I have got a little problem with actions in zabbix and maybe you could help me to resolve this one.
I already have action whitch sends me email messages if any trigger changed status from OK to problem, but it's a lot of mesaages all day. I want to modify that action to send messages only if the trigger is in problem status for example for 10 minutes. I know how to set trigger to change status after 5 fails (for example) but that does not solve my problem.
Thanks for your answers.
If you configure the default operation step duration of 60 seconds and tell it to send the message on the 11th step, then Zabbix will send the email if the problem has been active for 10 minutes, like so:
Also, you might wish to see Zabbix documentation on escalations.
Related
I'm having issue getting answers from a Google Coud Function going through ESPv2.
Every time I request it, I get a response 15 seconds later with a status code of 504.
My function take between 30 to 45 seconds.
In the logs the functions correctly and answer back after 35 seconds.
Is there a way to increase the timeout in ESPv2 ?
Thanks
For anyone else having this issue, in the openapi-functions.yaml under the x-google-backend you should had the attribut deadline and set it to whatever value in seconds you want.
Here is the hidden documentation https://cloud.google.com/endpoints/docs/openapi/openapi-extensions#deadline
Issue related: https://github.com/GoogleCloudPlatform/esp-v2/issues/4
Depending on the documentation you used to secure the endpoints of your Cloud Function’s with ESPv2, this should be possible. If you are using Cloud Run to host your ESPv2, a 504 error is sent when a request exceeds its request timeout limit. The request timeout limit is a setting that specifies the time within which a response must be returned before sending a 504 response. You can change this value by going in your “Cloud Run” tab, selecting your ESPv2 service, selecting “Edit & Deploy new Revision”, scrolling down to the capacity section and setting the time in milliseconds. This is some documentation that could prove helpful when working with the topics discussed.
I have created a URL monitor to check the availability of website.I kept all values as it is in monitor tab and added host( http://abcd.xyz.org ). I scheduled it for every 10 minutes in schedule tab. In Measure tab I put the Lower sever value of HostReachable measure to 0.
I created incident , added HostReachable measure and put its Aggregation to last value. Evaluation time frame is 1 minutes.In Action tab I put my email for notification.
Now after every 10 minutes I started getting email even I browsed the website and it's working fine. Couldn't understand if website loading fine then why incidents occurs.
Email message:
Violations
HostReachable: STG URL Monitor#abcd.xyz.org: Was 0.00 but should be higher than 0.00.
Latest logs given below:
2016-08-17 15:42:33 INFO [UrlMonitor#STG URL Monitor_0] Previous message was repeated 1 times.
2016-08-17 15:42:33 INFO [UrlMonitor#STG URL Monitor_0] Executing method: GET, URI: http://abcd.xyz.org:80/
Thanks
This could have to do with the evaluation timeframe of your Incident. If your monitor is scheduled to run every 10 minutes but your evaluation timeframe is 1 minute it means that you have 9 evaluations where there is "no data".
We typically recommend to align the monitor execution with the Incident. Can you give that a try?
Also - I typically chart these measures to see which values the monitor produces in which timeinterval. this is an easy visual verification check to make sure that e.g: the monitor works correctly and delivers data. Can you do that?
I also wanted to say that we have a very good Dynatrace Online Community and Discussion forum # http://answers.dynatrace.com. You might want to try to post future questions there as there are 100k+ Dynatrace users active on that community
Andi
I have a senario that has been causing me issues for the last few weeks now. I currently have a "homepage" that populates with data from a controller with sports stats. This data comes from a service that is also used for the individuals pages for this sports stats.
For instance a user is able to click one of the listings on the home page and get a detailed list of that particualar entry with a state change from sports.com to sports.com/id/sport
I do this by taking the id from the home service and pass that through the paramenters within the state for the details page. From here I use that same service with the #id as a paramenter in order to get the details for that page (using $stateParams.id).
Normally that would work fine, but here is the problem. Sometimes when hitting the details page the service fires off the get request before the $stateParams.id is availibe and I end up with an error in my request. So instead of /json.php?detail=id im getting /json.php?detail=
For a cheap fix I now have the search query waiting on a timeout for 800ms in order to give the state time to resolve the $stateParams.id and then finally send out the request. My question is, what is a better way to do this? Is this something experienced often? It seems like in all my time with angular I haven't run into this situation so I'm a bit at a lost. Thanks
I have this scenario in my mind:
A user call is connected to support line, if the support team will not pick up within 30 seconds, the call will be forwarded to another number which is a voice mail.
I have tried consultation mode with no success, because I get unsupported error. Now I am trying the simple recommended scenario using leg Setup and call info.
In a nutshell, I have placed a call and support team is already ringing, nobody picks up and 30 seconds is passed, now I want to redirect the call using the following commands:
set VoiceMail 7777
set callInfo(alertTime) 40
set callInfo(originationNum) 83382992
set callInfo(mode) "ROTARY"
set callInfo(rerouteMode) "REDIRECT_ROTARY"
leg setup $VoiceMail callInfo leg_incoming
but when run, this returns an error stating "CallSetup already active on leg"
any help on that? if I disconnect the leg using "leg disconnect leg_incoming" the call is closed (I think)
Thanks
I have an html form which inserts data into a database. I just built it.. it's very basic, as I'm just doing this to learn. In doing this, I see that I can hit the back browser button and post again.. and again.. and again.. and it keeps writing to the db.
I've seen sites where I try to resubmit info and it tells me I must wait 60 seconds (or whatever). Is this the preferred method to solve this problem? If so, how does one go about implementing it?
Or maybe you would handle it a different way?
When you insert a row, store the submission time in the table, or in the user's session.
Whenever you process the form, compare that time to the current time. If it's within 60 seconds, display an error instead of inserting a row.
There are two methods :
i) Simple client side javascript:
Store the time of last event in a javascript variable,
when the user does the event again , send an alert message about timing.
( This method can be fooled though by users knowing javascript )
ii) Store the time of last event in your database at backend when the form post is done. When the same form post is done again, check for the time, if it is allowed, do the processing, else reply with a message about the timing.