Is it possible to have a public ip with direct access instead of being in NAT in a google compute engine virtual machine?
Thank you in advance.
You can have an external IP but by default the instance will have a NAT policy. If you need non-NAT'ed traffic, what you are looking for is a target instance because as stated in the documentation:
Target instances do not have a NAT policy applied to them.
After that, you can create forwarding rules to send traffic to your instance.
I hope it helps.
Static external IP addresses can be assigned to a compute engine VM.
You reserve a static external IP address in gcloud or through the API. After reserving the address, assign it to an instance during instance creation or to an existing instance. You will have to update the firewall to allow traffic on the port you want.
More info in the docs at:
https://cloud.google.com/compute/docs/instances-and-network#reservedaddress
Related
I need to get new external IP address every time when I recreate my instance.
Current implementation may use previous ips.
How can I achieve the goal with static or ephemeral ips?
Or how can I get GCE ips pool?
I am adding bellow information with Kolban.
For the external IP Google cloud has two categories:
Static external IP addresses
Ephemeral external IP addresses
The basic difference between these two are Static one is long term assignment until hey are explicitly released from that assignment, and remain attached to a resource until they are explicitly detached. Where, Ephemeral remain attached to a VM instance only until the VM is stopped and restarted or the instance is terminated. If an instance is stopped, any ephemeral external IP addresses that are assigned to the instance are released back into the general Compute Engine pool and become available for use by other projects.
As you are wishing for the new IP address for your instance, it seems Ephemeral external IP addresses is a better choice. But you can use the Static external IP addresses to create an IP pool anyway and rotate your reserved static external IP address, which has cost implications.
The external IP are configured in the accessConfigs. You can see accessConfigs if you describe your instance by below command in cloud shell.
$ gcloud compute instances describe [INSTANCE_NAME] --zone=[ZONE]
You can create a new VM and assign a static IP with the help of the Document and below command.
$ gcloud compute instances create [INSTANCE_NAME] --private-network-ip [IP_ADDRESS]
OR
You can change or assign an external IP in your existing VM following the steps of the document (GCLOUD), which are:
[Optional] Reserve a static external IP address (if you want to have the reserve external IP and this has cost implications).
Delete existing access configs.
Add the new external IP address.
When you create a Compute Engine instance and give it a public IP address you have two choices for that IP. It can either be ephemeral ... this means that the IP address is assigned (randomly) by Google and may change the next time the Compute Engine is restarted. The alternative is that it is static. These are IP addresses that Google fixes for you and are explicitly yours until you release them. There is no charge for a static IP address if it is actively being used (eg has a Compute Engine running that is using it). However if unused, you are charged 24 cents a day (1 cent an hour).
If, for some reason, you need a new IP address for a compute engine on demand, you can reserve a new static IP address and associate that with your compute engine.
See also:
Reserving a static external IP address
I'm trying to build a webserver in Google Cloud Platform that hosts multiple websites (GBP, IE, FR, DK etc.)
Generally, we assign a range of IPs to the server statically, set the bindings in IIS, then loadbalance using a virtual IP.
It seems near enough impossible to assign another internal IP in GCP. Lots of guides about additional external IPs, but we don't want a public facing webserver like this.
Anybody have any idea on how to add additional internal IPs to a VM / Instance?
Also, I have tried changing the internal address I have assigned to the Instance to static in network adapter settings, next thing I know I can't access my VM for love nor money, had to delete and re-create. If I go into advanced settings to add additional static IPs, w'ere set to DHCP apparently, so can't add additional IPs.
Thanks all.
Answer that I recieved from GCE discussion group, in Google Groups:
"You can add additional internal IP addresses to a VM instance. This is possible by enabling IP forwarding for the VM, creating a static network route, adding appropriate firewall rules, and setting additional internal IP addresses to network adapter of Windows. These steps are described in this article for Linux machines (https://cloud.google.com/compute/docs/networking#set_a_static_target_ip_address). The same steps are valid for Windows VMs. You will need to keep the initial internal IP address, subnet mask, gateway address and DNS settings of the adapter and manually enter them in properties of IPv4 of the network adapter. The below is a screenshot of my configuration on a VM instance (Windows 2008 R2) that perfectly works."
Update:
Now, you can create instances with multiple network interfaces On Google Compute Engine and assign IPs. For more information, refer to this public documentation link. However, currently it has following limitations:
Alias IP ranges are not supported on any network interface on a VM
that has multiple network interfaces enabled.
You cannot modify or delete the network interfaces after the VM has
been created.
GCP Target Proxies are used to provide a public entry point to HTTP(S) backend services.
Is there any way to accept traffic only from the Target Proxy, and not directly?
You don't have to assign external IPs to your backend instances. When creating instances, you have 3 choices:
networkInterfaces[].accessConfigs is undefined, no external IP;
networkInterfaces[].accessConfigs[].natIP is undefined, use ephemeral external IP;
networkInterfaces[].accessConfigs[].natIP is defined, use static external IP.
If you are using gcloud, use --no-address flag with gcloud compute instances create for no external IP case.
For existing instances with external IP, you can delete the accessConfig, see gcloud and API.
BTW, Connecting to instances that do not have external IP addresses might be useful to you.
I have a cluster on a google container engine. There are internal service with the domain app.superproject with exposed port 9999.
Also I have an instance in google compute engine.
How can I access to service with it's domain name from the instance of google compute engine?
GKE is built on top of GCE, a GKE instance is also a GCE instance. You can view all your instances either in the web console, or with gcloud compute instances list command.
Note that they may not be in the same GCE virtual network, but in your use case, it's better to put them in, e.g., the default network (I guess they are already, but check their network properties if you are not sure), then they're accessible to each other through the internal IPs (if not, check firewall settings).
You can also use instance names, which resolve to internal IPs, e.g., ping instance1.
If they're not in the same GCE virtual network, you have to treat the service as an external service by exposing an external IP, which is not recommended in your use case.
Is there a network-level IP address blocking/blacklist capability to a Google Compute Engine instance? For example, a site is hosted on a GCE instance to allow public users access. However, a malicious script runs several times/second which is not legitimate traffic. Ideally, the IP of the offending user could be placed on a block list so traffic would not be routed to the instance, rather than just server side only mechanism (apache modules, IPtables, etc) which still requires CPU/RAM/disk resources.
You can setup an HTTP load balancer for your instances, and allow traffic only from the LB IP address to your instances. More information can be found in this Help Center article.
GCP does not provide WAF natively. You can use marketplace WAF (like Brocade WAF) to block IPs.
https://cloud.google.com/launcher/solution/brocade-public-1063/stm-csub-1000-h-saf?q=brocade
This is absolutely not the recommended way to manage your firewall blacklist.
However...
In the compute GUI, you can create a firewall rule set action on match to "deny" and protocols and port to "deny all". Then set source IPs.
compute GUI
You could then run a cron job to update your firewall through gcloud compute firewall-rules update to update source IPs should your list change.
Note (from Google - https://cloud.google.com/vpc/docs/using-firewalls):
gcloud compute firewall-rules update is used to update firewall rules that allow/deny incoming/outgoing traffic. The firewall rule will only be updated for arguments that are specifically passed. Other attributes will remain unaffected. The action flag (whether to allow or deny matching traffic) cannot be defined when updating a firewall rule
Yes you can block it using Gcloud Firewall.
Try creating the firewall rule from the command line or by logging into Google Cloud.
Example:
gcloud compute firewall-rules create tcp-deny --network example-network --source-ranges 10.0.0.0/8 --allow !tcp:80
Above Rule will block the range 10.0.0.0/8 to port 80 (tcp).
Same can be done to block other IP Ranges over tcp and udp.
For more info check this: glcoud network config