I have two dates, say start_date is 20141215 and end_date = 20150115. I would like to use SQL DATEDIFF to only count the dates within the year 2015 which I will specify in the query. Here is the current SQL I have written:
SELECT COUNT(leave_id),
sum(case when leave_status = 1 then 1 else 0 end) pending,
sum(case when leave_status = 2 then 1 else 0 end) declined,
sum(case when leave_status = 3 then 1 else 0 end) approved,
sum(case when leave_status = 4 then 1 else 0 end) rostered,
SUM(DATEDIFF(end_date, start_date)+1) as datetotals
FROM employee_leave WHERE
((YEAR(start_date) = :year) OR (YEAR(end_date) = :year))
AND employee_id = :emp_id
Thanks
You need to fix datediff() to only consider dates during the year. I think this does what you want:
SELECT COUNT(leave_id),
sum(case when leave_status = 1 then 1 else 0 end) pending,
sum(case when leave_status = 2 then 1 else 0 end) declined,
sum(case when leave_status = 3 then 1 else 0 end) approved,
sum(case when leave_status = 4 then 1 else 0 end) rostered,
SUM(DATEDIFF(least(end_date, date(concat_ws('-', :year, 12, 31))),
greatest(start_date, date(concat_ws('-', :year, 1, 1)))
) + 1) as datetotals
FROM employee_leave
WHERE ((YEAR(start_date) = :year) OR (YEAR(end_date) = :year)) AND
employee_id = :emp_id
Make it a AND condition rather like
WHERE
((YEAR(start_date) = :year) AND (YEAR(end_date) = :year))
Related
Given SQL: Is there a way to bring in the total of the result set?
SELECT
SUM(CASE
WHEN status = 3 THEN 1
ELSE 0
END) AS Open,
SUM(CASE
WHEN status = 4 THEN 1
ELSE 0
END) AS Close
FROM
Table1
WHERE
id = 2;
Result:
Open,Close
5,5
Desired Result:
Open,Close,Total
5,5,10
just add another case statement
SELECT
SUM(CASE
WHEN status = 3 THEN 1
ELSE 0
END) AS Open,
SUM(CASE
WHEN status = 4 THEN 1
ELSE 0
END) AS Close
SUM(CASE
WHEN status IN (3, 4) THEN 1
ELSE 0
END) AS Total
FROM
Table1
WHERE
id = 2;
You can use a CTE:
WITH sumCase AS (
SELECT
SUM(CASE
WHEN status = 3 THEN 1
ELSE 0
END) AS Open,
SUM(CASE
WHEN status = 4 THEN 1
ELSE 0
END) AS Close
FROM
Table1
WHERE
id = 2;)
SELECT Open,Close, Open + Close AS Total FROM Table1;
http://www.mysqltutorial.org/mysql-cte/
using sub-query
select open,close,open+close as total from
(
SELECT
SUM(CASE WHEN status = 3 THEN 1
ELSE 0
END ) AS Open,
SUM(CASE WHEN status = 4 THEN 1
ELSE 0
END) AS Close
FROM
Table1
WHERE id = 2 ) as T
I have two different query in HP ALM, but i want to merge and get it into one. I am not that good in SQL query so I am facing hard time in merging the query.
Query 1: Getting the execution Count for the tester
Select
TESTCYCL.TC_ACTUAL_TESTER as 'Tester',
sum(case when TC_Status In('Blocked','Passed','Failed','Not Completed') then 1 else 0 end) as 'Total',
sum(case when TC_Status = 'Passed' then 1 else 0 end) as 'Pass',
sum(case when TC_Status = 'Failed' then 1 else 0 end) as 'Fail',
sum(case when TC_Status = 'Blocked' then 1 else 0 end) as 'Blocked',
sum(case when TC_Status In('Not Completed','Defferred','N/A') then 1 else 0 end) as 'Others'
From TESTCYCL
Where
TESTCYCL.TC_EXEC_DATE = CAST(CURRENT_TIMESTAMP AS DATE)
And
TESTCYCL.TC_ACTUAL_TESTER in ('Username1')
Group by TC_ACTUAL_TESTER
Query 2: Getting the Defect raise by the tester
SELECT
BG_DETECTED_BY,
Sum(case when BG_Status Not in ('Closed','Defect Resolved','Rejected')then 1 else 0 end) as 'Defect Raised'
FROM BUG
Where BUG.BG_DETECTED_BY in ('username1')
AND BUG.BG_DETECTION_DATE = CAST(CURRENT_TIMESTAMP AS DATE)
Group by BG_DETECTED_BY
I have tried inner join/ Left Join but the count of the defect raised by the user is not matching
Query3 : That i have tried:
Select
TESTCYCL.TC_ACTUAL_TESTER as 'Tester',
sum(case when TC_Status In('Blocked','Passed','Failed','Not Completed') then 1 else 0 end) as 'Total',
sum(case when TC_Status = 'Passed' then 1 else 0 end) as 'Pass',
sum(case when TC_Status = 'Failed' then 1 else 0 end) as 'Fail',
sum(case when TC_Status = 'Blocked' then 1 else 0 end) as 'Blocked',
sum(case when TC_Status In('Not Completed','Defferred','N/A') then 1 else 0 end) as 'Others',
Sum(case when BG_Status Not in ('Closed','Defect Resolved','Rejected')then 1 else 0 end) as 'Defect Raised'
From TESTCYCL
Left Join BUG
on TESTCYCL.TC_ACTUAL_TESTER = BUG.BG_DETECTED_BY
AND BUG.BG_DETECTION_DATE = CAST(CURRENT_TIMESTAMP AS DATE)
Where TESTCYCL.TC_EXEC_DATE = CAST(CURRENT_TIMESTAMP AS DATE)
And TESTCYCL.TC_ACTUAL_TESTER in ('username1')
Group by TC_ACTUAL_TESTER
Out is mentioned as below:
Expected Output:
Tester Total Execution Passed Failed ... Defect Raised
A 5 3 2 10
Actual Output:
Tester Total Execution Passed Failed ... Defect Raised
A 56 3 2 45
The problem is you are doing the COUNT() over the product cartesian. instead of concatenating the result.
Right now you are doing
COUNT(A*B) instead of COUNT(A) || COUNT(B)
general example, if you have two queries
SELECT * FROM A (ex: 10 rows)
SELECT * FROM B (ex: 10 rows)
What you need is:
SELECT temp1.*, temp2.*
FROM (SELECT * FROM A) as temp1
JOIN (SELECT * FROM B) as temp2
ON temp1.ID = temp2.ID
SELECT PatchPhase.PhaseName, MAX(PatchPhase.Sequence) AS seq,
PatchState.Application, PatchState.Objectname, PatchState.Jobname,
PatchState.Streamname, COUNT(*) AS Total,
PatchState.Jobdescription,
PatchState.Status, PatchState.Timestamp
FROM PatchState
INNER JOIN PatchPhase ON PatchState.Phase = PatchPhase.PhaseTech
WHERE (PatchPhase.PhaseName IN (#Phase))
AND (PatchState.Application IN (#Application)) AND (PatchState.Timestamp >= #StartDate)
AND (PatchState.Timestamp <= #EndDate)
GROUP BY PatchPhase.PhaseName, PatchState.Application, PatchState.Objectname,
PatchState.Jobname, PatchState.Streamname, PatchState.Jobdescription, PatchState.Status,
PatchState.Timestamp
ORDER BY PatchState.Application
I am working on matrix and I have column group of status which contains 3 columns (planned, running,completed). I want to sum planned+completed and divide by total column.
Total column is outside the column group.
I do find some answers but I did not get how should I use in my code
can someone please help?
Try using this to aggregate, and then use a table instead of a matrix. You will not need a column group now. As I cannot run the sql I can't promise it is perfect but perhaps you could have a little play with it if not. It should offer a guide if nothing else.
SELECT
PatchPhase.PhaseName,
MAX(PatchPhase.Sequence) AS seq,
PatchState.Application,
PatchState.Objectname,
PatchState.Jobname,
PatchState.Streamname,
PatchState.Jobdescription,
SUM(case when PatchState.Status = 'Planned' then 1 else 0 end) as 'Planned',
SUM(case when PatchState.Status = 'Running' then 1 else 0 end) as 'Running',
SUM(case when PatchState.Status = 'Completed' then 1 else 0 end) as 'Completed',
(SUM(case when PatchState.Status = 'Planned' then 1 else 0 end) + SUM(case when PatchState.Status = 'Running' then 1 else 0 end)) /
(SUM(case when PatchState.Status = 'Planned' then 1 else 0 end) + SUM(case when PatchState.Status = 'Running' then 1 else 0 end) + SUM(case when PatchState.Status = 'Completed' then 1 else 0 end)) as totalPercentage
PatchState.Timestamp
FROM
PatchState
INNER JOIN PatchPhase
ON PatchState.Phase = PatchPhase.PhaseTech
WHERE
(PatchPhase.PhaseName IN (#Phase))
AND (PatchState.Application IN (#Application))
AND (PatchState.Timestamp >= #StartDate)
AND (PatchState.Timestamp <= #EndDate)
GROUP BY
PatchPhase.PhaseName,
PatchState.Application,
PatchState.Objectname,
PatchState.Jobname,
PatchState.Streamname,
PatchState.Jobdescription,
PatchState.Status,
PatchState.Timestamp
ORDER BY
PatchState.Application
You can get a value displayed in a text box from expression =Reportitems!Textbox133.Value
instead of textbox133 in the above expression you have to give the textbox name of the textbox from which you want the value. In your case the total column
This MySQL query gives me this error 'Unknown column 'winnings' in 'field list'
SELECT
o.user_id,
sum(case when o.result = 1 or o.result=2 or o.result = 0 then 1 else 0 end) as tahmins_no,
sum(case when o.result = 1 then 1 else 0 end) as winnings,
sum(case when o.result = 2 then 1 else 0 end) as loses,
sum(case when winnings = 10 then 0.5 else 0 end) as counter
FROM `odds_tahminler` o
I know that winnings is the value of the sum() aggregation function, But is there any way to check the winnings value within the query?
You can't use an aggregated column inside the select. However you can use a subquery to obtain the counter value after all the aggregated columns have been computed.
How is the counter value calculated? I assumed that the counter should be (winnings - 10) / 2 if there's at least 10 winnings and 0 otherwise. In that case you can obtain it with this query
SELECT O.*,
GREATEST( (O.winnings - 10) / 2, 0) as counter
FROM
(
SELECT u.username,
o.user_id,
sum(case when o.result = 1 or o.result=2 or o.result = 0 then 1 else 0 end) as tahmins_no,
sum(case when o.result = 1 then 1 else 0 end) as winnings,
sum(case when o.result = 2 then 1 else 0 end) as loses
FROM `odds_tahminler` o
) as O
you can try:
SELECT
o.user_id,
sum(case when o.result = 1 or o.result=2 or o.result = 0 then 1 else 0 end) as tahmins_no,
sum(case when o.result = 1 then 1 else 0 end) as winnings,
sum(case when o.result = 2 then 1 else 0 end) as loses,
sum(case when winnings = 10 then 0.5 else 0 end) as counter
FROM `odds_tahminler` o
GROUP BY o.user_id
HAVING counter>2
I have a query results like this.
status count
-----------------
OTHER 5
ATTENDED 74
I want result like this:
OTHERS ATTENDED
5 74
Note this is already a grouped result. So I am thinking, Group_Concat might not work.
Query:
SELECT CASE Rstat WHEN 1 THEN 'ATTENDED'
WHEN 2 THEN 'TENTATIVE'
WHEN 3 THEN 'REJECTED'
WHEN 4 THEN 'OUTSTANDING'
WHEN 6 THEN 'ACCEPTED' ELSE 'OTHER' END AS 'status',
COUNT(Rstat) AS 'count'
FROM `eStatus`
GROUP BY RSTAT
Any other ideas?
SELECT SUM(CASE WHEN Rstat = 1 THEN 1 ELSE 0 END) AS ATTENDED,
SUM(CASE WHEN Rstat = 2 THEN 1 ELSE 0 END) AS TENTATIVE,
SUM(CASE WHEN Rstat = 3 THEN 1 ELSE 0 END) AS REJECTED,
SUM(CASE WHEN Rstat = 4 THEN 1 ELSE 0 END) AS OUTSTANDING,
SUM(CASE WHEN Rstat = 6 THEN 1 ELSE 0 END) AS ACCEPTED,
SUM(CASE WHEN Rstat NOT IN (1,2,3,4,6) THEN 1 ELSE 0 END) AS OTHER
FROM eStatus