I want to create a snippet in my sublime text to quickly write:
col-xs-XX col-sm-XX col-md-XX col-lg-XX
with XX a number between 1 and 12
I tried this without success:
<snippet>
<content><![CDATA[
col-xs-$1 col-sm-$1 col-md-$1 col-lg-$1
]]></content>
<tabTrigger>col([0-9]*)</tabTrigger>
</snippet>
https://github.com/JasonMortonNZ/bs3-sublime-plugin/tree/master/grid => this one was closely what I want but they define a snippet for all numbers...
No success with the ST2 documentation or googling
Is there a solution to my problem?
Regards,
According to this (rather old) forum post, RegEx isn't supported for triggers
Related
does anyone know how to remove everything after the first space occurs in sublime text 3.
For example i have this file:
abcde fghi jklm
And i would like to have this output:
abcde
After searching a bit this is what worked for me:
In regular expression mode, search for:
\t.*
And replace with
Nothing
And a few years later...
Tested on macOS:
Use ⌥+⌘+F to popup the Find/Replace dialog.
Make sure the .* button is on (this enables the Regex mode).
Find: \ .*
Replace: don't type anything here
Obs: the \ in the regex is not strictly necessary, I just added it to emphasize the fact that there is a space in the string before the dot.
Obs2: the answer from the OP works only if you have tabs instead of spaces.
Press CtrlH to replace with regex, and use:
Find What: ^(\S+)\s?[^\n]*\n
Replace With: \1
I have a HTML Table of Contents page containing list of book chapters with hyperlinks:
Multimedia Implementation<br/>
Table of Contents<br/>
About the Author<br/>
About the Technical Reviewers<br/>
Acknowledgments<br/>
Part I: Introduction and Overview<br/>
Chapter 1. Technical Overview<br/>
...
I want create NCX file for a Kindle book which must contain details as follows:
<navPoint id="n1" playOrder="1">
<navLabel>
<text>Multimedia Implementation</text>
</navLabel>
<content src="final/main.html"/>
</navPoint>
<navPoint id="n2" playOrder="2">
<navLabel>
<text>Table of Contents</text>
</navLabel>
<content src="final/toc.html"/>
</navPoint>
<navPoint id="n3" playOrder="3">
<navLabel>
<text>About the Author</text>
</navLabel>
<content src="final/pref01.html"/>
</navPoint>
...
I'm using Notepad++: is it possible automate this process with regular expression?
You cannot do everything using regex.. you can split the problem into two parts..
generate strings like <navPoint id="n1" playOrder="1"> using program logic (increment variable)
remaining you can do with regex
Use the following regex to match:
<a\shref="([^"]*)">([^<]*)<\/a><br\/>
And replace with:
(generated string)<navLabel>\n<text>\2</text>\n<content src="\1"/>\n</navPoint>
See DEMO
Yes, it is possibly to replace the links with <navpoint> tags. The only thing I found no solution for is the incremental numbering of the <navpoint> attributes id and playOrder...
The following regex will do most of the work:
/^<a[^>]*href="([^"]+)"[^>]*([^<]+).*$/gm
substitute with:
<navpoint id="n" playOrder="">\n<navLabel><text>$2</text></navLabel>\n<content src="$1" />\n</navpoint>\n
Regex details
/^<a .. only parse lines that start with an `<a` tag
.*href=" .. find the first occurance of `href="`
([^"]+) .. capture the text and stop when a " is found
"[^>]*> .. find the end of the <a> tag
([^<]+) .. capture the text and stop when a < is found (i.e. the </a> tag)
.*$/ .. continue to end of the line
gm .. search the whole string and parse each line individually
More detailled (but also more confusing) explanation is here:
https://regex101.com/r/gA0yJ2/1
This link also demonstrates how the regex is working. You can test changes there if you like
I create HTML documents from a rst-formated text, with the help of Sphinx. I need to display some Japanese words with furiganas (=small characters above the words), something like that :
I'd like to produce HTML displaying furiganas thanks to the < ruby > tag.
I can't figure out how to get this result. I tried to:
insert raw HTML code with the .. raw:: html directive but it breaks my line into several paragraphs.
use the :superscript: directive but the text in furigana is written beside the text, not above.
use the :role: directive to create a link between the text and a CSS class of my own. But the :role: directive can only be applied to a segment of text, not to TWO segments as required by the furiganas (=text + text above it).
Any idea to help me ?
As long as I know, there's no simple way to get the expected result.
For a specific project, I choosed not to generate the furiganas with the help of Sphinx but to modify the .html files afterwards. See the add_ons/add_furiganas.py script and the result here. Yes, it's a quick-and-dirty trick :(
I've started using Sublime Text 2, and its community of plugins, as my Dreamweaver replacement (thank the Gods). I love Sublime and clearly won't realize many of its features for months or years to come, but there's a simple setting I've had trouble figuring out.
I've used BBedit lots in the past. One feature I'm very attached to is the ability to "reverse" indent lines when soft-wrapped, such that line wrapping looks like this:
Text text blah blah blah blah long enough to wrap
to a new line blah whenever soft wrap happens it
reverse-indents like this.
Here's a new line with no indent.
Maybe I shouldn't be so married to a seemingly minor feature, but I find it much easier to read code when it's not possible to confuse the beginning of a line with "tailings" of a long line. Does anyone know how to do this in Sublime?
After further use, I think I've figured this out. Apparently Sublime's default (and only) behavior is to reverse-indent code lines, but leave html lines flush. So when I'm editing a PHP/HTML document, my wrapped lines will reverse-indent about half the time, depending on whether I'm in an tag or in a fragment at that line break.
The effect on my code is something like this:
<!-- Wrapped HTML doesn't reverse indent -->
<a href='long_link_that_causes_lines_to_wrap' other_attribute='
jquery_thing_that_makes_lines_wrap'>something</a>
...
<!-- Wrapped PHP snippets do reverse indent -->
<? echo date('M jS', strtotime('some_interpolated_formatting_string',
$some_variable_expression)); ?>
Sublime uses JSON files to store your preferences. The default file lists the settings that it uses by default, and you can override them by adding them to your user file.
The preference that controls hanging indent is word_wrap:
// Disables horizontal scrolling if enabled.
// May be set to true, false, or "auto", where it will be disabled for
// source code, and otherwise enabled.
"word_wrap": "auto",
As shown above, the default value is auto which only wraps lines that are not considered source code. To get hanging indent on all lines in a file, you need to set it to true in your user preferences file:
"word_wrap": true,
It's been a while since I've had to do any HTML-like code in Vim, but recently I came across this again. Say I'm writing some simple HTML:
<html><head><title>This is a title</title></head></html>
How do I write those closing tags for title, head and html down quickly? I feel like I'm missing some really simple way here that does not involve me going through writing them all down one by one.
Of course I can use CtrlP to autocomplete the individual tag names but what gets me on my laptop keyboard is actually getting the brackets and slash right.
I find using the xmledit plugin pretty useful. it adds two pieces of functionality:
When you open a tag (e.g. type <p>), it expands the tag as soon as you type the closing > into <p></p> and places the cursor inside the tag in insert mode.
If you then immediately type another > (e.g. you type <p>>), it expands that into
<p>
</p>
and places the cursor inside the tag, indented once, in insert mode.
The xml vim plugin adds code folding and nested tag matching to these features.
Of course, you don't have to worry about closing tags at all if you write your HTML content in Markdown and use %! to filter your Vim buffer through the Markdown processor of your choice :)
I like minimal things,
imap ,/ </<C-X><C-O>
I find it more convinient to make vim write both opening and closing tag for me, instead of just the closing one. You can use excellent ragtag plugin by Tim Pope. Usage looks like this (let | mark cursor position)
you type:
span|
press CTRL+x SPACE
and you get
<span>|</span>
You can also use CTRL+x ENTER instead of CTRL+x SPACE, and you get
<span>
|
</span>
Ragtag can do more than just it (eg. insert <%= stuff around this %> or DOCTYPE). You probably want to check out other plugins by author of ragtag, especially surround.
Check this out..
closetag.vim
Functions and mappings to close open HTML/XML tags
https://www.vim.org/scripts/script.php?script_id=13
I use something similar.
If you're doing anything elaborate, sparkup is very good.
An example from their site:
ul > li.item-$*3 expands to:
<ul>
<li class="item-1"></li>
<li class="item-2"></li>
<li class="item-3"></li>
</ul>
with a <C-e>.
To do the example given in the question,
html > head > title{This is a title}
yields
<html>
<head>
<title>This is a title</title>
</head>
</html>
There is also a zencoding vim plugin: https://github.com/mattn/zencoding-vim
tutorial: https://github.com/mattn/zencoding-vim/blob/master/TUTORIAL
Update: this now called Emmet: http://emmet.io/
An excerpt from the tutorial:
1. Expand Abbreviation
Type abbreviation as 'div>p#foo$*3>a' and type '<c-y>,'.
---------------------
<div>
<p id="foo1">
</p>
<p id="foo2">
</p>
<p id="foo3">
</p>
</div>
---------------------
2. Wrap with Abbreviation
Write as below.
---------------------
test1
test2
test3
---------------------
Then do visual select(line wize) and type '<c-y>,'.
If you request 'Tag:', then type 'ul>li*'.
---------------------
<ul>
<li>test1</li>
<li>test2</li>
<li>test3</li>
</ul>
---------------------
...
12. Make anchor from URL
Move cursor to URL
---------------------
http://www.google.com/
---------------------
Type '<c-y>a'
---------------------
Google
---------------------
Mapping
I like to have my block tags (as opposed to inline) closed immediately and with as simple a shortcut as possible (I like to avoid special keys like CTRL where possible, though I do use closetag.vim to close my inline tags.) I like to use this shortcut when starting blocks of tags (thanks to #kimilhee; this is a take-off of his answer):
inoremap ><Tab> ><Esc>F<lyt>o</<C-r>"><Esc>O<Space>
Sample usage
Type—
<p>[Tab]
Result—
<p>
|
</p>
where | indicates cursor position.
Explanation
inoremap means create the mapping in insert mode
><Tab> means a closing angle brackets and a tab character; this is what is matched
><Esc> means end the first tag and escape from insert into normal mode
F< means find the last opening angle bracket
l means move the cursor right one (don't copy the opening angle bracket)
yt> means yank from cursor position to up until before the next closing angle bracket (i.e. copy tags contents)
o</ means start new line in insert mode and add an opening angle bracket and slash
<C-r>" means paste in insert mode from the default register (")
><Esc> means close the closing tag and escape from insert mode
O<Space> means start a new line in insert mode above the cursor and insert a space
Check out vim-closetag
It's a really simple script (also available as a vundle plugin) that closes (X)HTML tags for you. From it's README:
If this is the current content:
<table|
Now you press >, the content will be:
<table>|</table>
And now if you press > again, the content will be:
<table>
|
</table>
Note: | is the cursor here
Here is yet another simple solution based on easily foundable Web writing:
Auto closing an HTML tag
:iabbrev </ </<C-X><C-O>
Turning completion on
autocmd FileType xml set omnifunc=xmlcomplete#CompleteTags
allml (now Ragtag ) and Omni-completion ( <C-X><C-O> )
doesn't work in a file like .py or .java.
if you want to close tag automatically in those file,
you can map like this.
imap <C-j> <ESC>F<lyt>$a</^R">
( ^R is Contrl+R : you can type like this Control+v and then Control+r )
(| is cursor position )
now if you type..
<p>abcde|
and type ^j
then it close the tag like this..
<p>abcde</p>|
Building off of the excellent answer by #KeithPinson (sorry, not enough reputation points to comment on your answer yet), this alternative will prevent the autocomplete from copying anything extra that might be inside the html tag (e.g. classes, ids, etc...) but should not be copied to the closing tag.
UPDATE I have updated my response to work with filename.html.erb files.
I noticed my original response didn't work in files commonly used in Rails views, like some_file.html.erb when I was using embedded ruby (e.g. <p>Year: <%= #year %><p>). The code below will work with .html.erb files.
inoremap ><Tab> ><Esc>?<[a-z]<CR>lyiwo</<C-r>"><Esc>O
Sample usage
Type:
<div class="foo">[Tab]
Result:
<div class="foo">
|
<div>
where | indicates cursor position
And as an example of adding the closing tag inline instead of block style:
inoremap ><Tab> ><Esc>?<[a-z]<CR>lyiwh/[^%]><CR>la</<C-r>"><Esc>F<i
Sample usage
Type:
<div class="foo">[Tab]
Result:
<div class="foo">|<div>
where | indicates cursor position
It's true that both of the above examples rely on >[Tab] to signal a closing tag (meaning you would have to choose either inline or block style). Personally, I use the block-style with >[Tab] and the inline-style with >>.