I'm working on a small .Net project, I used in my project EntityFramework with MySQL server, i tried the official Full MySQL installer, but i need only the server from that package to reduce the size of my application installer, like that used in PHPMyAdmin Installer, please show me how/where find that.
No minimal installation is available from MySQL's site. They used to have an essentials version, but it's unavailable for versions >5.1.
One solution to your case is to create your own installation - it's not very complicated. The process (in general) is to include bin,data,lib, and share folders from a clean installation, run mysqld --install, and copy your my.ini file (you may need to tweak with its data folder). This can give sometimes you an installation size of about 5 MB.
Another solution will be to use MariaDB as a MySQL alternative - their MSI is about 80 MB.
there are smaller versions, about 32.1MB it only allows you just to install the base server and configure the instance, you can use things like NAVICAT to manage it, have been using it for a lot of my .NET projects and it has been working very well
you can get it from https://filehippo.com/download_mysql/
Related
I have a LAMP server on an EC2 instance. I downloaded phpMyAdmin using Amazon's guide here: http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/install-LAMP.html.
On the phpMyAdmin page it says that:
"A newer version of phpMyAdmin is available and you should consider upgrading. The newest version is 4.6.5.2, released on 2016-12-05."
and I need to update it and also MySQL to use new features they put on the updates.
I'm accessing the EC2 instance from the terminal in my Mac laptop. I've tried a lot of things but I couldn't manage it. I've tried
sudo yum install -y phpMyAdmin
sudo yum install
I tried to manually download the latest version from phpmyadmin.net and change the files in the folder but I couldn't access the phpmyadmin folder in the first place.
Any help would be appreciated,
Thanks
You're using the version of phpMyAdmin maintained by your distribution (presumably Fedora, CentOS, or Red Hat); this means that basically you're not responsible for (or able to) upgrade the software that's under control of the package manager (aside from running the updates occasionally). If you wish to use a different version, you're certainly able to remove the package manager version then install it manually. I don't use EPEL, but I believe the highest version currently distributed is 4.4.15.9 (reference, which I think is because of the older versions of PHP and/or MySQL which are currently shipped. So you might not be able to upgrade due to your MySQL or PHP versions, but YMMV.
Basically, if you're using the package managed version, the whole point is so you don't have to worry about manual updates.
You can disable the notification by adding the directive $cfg['VersionCheck'] = false; to your config.inc.php (which may be in /etc/ or /etc/phpmyadmin, but I'm just guessing about how your distribution may handle it.).
I have downloaded the MySQL from the following link:
http://dev.mysql.com/downloads/mysql/
Downloaded the version 8.0.0. I have OS X 10.10.5
Now, I suppose I need to configure a visual MySQL client on my laptop to write queries. For that, I have installed sequelpro (sequelpro.com).
I need help on following points:
- Since there are a number of sample databases which one can use to learn SQL, can you please guide me on few such databases. My objective is to learn advanced SQL.
- Also, how do I configure my client (sequelpro) to connect to that database so that I can run queries.
As of now, I am stuck with the following screenshot with no clue what to do next.
Thanks a lot. Screenshot here
Based on the fact you said in the comments you have OSX and you installed mysql manually without phpmyadmin I suggest you download and install mamp.
mamp
1: https://www.mamp.info/en/ is,
MAMP installs a local server environment in a matter of seconds on
your computer. It comes free of charge, and is easily installed. MAMP
will not compromise any existing Apache installation already running
on your system. You can install Apache, PHP and MySQL without starting
a script or having to change any configuration files! Furthermore, if
MAMP is no longer needed, just delete the MAMP folder and everything
returns to its original state (i.e. MAMP does not modify any of the
"normal" system).
Basically it is a fake server that runs on your computer. This will be yours for localhost development. You can use it to serve your localhost php applications, change versions of php and gives you a GUI for mysql which is phpmyadmin.
Once you install mamp
you might need to configure mamp to use the mamp mysql but most likley it will work out of the box. If you do run into any problems make sure you stop the instance of mysql you installed already before running mamp then trying to ran mamp again and it should be using the correct version.
I have a VB Windows forms application that uses a mysql database to keep track of everything within the application.. The problem that I know will occur is that most of the applications users will not have MYSQL let alone know how to install it properly... To install the application on the users systems I am using the Visual Studio Setup Installer to handle creation of the msi files.. What needs to happen first is the installer needs to check to see if MYSQL is installed on the host system and verify server name.. If true then import database, if not then install followed by import database... The importing is not the issue here... How do I make the installer install mysql with controlled parameters such as server name, etc, etc. Any ideas on this??? I have hammered google for the past 3 hours looking for bread crumbs on this but to no avail...
Usually existing packages (like the MySQL installer) are added as prerequisites. Visual Studio setup projects do not support custom prerequisite creation. However, this can be done by manually generating the required manifests.
You can find the manifests structure here: http://msdn.microsoft.com/en-us/library/ms229223(VS.80).aspx
These manifests can be generated automatically with the Bootstrapper Manifest Generator tool.
After generating the package manifests, you can add all these files (including the package) in a separate folder in the Visual Studio prerequisites folder, for example:
C:\Program Files\Microsoft SDKs\Windows\v7.0A\Bootstrapper\Packages\
You can then select the prerequisite in your setup project properties page.
Well... that's a good question. The first thing that pops up in my mind:
You could build the check in your application instead of the installer and warn the user about it. If needed, you could provide another installer to make sure everything is available (MySQL and the database itself).
I hope it helps you further.
Yours sincerely,
Roland
What is the difference between mysql-5.5.8.zip and mysql-5.5.8-win32.zip in the http://dev.mysql.com/downloads/mysql/ download page. I have a Win 2K environment, what binary should I use and why does it have a huge size difference between the above?
The smaller package does not contain test suite and embedded server.
Anyway, I suggest you use the MSI installer instead - installation and configuration are way more straightforward.
What is the best practice for creating an installer for a winform application.
The application is supposed to install the following without connecting to internet.
.Net Framework 3.5sp1
MySQL Server
My SQL Connector
Restore Mysql db
Update Config file with the MySQL uname/pwd.
I have all the msi files for installing the above mentioned items. But am wondering about the best practice to create the installer.
Thanks in advance,
Hi I came up with a similar situation. Firstly you should have .NET framework offline installer which can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=992cffcb-f8ce-41d9-8bd6-31f3e216285c. I assume you are using visual studio installer. There are couple of choices but I prefer to copy the offline .NET installer to the setup projects output directory and from requirements on target machine tab I set the install URL property of .NET framework the exact name of offline setup file. As described in the figure.
So the installer does not try to connect to a remote computer to download .NET framework and install it however I think it is more appropriate that it connects to a Microsoft server and installs it. Anyways the next step is to configure the MySQL server. MySQL is really generous for me since they support a fully documented noinstall files. You can find the document here: http://dev.mysql.com/doc/refman/5.5/en/windows-install-archive.html
Using a noinstall zip archive you can copy the dbengine core files to any folder on the clint machine. And change the configuration parameters of MySQL. You can name the MySQL service anything you want. Start the the service and create tables. You can do all of this stuff from custom actions tab of the setup project choosing the appropriate script files or you can write code for it. The beautiful thing is that your customer does not need to know that he/she is installing a database engine on the target machine. I hope this helps. Thanks.