I want to give my users the option of opening a tab into its own window rather than merely switching the current window’s display to that tab. I have lots of tabs in my app, and the user often wants to study a few of those over long periods of time. For example, the user may watch charts being updated over time via Push.
Currently I add an "Open Window" button to a tab's layout. This opens a new browser window with the current tab’s layout.
Is there any other way to do this? A context-menu on the tab itself? User holding down a keyboard modifier (Control key, Command key, Option/Alt key) while clicking the tab?
Actually, there is one trick:
tabSheet.setCloseHandler((tabsheet, tabContent) -> {/** make new window **/});
Of course it works if tabSheet is closeable.
So if anybody click close button then you could do your own logic - in this example open new window.
But it could be misleading. To handle this problem you could replace close caption from x to any other more meaningful sign.
For example, look at Valo TabSheet demo. If you look in HTML code, than you notice something like this:
<span class="v-tabsheet-caption-close" aria-hidden="true" aria-disabled="true">×</span>
I think you are able to change this x using for example JavaScript.
Related
So, I'm a little frustrated that someone in HR decided to force a .dotm template into my MS Word, which ultimately created a custom ribbon tab. This tab is annoying because it's not what I need, it's the first tab, and it's the default tab (instead of "Home"). They've also locked out the associated .dotm file from modification or moving.
Are there any other methods to remove (or at least move) the tab? I was thinking there might be VBA code to force some changes every time MS Word is opened. This would allow the tab, but then immediately move/remove it.
Ideas?
Thanks!
Brian
My web application is mimicing the UI of my desktop application, flow is as follows
Select Task in browser window
Change any Options and then start
Show Progress in same browser window, the progress bar goess back to server every 5 seconds checking progress.
When task has completed we show report in new tab
and go back to Select task Window,
this is done by running following Javascript in progress page
window.open('/start','_self'); window.open('/reporturl','_blank');
This works fine on my PC but when trying on Safari on OSX and on Android phone and iPad one of two things happen
The progress page becomes the start page but the report page is not opened in tab
The Progress page becomes the report page
My question is does opening window in new tab with _blank have all the problems of using popup windows. If so should I modify my prcoess so that at stage 3 it just displays report page, and then add a back button or navigable footer to the report to allow user to get back to start page ?
I can think of some options you could use instead of new tab.
Modal with Ajax
-- With jQuery it is posible to open modal
dialogs they can be populated with html (or other data) fetched with ajax (async). I am a big fan of these and use them all over my projects. Users will not be annoyed with pop-up warning messages, etc. Once the content is read (or whatever) the user can simply close the dialog. (If I had to make your app I would certainly implement this).
Besides the jQuery dialogs, other modal/dialog scripts are out there. Check out Bootstrap Modal if you like it modern.
Serve report as download
-- Depending on what the user can/will do with the report, it might be interesting to write the report page in a way that it sends back a .pdf file, or another type of file, as download. Loading the URL in a new tab will now always start a download. Triggering this from JS without user interaction might be a problem though (same as with pop-up / new tab). Adding a button to trigger the download on complete will solve this.
I know the question was about the use of tabs.. But try to avoid it. Browsers handle it all in their own way. And many users get confused when suddenly stuff is opening in tabs when they did not ask for it. In case of pop-ups, it is possible for users to turn them of or convert into opening a new tab from within the browser settings. If they have been fiddling with browser defaults, you'll have troubles of keeping the 'flow' of the app the same for all users (and cross browser).
I am trying to make a program that will click the button of another program. I have been informed that I need to use spy++ in order to get the ID of the button that I want to click, so I am using it right now. I have found the window which contains the button I wish to get the button ID from (there are 3 buttons in the window).
Where in spy++ can I find the specific buttons ID? I looked in the "window properties" of the window that contains the buttons and didn't find it. There are 3 buttons there so I am guessing I will find 3 button ID's somewhere but I haven't yet.
After you use Spy -> Find Window, select button you are interested in with Finder Tool:, make sure that Show Properties is selected, then press OK. On General tab you will see Control ID which is the value you are looking for.
Another way is to select Spy -> Windows and find you button in window hierarchy, then right select it and press properties, which will show you the same general tab as above.
Third alternative is to select parent (ie. dialog window) for your button (ie. it will be of Dialog class), and register for WM_COMMAND messages from it. Then after pressing it you button ID will be displayed as wID: XX in message window.
I have tested it on Calculator under win7 and win8, funny but spy++ from VS2005 didnt work for me on win7, while spy++ from VS2008 did work on win8. Also there is a 64 bit version of spy++.
You have to look in the properties of the button, not in the properties of the parent window (at low level buttons are in fact some special kind of windows).
For example HTML's href tag has a target attribute that can force the page to be opened in a new window. But conceptually is this a good idea? Should the content determine how the user should read it? Or should this be entirely up to the user (right click -> open in new window)?
I disagree. A link shouldn't be forced to open in a new window. If the user wants to open it in a new window then it is up to them.
Normally when we redirect to a link which is of the current site then it should/may open in the same window. But if the link redirects us to another sire then its better to open it in a new window so that the user will stick to our(current) site. There is no specific rule. It is mainly done as per client's requirement.
One drawback of in opening the link using right--> click is it makes the user do one extra click. In case your page has 5 links and the user wants to open them in new windows/tabs each time he/she has to do an extra click. This is just an example. It all depends what the user wants.....
Every solution I've seen so far for opening a new browser window uses the target property in to set it to "_blank". This is frustrating because in some browsers it only opens a new tab AND combine that with the auto-resizing behvaiour at http://www.facebook.com/connect/prompt_feed.php?&message=test, it basically mangles my browser whenever I try updating my status from my site.
How can I be sure to open a new window when a user clicks on a link?
Thanks!
Trindaz on Fedang
Popups are windows, they just have some features disables. You can make a popup act like a regular window by enabling these features. For example, if you open a popup with
window.open('url', 'name', 'width=500, height=500, status=1, toolbar=1, location=1, menubar=1, resizable=1');
the window will have a toolbar, a URL bar, a status bar, menus, and it will be resizable. It will the same as any other window.
Keep in mind, however, that many browsers block window.open() under some conditions, and some of them will open new tabs if you specify a lot of features. Some are weird about it too; Chrome, for example, uses scroll bars on popups by default, but if you specifically tell it to use scroll bars in a popup (using scrollbars=1), it will open in a tab instead.
So basically there is no way to be completely sure that your page will always open in a new window, because browsers all handle this stuff differently, users can change settings too. The code above is probably your best bet if you have to have a new window, but you might want to look into other options.
window.open(URL,name,specs,replace)
function newwindow()
{
myWindow=window.open('','','width=300,height=300');
myWindow.document.write("<p>This should open in a popup</p>");
myWindow.focus();
}
There is a legitimate reason for using Target=_blank that everybody has completely overlooked, and that is when a website is written as a BOOK with chapters/pages and the Table of Contents must remain intact without using the BACK button to reload the previous page (Table of Contents). This way all a surfer needs to do is close the Target Page when finished reading and they will be back to the Table of Contents.
Lucky for us that HTML5 has reinstated the Target="_blank" code, but unfortunately the "Block Popups" must be unchecked for it to work.