I have SQL query with LEFT JOIN:
SELECT COUNT(stn.stocksId) AS count_stocks
FROM MedicalFacilities AS a
LEFT JOIN stocks stn ON
(stn.stocksIdMF = ( SELECT b.MedicalFacilitiesIdUser
FROM medicalfacilities AS b
WHERE b.MedicalFacilitiesIdUser = a.MedicalFacilitiesIdUser
ORDER BY stn.stocksId DESC LIMIT 1)
AND stn.stocksEndDate >= UNIX_TIMESTAMP() AND stn.stocksStartDate <= UNIX_TIMESTAMP())
These query I want to select one row from table stocks by conditions and with field equal value a.MedicalFacilitiesIdUser.
I get always count_stocks = 0 in result. But I need to get 1
The count(...) aggregate doesn't count null, so its argument matters:
COUNT(stn.stocksId)
Since stn is your right hand table, this will not count anything if the left join misses. You could use:
COUNT(*)
which counts every row, even if all its columns are null. Or a column from the left hand table (a) that is never null:
COUNT(a.ID)
Your subquery in the on looks very strange to me:
on stn.stocksIdMF = ( SELECT b.MedicalFacilitiesIdUser
FROM medicalfacilities AS b
WHERE b.MedicalFacilitiesIdUser = a.MedicalFacilitiesIdUser
ORDER BY stn.stocksId DESC LIMIT 1)
This is comparing MedicalFacilitiesIdUser to stocksIdMF. Admittedly, you have no sample data or data layouts, but the naming of the columns suggests that these are not the same thing. Perhaps you intend:
on stn.stocksIdMF = ( SELECT b.stocksId
-----------------------------^
FROM medicalfacilities AS b
WHERE b.MedicalFacilitiesIdUser = a.MedicalFacilitiesIdUser
ORDER BY b.stocksId DESC
LIMIT 1)
Also, ordering by stn.stocksid wouldn't do anything useful, because that would be coming from outside the subquery.
Your subquery seems redundant and main query is hard to read as much of the join statements could be placed in where clause. Additionally, original query might have a performance issue.
Recall WHERE is an implicit join and JOIN is an explicit join. Query optimizers
make no distinction between the two if they use same expressions but readability and maintainability is another thing to acknowledge.
Consider the revised version (notice I added a GROUP BY):
SELECT COUNT(stn.stocksId) AS count_stocks
FROM MedicalFacilities AS a
LEFT JOIN stocks stn ON stn.stocksIdMF = a.MedicalFacilitiesIdUser
WHERE stn.stocksEndDate >= UNIX_TIMESTAMP()
AND stn.stocksStartDate <= UNIX_TIMESTAMP()
GROUP BY stn.stocksId
ORDER BY stn.stocksId DESC
LIMIT 1
Related
How can I turn this subquery in a JOIN?
I read that subqueries are slower than JOINs.
SELECT
reklamation.id,
reklamation.titel,
(
SELECT reklamation_status.status
FROM reklamation_status
WHERE reklamation_status.id_reklamation = reklamation.id
ORDER BY reklamation_status.id DESC
LIMIT 1
) as status
FROM reklamation
WHERE reklamation.aktiv=1
This should do it:
SELECT r.id, r.titel, MAX(s.id) as status
FROM reklamation r
LEFT JOIN reklamation_status s ON s.id_reklamation = r.id
WHERE r.aktiv = 1
GROUP BY r.id, r.titel
The key point here is to use aggregation to manage the cardinality between reklamation and reklamation_status. In your original code, the inline subquery uses ORDER BY reklamation_status.id DESC LIMIT 1 to return the highest id in reklamation_status that corresponds to the current reklamation. Without aggregation, we would probably get multiple records in the resultset for each reklamation (one for each corresponding reklamation_status).
Another thing is to consider is the type of the JOIN. INNER JOIN would filter out records of reklamations that do not have a reklamation_status: the original query with the inline subquery does not behave like that, so I chose LEFT JOIN. If you can guarantee that every reklamation has at least one child in reklamation_status, you can safely switch back to INNER JOIN (which might perform more efficiently).
PS:
I read that subqueries are slower than JOINs.
This is not a universal truth. It depends on many factors and cannot be told without seeing your exact use case.
Using JOIN query can be rewritten to:
SELECT reklamation.id, reklamation.titel, reklamation_status.status
FROM reklamation
JOIN reklamation_status ON reklamation_status.id_reklamation = reklamation.id
WHERE reklamation.aktiv=1
What you read is incorrect. Subqueries can be slower, faster, or the same as joins. I would write the query as:
SELECT r.id, r.titel,
(SELECT rs.status
FROM reklamation_status rs
WHERE rs.id_reklamation = r.id
ORDER BY rs.id DESC
LIMIT 1
) as status
FROM reklamation r
WHERE r.aktiv = 1;
For performance, you want an index on reklamation_status(id_reklamation, id, status).
By the way, this is a case where the subquery is probably the fastest method for expressing this query. If you attempt a JOIN, then you need some sort of aggregation to get the most recent status. That can be expensive.
What I am trying to do it with below code, getting all keywords with their positions via LEFT JOIN, it works fine but it shows the first position of each keyword, but I want to show the last position that recorded (by date).
SELECT keyword.id, keyword.title, keyword.date, rank.position FROM keyword
LEFT JOIN rank
ON rank.wordid = keyword.id
GROUP BY keyword.id
ORDER BY keyword.date DESC
How can I do this? Should I use subquery or what? Is there any way to do this without a subquery?
SAMPLE DATA
What I want:
Get 17 instead of 13, I mean last record of position.
Do not use group by for this! You want to filter, so use a where clause. In this case, using a correlated subquery works well:
SELECT k.id, k.title, k.date, r.position
FROM keyword k LEFT JOIN
rank r
ON r.wordid = k.id AND
r.date = (SELECT MAX(r2.date)
FROM rank r2
WHERE r2.wordid = k.id
)
ORDER BY k.date DESC
You can use below query
SELECT keyword.id, keyword.title, keyword.date, rankNew.position FROM keyword LEFT JOIN (
SELECT rank.wordid, rank.position FROM rank ORDER BY rank.id DESC LIMIT 0, 1) AS rankNew ON (rankNew.wordid = keyword.id);
You can get more reference from Retrieving the last record in each group - MySQL
I have couple tables joined in MySQL - one has many others.
And try to select items from one, ordered by min values from another table.
Without grouping in seems to be like this:
Code:
select `catalog_products`.id
, `catalog_products`.alias
, `tmpKits`.`minPrice`
from `catalog_products`
left join `product_kits` on `product_kits`.`product_id` = `catalog_products`.`id`
left join (
SELECT MIN(new_price) AS minPrice, id FROM product_kits GROUP BY id
) AS tmpKits on `tmpKits`.`id` = `product_kits`.`id`
where `category_id` in ('62')
order by product_kits.new_price ASC
Result:
But when I add group by, I get this:
Code:
select `catalog_products`.id
, `catalog_products`.alias
, `tmpKits`.`minPrice`
from `catalog_products`
left join `product_kits` on `product_kits`.`product_id` = `catalog_products`.`id`
left join (
SELECT MIN(new_price) AS minPrice, id FROM product_kits GROUP BY id
) AS tmpKits on `tmpKits`.`id` = `product_kits`.`id`
where `category_id` in ('62')
group by `catalog_products`.`id`
order by product_kits.new_price ASC
Result:
And this is incorrect sorting!
Somehow when I group this results, I get id 280 before 281!
But I need to get:
281|1600.00
280|2340.00
So, grouping breaks existing ordering!
For one, when you apply the GROUP BY to only one column, there is no guarantee that the values in the other columns will be consistently correct. Unfortunately, MySQL allows this type of SELECT/GROUPing to happen other products don't. Two, the syntax of using an ORDER BY in a subquery while allowed in MySQL is not allowed in other database products including SQL Server. You should use a solution that will return the proper result each time it is executed.
So the query will be:
For one, when you apply the GROUP BY to only one column, there is no guarantee that the values in the other columns will be consistently correct. Unfortunately, MySQL allows this type of SELECT/GROUPing to happen other products don't. Two, the syntax of using an ORDER BY in a subquery while allowed in MySQL is not allowed in other database products including SQL Server. You should use a solution that will return the proper result each time it is executed.
So the query will be:
select CP.`id`, CP.`alias`, TK.`minPrice`
from catalog_products CP
left join `product_kits` PK on PK.`product_id` = CP.`id`
left join (
SELECT MIN(`new_price`) AS "minPrice", `id` FROM product_kits GROUP BY `id`
) AS TK on TK.`id` = PK.`id`
where CP.`category_id` IN ('62')
order by PK.`new_price` ASC
group by CP.`id`
The thing is that group by does not recognize order by in MySQL.
Actually, what I was doing is really bad practice.
In this case you should use distinct and by catalog_products.*
In my opinion, group by is really useful when you need group result of agregated functions.
Otherwise you should not use it to get unique values.
I have a mysql query and it works fine when i use where clause, but when i donot use
where clause it gone and never gives the output and finally timeout.
Actually i have used Explain command to check the performance of the query and in both cases the Explain gives the same number of rows used in joining.
I have attached the image of output got with Explain command.
Below is the query.
I couldn't figure whats the problem here.
Any help is highly appreciated.
Thanks.
SELECT
MCI.CLIENT_ID AS CLIENT_ID, MCI.NAME AS CLIENT_NAME, MCI.PRIMARY_CONTACT AS CLIENT_PRIMARY_CONTACT,
MCI.ADDED_BY AS SP_ID, CONCAT(MUD_SP.FIRST_NAME, ' ', MUD_SP.LAST_NAME) AS SP_NAME,
MCI.FK_PROSPECT_ID AS PROSPECT_ID, MCI.DATE_ADDED AS ADDED_ON,
(SELECT GROUP_CONCAT(LT.TAG_TEXT SEPARATOR ', ')
FROM LK_TAG LT
INNER JOIN M_OBJECT_TAG_MAPPING MOTM
ON LT.PK_ID = MOTM.FK_TAG_ID
WHERE MOTM.FK_OBJECT_ID = MCI.FK_PROSPECT_ID
AND MOTM.OBJECT_TYPE = 1
AND MOTM.IS_ACTIVE = 1
) AS TAGS,
IFNULL(SUM(GET_DIGITS(MMR.RCP_AMOUNT)), 0) AS REVENUE_SO_FAR,
IFNULL(SUM(GET_DIGITS(MMR.RCP_RUPEES)), 0) AS REVENUE_INR,
COUNT(DISTINCT PMI_MONTHLY.PROJECT_ID) AS MONTHLY,
COUNT(DISTINCT PMI_FIXED.PROJECT_ID) AS FIXED,
COUNT(DISTINCT PMI_HOURLY.PROJECT_ID) AS HOURLY,
COUNT(DISTINCT PMI_ANNUAL.PROJECT_ID) AS ANNUAL,
COUNT(DISTINCT PMI_CURRENTLY_RUNNING.PROJECT_ID) AS CURRENTLY_RUNNING_PROJECTS,
COUNT(DISTINCT PMI_YET_TO_START.PROJECT_ID) AS YET_TO_START_PROJECTS,
COUNT(DISTINCT PMI_TECH_SALES_CLOSED.PROJECT_ID) AS TECH_SALES_CLOSED_PROJECTS
FROM
M_CLIENT_INFO MCI
INNER JOIN M_USER_DETAILS MUD_SP
ON MCI.ADDED_BY = MUD_SP.PK_ID
LEFT OUTER JOIN M_MONTH_RECEIPT MMR
ON MMR.CLIENT_ID = MCI.CLIENT_ID
LEFT OUTER JOIN M_PROJECT_INFO PMI_FIXED
ON PMI_FIXED.CLIENT_ID = MCI.CLIENT_ID AND PMI_FIXED.PROJECT_TYPE = 1
LEFT OUTER JOIN M_PROJECT_INFO PMI_MONTHLY
ON PMI_MONTHLY.CLIENT_ID = MCI.CLIENT_ID AND PMI_MONTHLY.PROJECT_TYPE = 2
LEFT OUTER JOIN M_PROJECT_INFO PMI_HOURLY
ON PMI_HOURLY.CLIENT_ID = MCI.CLIENT_ID AND PMI_HOURLY.PROJECT_TYPE = 3
LEFT OUTER JOIN M_PROJECT_INFO PMI_ANNUAL
ON PMI_ANNUAL.CLIENT_ID = MCI.CLIENT_ID AND PMI_ANNUAL.PROJECT_TYPE = 4
LEFT OUTER JOIN M_PROJECT_INFO PMI_CURRENTLY_RUNNING
ON PMI_CURRENTLY_RUNNING.CLIENT_ID = MCI.CLIENT_ID AND PMI_CURRENTLY_RUNNING.STATUS = 4
LEFT OUTER JOIN M_PROJECT_INFO PMI_YET_TO_START
ON PMI_YET_TO_START.CLIENT_ID = MCI.CLIENT_ID AND PMI_YET_TO_START.STATUS < 4
LEFT OUTER JOIN M_PROJECT_INFO PMI_TECH_SALES_CLOSED
ON PMI_TECH_SALES_CLOSED.CLIENT_ID = MCI.CLIENT_ID AND PMI_TECH_SALES_CLOSED.STATUS > 4
WHERE YEAR(MCI.DATE_ADDED) = '2012'
GROUP BY MCI.CLIENT_ID ORDER BY CLIENT_NAME ASC
Yes, as many people have said, the key is that when you have the where clause, mysql engine filters the table M_CLIENT_INFO --probably drammatically--.
A similar result as removing the where clause is to to add this where clause:
where 1 = 1
You will see that the performance is degraded also because mysql will try to get all the data.
Remove the where clause and all columns from select and add a count to see how many records you get. If it is reasonable, say up to 10k, then do the following,
put back the select columns related to M_CLIENT_INFO
do not include the nested one "TAGS"
remove all your joins
run your query without where clause and gradually include the joins
this way you'll find out when the timeout is caused.
I would try the following. First, MySQL has a keyword "STRAIGHT_JOIN" which tells the optimizer to do the query in the table order you've specified. Since all you left-joins are child-related (like a lookup table), you don't want MySQL to try and interpret one of those as a primary basis of the query.
SELECT STRAIGHT_JOIN ... rest of query.
Next, your M_PROJECT_INFO table, I dont know how many columns of data are out there, but you appear to be concentrating on just a few columns on your DISTINCT aggregates. I would make sure you have a covering index on these elements to help the query via an index on
( Client_ID, Project_Type, Status, Project_ID )
This way the engine can apply the criteria and get the distinct all out of the index instead of having to go back to the raw data pages for the query.
Third, your M_CLIENT_INFO table. Ensure that has an index on both your criteria, group by AND your Order By, and change your order by from the aliased "CLIENT_NAME" to the actual column of the SQL table so it matches the index
( Date_Added, Client_ID, Name )
I have "name" in ticks as it is also a reserved word and helps clarify the column, not the keyword.
Next, the WHERE clause. Whenever you apply a function to an indexed column name, it doesn't work the greatest, especially on date/time fields... You might want to change your where clause to
WHERE MCI.Date_Added between '2012-01-01' and '2012-12-31 23:59:59'
so the BETWEEN range is showing the entire year and the index can better be utilized.
Finally, if the above do not help, I would consider splitting your query some. The GROUP_CONCACT inline select for the TAGS might be a bit of a killer for you. You might want to have all the distinct elements first for the grouping per client, THEN get those details.... Something like
select
PQ.*,
group_concat(...) tags
from
( the entire primary part of the query ) as PQ
Left join yourGroupConcatTableBasis on key columns
This query is processing and running but it is completely ignoring the NOT IN section
SELECT * FROM `offers` as `o` WHERE `o`.country_iso = '$country_iso' AND `o`.`id`
not in (select distinct(offer_id) from aff_disabled_offers
where offer_id = 'o.id' and user_id = '1') ORDER by rand() LIMIT 7
Maybe your "not in" query returns nothing.
Shouldn't the
where offer_id='o.id'
Be
where offer_id=o.id
?
guido has the answer... it looks like you meant to create a correlated subquery. 'o.id' is being seen as a literal.
SOME CAUTIONS:
You usually want some sort of guarantee that the subquery in the NOT IN predicate does NOT return a NULL value. If you don't have that guarantee enforced from the database, adding a WHERE/HAVING return_expr IS NOT NULL in the subquery is sufficient to give you that guarantee.
That correlated subquery is going to eat your lunch, performance wise, on large sets. As will that ORDER BY rand().
Generally, an anti-join pattern turns out to be much more efficient on large sets:
SELECT o.*
FROM offers o
LEFT
JOIN aff_disabled_offers d
ON d.user_id = '1'
AND d.offer_id = o.id
WHERE d.offer_id IS NULL
AND o.country_iso = '$country_iso'
ORDER BY rand()
LIMIT 7