I have a project which has japanese characters in it. When I run the project which is already on the server (the live version) japanese characters are displayed. However, the same files with no changes in the code, if I run on localhost then japanese characters are displaying something like this "レストラン".
all files includes . and i'm using google chrome.
what should I do to make it support japanese characters?
any help would be appreciated.
Add following:
<meta charset="Shift-JIS"/>
to your file if you use HTML5, or
<meta http-equiv="Content-Type" content="text/html; charset=Shift-JIS" />
if you use HTML 4.01.
The reason why it works over the webserver is because it transmits HTTP headers with correct encoding. On your local copy of .html, there are no such headers, so the browser checks the <meta/> tags (which are missing), and if it fails to find these, it guesses encoding, which in this case is UTF8. (If you use webserver in localhost too, it might be misconfigured. In any case, it's a good practice to always include charset information.)
#AshishAcharya I'm pretty sure OP uses Shift-JIS rather than UTF8. The page is rendered as UTF8 though.
Related
So I've been making a website and tested it on XAMPP. It showed the vowels and emojis I used on the website correctly.
But when I tried to put it on my web server I ordered at OVH they were formatting incorrectly, probably because the web server was configured with another character encoding.
So I've added <meta charset="utf-8"> and even edited the .htaccess and added AddDefaultCharset UTF-8 to it.
But I still have the same issue. There's no option in the WebHosting-Panel to change the character encoding. Is there any other option to show it correctly.
Thank you very much!
Something that made me curious - supposedly the default character encoding in HTML5 is UTF-8. However if I have a plain simple HTML file with an HTML5 doctype like the code below, I get:
"hello" in Russian: "ЗдраÑтвуйте"
In Chrome 33+, Safari 6, IE11, etc.
<!DOCTYPE html>
<html>
<head></head>
<body>
<p>"hello" in Russian is "здраствуйте"</p>
</body>
</html>
What gives? Shouldn't the browser utilize the UTF-8 unicode standard and display the text correctly? I'm using Coda which is set to save html files with UTF-8 encoding by default so that's not the problem.
The text data in the example is UTF-8 encoded text misinterpreted as window-1252 encoded. The reason is that the encoding has not been specified and browsers are forced to make a guess. To fix this, specify the encoding; see the W3C page Character encodings. Two simple ways that work independently of server settings, as long as the server does not send wrong encoding information in HTTP headers:
1) Save the file as UTF-8 with BOM (there is probably an option for this in your authoring program.
2) Add the following tag into the head part:
<meta charset=utf-8>
There is no single default encoding specified for HTML5. On the contrary, browsers are expected to make guesses when no encoding has been declared. This is a fairly complex process, described in 8.2.2.2 Determining the character encoding.
If you want to be sure which charset will be used by browser you must have in your page head
<meta content="text/html; charset=UTF-8" http-equiv="Content-Type">
otherwise you are at the mercy of local settings and browser automation.
I've got simple HTML pages in Russian with a bit of js in it.
Every browser going well except IE10. Even IE9 is fine. Next code is included:
<html lang="ru">
<meta http-equiv="Cоntent-Type" content="text/html"; charset="utf-8">
Also I've added .htacess with
AddDefaultCharset UTF-8
Still IE10 loads page in Cyrillic encoding (cp-1251 I believe), the only way to display characters in a right way is to manually change it to UTF-8 inside of a browser (or chose auto-detect mode).
I don't understand why IE10 force load 1251 instead of UTF-8.
The website to check is http://btlabs.ru
What really causes the problem is that the HTTP headers sent by the server include
Content-Type: text/html; charset=windows-1251
This overrides any meta tags. You should of course fix the errors with the meta tag as pointed out in other answers, and run a markup validator to check your code, but to fix the actual problem, you need to fix the .htaccess file. Without seeing the file and other server-side issues, it is impossible to tell how to fix that (e.g., server settings might prevent the effect of a per-directory .htaccess file and apply one global file set by the server admin). Note that the file name must have two c's, not one (.htaccess, not `.htacess').
You can check what headers are e.g. using Rex Swain’s HTTP Viewer.
The reason why things work on other browsers is that they apply the modern HTML5 principle “BOM wins them all”. That is, an HTTP header wins a meta tag in specifying the character encoding, but if the actual data begins with three bytes that constitute the UTF-8 encoded form of the Byte Order Mark (BOM), then, no matter what, the data will be interpreted as UTF-8 encoded. For some unknown reason, IE 10 does not do that (and neither does IE 11).
But this won’t be a problem if you just make the server send an HTTP header that declares UTF-8.
If the server has been set to declare windows-1251 and you cannot possibly change that, then you just need to live with it. Transcode your HTML files to windows-1251 then, and declare windows-1251 in a meta tag. This means that if you need any characters outside the limited repertoire representable in windows-1251, you need to represent them using character references.
perhaps because your 'o' in 'content' is not an ascii 'o'. notice that it is not red in Stackoverflow? i then copied it to a good text editor and see that it is indeed not an o. because the 'o' is not really an ascii 'o', that whole line probably should get ignored in every web browser, which should then depend on what default charset it uses. Microsoft and IE is notorious for picking bad defaults, thus is my reason why it doesn't work in IE. ;)
but codingaround has good advice too. it's best to put quotes around your attribute values. but that should not break a web browser.
you should use a doctype at the start:
<!DOCTYPE html>
<html lang='ru'>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
but the real culprit is your content and charset problem. notice my line. mine is very different. ;) that's the problem. note that mine has two ascii 'o's, one in "Content-Type" and another in 'content='.
As Shawn pointed out, copy and paste this:
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
This is a really good example of how non-Ascii letters that look like English Ascii letters can really mess things up!
Maybe you forgot changing cоntent=text/html; to cоntent="text/html";
As Shawn has already pointed out, it could also be content="text/html; charset=utf-8".
But as you have tried both things out, can you confirm if the IE10 output looks like this?
I can't really help further with this, as the only thing I have here is an IE 10 online emulator.
So far the possible problems are:
Different o character
I see, that the <meta> tag is still outside of <head>, put it in place
Problems with IE handling the content and charset attributes
I have a website in HTML5. Most of the content there is in Czech, which has some special symbols like "ř, č, š" etc...
I searched the internet for recommended charsets and I got these answers: UTF-8, ISO 8859-2 and Windows-1250.
<meta http-equiv="Content-Type" content="text/html; charset=ISO 8859-2" />
I tried UTF-8 which didnt work at all and then settled up with ISO 8859-2. I tested my website on my computer in the latest versions of Chrome, Firefox, IE and Opera. Everything worked fine but when I tested my website at http://browsershots.org/ , these characters were not displayed correctly (in the same browsers that I used for testing!).
How is that possible? How can I ensure, that all characters are displayed correctly in all web browsers. Is it possible that usage of HTML5 causes these problems (since its not fully supported by all browsers, but I am not using any advanced functions)?
Thanks for any hints and troubleshooting tips!
If you using HTML5, try this short declaration of charset:
<meta charset="UTF-8">
Additionally check you html file encoding. You can do it in Notepad++, menu Encoding -> Encode in UTF-8.
The important thing is that the actual encoding of the data coincides with the declared encoding. From the description, it seems that the actual encoding is ISO-8859-2, so you should declare it. Note that the name of the encoding has no space but hyphens. (I wonder whether you used it with a space – I would expect browsers to ignore the tag then.) The following is the simplest declaration:
<meta charset=ISO-8859-2>
I would not trust on browsershots.org getting things like this right. Testing on actual browsers is more useful.
UTF-8 is the best-supported character set for international usage. If it does not display correctly, you should ensure that your file is saved in UTF-8 format. Even Notepad has a "UTF-8" option in its save dialog.
i wrote some html with utf-8 charset.
in the head of the html there is also a
<meta http-equiv="Content-Type" content="text/html; charset=utf-8"/>
everything works fine in local, but when i upload files to the server, i see all my letters
àèìòù etc
distorted.
anybody know how could it be the problem? is possible that the server force a charset that isn't utf-8?
thanks a lot
Try saving the actual file with utf-8 encoding. That did the trick for me.
I use PHPStorm as editor: File->File Encoding->utf-8
Actually the META tag is not all you need for correct UTF-8 encoding. Your server might still send the page as Content-Type: text/html; charset=ISO-8859-1 in the header of the page.
You can check the headers e.g. with the Live HTTP Headers Firefox add-on.
There is a lot of secret sauce with UTF-8 encoding and making it work, you might want to go through this page (UTF-8: The Secret of Character Encoding) which explains everything you need to know and gives you advice on how to solve encoding problems.
To answer your question: Yes it is possible to force the server to use UTF-8, e.g. by using the PHP headers() function like so:
header('Content-Type:text/html; charset=UTF-8');