 3)
Next
oApplication.CloseCurrentDatabase
oApplication.CompactRepair sStubADPFilename, sStubADPFilename & "_"
oApplication.Quit
fso.CopyFile sStubADPFilename & "_", sStubADPFilename
fso.DeleteFile sStubADPFilename & "_"
End Function
Public Function getErr()
Dim strError
strError = vbCrLf & "----------------------------------------------------------------------------------------------------------------------------------------" & vbCrLf & _
"From " & Err.source & ":" & vbCrLf & _
" Description: " & Err.Description & vbCrLf & _
" Code: " & Err.Number & vbCrLf
getErr = strError
End Function
If you need a clickable Command, instead of using the command line, create a file named "decompose.cmd" with
cscript decompose.vbs youraccessapplication.adp
By default, all exported files go into a "Scripts" subfolder of your Access-application. The .adp/mdb file is also copied to this location (with a "stub" suffix) and stripped of all the exported modules, making it really small.
You MUST checkin this stub with the source-files, because most access settings and custom menu-bars cannot be exported any other way. Just be sure to commit changes to this file only, if you really changed some setting or menu.
Note: If you have any Autoexec-Makros defined in your Application, you may have to hold the Shift-key when you invoke the decompose to prevent it from executing and interfering with the export!
Of course, there is also the reverse script, to build the Application from the "Source"-Directory:
compose.vbs:
' Usage:
' WScript compose.vbs <file> <path>
' Converts all modules, classes, forms and macros in a directory created by "decompose.vbs"
' and composes then into an Access Project file (.adp). This overwrites any existing Modules with the
' same names without warning!!!
' Requires Microsoft Access.
Option Explicit
const acForm = 2
const acModule = 5
const acMacro = 4
const acReport = 3
Const acCmdCompileAndSaveAllModules = &H7E
' BEGIN CODE
Dim fso
Set fso = CreateObject("Scripting.FileSystemObject")
dim sADPFilename
If (WScript.Arguments.Count = 0) then
MsgBox "Please enter the file name!", vbExclamation, "Error"
Wscript.Quit()
End if
sADPFilename = fso.GetAbsolutePathName(WScript.Arguments(0))
Dim sPath
If (WScript.Arguments.Count = 1) then
sPath = ""
else
sPath = WScript.Arguments(1)
End If
importModulesTxt sADPFilename, sPath
If (Err <> 0) and (Err.Description <> NULL) Then
MsgBox Err.Description, vbExclamation, "Error"
Err.Clear
End If
Function importModulesTxt(sADPFilename, sImportpath)
Dim myComponent
Dim sModuleType
Dim sTempname
Dim sOutstring
' Build file and pathnames
dim myType, myName, myPath, sStubADPFilename
myType = fso.GetExtensionName(sADPFilename)
myName = fso.GetBaseName(sADPFilename)
myPath = fso.GetParentFolderName(sADPFilename)
' if no path was given as argument, use a relative directory
If (sImportpath = "") then
sImportpath = myPath & "\Source\"
End If
sStubADPFilename = sImportpath & myName & "_stub." & myType
' check for existing file and ask to overwrite with the stub
if (fso.FileExists(sADPFilename)) Then
WScript.StdOut.Write sADPFilename & " exists. Overwrite? (y/n) "
dim sInput
sInput = WScript.StdIn.Read(1)
if (sInput <> "y") Then
WScript.Quit
end if
fso.CopyFile sADPFilename, sADPFilename & ".bak"
end if
fso.CopyFile sStubADPFilename, sADPFilename
' launch MSAccess
WScript.Echo "starting Access..."
Dim oApplication
Set oApplication = CreateObject("Access.Application")
WScript.Echo "opening " & sADPFilename & " ..."
If (Right(sStubADPFilename,4) = ".adp") Then
oApplication.OpenAccessProject sADPFilename
Else
oApplication.OpenCurrentDatabase sADPFilename
End If
oApplication.Visible = false
Dim folder
Set folder = fso.GetFolder(sImportpath)
' load each file from the import path into the stub
Dim myFile, objectname, objecttype
for each myFile in folder.Files
objecttype = fso.GetExtensionName(myFile.Name)
objectname = fso.GetBaseName(myFile.Name)
WScript.Echo " " & objectname & " (" & objecttype & ")"
if (objecttype = "form") then
oApplication.LoadFromText acForm, objectname, myFile.Path
elseif (objecttype = "bas") then
oApplication.LoadFromText acModule, objectname, myFile.Path
elseif (objecttype = "mac") then
oApplication.LoadFromText acMacro, objectname, myFile.Path
elseif (objecttype = "report") then
oApplication.LoadFromText acReport, objectname, myFile.Path
end if
next
oApplication.RunCommand acCmdCompileAndSaveAllModules
oApplication.Quit
End Function
Public Function getErr()
Dim strError
strError = vbCrLf & "----------------------------------------------------------------------------------------------------------------------------------------" & vbCrLf & _
"From " & Err.source & ":" & vbCrLf & _
" Description: " & Err.Description & vbCrLf & _
" Code: " & Err.Number & vbCrLf
getErr = strError
End Function
Again, this goes with a companion "compose.cmd" containing:
cscript compose.vbs youraccessapplication.adp
It asks you to confirm overwriting your current application and first creates a backup, if you do. It then collects all source-files in the Source-Directory and re-inserts them into the stub.
Have Fun!

Answer 2

It appears to be something quite available in Access:
This link from msdn explains how to install a source control add-in for Microsoft Access. This shipped as a free download as a part of the Access Developer Extensions for Access 2007 and as a separate free add-in for Access 2003.
I am glad you asked this question and I took the time to look it up, as I would like this ability too. The link above has more information on this and links to the add-ins.
Update:
I installed the add-in for Access 2003. It will only work with VSS, but it does allow me to put Access objects (forms, queries, tables, modules, ect) into the repository. When you go edit any item in the repo you are asked to check it out, but you don't have to. Next I am going to check how it handles being opened and changed on a systems without the add-in. I am not a fan of VSS, but I really do like the thought of storing access objects in a repo.
Update2:
Machines without the add-in are unable to make any changes to the database structure (add table fields, query parameters, etc.). At first I thought this might be a problem if someone needed to, as there was no apparent way to remove the Access database from source control if Access didn't have the add-in loaded.
Id discovered that running "compact and repair" database prompts you if you want to remove the database from source control. I opted yes and was able to edit the database without the add-in. The article in the link above also give instructions in setting up Access 2003 and 2007 to use Team System. If you can find a MSSCCI provider for SVN, there is a good chance you can get that to work.

Answer 3

The compose/decompose solution posted by Oliver is great, but it has some problems:
The files are encoded as UCS-2 (UTF-16) which can cause version control systems/tools to consider the files to be binary.
The files contain a lot of cruft that changes often - checksums, printer information and more. This is a serious problem if you want clean diffs or need to cooperate on the project.
I was planning to fix this myself, but discovered there is already a good solution available: timabell/msaccess-vcs-integration on GitHub. I have tested msaccess-vcs-integration and it does work great.
Updated 3rd of March 2015: The project was originally maintained/owned by bkidwell on Github, but it was transferred to timabell - link above to project is updated accordingly. There are some forks from the original project by bkidwell, for example by ArminBra and by matonb, which AFAICT shouldn't be used.
The downside to using msaccess-vcs-integration compared to Olivers's decompose solution:
It's significantly slower. I'm sure that the speed issue can be fixed, but I don't need to export my project to text that often ...
It doesn't create a stub Access project with the exported stuff removed. This can also be fixed (by adopting code from the decompose script), but again - not that important.
Anyway, my clear recommendation is msaccess-vcs-integration. It solved all the problems I had with using Git on the exported files.

Answer 4

Olivers answer rocks, but the CurrentProject reference was not working for me. I ended up ripping the guts out of the middle of his export and replacing it with this, based on a similar solution by Arvin Meyer. Has the advantage of exporting Queries if you are using an mdb instead of an adp.
' Writes database componenets to a series of text files
' #author Arvin Meyer
' #date June 02, 1999
Function DocDatabase(oApp)
Dim dbs
Dim cnt
Dim doc
Dim i
Dim prefix
Dim dctDelete
Dim docName
Const acQuery = 1
Set dctDelete = CreateObject("Scripting.Dictionary")
Set dbs = oApp.CurrentDb() ' use CurrentDb() to refresh Collections
Set cnt = dbs.Containers("Forms")
prefix = oApp.CurrentProject.Path & "\"
For Each doc In cnt.Documents
oApp.SaveAsText acForm, doc.Name, prefix & doc.Name & ".frm"
dctDelete.Add "frm_" & doc.Name, acForm
Next
Set cnt = dbs.Containers("Reports")
For Each doc In cnt.Documents
oApp.SaveAsText acReport, doc.Name, prefix & doc.Name & ".rpt"
dctDelete.Add "rpt_" & doc.Name, acReport
Next
Set cnt = dbs.Containers("Scripts")
For Each doc In cnt.Documents
oApp.SaveAsText acMacro, doc.Name, prefix & doc.Name & ".vbs"
dctDelete.Add "vbs_" & doc.Name, acMacro
Next
Set cnt = dbs.Containers("Modules")
For Each doc In cnt.Documents
oApp.SaveAsText acModule, doc.Name, prefix & doc.Name & ".bas"
dctDelete.Add "bas_" & doc.Name, acModule
Next
For i = 0 To dbs.QueryDefs.Count - 1
oApp.SaveAsText acQuery, dbs.QueryDefs(i).Name, prefix & dbs.QueryDefs(i).Name & ".txt"
dctDelete.Add "qry_" & dbs.QueryDefs(i).Name, acQuery
Next
WScript.Echo "deleting " & dctDelete.Count & " objects."
For Each docName In dctDelete
WScript.Echo " " & Mid(docName, 5)
oApp.DoCmd.DeleteObject dctDelete(docName), Mid(docName, 5)
Next
Set doc = Nothing
Set cnt = Nothing
Set dbs = Nothing
Set dctDelete = Nothing
End Function

Answer 5

We developped our own internal tool, where:
Modules: are exported as txt files and then compared with "file compare tool" (freeware)
Forms: are exported through the undocument application.saveAsText command. It is then possible to see the differences between 2 different versions ("file compare tool" once again).
Macros: we do not have any macro to compare, as we only have the "autoexec" macro with one line launching the main VBA procedure
Queries: are just text strings stored in a table: see infra
tables: we wrote our own table comparer, listing differences in records AND table structure.
The whole system is smart enough to allow us to produce "runtime" versions of our Access application, automatically generated from txt files (modules, and forms being recreated with the undocument application.loadFromText command) and mdb files (tables).
It might sound strange but it works.

Answer 6

Based on the ideas of this post and similar entries in some blogs I have wrote an application that works with mdb and adp file formats. It import/export all database objects (including tables, references, relations and database properties) to plain text files.
With those files you can work with a any source version control. Next version will allow import back the plain text files to the database. There will be also a command line tool
You can download the application or the source code from: http://accesssvn.codeplex.com/
regards

Answer 7

Resurrecting an old thread but this is a good one. I've implemented the two scripts (compose.vbs / decompose.vbs) for my own project and ran into a problem with old .mdb files:
It stalls when it gets to a form that includes the code:
NoSaveCTIWhenDisabled =1
Access says it has a problem and that's the end of the story. I ran some tests and played around trying to get around this issue and found this thread with a work around at the end:
Can't create database
Basically (in case the thread goes dead), you take the .mdb and do a "Save as" to the new .accdb format. Then the source safe or compose/decompose stuff will work. I also had to play around for 10 minutes to get the right command line syntax for the (de)compose scripts to work right so here's that info as well:
To compose (say your stuff is located in C:\SControl (create a sub folder named Source to store the extracted files):
'(to extract for importing to source control)
cscript compose.vbs database.accdb
'(to rebuild from extracted files saved from an earlier date)
cscript decompose.vbs database.accdb C:\SControl\Source\
That's it!
The versions of Access where I've experienced the problem above include Access 2000-2003 ".mdb" databases and fixed the problem by saving them into the 2007-2010 ".accdb" formats prior to running the compose/decompose scripts. After the conversion the scripts work just fine!

Answer 8

Text-file only solution (queries, tables and relationships included)
I have altered the Oliver's pair of scripts so that they export/import relationships, tables and queries in addition to modules, classes, forms and macros. Everything is saved into plaintext files, so there is no database file created to be stored with the text files in version control.
Export into text files (decompose.vbs)
' Usage:
' cscript decompose.vbs <input file> <path>
' Converts all modules, classes, forms and macros from an Access Project file (.adp) <input file> to
' text and saves the results in separate files to <path>. Requires Microsoft Access.
Option Explicit
Const acForm = 2
Const acModule = 5
Const acMacro = 4
Const acReport = 3
Const acQuery = 1
Const acExportTable = 0
' BEGIN CODE
Dim fso, relDoc, ACCDBFilename, sExportpath
Set fso = CreateObject("Scripting.FileSystemObject")
Set relDoc = CreateObject("Microsoft.XMLDOM")
If (Wscript.Arguments.Count = 0) Then
MsgBox "Please provide the .accdb database file", vbExclamation, "Error"
Wscript.Quit()
End If
ACCDBFilename = fso.GetAbsolutePathName(Wscript.Arguments(0))
If (Wscript.Arguments.Count = 1) Then
sExportpath = ""
Else
sExportpath = Wscript.Arguments(1)
End If
exportModulesTxt ACCDBFilename, sExportpath
If (Err <> 0) And (Err.Description <> Null) Then
MsgBox Err.Description, vbExclamation, "Error"
Err.Clear
End If
Function exportModulesTxt(ACCDBFilename, sExportpath)
Dim myComponent, sModuleType, sTempname, sOutstring
Dim myType, myName, myPath, hasRelations
myType = fso.GetExtensionName(ACCDBFilename)
myName = fso.GetBaseName(ACCDBFilename)
myPath = fso.GetParentFolderName(ACCDBFilename)
'if no path was given as argument, use a relative directory
If (sExportpath = "") Then
sExportpath = myPath & "\Source"
End If
'On Error Resume Next
fso.DeleteFolder (sExportpath)
fso.CreateFolder (sExportpath)
On Error GoTo 0
Wscript.Echo "starting Access..."
Dim oApplication
Set oApplication = CreateObject("Access.Application")
Wscript.Echo "Opening " & ACCDBFilename & " ..."
If (Right(ACCDBFilename, 4) = ".adp") Then
oApplication.OpenAccessProject ACCDBFilename
Else
oApplication.OpenCurrentDatabase ACCDBFilename
End If
oApplication.Visible = False
Wscript.Echo "exporting..."
Dim myObj
For Each myObj In oApplication.CurrentProject.AllForms
Wscript.Echo "Exporting FORM " & myObj.FullName
oApplication.SaveAsText acForm, myObj.FullName, sExportpath & "\" & myObj.FullName & ".form.txt"
oApplication.DoCmd.Close acForm, myObj.FullName
Next
For Each myObj In oApplication.CurrentProject.AllModules
Wscript.Echo "Exporting MODULE " & myObj.FullName
oApplication.SaveAsText acModule, myObj.FullName, sExportpath & "\" & myObj.FullName & ".module.txt"
Next
For Each myObj In oApplication.CurrentProject.AllMacros
Wscript.Echo "Exporting MACRO " & myObj.FullName
oApplication.SaveAsText acMacro, myObj.FullName, sExportpath & "\" & myObj.FullName & ".macro.txt"
Next
For Each myObj In oApplication.CurrentProject.AllReports
Wscript.Echo "Exporting REPORT " & myObj.FullName
oApplication.SaveAsText acReport, myObj.FullName, sExportpath & "\" & myObj.FullName & ".report.txt"
Next
For Each myObj In oApplication.CurrentDb.QueryDefs
Wscript.Echo "Exporting QUERY " & myObj.Name
oApplication.SaveAsText acQuery, myObj.Name, sExportpath & "\" & myObj.Name & ".query.txt"
Next
For Each myObj In oApplication.CurrentDb.TableDefs
If Not Left(myObj.Name, 4) = "MSys" Then
Wscript.Echo "Exporting TABLE " & myObj.Name
oApplication.ExportXml acExportTable, myObj.Name, , sExportpath & "\" & myObj.Name & ".table.txt"
'put the file path as a second parameter if you want to export the table data as well, instead of ommiting it and passing it into a third parameter for structure only
End If
Next
hasRelations = False
relDoc.appendChild relDoc.createElement("Relations")
For Each myObj In oApplication.CurrentDb.Relations 'loop though all the relations
If Not Left(myObj.Name, 4) = "MSys" Then
Dim relName, relAttrib, relTable, relFoTable, fld
hasRelations = True
relDoc.ChildNodes(0).appendChild relDoc.createElement("Relation")
Set relName = relDoc.createElement("Name")
relName.Text = myObj.Name
relDoc.ChildNodes(0).LastChild.appendChild relName
Set relAttrib = relDoc.createElement("Attributes")
relAttrib.Text = myObj.Attributes
relDoc.ChildNodes(0).LastChild.appendChild relAttrib
Set relTable = relDoc.createElement("Table")
relTable.Text = myObj.Table
relDoc.ChildNodes(0).LastChild.appendChild relTable
Set relFoTable = relDoc.createElement("ForeignTable")
relFoTable.Text = myObj.ForeignTable
relDoc.ChildNodes(0).LastChild.appendChild relFoTable
Wscript.Echo "Exporting relation " & myObj.Name & " between tables " & myObj.Table & " -> " & myObj.ForeignTable
For Each fld In myObj.Fields 'in case the relationship works with more fields
Dim lf, ff
relDoc.ChildNodes(0).LastChild.appendChild relDoc.createElement("Field")
Set lf = relDoc.createElement("Name")
lf.Text = fld.Name
relDoc.ChildNodes(0).LastChild.LastChild.appendChild lf
Set ff = relDoc.createElement("ForeignName")
ff.Text = fld.ForeignName
relDoc.ChildNodes(0).LastChild.LastChild.appendChild ff
Wscript.Echo " Involving fields " & fld.Name & " -> " & fld.ForeignName
Next
End If
Next
If hasRelations Then
relDoc.InsertBefore relDoc.createProcessingInstruction("xml", "version='1.0'"), relDoc.ChildNodes(0)
relDoc.Save sExportpath & "\relations.rel.txt"
Wscript.Echo "Relations successfuly saved in file relations.rel.txt"
End If
oApplication.CloseCurrentDatabase
oApplication.Quit
End Function
You can execute this script by calling cscript decompose.vbs <path to file to decompose> <folder to store text files>. In case you omit the second parameter, it will create 'Source' folder where the database is located. Please note that destination folder will be wiped if it already exists.
Include data in the exported tables
Replace line 93: oApplication.ExportXML acExportTable, myObj.Name, , sExportpath & "\" & myObj.Name & ".table.txt"
with line oApplication.ExportXML acExportTable, myObj.Name, sExportpath & "\" & myObj.Name & ".table.txt"
Import into Create database file (compose.vbs)
' Usage:
' cscript compose.vbs <file> <path>
' Reads all modules, classes, forms, macros, queries, tables and their relationships in a directory created by "decompose.vbs"
' and composes then into an Access Database file (.accdb).
' Requires Microsoft Access.
Option Explicit
Const acForm = 2
Const acModule = 5
Const acMacro = 4
Const acReport = 3
Const acQuery = 1
Const acStructureOnly = 0 'change 0 to 1 if you want import StructureAndData instead of StructureOnly
Const acCmdCompileAndSaveAllModules = &H7E
Dim fso, relDoc, ACCDBFilename, sPath
Set fso = CreateObject("Scripting.FileSystemObject")
Set relDoc = CreateObject("Microsoft.XMLDOM")
If (Wscript.Arguments.Count = 0) Then
MsgBox "Please provide the .accdb database file", vbExclamation, "Error"
Wscript.Quit()
End If
ACCDBFilename = fso.GetAbsolutePathName(Wscript.Arguments(0))
If (Wscript.Arguments.Count = 1) Then
sPath = ""
Else
sPath = Wscript.Arguments(1)
End If
importModulesTxt ACCDBFilename, sPath
If (Err <> 0) And (Err.Description <> Null) Then
MsgBox Err.Description, vbExclamation, "Error"
Err.Clear
End If
Function importModulesTxt(ACCDBFilename, sImportpath)
Dim myComponent, sModuleType, sTempname, sOutstring
' Build file and pathnames
Dim myType, myName, myPath
myType = fso.GetExtensionName(ACCDBFilename)
myName = fso.GetBaseName(ACCDBFilename)
myPath = fso.GetParentFolderName(ACCDBFilename)
' if no path was given as argument, use a relative directory
If (sImportpath = "") Then
sImportpath = myPath & "\Source\"
End If
' check for existing file and ask to overwrite with the stub
If fso.FileExists(ACCDBFilename) Then
Wscript.StdOut.Write ACCDBFilename & " already exists. Overwrite? (y/n) "
Dim sInput
sInput = Wscript.StdIn.Read(1)
If (sInput <> "y") Then
Wscript.Quit
Else
If fso.FileExists(ACCDBFilename & ".bak") Then
fso.DeleteFile (ACCDBFilename & ".bak")
End If
fso.MoveFile ACCDBFilename, ACCDBFilename & ".bak"
End If
End If
Wscript.Echo "starting Access..."
Dim oApplication
Set oApplication = CreateObject("Access.Application")
Wscript.Echo "Opening " & ACCDBFilename
If (Right(ACCDBFilename, 4) = ".adp") Then
oApplication.CreateAccessProject ACCDBFilename
Else
oApplication.NewCurrentDatabase ACCDBFilename
End If
oApplication.Visible = False
Dim folder
Set folder = fso.GetFolder(sImportpath)
'load each file from the import path into the stub
Dim myFile, objectname, objecttype
For Each myFile In folder.Files
objectname = fso.GetBaseName(myFile.Name) 'get rid of .txt extension
objecttype = fso.GetExtensionName(objectname)
objectname = fso.GetBaseName(objectname)
Select Case objecttype
Case "form"
Wscript.Echo "Importing FORM from file " & myFile.Name
oApplication.LoadFromText acForm, objectname, myFile.Path
Case "module"
Wscript.Echo "Importing MODULE from file " & myFile.Name
oApplication.LoadFromText acModule, objectname, myFile.Path
Case "macro"
Wscript.Echo "Importing MACRO from file " & myFile.Name
oApplication.LoadFromText acMacro, objectname, myFile.Path
Case "report"
Wscript.Echo "Importing REPORT from file " & myFile.Name
oApplication.LoadFromText acReport, objectname, myFile.Path
Case "query"
Wscript.Echo "Importing QUERY from file " & myFile.Name
oApplication.LoadFromText acQuery, objectname, myFile.Path
Case "table"
Wscript.Echo "Importing TABLE from file " & myFile.Name
oApplication.ImportXml myFile.Path, acStructureOnly
Case "rel"
Wscript.Echo "Found RELATIONSHIPS file " & myFile.Name & " ... opening, it will be processed after everything else has been imported"
relDoc.Load (myFile.Path)
End Select
Next
If relDoc.readyState Then
Wscript.Echo "Preparing to build table dependencies..."
Dim xmlRel, xmlField, accessRel, relTable, relName, relFTable, relAttr, i
For Each xmlRel In relDoc.SelectNodes("/Relations/Relation") 'loop through every Relation node inside .xml file
relName = xmlRel.SelectSingleNode("Name").Text
relTable = xmlRel.SelectSingleNode("Table").Text
relFTable = xmlRel.SelectSingleNode("ForeignTable").Text
relAttr = xmlRel.SelectSingleNode("Attributes").Text
'remove any possible conflicting relations or indexes
On Error Resume Next
oApplication.CurrentDb.Relations.Delete (relName)
oApplication.CurrentDb.TableDefs(relTable).Indexes.Delete (relName)
oApplication.CurrentDb.TableDefs(relFTable).Indexes.Delete (relName)
On Error GoTo 0
Wscript.Echo "Creating relation " & relName & " between tables " & relTable & " -> " & relFTable
Set accessRel = oApplication.CurrentDb.CreateRelation(relName, relTable, relFTable, relAttr) 'create the relationship object
For Each xmlField In xmlRel.SelectNodes("Field") 'in case the relationship works with more fields
accessRel.Fields.Append accessRel.CreateField(xmlField.SelectSingleNode("Name").Text)
accessRel.Fields(xmlField.SelectSingleNode("Name").Text).ForeignName = xmlField.SelectSingleNode("ForeignName").Text
Wscript.Echo " Involving fields " & xmlField.SelectSingleNode("Name").Text & " -> " & xmlField.SelectSingleNode("ForeignName").Text
Next
oApplication.CurrentDb.Relations.Append accessRel 'append the newly created relationship to the database
Wscript.Echo " Relationship added"
Next
End If
oApplication.RunCommand acCmdCompileAndSaveAllModules
oApplication.Quit
End Function
You can execute this script by calling cscript compose.vbs <path to file which should be created> <folder with text files>. In case you omit the second parameter, it will look into 'Source' folder where the database should be created.
Import data from text file
Replace line 14: const acStructureOnly = 0 with const acStructureOnly = 1. This will work only if you have included the data in exported table.
Things that are not covered
I have tested this only with .accdb files, so with anything else there might be some bugs.
Setting are not exported, I would recommend creating the Macro that will apply the setting at start of the database.
Some unknown queries sometimes get exported that are preceded with '~'. I don't know if they are necessary.
MSAccess object names can contain characters that are invalid for filenames - the script will fail when trying to write them. You may normalize all filenames, but then you cannot import them back.
One of my other resources while working on this script was this answer, which helped me to figure out how to export relationships.

Answer 9

There's a gotcha - VSS 6.0 can only accept MDB's using the add-in under a certain number of objects, which includes all local tables, queries, modules, and forms. Don't know the exact object limit.
To build our 10 year old prod floor app, which is huge, we are forced to combine 3 or 4 separate MDBs out of SS into one MDB , which complicates automated builds to the point we don't waste time doing it.
I think I'll try the script above to spew this MDb into SVN and simplify builds for everyone.

Answer 10

For those using Access 2010, SaveAsText is not a visible method in Intellisense but it appears to be a valid method, as Arvin Meyer's script mentioned earlier worked fine for me.
Interestingly, SaveAsAXL is new to 2010 and has the same signature as SaveAsText, though it appears it will only work with web databases, which require SharePoint Server 2010.

Answer 11

We had the same issue a while ago.
Our first try was a third-party tool which offers a proxy of the SourceSafe API for Subversion to be used with MS Access and VB 6. The Tool can be found here.
As we were not that satisfied with that tool we switched over to Visual SourceSafe and the VSS Acces Plugin.

Answer 12

I'm using Oasis-Svn
http://dev2dev.de/
I just can tell it has saved me at least once. My mdb was growing beyond 2 GB and that broke it. I could go back to an old version and import the Forms and just lost a day or so of work.

Answer 13

I found this tool on SourceForge: http://sourceforge.net/projects/avc/
I haven't used it, but it may be a start for you. There may be some other 3rd party tools that integrate with VSS or SVN that do what you need.
Personally I just keep a plain text file handy to keep a change log. When I commit the binary MDB, I use the entries in the change log as my commit comment.

Answer 14

For completeness...
There's always "Visual Studio [YEAR] Tools for the Microsoft Office System"
(http://msdn.microsoft.com/en-us/vs2005/aa718673.aspx) but that seems to require VSS. To me VSS (auto corrupting) is worse than my 347 save points on my uber backuped network share.

Answer 15

i'm using the Access 2003 Add-in: Source Code Control. It works fine. One Problem are invalid characters like a ":".
I'm checkin in and out. Internly the Add-In do the same as the code up there, but with more tool support. I can see if an object is checked out and refresh the objects.

Answer 16

You can also connect your MS Access to the Team Foundation Server. There is also a free Express variant for up to 5 developers. Works really well!
English guide
Team Foundation Server 2012 Express
Edit: fixed link

Answer 17

The answer from Oliver works great. Please find my extended version below that adds support for Access queries.
(please see answer from Oliver for more information/usage)
decompose.vbs:
' Usage:
' CScript decompose.vbs <input file> <path>
' Converts all modules, classes, forms and macros from an Access Project file (.adp) <input file> to
' text and saves the results in separate files to <path>. Requires Microsoft Access.
'
Option Explicit
const acForm = 2
const acModule = 5
const acMacro = 4
const acReport = 3
const acQuery = 1
' BEGIN CODE
Dim fso
Set fso = CreateObject("Scripting.FileSystemObject")
dim sADPFilename
If (WScript.Arguments.Count = 0) then
MsgBox "Bitte den Dateinamen angeben!", vbExclamation, "Error"
Wscript.Quit()
End if
sADPFilename = fso.GetAbsolutePathName(WScript.Arguments(0))
Dim sExportpath
If (WScript.Arguments.Count = 1) then
sExportpath = ""
else
sExportpath = WScript.Arguments(1)
End If
exportModulesTxt sADPFilename, sExportpath
If (Err <> 0) and (Err.Description <> NULL) Then
MsgBox Err.Description, vbExclamation, "Error"
Err.Clear
End If
Function exportModulesTxt(sADPFilename, sExportpath)
Dim myComponent
Dim sModuleType
Dim sTempname
Dim sOutstring
dim myType, myName, myPath, sStubADPFilename
myType = fso.GetExtensionName(sADPFilename)
myName = fso.GetBaseName(sADPFilename)
myPath = fso.GetParentFolderName(sADPFilename)
If (sExportpath = "") then
sExportpath = myPath & "\Source\"
End If
sStubADPFilename = sExportpath & myName & "_stub." & myType
WScript.Echo "copy stub to " & sStubADPFilename & "..."
On Error Resume Next
fso.CreateFolder(sExportpath)
On Error Goto 0
fso.CopyFile sADPFilename, sStubADPFilename
WScript.Echo "starting Access..."
Dim oApplication
Set oApplication = CreateObject("Access.Application")
WScript.Echo "opening " & sStubADPFilename & " ..."
If (Right(sStubADPFilename,4) = ".adp") Then
oApplication.OpenAccessProject sStubADPFilename
Else
oApplication.OpenCurrentDatabase sStubADPFilename
End If
oApplication.Visible = false
dim dctDelete
Set dctDelete = CreateObject("Scripting.Dictionary")
WScript.Echo "exporting..."
Dim myObj
For Each myObj In oApplication.CurrentProject.AllForms
WScript.Echo " " & myObj.fullname
oApplication.SaveAsText acForm, myObj.fullname, sExportpath & "\" & myObj.fullname & ".form"
oApplication.DoCmd.Close acForm, myObj.fullname
dctDelete.Add "FO" & myObj.fullname, acForm
Next
For Each myObj In oApplication.CurrentProject.AllModules
WScript.Echo " " & myObj.fullname
oApplication.SaveAsText acModule, myObj.fullname, sExportpath & "\" & myObj.fullname & ".bas"
dctDelete.Add "MO" & myObj.fullname, acModule
Next
For Each myObj In oApplication.CurrentProject.AllMacros
WScript.Echo " " & myObj.fullname
oApplication.SaveAsText acMacro, myObj.fullname, sExportpath & "\" & myObj.fullname & ".mac"
dctDelete.Add "MA" & myObj.fullname, acMacro
Next
For Each myObj In oApplication.CurrentProject.AllReports
WScript.Echo " " & myObj.fullname
oApplication.SaveAsText acReport, myObj.fullname, sExportpath & "\" & myObj.fullname & ".report"
dctDelete.Add "RE" & myObj.fullname, acReport
Next
For Each myObj In oApplication.CurrentDb.QueryDefs
if not left(myObj.name,3) = "~sq" then 'exclude queries defined by the forms. Already included in the form itself
WScript.Echo " " & myObj.name
oApplication.SaveAsText acQuery, myObj.name, sExportpath & "\" & myObj.name & ".query"
oApplication.DoCmd.Close acQuery, myObj.name
dctDelete.Add "FO" & myObj.name, acQuery
end if
Next
WScript.Echo "deleting..."
dim sObjectname
For Each sObjectname In dctDelete
WScript.Echo " " & Mid(sObjectname, 3)
oApplication.DoCmd.DeleteObject dctDelete(sObjectname), Mid(sObjectname, 3)
Next
oApplication.CloseCurrentDatabase
oApplication.CompactRepair sStubADPFilename, sStubADPFilename & "_"
oApplication.Quit
fso.CopyFile sStubADPFilename & "_", sStubADPFilename
fso.DeleteFile sStubADPFilename & "_"
End Function
Public Function getErr()
Dim strError
strError = vbCrLf & "----------------------------------------------------------------------------------------------------------------------------------------" & vbCrLf & _
"From " & Err.source & ":" & vbCrLf & _
" Description: " & Err.Description & vbCrLf & _
" Code: " & Err.Number & vbCrLf
getErr = strError
End Function
compose.vbs:
' Usage:
' WScript compose.vbs <file> <path>
' Converts all modules, classes, forms and macros in a directory created by "decompose.vbs"
' and composes then into an Access Project file (.adp). This overwrites any existing Modules with the
' same names without warning!!!
' Requires Microsoft Access.
Option Explicit
const acForm = 2
const acModule = 5
const acMacro = 4
const acReport = 3
const acQuery = 1
Const acCmdCompileAndSaveAllModules = &H7E
' BEGIN CODE
Dim fso
Set fso = CreateObject("Scripting.FileSystemObject")
dim sADPFilename
If (WScript.Arguments.Count = 0) then
MsgBox "Bitte den Dateinamen angeben!", vbExclamation, "Error"
Wscript.Quit()
End if
sADPFilename = fso.GetAbsolutePathName(WScript.Arguments(0))
Dim sPath
If (WScript.Arguments.Count = 1) then
sPath = ""
else
sPath = WScript.Arguments(1)
End If
importModulesTxt sADPFilename, sPath
If (Err <> 0) and (Err.Description <> NULL) Then
MsgBox Err.Description, vbExclamation, "Error"
Err.Clear
End If
Function importModulesTxt(sADPFilename, sImportpath)
Dim myComponent
Dim sModuleType
Dim sTempname
Dim sOutstring
' Build file and pathnames
dim myType, myName, myPath, sStubADPFilename
myType = fso.GetExtensionName(sADPFilename)
myName = fso.GetBaseName(sADPFilename)
myPath = fso.GetParentFolderName(sADPFilename)
' if no path was given as argument, use a relative directory
If (sImportpath = "") then
sImportpath = myPath & "\Source\"
End If
sStubADPFilename = sImportpath & myName & "_stub." & myType
' check for existing file and ask to overwrite with the stub
if (fso.FileExists(sADPFilename)) Then
WScript.StdOut.Write sADPFilename & " existiert bereits. Überschreiben? (j/n) "
dim sInput
sInput = WScript.StdIn.Read(1)
if (sInput <> "j") Then
WScript.Quit
end if
fso.CopyFile sADPFilename, sADPFilename & ".bak"
end if
fso.CopyFile sStubADPFilename, sADPFilename
' launch MSAccess
WScript.Echo "starting Access..."
Dim oApplication
Set oApplication = CreateObject("Access.Application")
WScript.Echo "opening " & sADPFilename & " ..."
If (Right(sStubADPFilename,4) = ".adp") Then
oApplication.OpenAccessProject sADPFilename
Else
oApplication.OpenCurrentDatabase sADPFilename
End If
oApplication.Visible = false
Dim folder
Set folder = fso.GetFolder(sImportpath)
' load each file from the import path into the stub
Dim myFile, objectname, objecttype
for each myFile in folder.Files
objecttype = fso.GetExtensionName(myFile.Name)
objectname = fso.GetBaseName(myFile.Name)
WScript.Echo " " & objectname & " (" & objecttype & ")"
if (objecttype = "form") then
oApplication.LoadFromText acForm, objectname, myFile.Path
elseif (objecttype = "bas") then
oApplication.LoadFromText acModule, objectname, myFile.Path
elseif (objecttype = "mac") then
oApplication.LoadFromText acMacro, objectname, myFile.Path
elseif (objecttype = "report") then
oApplication.LoadFromText acReport, objectname, myFile.Path
elseif (objecttype = "query") then
oApplication.LoadFromText acQuery, objectname, myFile.Path
end if
next
oApplication.RunCommand acCmdCompileAndSaveAllModules
oApplication.Quit
End Function
Public Function getErr()
Dim strError
strError = vbCrLf & "----------------------------------------------------------------------------------------------------------------------------------------" & vbCrLf & _
"From " & Err.source & ":" & vbCrLf & _
" Description: " & Err.Description & vbCrLf & _
" Code: " & Err.Number & vbCrLf
getErr = strError
End Function

Answer 18

I tried to help contribute to his answer by adding an export option for Queries within the access database. (With ample help from other SO answers)
Dim def
Set stream = fso.CreateTextFile(sExportpath & "\" & myName & ".queries.txt")
For Each def In oApplication.CurrentDb.QueryDefs
WScript.Echo " Exporting Queries to Text..."
stream.WriteLine("Name: " & def.Name)
stream.WriteLine(def.SQL)
stream.writeline "--------------------------"
stream.writeline " "
Next
stream.Close
Haven't be able to work that back into the 'compose' feature, but that's not what I need it to do right now.
Note: I also added ".txt" to each of the exported file names in decompose.vbs so that the source control would immediately show me the file diffs.
Hope that helps!

Answer 19

This entry describes a totally different approach from the other entries, and may not be what you're looking for. So I won't be offended if you ignore this. But at least it is food for thought.
In some professional commercial software development environments, configuration management (CM) of software deliverables is not normally done within the software application itself or software project itself. CM is imposed upon the final deliverable products, by saving the software in a special CM folder, where both the file and its folder are marked with version identification.
For example, Clearcase allows the data manager to "check in" a software file, assign it a "branch", assign it a "bubble", and apply "labels".
When you want to see and download a file, you have to configure your "config spec" to point to the version you want, then cd into the folder and there it is.
Just an idea.

Answer 20

For anyone stuck with Access 97, I was not able to get the other answers to work. Using a combination of Oliver's and DaveParillo's excellent answers and making some modifications, I was able to get the scripts working with our Access 97 databases. It's also a bit more user-friendly since it asks which folder to place the files.
AccessExport.vbs:
' Converts all modules, classes, forms and macros from an Access file (.mdb) <input file> to
' text and saves the results in separate files to <path>. Requires Microsoft Access.
Option Explicit
Const acQuery = 1
Const acForm = 2
Const acModule = 5
Const acMacro = 4
Const acReport = 3
Const acCmdCompactDatabase = 4
Const TemporaryFolder = 2
Dim strMDBFileName : strMDBFileName = SelectDatabaseFile
Dim strExportPath : strExportPath = SelectExportFolder
CreateExportFolders(strExportPath)
Dim objProgressWindow
Dim strOverallProgress
CreateProgressWindow objProgressWindow
Dim strTempMDBFileName
CopyToTempDatabase strMDBFileName, strTempMDBFileName, strOverallProgress
Dim objAccess
Dim objDatabase
OpenAccessDatabase objAccess, objDatabase, strTempMDBFileName, strOverallProgress
ExportQueries objAccess, objDatabase, objProgressWindow, strExportPath, strOverallProgress
ExportForms objAccess, objDatabase, objProgressWindow, strExportPath, strOverallProgress
ExportReports objAccess, objDatabase, objProgressWindow, strExportPath, strOverallProgress
ExportMacros objAccess, objDatabase, objProgressWindow, strExportPath, strOverallProgress
ExportModules objAccess, objDatabase, objProgressWindow, strExportPath, strOverallProgress
objAccess.CloseCurrentDatabase
objAccess.Quit
DeleteTempDatabase strTempMDBFileName, strOverallProgress
objProgressWindow.Quit
MsgBox "Successfully exported database."
Private Function SelectDatabaseFile()
MsgBox "Please select the Access database to export."
Dim objFileOpen : Set objFileOpen = CreateObject("SAFRCFileDlg.FileOpen")
If objFileOpen.OpenFileOpenDlg Then
SelectDatabaseFile = objFileOpen.FileName
Else
WScript.Quit()
End If
End Function
Private Function SelectExportFolder()
Dim objShell : Set objShell = CreateObject("Shell.Application")
SelectExportFolder = objShell.BrowseForFolder(0, "Select folder to export the database to:", 0, "").self.path & "\"
End Function
Private Sub CreateExportFolders(strExportPath)
Dim objFileSystem : Set objFileSystem = CreateObject("Scripting.FileSystemObject")
MsgBox "Existing folders from a previous Access export under " & strExportPath & " will be deleted!"
If objFileSystem.FolderExists(strExportPath & "Queries\") Then
objFileSystem.DeleteFolder strExportPath & "Queries", true
End If
objFileSystem.CreateFolder(strExportPath & "Queries\")
If objFileSystem.FolderExists(strExportPath & "Forms\") Then
objFileSystem.DeleteFolder strExportPath & "Forms", true
End If
objFileSystem.CreateFolder(strExportPath & "Forms\")
If objFileSystem.FolderExists(strExportPath & "Reports\") Then
objFileSystem.DeleteFolder strExportPath & "Reports", true
End If
objFileSystem.CreateFolder(strExportPath & "Reports\")
If objFileSystem.FolderExists(strExportPath & "Macros\") Then
objFileSystem.DeleteFolder strExportPath & "Macros", true
End If
objFileSystem.CreateFolder(strExportPath & "Macros\")
If objFileSystem.FolderExists(strExportPath & "Modules\") Then
objFileSystem.DeleteFolder strExportPath & "Modules", true
End If
objFileSystem.CreateFolder(strExportPath & "Modules\")
End Sub
Private Sub CreateProgressWindow(objProgressWindow)
Set objProgressWindow = CreateObject ("InternetExplorer.Application")
objProgressWindow.Navigate "about:blank"
objProgressWindow.ToolBar = 0
objProgressWindow.StatusBar = 0
objProgressWindow.Width = 320
objProgressWindow.Height = 240
objProgressWindow.Visible = 1
objProgressWindow.Document.Title = "Access export in progress"
End Sub
Private Sub CopyToTempDatabase(strMDBFileName, strTempMDBFileName, strOverallProgress)
strOverallProgress = strOverallProgress & "Copying to temporary database...<br/>"
Dim objFileSystem : Set objFileSystem = CreateObject("Scripting.FileSystemObject")
strTempMDBFileName = objFileSystem.GetSpecialFolder(TemporaryFolder) & "\" & objFileSystem.GetBaseName(strMDBFileName) & "_temp.mdb"
objFileSystem.CopyFile strMDBFileName, strTempMDBFileName
End Sub
Private Sub OpenAccessDatabase(objAccess, objDatabase, strTempMDBFileName, strOverallProgress)
strOverallProgress = strOverallProgress & "Compacting temporary database...<br/>"
Set objAccess = CreateObject("Access.Application")
objAccess.Visible = false
CompactAccessDatabase objAccess, strTempMDBFileName
strOverallProgress = strOverallProgress & "Opening temporary database...<br/>"
objAccess.OpenCurrentDatabase strTempMDBFileName
Set objDatabase = objAccess.CurrentDb
End Sub
' Sometimes the Compact Database command errors out, and it's not serious if the database isn't compacted first.
Private Sub CompactAccessDatabase(objAccess, strTempMDBFileName)
On Error Resume Next
Dim objFileSystem : Set objFileSystem = CreateObject("Scripting.FileSystemObject")
objAccess.DbEngine.CompactDatabase strTempMDBFileName, strTempMDBFileName & "_"
objFileSystem.CopyFile strTempMDBFileName & "_", strTempMDBFileName
objFileSystem.DeleteFile strTempMDBFileName & "_"
End Sub
Private Sub ExportQueries(objAccess, objDatabase, objProgressWindow, strExportPath, strOverallProgress)
strOverallProgress = strOverallProgress & "Exporting Queries (Step 1 of 5)...<br/>"
Dim counter
For counter = 0 To objDatabase.QueryDefs.Count - 1
objProgressWindow.Document.Body.InnerHTML = strOverallProgress & counter + 1 & " of " & objDatabase.QueryDefs.Count
objAccess.SaveAsText acQuery, objDatabase.QueryDefs(counter).Name, strExportPath & "Queries\" & Clean(objDatabase.QueryDefs(counter).Name) & ".sql"
Next
End Sub
Private Sub ExportForms(objAccess, objDatabase, objProgressWindow, strExportPath, strOverallProgress)
strOverallProgress = strOverallProgress & "Exporting Forms (Step 2 of 5)...<br/>"
Dim counter : counter = 1
Dim objContainer : Set objContainer = objDatabase.Containers("Forms")
Dim objDocument
For Each objDocument In objContainer.Documents
objProgressWindow.Document.Body.InnerHTML = strOverallProgress & counter & " of " & objContainer.Documents.Count
counter = counter + 1
objAccess.SaveAsText acForm, objDocument.Name, strExportPath & "Forms\" & Clean(objDocument.Name) & ".form"
objAccess.DoCmd.Close acForm, objDocument.Name
Next
End Sub
Private Sub ExportReports(objAccess, objDatabase, objProgressWindow, strExportPath, strOverallProgress)
strOverallProgress = strOverallProgress & "Exporting Reports (Step 3 of 5)...<br/>"
Dim counter : counter = 1
Dim objContainer : Set objContainer = objDatabase.Containers("Reports")
Dim objDocument
For Each objDocument In objContainer.Documents
objProgressWindow.Document.Body.InnerHTML = strOverallProgress & counter & " of " & objContainer.Documents.Count
counter = counter + 1
objAccess.SaveAsText acReport, objDocument.Name, strExportPath & "Reports\" & Clean(objDocument.Name) & ".report"
Next
End Sub
Private Sub ExportMacros(objAccess, objDatabase, objProgressWindow, strExportPath, strOverallProgress)
strOverallProgress = strOverallProgress & "Exporting Macros (Step 4 of 5)...<br/>"
Dim counter : counter = 1
Dim objContainer : Set objContainer = objDatabase.Containers("Scripts")
Dim objDocument
For Each objDocument In objContainer.Documents
objProgressWindow.Document.Body.InnerHTML = strOverallProgress & counter & " of " & objContainer.Documents.Count
counter = counter + 1
objAccess.SaveAsText acMacro, objDocument.Name, strExportPath & "Macros\" & Clean(objDocument.Name) & ".macro"
Next
End Sub
Private Sub ExportModules(objAccess, objDatabase, objProgressWindow, strExportPath, strOverallProgress)
strOverallProgress = strOverallProgress & "Exporting Modules (Step 5 of 5)...<br/>"
Dim counter : counter = 1
Dim objContainer : Set objContainer = objDatabase.Containers("Modules")
Dim objDocument
For Each objDocument In objContainer.Documents
objProgressWindow.Document.Body.InnerHTML = strOverallProgress & counter & " of " & objContainer.Documents.Count
counter = counter + 1
objAccess.SaveAsText acModule, objDocument.Name, strExportPath & "Modules\" & Clean(objDocument.Name) & ".module"
Next
End Sub
Private Sub DeleteTempDatabase(strTempMDBFileName, strOverallProgress)
On Error Resume Next
strOverallProgress = strOverallProgress & "Deleting temporary database...<br/>"
Dim objFileSystem : Set objFileSystem = CreateObject("Scripting.FileSystemObject")
objFileSystem.DeleteFile strTempMDBFileName, true
End Sub
' Windows doesn't like certain characters, so we have to filter those out of the name when exporting
Private Function Clean(strInput)
Dim objRegexp : Set objRegexp = New RegExp
objRegexp.IgnoreCase = True
objRegexp.Global = True
objRegexp.Pattern = "[\\/:*?""<>|]"
Dim strOutput
If objRegexp.Test(strInput) Then
strOutput = objRegexp.Replace(strInput, "")
MsgBox strInput & " is being exported as " & strOutput
Else
strOutput = strInput
End If
Clean = strOutput
End Function
And for importing files into the database, should you need to recreate the database from scratch or you wish to modify files outside of Access for some reason.
AccessImport.vbs:
' Imports all of the queries, forms, reports, macros, and modules from text
' files to an Access file (.mdb). Requires Microsoft Access.
Option Explicit
const acQuery = 1
const acForm = 2
const acModule = 5
const acMacro = 4
const acReport = 3
const acCmdCompileAndSaveAllModules = &H7E
Dim strMDBFilename : strMDBFilename = SelectDatabaseFile
CreateBackup strMDBFilename
Dim strImportPath : strImportPath = SelectImportFolder
Dim objAccess
Dim objDatabase
OpenAccessDatabase objAccess, objDatabase, strMDBFilename
Dim objProgressWindow
Dim strOverallProgress
CreateProgressWindow objProgressWindow
ImportQueries objAccess, objDatabase, objProgressWindow, strImportPath, strOverallProgress
ImportForms objAccess, objDatabase, objProgressWindow, strImportPath, strOverallProgress
ImportReports objAccess, objDatabase, objProgressWindow, strImportPath, strOverallProgress
ImportMacros objAccess, objDatabase, objProgressWindow, strImportPath, strOverallProgress
ImportModules objAccess, objDatabase, objProgressWindow, strImportPath, strOverallProgress
objAccess.CloseCurrentDatabase
objAccess.Quit
objProgressWindow.Quit
MsgBox "Successfully imported objects into the database."
Private Function SelectDatabaseFile()
MsgBox "Please select the Access database to import the objects from. ALL EXISTING OBJECTS WITH THE SAME NAME WILL BE OVERWRITTEN!"
Dim objFileOpen : Set objFileOpen = CreateObject( "SAFRCFileDlg.FileOpen" )
If objFileOpen.OpenFileOpenDlg Then
SelectDatabaseFile = objFileOpen.FileName
Else
WScript.Quit()
End If
End Function
Private Function SelectImportFolder()
Dim objShell : Set objShell = WScript.CreateObject("Shell.Application")
SelectImportFolder = objShell.BrowseForFolder(0, "Select folder to import the database objects from:", 0, "").self.path & "\"
End Function
Private Sub CreateBackup(strMDBFilename)
Dim objFileSystem : Set objFileSystem = CreateObject("Scripting.FileSystemObject")
objFileSystem.CopyFile strMDBFilename, strMDBFilename & ".bak"
End Sub
Private Sub OpenAccessDatabase(objAccess, objDatabase, strMDBFileName)
Set objAccess = CreateObject("Access.Application")
objAccess.OpenCurrentDatabase strMDBFilename
objAccess.Visible = false
Set objDatabase = objAccess.CurrentDb
End Sub
Private Sub CreateProgressWindow(ByRef objProgressWindow)
Set objProgressWindow = CreateObject ("InternetExplorer.Application")
objProgressWindow.Navigate "about:blank"
objProgressWindow.ToolBar = 0
objProgressWindow.StatusBar = 0
objProgressWindow.Width = 320
objProgressWindow.Height = 240
objProgressWindow.Visible = 1
objProgressWindow.Document.Title = "Access import in progress"
End Sub
Private Sub ImportQueries(objAccess, objDatabase, objProgressWindow, strImportPath, strOverallProgress)
strOverallProgress = "Importing Queries (Step 1 of 5)...<br/>"
Dim counter : counter = 0
Dim folder : Set folder = objFileSystem.GetFolder(strImportPath & "Queries\")
Dim objFileSystem : Set objFileSystem = CreateObject("Scripting.FileSystemObject")
Dim file
Dim strQueryName
For Each file in folder.Files
objProgressWindow.Document.Body.InnerHTML = strOverallProgress & counter + 1 & " of " & folder.Files.Count
strQueryName = objFileSystem.GetBaseName(file.Name)
objAccess.LoadFromText acQuery, strQueryName, file.Path
counter = counter + 1
Next
End Sub
Private Sub ImportForms(objAccess, objDatabase, objProgressWindow, strImportPath, strOverallProgress)
strOverallProgress = strOverallProgress & "Importing Forms (Step 2 of 5)...<br/>"
Dim counter : counter = 0
Dim folder : Set folder = objFileSystem.GetFolder(strImportPath & "Forms\")
Dim objFileSystem : Set objFileSystem = CreateObject("Scripting.FileSystemObject")
Dim file
Dim strFormName
For Each file in folder.Files
objProgressWindow.Document.Body.InnerHTML = strOverallProgress & counter + 1 & " of " & folder.Files.Count
strFormName = objFileSystem.GetBaseName(file.Name)
objAccess.LoadFromText acForm, strFormName, file.Path
counter = counter + 1
Next
End Sub
Private Sub ImportReports(objAccess, objDatabase, objProgressWindow, strImportPath, strOverallProgress)
strOverallProgress = strOverallProgress & "Importing Reports (Step 3 of 5)...<br/>"
Dim counter : counter = 0
Dim folder : Set folder = objFileSystem.GetFolder(strImportPath & "Reports\")
Dim objFileSystem : Set objFileSystem = CreateObject("Scripting.FileSystemObject")
Dim file
Dim strReportName
For Each file in folder.Files
objProgressWindow.Document.Body.InnerHTML = strOverallProgress & counter + 1 & " of " & folder.Files.Count
strReportName = objFileSystem.GetBaseName(file.Name)
objAccess.LoadFromText acReport, strReportName, file.Path
counter = counter + 1
Next
End Sub
Private Sub ImportMacros(objAccess, objDatabase, objProgressWindow, strImportPath, strOverallProgress)
strOverallProgress = strOverallProgress & "Importing Macros (Step 4 of 5)...<br/>"
Dim counter : counter = 0
Dim folder : Set folder = objFileSystem.GetFolder(strImportPath & "Macros\")
Dim objFileSystem : Set objFileSystem = CreateObject("Scripting.FileSystemObject")
Dim file
Dim strMacroName
For Each file in folder.Files
objProgressWindow.Document.Body.InnerHTML = strOverallProgress & counter + 1 & " of " & folder.Files.Count
strMacroName = objFileSystem.GetBaseName(file.Name)
objAccess.LoadFromText acMacro, strMacroName, file.Path
counter = counter + 1
Next
End Sub
Private Sub ImportModules(objAccess, objDatabase, objProgressWindow, strImportPath, strOverallProgress)
strOverallProgress = strOverallProgress & "Importing Modules (Step 5 of 5)...<br/>"
Dim counter : counter = 0
Dim folder : Set folder = objFileSystem.GetFolder(strImportPath & "Modules\")
Dim objFileSystem : Set objFileSystem = CreateObject("Scripting.FileSystemObject")
Dim file
Dim strModuleName
For Each file in folder.Files
objProgressWindow.Document.Body.InnerHTML = strOverallProgress & counter + 1 & " of " & folder.Files.Count
strModuleName = objFileSystem.GetBaseName(file.Name)
objAccess.LoadFromText acModule, strModuleName, file.Path
counter = counter + 1
Next
' We need to compile the database whenever any module code changes.
If Not objAccess.IsCompiled Then
objAccess.RunCommand acCmdCompileAndSaveAllModules
End If
End Sub

Answer 21

I am using OASIS-SVN from https://dev2dev.de/
This is not for free but for a small price.
It exports code, qrys, frms etc. to a folder.
From there I am using Git.