SSRS chart series labels: Field!axisfield.Value not current value - reporting-services

I am trying to dynamically format the labels on my SSRS charts based on the underlying value. I'm trying to do this in two scenarios, one to format dates as ordinals and another to choose the appropriate number of decimal places based on actual values present. However, when I use the expression editor with an expression something like this...
=IIF(MAX(ABS(Fields![axisfield].Value))<2, "0.0%","0%")
...the Fields![axisfield].Value is always returning the first value from the dataset, meaning, in this example, if the first value is less than two, the labels will be formatted with one decimal place, even if it is the only one less than two. (So the 'MAX' function is essentially irrelevant.)
That example is attempting to set the overall formatting based on the largest data point in the series, in this next one I'm trying to format each label separately to get Ordinal dates (i.e. 1st, 2nd, etc, and yes, this formula is incomplete: it doesn't need to be to illustrate the problem):
="dd"+IIF(DatePart("d", Fields!date.Value)=1,"\s\t"
,IIF(DatePart("d", Fields!date.Value)=2,"\n\d"
,IIF(DatePart("d", Fields!date.Value)=3,"\r\d"
,"\t\h")))
This will give 1st, 2st, 3st and so on, as the first row in the dataset is for the first.
So, my question is, how do I get round this and, in the first example get the true maximum, and in the second reference the actual value being formatted?
Thanks!


I've had the same issues with using custom functions for setting label visibility. (see my entry for this: How to Display Only 1 Value Label in SSRS 2012 Calculated/Derived Series? )
I believe the issue is that data and fields are bound to the underlying data series but are not bound and accessible within the label itself.
You should be able to set the formatting in the function for the series data itself (as in the 2nd example) and then just set data labels, which will use the underlying series field value. An example with your data might be something like the following, which returns the values with the format:
="dd"+IIF(DatePart("d", Fields!date.Value)=1,Format(Fields!date.Value, "\s\t")
,IIF(DatePart("d", Fields!date.Value)=2,Format(Fields!date.Value,"\n\d")
,IIF(DatePart("d", Fields!date.Value)=3,Format(Fields!date.Value, "\r\d")
,Format(Fields!date.Value,"\t\h"))))
In the first example, you can get the max value to referring to the Dataset, as opposed to the field. Your code would then be:
=IIF(ABS(MAX(Fields![axisfield].Value, "YourDatasetName"))<2, "0.0%","0%")
(I changed the order of operations for Abs and Max because you have to use an aggregate function when referring to the whole dataset. Only then can you refer to the specific value.)

Related

SSRS - Pie Chart - Multiple CollectedThreshold Properties

Hopefully this is simple. I know how to choose a value in the property section for a collected threshold to group all values under a certain percentage; however, I want to know if it's possible to set 2 values. If so, how do I go about doing that?
For instance, group all values with a value of 1-3% into a pie slice and group all values with a value of 3%-10% into another pie slice with the rest of the values each getting their own pie slice.

As a caveat, while the answer below isn't hard to set up it is a bit ugly and not great for maintainability or efficiency. I'd consider working on the query end to break out the categories.
You can set up the chart as a subreport and pass it the total as a hidden parameter (as you can't directly use aggregate functions in calculated fields or grouping expressions). Then use a category grouping expression similar to the following, changing field names as appropriate:
=IIF(Fields!Value.Value/Parameters!Total.Value<0.03,"Other (<3%)",IIF(Fields!Value.Value/Parameters!Total.Value<0.10,"Other (<10%)",Fields!Name.Value))
If your dataset doesn't rely on any parameters, you could also skip the subreport and just set up an extra dataset that grabs the sum total and have an internal parameter default to that value.

How to Display Only 1 Value Label in SSRS 2012 Calculated/Derived Series?

I have been using SSRS 2012 (Sql Server Reporting Services) with SQL Server Report Builder 3.0 (11.0.2100.60) to create Column charts that display columns for each day/week/month and display a trend line based on the mean across all days/weeks/months.
However, although the calculated series reflects only 1 value (the mean across all days/weeks/months), value labels appear on the chart displaying the single mean value for each day/week/month - that is, 3 days will result in 3 value labels for the same mean value.
Is there a way to force the series to show only 1 value for each mean trend line?
See below for sample chart.

The work-around I ultimately settled on involved creating duplicate series with value labels but invisible data points (obtained by setting Color to "No Color").
The values for this series are only assigned if the "dayofweek" field matches the first "dayofweek" field in the dataset, so only 1 data label will be displayed (namely, the first one).
For example, to show a single value for the average of the "physio" field for physiological alarms within my dataset ("techphysDayofWeek", I use the following formula):
=IIF(Fields!dayofweek.Value = First(Fields!dayofweek.Value,
"techphysDayofWeek"),Format(( Avg(Fields!physio.Value, "techphysDayofWeek") /
Parameters!StartDate.Value), "##.#"), "")
I wish SSRS provided an easier way, but after struggling with this seemingly simple issue for hours on end, I'm just glad to have any fix!

You can set the label text to be based on a formula. In that formula you could look at the value of the grouping field, and set the text to an empty string if it's not currently the group you want to have the label on.

Use a summary field in an expression in SSRS reports

I have the details of my report being summed up in a summary expression, all works fine. The fields are decimal values of hours worked. Thus, the summary value is also a decimal value. I'd like to access the summary value and convert it to hours / minutes. I've labeled the express as "WorkTimeSum", but can't seem to get a handle to it, however. Fields! obviously won't work since it is a summary expression. I was thinking ReportItems! should work, but to no avail. How can I use this expression field (in a summary row) in an expression in the same summary row?

If I've understood correctly, you're asking how to reference the textbox containing the total work hours value so that you can convert it to hours and minutes using an expression in a different textbox?
You can use either ReportItems! e.g.
=ReportItems!Textbox20.Value)
or ReportItems("") e.g.
=ReportItems("Textbox20").Value
to reference the value of another textbox. Be careful with the names as they are case sensitive.

You can use aggregate functions in any expression. For example, in any header rows you can use the following expression to determine the total hours value:
=Floor(Sum(Fields!hours.Value))
Sum(Fields!hours.Value) is just the total hours in whatever context, e.g. the group total if it's a group header row; you can use this expression as an input in any other expression you require.
It sounds like your issue wasn't the conversion itself, so hopefully this points you in the right direction. If you need further information please specify.

SSRS: Get values from a particular row of DataSet?

My dataset currently has 12 rows of data. Each representing data for a month. I would like to have variance of a column between to rows, the rows being last & last but one i.e., latest month and previous month's data.
It could have been simple if I were to work on tablix but thats not the case. I want those values for a textbox.
Any ideas on it anyone?

I hope you are using SSRS 2008R2:
R2 introduced the Lookup function that is perfect for this scenario.
=Lookup( Fields!ProductUID.Value ,Fields!ProductID.Value,Fields!Price.Value,"PriceDataSet")
The Lookup function above will evaluate the first parameter ("Fields!ProductUID.Value") in the current dataset, then look for a matching value in the field specified in the second parameter ("Fields!ProductID.Value") in the dataset specified in the fourth parameter. The value of the third parameter is then evaluated in that row of the dataset and returned.
A little convoluted, but very helpful.
In your case, you can use this in a textbox with a calculated a static number:
=Lookup(
Month(DateAdd(DateInterval.Month, -1, GetDate())),
Fields!MonthID.Value,
Fields!Name.Value,
"DataSet1")
This should calculate a number for last month, then look for a match in DataSet1.

In this example I have a tablix with Statecode and name as below
enter image description here
Suppose you want to display the name of state of CA, write an expression as -
=Lookup(
"CA" ,
Fields!StateCode.Value,
Fields!StateName.Value,
"ReportData"
)
This will return 'California' in the text box

I ran across this post while trying to solve a similar problem but with columns of double data type. Not sure why but SSRS did not want to return my first row using LOOKUP in combination with ROW_NUMBER in SQL(If someone can solve that all the better). I ended up using a SUM(IIF) instead. Hopefully, this is useful for someone else.
=Sum(IIF(Fields!RowNum.Value=1,CDBL(Fields!MyNumericColumn.Value),CDBL(0)))
Note: If SSRS complains about data types, just cast both parts of the IIF to the desired data type.

How do i represent an unknown number of columns in SSRS?

I'm working on a rather complex report in Sql Server Reporting Services. My SP returns a dynamic number of columns each of which are dynamically named.
Basically think of a time keeping application. Each column that is dynamic represents a time bucket that time was charged to for that team. If no time was charged to that bucket for the period of time the report covers it doesn't show. Each bucket has its own identifier which i need to be the column headers.
I have an SP that returns this all. It does it by doing a bit of dynamic SQL with an exec statement (ugly i know but I'm on SQL 2000 so a PIVOT option wouldn't work)
I can have an indefinite number of buckets and any or all might show.
I found this - http://www.codeproject.com/KB/reporting-services/DynamicReport.aspx - which is helpful but in the example he has a finite number of columns and he just hides or shows them according to which ones have values. In my case i have a variable number of columns so somehow i need the report to add columns.
Any thoughts?

As long as you know a maximum number of columns, it's possible to do this after a fashion.
First, name the columns with a result from your query, so you can either pass it in to the query or derive it there. Second, just build out the report as if it had the maximum number of columns, and hide them if they are empty.
For example, I had to build a report that would report monthly sales numbers for up to a year, but the months weren't necessarily starting in January. I passed back the month name in one column, followed by the numbers for my report. On the .rdl, I built out 12 sets of columns, one for each possible month, and just used an expression to hide the column if it were empty. The result is the report appears to expand out to the number of columns needed.
Of course, it's not really dynamic in the sense that it can expand out as far as you need without knowing the upper bound.

This can be done. I did this and it works fine.
You don't have to know the maximum number of columns or show and hide columns in my approach. Use a matrix and modify your sp to return dynamic data to the structure mentioned in this blog post http://sonalimendis.blogspot.com/2011/07/dynamic-column-rdls.html

Build 2 related Datasets, first one for the report content, and the second one for the list of its column labels.
The Dataset of the report content must have a fixed number of columns and name. You can allocate some maximum number of columns.
In this example I have the first 2 columns as fixed, or always visible, and a maximum of 4 columns to be displayed by choice through a multivalued parameter, or depends on the query conditions. And as usual, we may have a total as well. So, it may look like this:
Fixed01, Fixed02, Dyna01, Dyna02, Dyna03, Dyna04, Total
The second Dataset with its values will look like this:
Name Label
---- -----
Dyna01 Label01
Dyna02 Label02
Dyna03 Label03
I have omitted the 4th Label to demonstrate that not all columns are being used by a certain query condition. Remember that both Datasets are meant to be related to the same query.
Now create a parameter named, say, #columns; populate its Available Values and Default Values with the second Dataset.
For each of those 4 dynamic columns, set the column visibility with the following expression:
=IIf(InStr(join(Parameters!columns.Value,","),"Dyna01"),false,true)
And for each of their column header Text Boxes, use the following expression:
=Lookup("Dyna01", Fields!Name.Value, Fields!Label.Value, "dsColumns")
As for the Total, here is the expression for its visibility:
= IIf(InStr(join(Parameters!columns.Value, ","), "Dyna01"), false, true)
AndAlso IIf(InStr(join(Parameters!columns.Value, ","), "Dyna02"), false, true)
AndAlso IIf(InStr(join(Parameters!columns.Value, ","), "Dyna03"), false, true)
AndAlso IIf(InStr(join(Parameters!columns.Value, ","), "Dyna04"), false, true)
And here is for its values:
= IIf(InStr(join(Parameters!columns.Value, ","), "Dyna01"), Fields!C01.Value, 0)
+ IIf(InStr(join(Parameters!columns.Value, ","), "Dyna02"), Fields!C02.Value, 0)
+ IIf(InStr(join(Parameters!columns.Value, ","), "Dyna03"), Fields!C03.Value, 0)
+ IIf(InStr(join(Parameters!columns.Value, ","), "Dyna04"), Fields!C04.Value, 0)
That's all, hope it helps.
Bonus, that second Dataset, dsColumns, can also hold other column attributes, such as: color, width, fonts, etc.

I think the best way to do it is add all the columns in your table and edit the visibility property of it with the help of arguments that you get from your SP..this will solve the purpose of dynamic column but when viewing the report you will get a lot of white-space which you can solve with SSRS - Keep a table the same width when hiding columns dynamically? and your report will be ready

I've had the need to do this in the past and the conclusion I came to is "you can't", however I'm not positive about that. If you find a solution, I'd love to hear about it.
An issue that comes to mind is that you need to define the report using the names of the columns that you're going to get back from the stored proc, and if you don't know those names or how many there are, how can you define the report?
The only idea I had on how to do this is to dynamically create the report definition (.rdl file) via C#, but at the time, I wasn't able to find an MS API for doing so, and I doubt one exists now. I found an open source one, but I didn't pursue that route.