I installed SSRS on my computer with the file SSDTBI_x86_ENU.exe. I started to create a report server project which contain tow .rdl file. Now I want to deploy it so I can see my reports in the browser. When I click the start button Visual studio give me an error and say that I have to specify a valid URL. So I went to reporting services configuration manager. My problem is when I enter my server name it says invalid namespace!!
Despite taking -2 for this question, I will answer it because I resolve it and hope that will help somebody someday. It is a problem connected to the version of SQL server express with tools. It didn't allow the deployement of rapports. So I uninstall it and install sql server express with advanced services and every thing magically worked.
Related
I've got this error when I tried to deploy SSRS report in Visual Studio.
(DAX 2012 kernel 6.0.1108.6510 app 6.0.1108.670 solution 6.1.1108.670)
Error 1 A call to the Microsoft Dynamics AX SRSFrameworkService service failed. A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond 10.43.6.57:8201. C:\Program Files (x86)\MSBuild\Microsoft\DynamicsTools\Microsoft.Dynamics.Framework.Design.Reporting.Modeling.targets 466
10.43.6.57:8201 is old address new should be 10.43.6.91:8201
Where I can change it?
In AX form SSRSServerFarm address is new:(NLDDAXDBS02TR, http://NLDDAXDBS02TR/Reports, 01#NLDDAXDBS02TR)
I run Visual Studio like this "C:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\IDE\devenv.exe" /AxConfig "c:\Users\Username\Desktop\DEV.axc" with correct config file
in axc file I don't have 10.43.6.57 or old dns NLDDAXDBS01T
I scanned and replaced values in registry on client and server machine, checked all files on client and server machine, checked all values in database.
Also restarted AOSes, SSRS service, and client RDP session.
Microsoft Dynamics AX 2012 Configuration and perform a Refresh Configuration didn't help
Full CIL Compilation, Deactivate BIServices, Activate BIServices also didn't help
Running Visual Studio as Admin - same result
nslookup says: NLDDAXDBS01T - 10.43.6.57 NLDDAXDBS02TR - 10.43.6.91
System Administration > Setup > Business intelligence > Report Servers is correct because i tried to deploy from another rdp server and it works fine
Are you certain the default report server is setup correctly in Ax?
Found under:
System Administration > Setup > Business intelligence > Report
Servers
Check your business connector configuration to make sure it's connecting to the right environment, see https://technet.microsoft.com/en-us/library/aa569654.aspx
I think Visual Studio deploys to AX based on that business connector AXC, so if that's pointed to an incorrect environment that has the "old" SSRS setup, it would explain your issue.
I got this problem one time due to multiple AOS and SSRS instance, or you might stop AOS service while user still using.
First, you need to make sure Report servers configuration point correctly to SSRS instance.
Then, stop all AOS service, go to reporting service login with correct instance and check everything again.
Then, perform full compilation using AXbuild.exe , Full CIL.
Start AOS service and check.
Let us know result.
I have a problem. This co-worker, whenever they open a BIDS project it gives her an error message:
...cannot be opened because its project type (.rptproj) is not
supported by this version of the application.
However, if I remote onto the computer using my login, it opens stuff just fine. The thing is, it was working for them for about 8-9 months. It just 'randomly' started doing this today. It also gives a similar error when creating new report projects.
Do you have an idea what the issue might be? I'm thinking maybe it's a configuration in the user profile? I mean, the computer obviously can open it up- just not for them. Has anyone experienced this and resolved it?
We are using the BIDS suite that comes with SQL Server. It is VS2008, we are running SQL Server 2008 R2.
Thanks in advance.
From Solved: project type (.rptproj) is not supported by this version of the application:
Install "Business Intelligence Development Studio" from the SQL Server 2008 installer.
See Business Intelligence Development Studio 2008 installation for more information on the installation.
I have difficulties connecting to my MS SQL Server and I can't find tutorial or answer how to do this, even though I think this should be something pretty standard.
My current setup is this - I have freshly new Installed Visual Studio 2010 and followed Beth Massi's article Step-by-Step: Installing SQL Server Management Studio 2008 Express after Visual Studio 2010 : http://blogs.msdn.com/b/bethmassi/archive/2011/02/18/step-by-step-installing-sql-server-management-studio-2008-express-after-visual-studio-2010.aspx
But I'm not able to connect to a SQL Server. In my Configuration Tools\SQL Server Configuration Manager I see this when I open it :
I set to Enable all TCP\IP and Named Pipes (Just saw that this may be a problem) and in the properties of the SQL Server (SQLEXPRESS) from Services I see this:
I also see in the Log On tab this :
some sort of password (not entered by me) it seems to be something default, but since I'm not sure where the problem is I try to show everything I think may have something to do with solving my problem.
At the end I tried different options to connect to my SQL Server form the Management Studio I ended up with this:
As you see I get an error (included in order to be able to read it). I read the the machine name may be required so my User Account name is Xman and my machine's name is Xman-PC. Eveh though my printscreen image is not from this try I made an attempt to connect to the Server with XMAN-PC\SQLEXPRESS but again - no success.\
Could you point me to a good tutorial on how to connect to a MS SQL Server (I can't believe there's nothing that explains in simple steps what you need to do to connect to a server) or could you tell me how to set-up my configurations so I actually can start to work with databases?
P.S
Forgot to mention in Command Prompyt - sqlcmd command also returns error - Could not open SQL connection.
P.S
Finally I managed to connect using Windows Authentication and (local)\sqlexpress for ServerName. Which at least means that everything is working. But now even more I would like to know how to connect using SQL Server Authentication. It must be something default as it was for Windows Authentication?!
Looks like you've done the hard work - last step will be turning on SQL Server Authentication.
Since you installed with the default values, only Windows Authentication is allowed; you need to set it to SQL Server and Windows Authentication mode. You can do this through Management Studio through the instance Properties -> Security.
See this link for full details: Change Server Authentication Mode.
I'm trying to install the SSRS data connector for my CRM4 implementation.
I'm using the Method 2: Modify the Install-config.xml file from this page. But keep getting the same error message:
Unable to validate SQL Server Reporting Services Report Server
installation. Please check that it is correctly installed on the local
machine.
I've added the following to my XML file.
<reportserverurl>http://SSRS-Server/Reportserver$MYORG_MSCRM</reportserverurl>
<instancename>MYORG_MSCRM</instancename>
Anyone know what is still wrong?
I tried several instance names but they all don't work either.
I can access my SSRS server by going to http://SSRS-Server/Reports and it will give a list of all services running there.
Any help would be much appreciated.
You may need to post more details regarding this issue:
1) The 2nd method described in this link : here is used when the Reporting Server database is installed using the SQL Server named instance. Are you installing the Reporting Server database in the default instance or named instance ?
2) If you are using default instance, you might not need to use custom XML, you can just run the installer without requiring the input XML file.
3) What is the architecture of your CRM implementation ? is the CRM Application, SQL server and Reporting Server resided in the same server ? or different server ?
Hope this helps.
I realise this is a really old article however I wanted to post the resolution I found to work as I have spent the past 3 days trying to resolve this issue! I created an account just to post this.
I was having the same problem as the original article. I had SSRS 2008 installed on a server, CRM (4.0!!!) on a different server and SQL 2008 on a different server again. When all permission issues were resolved and ports were opened from the SSRS server to the SQL server, I was still having problems getting the SetupSrsDataConnector.exe to see the locally installed instance of SSRS2008 (Not R2).
I found the resolution to the issue in this article:
https://community.dynamics.com/crm/b/pabloperalta/archive/2011/07/12/unable-to-validate-sql-server-reporting-services-report-server-installation-error-while-installing-srs-data-connector
Effectively the problem I was having is that my copy of the SRS Connector installation files were old and needed updating, however my server did not have internet connectivity. In the link above, it gives you a download location to get a .mps file which contains the updates for the SRS Connector.
You need to download this .mps file and then run the installation via command prompt with a customised install-config.xml file, which specifies the SSRS ReportServer URL and the SSRS Instance Name in a custom tag (what you named the SSRS instance when you installed it) and another custom tag for <Patch update="true">C:\Path to the .msp file< /Patch>
This was my installation command:
"D:\Stage\SRSDataConnector\SetupSrsDataConnector.exe" /CONFIG "D:\Stage\SRSDataConnectorUpdates\install-config.xml"
I realize that this question has been asked and has been answered here but I am having problems with the slip stream approach and I'm hoping someone else has run into it. I've tried downloading the newest installation guide but the help file appears to be corrupt as it won't open any of the pages so I'm a bit in the dark here.
I rigorously followed the TFS SP 1 slipstream installation instructions but I am running into an error coded TF220059. The error explicitly states:
TF220059: An error occurred while the Setup program was querying the installation settings for Team Foundation Server. For more information about this error, see the installation logs. For more information about the installation logs, see "Troubleshooting Installation for Team Foundation" in the Team Foundation Installation Guide.
which has me confused because as far as I can tell, no one else ran into this while slipstreaming. The results from the error log can be found here. It's claiming that the accounts aren't specified but I created them as specified in this TFS install guide. It is a single server install so there is not a domain controller involved.
Any help would be greatly appreciated, I've been banging my head against the desk over this. Thanks!
EDIT: after a bit of searching, I've found that others have ran into this problem when reporting services aren't installed. Is this required?
To open the installation guide, try right clicking on the downloaded .chm file, click Properties and then press "Unblock". If you then re-open the file, the content should appear.
Regarding SQL Server Reporting Services, yet it is required. If you download the latest version of the TFS Install guide from here:
http://www.microsoft.com/downloads/details.aspx?FamilyID=FF12844F-398C-4FE9-8B0D-9E84181D9923&displaylang=en
Unblock the file once downloaded, and then take a look at the section for installing SQL Server 2008 it will take you through how to get SQL set up in the way that TFS requires. TFS needs it's pre-requisites to be installed in very particular ways (such as IIS and SQL Server), so it pays to closely follow the install guide to ensure the pre-requisites are installed as required.
Good luck.