Related
I've installed Django support in Visual Studio Code and associated */templates/*.html with django-html as the extension demands.
However, it can't auto-compete HTML Tags as I've done so.
And if I just associate HTML with itself, then it can't intellisense Django Template code.
How can I autocompleting both?
I managed to do so by:
installing the Django extension
adding the following configuration to my workspace settings.json file:
"emmet.includeLanguages": {
"django-html": "html",
}
Here is essentially the same fix, but using the VS Code UI which may make it easier for some people - especially if your new to this and your settings.json file has not been generated yet.
In VS Code go to File -> Preferences -> Settings
Once there you can switch to the 'Workspace' tab if you want this setting to only be for this project/workspace, or stick with the 'User' tab if you want this on all projects/workspaces.
Open the 'Extensions' item in the list and click on 'Emmet'.
Under 'Include Languages' click the 'Add Item' button. Fill it in with:
Item: django-html
Value: html
and click the 'OK' button.
This will add the setting for you to your settings.json file, or generate you a new settings.json file if you don't have one.
Note: To get the autocomplete/generate to work you might need to type your tag without the brackets e.g. li (not <li>), then press enter to get <li></li>
As namespace_Pt said, I tried it and it works. I will list which extensions are in my Visual Studio Code installation.
Django 1.2.0
Visual Studio IntelliCode (I tried, and it works without this one)
"emmet.includeLanguages": {
"django-html": "html",
}
I added it, at the end of the settings.json file. I find the file from the settings's search bar. Just undo what Visual Studio Code added itself and add the code above. Don't forget to add a comma.
Where you find the .json file in settings
How it looks like after I added it
Follow the steps:
Install this as your extension: Django
Write the lines of codes in settings.json of your Visual Studio Code:
"emmet.includeLanguages": {
"django-html": "html",
}
How can I get settings.json?
Answer: The menu command File → Preferences → *Settings (Code → Preferences → Settings on Mac) provides entry to configure user and workspace settings. You are provided with a list of Default Settings. Copy any setting that you want to change to the appropriate settings. JSON file.
Works for me (vs 1.62.3) :
in file settings.json before:
"emmet.includeLanguages": {
"django-html": "html",
}
include:
{
"files.associations": {
"**/*.html": "html",
"**/templates/**/*.html": "django-html",
"**/templates/**/*": "django-txt",
"**/requirements{/**,*}.{txt,in}": "pip-requirements"
},
Total file look like:
{
"files.associations": {
"**/*.html": "html",
"**/templates/**/*.html": "django-html",
"**/templates/**/*": "django-txt",
"**/requirements{/**,*}.{txt,in}": "pip-requirements"
},
"files.autoSave": "afterDelay",
"emmet.includeLanguages": {"django-html": "html"},
}
I tried everything that was listed above but nothing worked for me.
Then after much hustle I found the solution.
In your VS Code Go to..
--> File --> preferences --> settings --> workspace(if you want this setting to just be this workspace specific or "user" if you want it for all) --> extensions --> emmet--> now click on Edit in settings.json --> now in that file under the curly braces that's already given, write or copy paste this ->
"emmet.triggerExpansionOnTab": true,
"files.associations": {"*html":"html"},
and press ctrl + s to save.
It worked for me!! I hope it will work for you too.!
VS code has suddenly stopped recognizing html files (the file icon is the default one for files with no extension)
all other file extensions work just fine
except for html
the tags still work but it won't autocomplete
Adding this to file extensions worked for me:
"files.associations": {
"*.html": "html"
}
In my case, for this problem the solution was to manually add *.html to files.associations, in user settings. Its unlogical but it seems that somehow the extension wasn't associated to the type of file. Now everything works perfectly...
Go to the settings (In mac it is Code -- > Preferences --> Settings)
In the search bar search for Association.
In Files:Associations click on Add items.
update key = *.html & Value = html
Below is the screenshot for reference.
I had the same issue but none of the other solutions worked for me!
You can try this:
Go to the path where the "settings.json" file exits, for my case the path is:
C:> Users> User123 > AppData > Roaming > Code > User > settings.json
Now, paste the code in the file:
"code-runner.executorMap": {
"html": "\"C:\\Program Files (x86)\\Google\\Chrome\\Application\\chrome.exe\"",
}
Now search for the "files.associations" section in your settings.json file:
As an example
Now if you have the "files.associations" section then just add the line there:
"*html": "html"
(don't forget to write a comma after a line if there are more lines in it)
or if you don't have a "files.associations" section, then copy paste the code there:
"files.associations": {
"*.rmd": "markdown",
"*html": "html"
},
I had the same problem in Windows 10 a few minutes ago:
Yeah, from the solutions above I did this but still had some errors:
File -- > Preferences --> Settings
In the search bar search for Files: Association.
In Files:Associations click on Add item button.
update Item = *.html & Value = HTML
As shown below:
When I saved, I got this error
Unable to write into user settings. Please open the user settings to correct errors/warnings in it and try again.
The problem is that terminal.integrated.shellArgs settings have been deprecated.
One of the answers here will help:
So I just had this problem and I figured it out the problem was from an extension that I installed which is the pyscript extension I disabled it and everything started to work again!
Well if you have pyscript extension installed, disable it. It has conflicts with html files I guess.
Or if you don't want to disable it just ctrl+shift+p then change language mode. Select configure file association for html.
This applies for any extension not just pyscript. For me it was pyscript
I've download the latest Visual Studio Code and am trying to write some HTML code. For example, <div>, <a>, <p> tags. However, there are no HTML suggestions in Visual Studio Code:
I've read this article and it says:
Visual Studio Code provides basic support for HTML programming out of
the box.
However, I've tried to install HTML extension:
In addition, I've turned on HTML5 suggestion in settings.json file:
{
"workbench.colorTheme": "Visual Studio Light",
"workbench.activityBar.visible": true,
"editor.multiCursorModifier": "ctrlCmd",
"window.zoomLevel": 0,
"html.suggest.html5": true,
}
Nevertheless, HTML, CSS suggestion does not work.
What can I do to code with suggestions?
I think the issue is that Visual Studio Code is not detecting the file type correctly. If you notice in these pictures, vscode has correctly detected that I am writing a html file by the icon <> beside the file name and the language indicator in the bottom right of the screen.
The language indicator most likely says plain text in your case. Click on it and a menu should appear at the top centre of the screen. Then try the following:
Enabling Auto Detect. I think this will be the first option.
Selecting Configure File Association for '.html'...
2 can also be accomplished by adding
"files.associations": { "*.html": "html" }
to your settings.
OR just add to settings.json (File -> Preferences -> Settings):
{
// Configure file associations to languages (e.g. "*.extension": "html"). These have
//precedence over the default associations of the languages installed.
"files.associations": { "*.html": "html" },
}
Just go to "File -> Preferences -> Settings"
Search for "Associations"
Check this image
Go to
File > Preferences > settings > Extensions > Emmet
Then click on
( C:\Users\Code\User\settings.json ) #
for reference
Add the following code:-
"emmet.triggerExpansionOnTab": true,
"files.associations": {"*html":"html"},
Save the file.
ST2 seems to automatically filter out files with .lib extension in Goto Anything..., probably a default setting for filtering binary files. Is there a way to change this behavior?
You could edit this, or better yet, edit it in your Settings-User file.
// folder_exclude_patterns and file_exclude_patterns control which files
// are listed in folders on the side bar. These can also be set on a per-
// project basis.
"folder_exclude_patterns": [".svn", ".git", ".hg", "CVS"],
"file_exclude_patterns": ["*.pyc", "*.pyo", "*.exe", "*.dll", "*.obj","*.o", "*.a", "*.lib", "*.so", ........
Located:
~/Library/Application Support/Sublime Text 2/Packages/Default/Preferences.sublime-settings
As the title suggests, I would like to find out if there's a way to prevent ST2 from opening binary files when I click on them. For example when I click on an image, there's no point displaying the hex representation inside the text editor.
One additional note: I'm not interested in hiding binary files from the sidebar.
Files containing null bytes are opened as hexadecimal by default
In your User or Default Settings file:
"enable_hexadecimal_encoding": false
Unfortunately I'm not aware of a way to disabled previewing of specific formats, but if you want to avoid accidental clicks on enormous binary files that may slow down the editor you could disable all previewing from sidebar clicks.
In your User or Default Settings file(s):
"preview_on_click": false
I have similar situation like you. I dont want sublime open editor for binary like jpg png files. Instead open system default application is more reasonable.
Create one Build. Refer to Sublime Text 2 keyboard shortcut to open file in specified browser (e.g. Chrome) It will both open default application and hex editor.
Plugin OpenDefaultApplication https://github.com/SublimeText/OpenDefaultApplication
It will have context right click menu OpenInDefaultApplication. But It will both open default application and hex editor as well
Plugin: Non Text Files https://packagecontrol.io/packages/Non%20Text%20Files Add config in the user setting
"binary_file_patterns": ["*.JPG","*.jpg", "*.jpeg", "*.png", "*.gif", "*.ttf", "*.tga", "*.dds", "*.ico", "*.eot", "*.pdf", "*.swf", "*.jar", "*.zip"],
"prevent_bin_preview": true,
"open_externally_patterns": [
"*.JPG",
"*.jpg",
"*.jpeg",
"*.JPEG",
"*.png",
"*.PGN",
"*.gif",
"*.GIF",
"*.zip",
"*.ZIP",
"*.pdf",
"*.PDF"
]
I choose the third way, it's quite suitable for me. It will open jpg file in system default application and quickly close the edit mode automatically.
For Sublime Text 3
file_exclude_patterns Setting
If your binary files have a file extension, then yes.
In your Sublime Settings you can use this setting to prevent you from seeing the files in the left project folders:
"file_exclude_patterns":
[
"*.db",
"*.dll",
"*.ds_store",
"*.egg",
"*.enc",
"*.eot",
"*.exe",
"*.ko",
"*.otf",
"*.pdb",
"*.pdf",
"*.pgn",
"*.plist",
"*.psd",
"*.pxm",
"*.pyc",
"*.rdb",
"*.sqlite",
"*.sublime-workspace",
"*.ttf",
"*.woff",
"*.woff2",
"*.zip",
],
Just modify this to your needs, and then you will not see this in your project folders in Sublime.
Toggle
Maybe you just want to turn it off or on for the current file?
Try Sublime Command Palette using CTRL OR Command + Shift + P
and type:
HexViewer: Toggle Hex View
and press Enter or Return then the file will switch between HEX and TEXT.
Extra
If you don't want any-file to be converted to HEX then please use #steven-teo's answer.
If you want to learn more about the HEX Viewer you can see the Code Here & Documentation Here.
**Note: Keys vary for the Sublime Command Palette more info on that.