I'm getting the following error when submitting my app in the Windows Phone Dev Center:
Couldn't save changes. We couldn't save the updated info at this time. Try again later. If you continue to get this message, contact support and provide the following ID: and specify current DateTime in UTC: .
This worked on the weekend and the submission passed but I found a few bugs that I wanted to fix before going public, so I cancelled the release and tried to upload a new one.
So far I've tried deleting the submission and creating a new one, renaming the upload file to make it shorter and even re-submitting the build that passed the first time. All attempts still failed.
Any assistance or suggestions appreciated!
Looks like the only recourse is support. Microsoft engineering "tweaked" something and now it is working. If you run into this, use the support link http://dev.windows.com/en-us/community/support.
Related
I am trying to update my app in the windows store with a new version. I am getting the error message in the UI:
This package is superseded by one or more higher-ranked packages.
The version number of the new binary is higher than the existing one. Here is what the version numbers look like in the store UI:
How can I raise the rank of the new version so that the store accepts it? What are the elements to package rank? I searched online for this but could not find the answer.
Thanks.
A day after first having the problem, I submitted a package numbered 2.0.6, which I had tried yesterday, and it went right in.
I tried to delete the original submission as suggested above, before trying submitting 2.0.6, but couldn't find a delete button. Maybe by opening the older one up in the UI I made the UI realize it was older. dunno.
Recently I’ve release my Windows 10 UWP application in store .
Last week I released a new update in store ,after a week I receive lots of mail from users about a bug in my app.(Pages that want to connect to database can't open and they crash)
Funny part is that when I deploy and run it by visual studio or Powershell (appx-package command) everything works fine, so I can't find a thing.(Even in RemoteMachine and Emulator)
So I was checking my dashboard in dev center and find some "failed log" there.
How can I use these logs to find my problem?
I'm really stuck and don't know what to do!!
Solution:
In Properties of the Project there is a file named Default.rd.xml that contains an element like <Assembly Name="*Application" ...
So by mistake the attribute it was changed to name="*Application" (Don't know what changed that and VisualStudio didn't notice that.)
When I try to run my Windows Store app, it won't, and shows me this:
..."does not support the contract specified"? What contract? I'm not implementing any contract; I assume it means the Settings contract or some such, but I'm not doing any of those yet.
I went to the Help page suggested, and it says, in part, "To diagnose these errors
There are no sure ways to fix these errors. Use these techniques to diagnose the problem."
The first suggestion is:
Open Event Viewer (on the Windows Start menu, search for Event Viewer.) In Event Viewer, navigate in the tree to the Application and Services Log\Microsoft\Windows\Apps folder.
Filter the view to event Ids: 5900-6000
Examine the log and see what occurred.
Windows 8.1 only brings up web pages when I search for "Event Viewer"
Actually, I did write a utility to catch event logs, and I ran that. I found these:
***Type: Error
Source: Microsoft-Windows-Immersive-Shell
Time Generated: 11/27/2014 15:10:39
Message: Activation of app App.adaf78a74.a8c80.a4ff5.a99ca.a97636d548196_8wekyb3d8bbwe!Designer.App failed with error: -2144927148 See the Microsoft-Windows-TWinUI/Operational log for additional information.
Type: Error
Source: Microsoft-Windows-Immersive-Shell
Time Generated: 11/27/2014 15:20:08
Message: Activation of app axXAndSpace.Visits_qtyjefqf75sa6!App failed with error: -2144927148 See the Microsoft-Windows-TWinUI/Operational log for additional information.***
But where is "Microsoft-Windows-TWinUI/Operational log"?
The second suggestion on the Help page was:
Use the native debugger
Configure the project to run under a native debugger.
In Visual Studio, set the Debugger Type to Native Only on the Debug (Debugging in C++ and JavaScript) page of the property pages of the start-up project.
Look at the exceptions being thrown by looking at the output window. You might want to configure the debugger to stop when these exceptions are thrown.
I did that, but it gave me no more information than previously - nothing at all displays in the Output pane.
What could be the cause of this?
UPDATE
Just to update the progress:
Based on Iris Classon's suggestions, I went to Control Panel to see if my app was installed so that I could uninstall it, but it's not in that list.
If I search for the app by typing its name, it tries to start up - its splash screen displays, but goes no further than that.
I went to Program Files\WindowsApps, and when selecting it got, "You don't currently have persimmons to access this folder, click continue to continually get access"
That leads me to "You have been denied permission to access this folder; to gain access to this folder, you will need to use the security tab"
Click the "security tab" link takes me to that tab, and a "For special permissions or advanced settings, click Advanced"
I do so.
That takes me to a Permissions tab, which says, "You must have Read permissions to view the properties of this object; Click continue to attempt the operation with administrative permissions"
I then selected (one at a time, as that is all it allows):
Trusted Installer : Full control
System: Read, Write, and Execute
System: Full Control
Administrators: Read & Execute
But so far, none of that seems to do anything good.
UPDATE 2
This problem has just "gone away" today; I don't think it was anything I did. I added a UserControl, tried running the app again, and now it runs - I don't see that error message. However, I do see a seemingly unrelated one. (at least I got further).
I just had this problem on a fresh install of Windows 8.1 on my laptop. I'm not sure which one of these steps solved it, but until somebody can give you a more exact answer here is something to try as I am sure you are keen on coding.
Only Store Apps run from VS gives that error, other Store apps work fine.
I first of all changed permissions on my WindowsApps folder under Program Files and made sure that I had full access to the folder and sub folders. Restarted the laptop, still no luck.
Then I set up an admin guest account (just something I tend to do for when I need to record tutorials- so not related to trying to solve the error). Out of curiosity I tried to create and run the same Windows Store App and got an error that another user had installed the app. Strange, how was it installed if it gave me the error that it couldn't activate the app on the main account?
I logged back in as the main user and uninstalled the application (which was showing up as installed), and I can now run any Store App from VS without problems.
Not sure this is an answer since I'm not sure what made it work, but give it a try and hopefully somebody else can clear this us up. I'll investigate further, but I'm on a train right now with poor WiFi connection :)
Best of luck!
I had the same scenario, here are the steps I did to resolve:
I tried to create packages, chose not to associate with the store.
It said that the certificate is expired, I created a new test certificate.
I created the test packages successfully.
Tried to run the project from VS and it finally ran.
I believe all of this had to do with the certificate. very frustrating and time wasting issue.
I also had the same problem and following steps fixed it. Hope it will help some one else.
Open the appxmanifest file
Go to "Packaging" tab
Select "Choose Certificate" and select "Pick from certificate store" and select your cetificate and click on ok
I'm relatively new to batch commands and have been learning steadily. My problem is like this:
I've understood how to kill processes using batch commands using many different methods. However, I've been unable to figure out how to close a single tab in, preferably, chrome.
Any thoughts would be greatly appreciated!
Thanks!
So, I suppose I should state my exact problem.
I'm using notepad++ as my LaTeX compiler and sending the final pdf to chrome. The reason: I usually have ~20 tabs open related to the project I'm working on and it just makes my work much easier to split my screen between notepad++ and chrome.
My current batch file compiles the LaTeX code and sends the compiled document to chrome as a new tab. For obvious reasons, i don't want to close a tab each time I compile, so I thought that closing the current tab at the same time during compiling would solve my problem. But, I just can't find a way to get my batch file to only close the tab with my compiled pdf.
Thanks in advance!
check all running chrome instances/tabs with :
wmic process where "caption='chrome.exe'" get
and see processes properties.Probably the best indicator that you can rely on in this case is CreationDate (other properties are basically the same for all chrome instances) - it always comes in format YYYYMMDDHHmmss.ms and is easy for string comparison.But you'll have to know the time when it was started.
During packaging the Windows Store application, I get an unspecified error [APPX1204]:
C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\v11.0\AppxPackage\Microsoft.AppXPackage.Targets(1139,9): error APPX1204: Failed to sign 'D:\Projects\VS2012\Stroik\Stroik\AppPackages\Stroik_1.0.0.11_AnyCPU_Test\Stroik_1.0.0.11_AnyCPU.appx'. SignTool Error: An unexpected internal error has occurred.
Build output refers to the part of a file generated by VS2012:
<SignAppxPackage AppxPackageToSign="#(FinalAppxPackageItem)"
CertificateThumbprint="$(PackageCertificateThumbprint)"
CertificateFile="$(PackageCertificateKeyFile)"
HashUri="$(_HashUri)"
EnableSigningChecks="$(EnableSigningChecks)"
>
<Output TaskParameter="ResolvedThumbprint" PropertyName="ResolvedThumbPrint"/>
<Output TaskParameter="AppxPackagePublicKeyFile" PropertyName="AppxPackagePublicKeyFile" />
</SignAppxPackage>
Yesterday packaging proceeded successfully. Today I added aditional logic to my app and changed some data in manifest. Since then I'm reciving presented error. I tried to regenerate Certificate in Packaging menu, delete Store/Temporary Keys (then regenerate), ... much more but nothing helps.
Now I have no idea how to handle it. Furthermore packaging a new project (as it is provided by vs2012) results in the same error.
Have you got any suggestions how to solve it.
If it helps anyone else, I was trying to make the build on a network share (virtualizing windows). Creating it on the Windows partition solved the issue.
I was developing on a Virtual Machine in VirtualBox and tryed to publish to the shared folder.
Change the output folder to a local folder on the virtual maschine solved it.
Granted this is older - see if you can try it with a different live id
You could also try to generate a new app, and diff the manifests between the apps.
Now according to:
http://social.msdn.microsoft.com/Forums/en-US/toolsforwinapps/thread/f25939fb-c48c-4bd0-938e-6a0afbd2dca0/
you may want to sign out, use IE 'in safe private browsing' and create a new one.
Also ensure that IE is set in "Browsing History->Settings" to get a new version of the page every time.
Login with the new one and give it a try.
I'm not sure if this error is related here or not, but it's a starting point based on the prior feedback on the above post.
This japanese site lists the same error code and seems to have the same resolution as well
http://coelacanth.heteml.jp/blog/windows-8signtool-error-an-unexpected-internal-error-has-occurred/
Its worth a shot, but I'll admit on this one not being 100% sure, just trying to help out : )