I have an embedded Linux system that uses ramdisk boot so it has run time no persistent storage available (it does have Flash to store kernel and ramdisk).
The only connectivity is RS-232 serial login console. So I am limited by what is provided by its built in busybox. I want to retrieve the ramdisk, modify it, and rewrite the ramdisk. The kernel does not have Flash filesystem support built-in. The ramdisk partition size is about 10 MBytes. When all files in the user directory are deleted, the free ramdisk size is about 14 MBytes.
The command dd is available so I can copy the ramdisk partition to the ramdisk, and can write to the flash from a ramdisk file. flashcp is also available.
So my problem is now how to receive and send binary files through the RS-232 serial console?
I research the followings and none is useful for me:
Linux command to send binary file to serial port with HW flow control? on stackoverflow
Binary data over serial terminal on stackoverflow
Transferring files using serial console on k.japko.eu
File transfer over a serial line on superuser.com
How to get file to a host when all you have is a serial console? on stackexchange
Mostly because x/y/zmodem are not available in the busybox.
Any idea? Thanks!
Per the request, here's what I should have included in the first place.
Available u-boot commands:
U-Boot >?
? - alias for 'help'
askenv - get environment variables from stdin
base - print or set address offset
bdinfo - print Board Info structure
boot - boot default, i.e., run 'bootcmd'
bootd - boot default, i.e., run 'bootcmd'
bootm - boot application image from memory
cmp - memory compare
coninfo - print console devices and information
cp - memory copy
crc32 - checksum calculation
crc32_chk_uimage- checksum calculation of an image for u-boot
echo - echo args to console
editenv - edit environment variable
env - environment handling commands
exit - exit script
false - do nothing, unsuccessfully
fatinfo - print information about filesystem
fatload - load binary file from a dos filesystem
fatls - list files in a directory (default /)
fatwrite- write file into a dos filesystem
go - start application at address 'addr'
gpio - input/set/clear/toggle gpio pins
help - print command description/usage
i2c - I2C sub-system
iminfo - print header information for application image
imxtract- extract a part of a multi-image
itest - return true/false on integer compare
loadb - load binary file over serial line (kermit mode)
loads - load S-Record file over serial line
loady - load binary file over serial line (ymodem mode)
loop - infinite loop on address range
md - memory display
mdc - memory display cyclic
mm - memory modify (auto-incrementing address)
mw - memory write (fill)
mwc - memory write cyclic
nm - memory modify (constant address)
printenv- print environment variables
reset - Perform RESET of the CPU
run - run commands in an environment variable
saveenv - save environment variables to persistent storage
saves - save S-Record file over serial line
setenv - set environment variables
sf - SPI flash sub-system
showvar - print local hushshell variables
sleep - delay execution for some time
source - run script from memory
sspi - SPI utility command
test - minimal test like /bin/sh
true - do nothing, successfully
usb - USB sub-system
usbboot - boot from USB device
version - print monitor, compiler and linker version
U-Boot >
Available busybox commands:
BusyBox v1.13.2 (2015-03-16 10:50:56 EDT) multi-call binary
Copyright (C) 1998-2008 Erik Andersen, Rob Landley, Denys Vlasenko
and others. Licensed under GPLv2.
See source distribution for full notice.
Usage: busybox [function] [arguments]...
or: function [arguments]...
BusyBox is a multi-call binary that combines many common Unix
utilities into a single executable. Most people will create a
link to busybox for each function they wish to use and BusyBox
will act like whatever it was invoked as!
Currently defined functions:
[, [[, addgroup, adduser, ar, ash, awk, basename, blkid,
bunzip2, bzcat, cat, chattr, chgrp, chmod, chown, chpasswd,
chroot, chvt, clear, cmp, cp, cpio, cryptpw, cut, date,
dc, dd, deallocvt, delgroup, deluser, df, dhcprelay, diff,
dirname, dmesg, du, dumpkmap, dumpleases, echo, egrep, env,
expr, false, fbset, fbsplash, fdisk, fgrep, find, free,
freeramdisk, fsck, fsck.minix, fuser, getopt, getty, grep,
gunzip, gzip, halt, head, hexdump, hostname, httpd, hwclock,
id, ifconfig, ifdown, ifup, inetd, init, insmod, ip, kill,
killall, klogd, last, less, linuxrc, ln, loadfont, loadkmap,
logger, login, logname, logread, losetup, ls, lsmod, makedevs,
md5sum, mdev, microcom, mkdir, mkfifo, mkfs.minix, mknod,
mkswap, mktemp, modprobe, more, mount, mv, nc, netstat,
nice, nohup, nslookup, od, openvt, passwd, patch, pidof,
ping, ping6, pivot_root, poweroff, printf, ps, pwd, rdate,
rdev, readahead, readlink, readprofile, realpath, reboot,
renice, reset, rm, rmdir, rmmod, route, rtcwake, run-parts,
sed, seq, setconsole, setfont, sh, showkey, sleep, sort,
start-stop-daemon, strings, stty, su, sulogin, swapoff,
swapon, switch_root, sync, sysctl, syslogd, tail, tar, tcpsvd,
tee, telnet, telnetd, test, tftp, tftpd, time, top, touch,
tr, traceroute, true, tty, udhcpc, udhcpd, udpsvd, umount,
uname, uniq, unzip, uptime, usleep, vconfig, vi, vlock,
watch, wc, wget, which, who, whoami, xargs, yes, zcat
In uboot you could use loady/loadx to get file from pc via uart.I usually use teraterm to send file.
The process should be this:
run loady in uboot
use teraterm send data
the file is transfer to you device's memory located in 0x01000000.
Independently I found a way to upload binary files through the Linux console and I'll document the steps here in case others find it useful since I had a hard time looking for this information on the net.
Here's the theory: change the console mode to raw so all the binary traffic are't interpretted as console command, e.g. ctrl-C. Turn off echo so it doesn't add extra serial traffic. Run tar to accept input from the stdin. Since ctrl-C won't work, and tar won't know when to terminate, use a background task to kill the login shell so you can login again to do your staff.
Steps:
Create a script to run in the background. Change myvar variable so it kills the login shell after the transfer is complete. Currently 120 corresponds to 1200 seconds, sufficient for a 10 MBytes file. In addition edit the 808 to match your login shell PID:
create bg file:
myvar=120
while [ $myvar -gt 0 ]
do
myvar=$(( $myvar-1 ))
echo -e " $myvar \n"
ls -l
sleep 10
done
kill -9 808
Launch the script in the background:
in console type:
source ./bg &
Use stty to change console to raw mode and do not echo
in console type:
stty raw -echo
Start tar to untar stdin. Note: I have to use ctrl-J since no longer work after the stty command
in console type and ends with ctrl-j, not :
tar zx -f - 1> 1.log 2> 2.log
Start Teraterm to send binary file
Wait for completion and the new login prompt
I forgot I asked this question. I figured out how to make ssh connection which in turn allows many more things to be done more easily. Of course it requires sshd in addition to nc and stty so you are out of luck if these are not available on your embedded Linux. I have tried it several times and it seems to work well, allowing multiple ssh sessions to be established, and mc to transfer files.
You will need two shell sessions on the host computer, one to loop the serial port to socket, and the other for the ssh, and more if you want to establish more ssh sessions.
First you need to setup the serial port. The '--noreset' option for picocom does this:
sudo picocom --noreset -b 115200 -e b /dev/ttyUSB3
Quit picocom once this is done (^B^X to exit).
Next we need to verify that the line endings are not translated or else ssh won't work. In the first shell run:
cat /dev/ttyUSB3 | hexdump -C
In the second shell run:
echo "echo -e \"LFLF\\n\\nCRCR\\r\\rEND\"" > /dev/ttyUSB3
You may see that \n (0x0A) is translated to \r\n (0x0D0x0A)
Use stty to set raw mode without echo and you should see no more translation:
echo "stty raw -echo" > /dev/ttyUSB3
echo "echo -e \"LFLF\\n\\nCRCR\\r\\rEND\"" > /dev/ttyUSB3
Finally in the first shell run nc to funnel local traffic between the serial port and ssh socket:
cat /dev/ttyUSB3 | nc -l -p 2222 > /dev/ttyUSB3
and funnel remote serial traffic to sshd:
echo "while true ; do nc localhost 22 ; done" > /dev/ttyUSB3
and connect ssh with port forwarding:
ssh -vvv root#localhost -p 2222 -L 0.0.0.0:22022:localhost:22
you can make more ssh connections simultaneously:
ssh -vvv root#localhost -p 22022
if you use mc, you can connect to it so you can easily browse the remote file system and copy files:
sh://root#localhost:22022
Last words: nc strips the TCP headers so the ssh packets are no checksumed and are not retried. If there were data error, the connection will break. If you remember your login shell PID, you can kill it and login again, otherwise you have to reboot. The '-vvv' flag for the ssh is for debugging.
default: on
# description: mysqlchk
service mysqlchk
{
# this is a config for xinetd, place it in /etc/xinetd.d/
disable = no
flags = REUSE
socket_type = stream
type = UNLISTED
port = 9200
wait = no
user = root
server = /usr/bin/mysqlclustercheck
log_on_failure += USERID
only_from = 0.0.0.0/0
#
# Passing arguments to clustercheck
# <user> <pass> <available_when_donor=0|1> <log_file> <available_when_readonly=0|1> <defaults_extra_file>"
# Recommended: server_args = user pass 1 /var/log/log-file 0 /etc/my.cnf.local"
# Compatibility: server_args = user pass 1 /var/log/log-file 1 /etc/my.cnf.local"
# 55-to-56 upgrade: server_args = user pass 1 /var/log/log-file 0 /etc/my.cnf.extra"
#
# recommended to put the IPs that need
# to connect exclusively (security purposes)
per_source = UNLIMITED
}
/etc/xinetd.d #
It is kind of strange that script works fine when run manually when it runs using /etc/xinetd.d/ , it is not working as expected.
In mysqlclustercheck script, instead of using --user= and passord= syntax, I am using --login-path= syntax
script runs fine when I run using command line but status for xinetd was showing signal 13. After debugging, I have found that even simple command like this is not working
mysql_config_editor print --all >>/tmp/test.txt
We don't see any output generated when it is run using xinetd ( mysqlclustercheck)
Have you tried the following instead of /usr/bin/mysqlclustercheck?
server = /usr/bin/clustercheck
I am wondering if you could test your binary location with the linux which command.
A long time ago since this question was asked, but it just came to my attention.
First of all as mentioned, Percona Cluster Control script is called clustercheck, so make sure you are using the correct name and correct path.
Secondly, since the server script runs fine from command line, it seems to me that the path of mysql client command is not known by the xinetd when it runs the Cluster Control script.
Since the mysqlclustercheck script as it is offered from Percona, it uses only the binary name mysql without specifying the absolute path I suggest you do the following:
Find where mysql client command is located on your system:
ccloud#gal1:~> sudo -i
gal1:~ # which mysql
/usr/local/mysql/bin/mysql
gal1:~ #
then edit script /usr/bin/mysqlclustercheck and in the following line:
MYSQL_CMDLINE="mysql --defaults-extra-file=$DEFAULTS_EXTRA_FILE -nNE --connect-timeout=$TIMEOUT \
place the exact path of mysql client command you found in the previous step.
I also see that you are not using MySQL connection credentials for connecting to MySQL server. mysqlclustercheck script as it is offered from Percona, it uses User/Password in order to connect to MySQL server.
So normally, you should execute the script in the command line like:
gal1:~ # /usr/sbin/clustercheck haproxy haproxyMySQLpass
HTTP/1.1 200 OK
Content-Type: text/plain
Where haproxy/haproxyMySQLpass is the MySQL connection user/pass for HAProxy monitoring user.
Additionally, you should specify them to your script's xinetd settings like:
server = /usr/bin/mysqlclustercheck
server_args = haproxy haproxyMySQLpass
Last but not least, the signal 13 you are getting is because you try to write something in a script run by xinetd. If for example in your mysqlclustercheck you try to add a statement like
echo "debug message"
you probably going to see the broken pipe signal (13 in POSIX).
Finally, I had issues with this script using SLES 12.3 and I finally manage to run it not as 'nobody' but as 'root'.
Hope it helps