Related
While installing MySQL 5.7 on centos7, I am struggling with the data directory initialization step:
bin/mysqld --initialize --user=mysql
I am getting an error as
bin/mysqld:Error on realpath on 'var\lib\mysql-files'
Failed to access directory for --secure-file-priv. Please make sure that directory exists and is accessible by MYSQL server.Supplied value : /var/lib/mysql-files
.
Please suggest.
As described in the MySQL documentation,
/var/lib/mysql-files is the (default) directory where mysql allows import/export operations to work only with files, and the directory MUST exist.
You could try either:
Make sure the directory exists and give access to mysql
sudo mkdir -p /var/lib/mysql-files
sudo chown -R mysql:mysql /var/lib/mysql-files
sudo chmod -R 770 /var/lib/mysql-files
Or:
Disable this option from my.cnf
I'm attempting to edit my my.cnf file to allow remote access to mysql (by changing the bind-address). However, I'm getting a "Error writing my.cnf: Permission denied" error when I try to save (using pico through SSH).
Running $ lsattr my.cnf returns ---------------- my.cnf
What do I need to do to be able to edit this file?
Thanks!
You need to set the file permission as readable and writable.
sudo chmod 644 my.cnf
sudo nano my.cnf
sudo chmod 644 my.cnf
sudo pico my.cnf
Try to edit it as root.
Or look for at the file owner and file right with an ls -a.
Ok, I've searched all over and have spent quite a bit of my time installing, uninstalling, trying various option but without success.
I'm on Mac OS X Lion (10.7.3) and am trying to setup a Python, MySQL.
I successfully installed Python and MySQL via HomeBrew.
Python works great.
After MySQL Installation, I followed the first 2 steps - unset and the mysql_install_db commands.
Now, when I try to start mysql "mysql.server start", I get the following error
ERROR! The server quit without updating PID file (/usr/local/var/mysql/Brajeshwar.local.pid).
Brajeshwar is my username on my machine.
I found that it was a permissions issue with the mysql folder.
chmod -R 777 /usr/local/var/mysql/
solved it for me.
EDIT 2012/09/18:
As pointed out by Kane, make sure the mysql database is properly set up before doing anything else. See “PID error on mysql.server start?” for more info.
Original answer kept for history's sake:
It most likely is a permissions issue. Check /usr/local/var/mysql/*.err. Mine said:
120314 16:30:14 InnoDB: Operating system error number 13 in a file operation.
InnoDB: The error means mysqld does not have the access rights to
InnoDB: the directory.
InnoDB: File name ./ibdata1
InnoDB: File operation call: 'open'.
InnoDB: Cannot continue operation.
120314 16:30:14 mysqld_safe mysqld from pid file /usr/local/var/mysql/janmoesen.local.pid ended
I also had to do this:
sudo chown _mysql /usr/local/var/mysql/*
I ended up with completely reinstalling of mysql, and it finally worked out.
WARNING This will remove all of your databases, so make sure to save dumps first.
brew remove mysql
brew cleanup
launchctl unload -w ~/Library/LaunchAgents/homebrew.mxcl.mysql.plist
rm ~/Library/LaunchAgents/homebrew.mxcl.mysql.plist
sudo rm -rf /usr/local/var/mysql
brew install mysql
mysqld --initialize --explicit_defaults_for_timestamp
mysql.server start # no sudo!
I had this issue on mac 10.10.5 Yosemite
What I did to solve this
cd /usr/local/var/mysql
sudo rm *.err && sudo rm *.pid
sudo reboot
sudo mysql.server start
I had the same issue on OS X El Capitan, here's the terminal command sequence that fixed it for me.
Delete error files (you'll have to change the path depending on your setup)
sudo rm /usr/local/mysql/data/*.err
Find the info for the mysql process that's still running and kill it:
ps -A | grep -m1 mysql | awk '{print $1}' | sudo xargs kill -9
Now restart MySQL:
/usr/local/mysql/support-files/mysql.server start
November, 2014: If you're getting this error on MySQL 5.6.x on Mac OS X Mavericks or Yosemite and want to use MySQL with PHP locally (/tmp/mysql.sock is where PHP PDO expects to find the sock file), here is what fixed it for me:
1) Uncomment the default homebrew config file lines and edit as below
$ sudo vi /usr/local/Cellar/mysql/5.6.21/my.cnf
...
basedir = /usr/local/Cellar/mysql/5.6.21
datadir = /usr/local/var/mysql
port = 3306
server_id = <UNIQUE_NUMBER_HERE_OR_LEAVE_COMMENTED_OUT>
socket = /tmp/mysql.sock
pid-file = /usr/local/var/mysql/[BOXNAME].local.pid
....
BOXNAME is what you have in your System Prefs -> Network as the unique id for your computer on the network.
2) Set permissions on all the files in the mysql datadir. These were all owned by [my_username]. MySQL is very picky about this and refuses to create the pid file unless it (the user _mysql) owns the directory.
$ sudo chown -R _mysql:mysql /usr/local/var/mysql
3) Start MySQL using the bash helper/wrapper script:
$ sudo mysql.server start
Starting MySQL
. SUCCESS!
Hope that helps. If the above doesn't work for you, try to run the mysqld_safe binary manually in the Cellar/mysql/VERSION_/bin/ directory and check what the settings are (if it runs)
sudo /usr/local/Cellar/mysql/5.6.12/bin/mysqld_safe &
If that runs, you can
ps aux | grep mysql
and see something like
[username] 6881 0.0 2.7 3081392 454836 ?? S 8:52AM 0:00.54 /usr/local/Cellar/mysql/5.6.21/bin/mysqld --basedir=/usr/local/Cellar/mysql/5.6.21 --datadir=/usr/local/var/mysql --plugin-dir=/usr/local/Cellar/mysql/5.6.21/lib/plugin --verbose --log-error=/usr/local/var/mysql/BOXNAME.local.err --pid-file=/usr/local/var/mysql/BOXNAME.local.pid
I'm not sure why that worked for me but it shows you where I got the my.cnf config file options from. You can also use the command line options to try to troubleshoot when starting mysqld manually.
If you do run manage to run MySQL server using mysqld_safe, you may have to do this to shut it down before trying the mysql.server bash helper. Resist the urge to kill -9 [PID] because you can corrupt your data.
mysqladmin -uroot shutdown
Good luck!
This worked for me:
sudo chmod -R 777 /usr/local/var/mysql/
sudo /usr/local/mysql/support-files/mysql.server start
This worked for me on 10.12.2 :
$ rm /usr/local/var/mysql/*.err
then
$ brew services restart mysql
If I remember correctly it is a permissions issue. Try to 'touch' and 'chmod' the pid file or the folder the file is held in.
My issue was that I started server as sudo once and then tried to restart as a local user.
Here mysql was not able to write to '.err' file owned by root.
I had to remove that file and restart the server:
sudo rm /usr/local/var/mysql/*.err
mysql.server start
Try this (OSX)
Step 1:
ps -aux | grep mysql
Then kill the 4 digits PID number
Step 2: kill 1965
Step 3: mysql.server start
Or having hard time to locate those PID numbers, try this below
Step 1 again: ps -aux | grep mysql
Step 2 again: killall
Step 3 again: mysql.server start
I’ve got a similar problem with MySQL on a Mac (Mac Os X Could not startup MySQL Server. Reason: 255 and also “ERROR! The server quit without updating PID file”). After a long trial and error process, finally in order to restore the file permissions, I’ve just do that:
launch the Disk Utilities.app
choose my drive on the left panel
click on the “Repair disk permissions” button
This did the trick for me. Hoping this can help someone else.
Find usr/local/var/mysql/your_computer_name.local.err file and understand the more information about error
Location : /usr/local/var/mysql/your_computer_name.local.err
It's probably problem with permissions
Find if mysql is running and kill it
ps -ef | grep mysql
kill -9 PID
where PID is second column value
2. check ownership of mysql
ls -laF /usr/local/var/mysql/
if it is owned by root, change it mysql or your user name
sudo chown -R mysql /usr/local/var/mysql/
For me it worked with:
unset TMPDIR
mysql_install_db --user=`whoami` --basedir="$(brew --prefix mariadb)" --datadir=/usr/local/var/mysql --tmpdir=/tmp
What worked for me was:
Go to your mysql installation directory
sudo chmod -R 777 data
Then go back one directory
cd support-files/
sudo ./mysql.server start
After that the server started running.
But the problem with this method is that I have to repeat this every time I want to start the mysql now. Don't know why it started behaving like this suddenly.
I had this problem on Linux, but the cause is relevant to any mysql installation. In my case, the server was crashing before startup was complete and the pid file updated. The error messages were seen when starting up mysqld directly instead of via "service mysql start".
In my case, the cause was the partition where the log files were located being full. Removing log files permitted mysql to start again. To test for this issue, go to the location of your mysql activity logs, and do df ..
If you have upgraded your mysql installation to 8.x, check if your previous version is supported for upgradation.
If not, mysql will not work! Uninstall your mysql along with all configuration files in /usr/local/var/mysql (remove the whole folder). Reinstall mysql.
NOTE: reinstalling might lead to loss of data.
Please check the log , you will get more detailed information .
Use the below command to tail the error log
tail -100 /usr/local/var/mysql/<user_name>.local.err
For me , one of the directory is missing , once created the server has started .
The key takeaway is to check the .err file, by default on Mac OSX it's in /usr/local/var/mysql.
That log filed revealed to me that I had to delete the following files:
ibdata1
ib_logfile0
ib_logfile1
Running MySQL with mysql.start worked successfully after that. Note that deleting those files will likely causes data loss.
sudo chmod -R 777 /usr/local/var/mysql/
works for me.
I had the same issue:
But the situation was, every time i try to enter:
/usr/local/mysql/support-files/mysql.server start
a file named localhost.pid is created instead of iMax0.local.pid which was stated in the error:
ERROR! The server quit without updating PID file (/usr/local/mysql/data/iMax0.local.pid).
Solution that works for me was copying localhost.pid and renaming it to iMax0.local.pid.
My solution on OSX El Capitan was:
sudo chmod ugo+w /tmp
It was broken suddenly.
The error was:
ERROR! The server quit without updating PID file
and the log showed:
Can't start server : Bind on unix socket: Permission denied
It might also be helpful to note, that under OSX there is no my.cnf file by default and not needed by default, which I did not know. Good luck!
$ sudo mysql.server restart
It works for me.
I had the similar issue. But the following commands saved me.
cd /usr/local/Cellar
sudo chown _mysql mysql
This is file permission problem.
Check disk permissions and repair.
Osx => Cmd+Space => Disk Utilty => Verify Disk Permissions.
Verify completed after Repair Disk Permissions.
mysql.server start command is worked succesfuly.
None of the answers worked for me. However, I simply did sudo mysql.server start and it worked nicely.
Also, for me, it did NOT show permissions issue in *.err file.
all solutions above doesn't work for me.
but they give me some clues to fix this error.
mysql.server start ----error The server quit without updating PID file
I installed mysql#5.7 on my macbook mojave with homebrew
brew install mysql#5.7
mysql error log located in /usr/local/var/mysql/IU.lan.err,there is one line in it:
Can't open and lock privilege tables: Table 'mysql.user' doesn't exist
after trying many posts in goole search engine,I turned to baidu
https://blog.csdn.net/xhool/article/details/52398042
inspired by this post,I found the solution:
rm /usr/local/var/mysql/*
mysqld --initialize
a random password for root user will be shown in bash.
but the command mysql -uroot -p[theRandomPassword] cant work.so I have to reset password.
create a init file with contents like this
SET PASSWORD FOR 'root'#'localhost' = PASSWORD('MyNewPass');
place it in any directory easy to find,such as Desktop
mysqld --init-file=[YourInitFile] &
many logs printed on your screen.
mysql -uroot -pMyNewPass
enjoy your high-version mysql!
Happened to me because I was actually switching from MariaDB to Mysql.
Switching back to MariaDB solved this.
I'm guessing the existing database wasn't compatible.
Solved this using sudo chown -R _mysql:_mysql /usr/local/var/mysql
Thanks to Matteo Alessani
This error may be actually being show because mysql is already started. Try to see the current status by:
mysql.server status
I am on a server that has afresh install on RHEL 5. I was able to install Apache and PHP just fine., but I am having serious trouble with my MySQL installation. I tried the following:
yum install mysql-server mysql
And didn't get any errors or conflicts. Then I tried to start mysql with the following commands:
chkconfig --levels 235 mysqld on
service mysqld start
And get Timeout error occurred trying to start MySQL Daemon.
I checked my logs and see this error:
[ERROR] Fatal error: Can't open and lock privilege tables: Table 'mysql.host' doesn't exist
I'm not sure where to go from here.
For reference I am using RHEL 5 and installed the latest versions of PHP 5 and Apache.
After chown and chgrp'ing /var/lib/mysql per the answer by #Bad Programmer, you may also have to execute the following command:
sudo mysql_install_db --user=mysql --ldata=/var/lib/mysql
Then restart your mysqld.
Uninstall mysql using yum remove mysql*
Recursively delete /usr/bin/mysql and /var/lib/mysql
Delete the file /etc/my.cnf.rmp
Use ps -e to check the processes to make sure mysql isn't still running.
Reboot server with reboot
Run yum install mysql-server. This also seems to install the mysql client as a dependency.
Give mysql ownership and group priveleges with:
chown -R mysql /var/lib/mysql
chgrp -R mysql /var/lib/mysql
Use service mysqld start to start MySQL Daemon.
I had this issue on arch linux as well. The issue was pacman installed the package in a different location than MySQL was expecting. I was able to fix the issue with this:
sudo mysql_install_db --user=mysql --basedir=/usr/ --ldata=/var/lib/mysql/
Hope this helps someone!
The root of my problem seemed to be selinux, which was turned on (enforcing)
automatically on OS install.
I wanted my mysql in /data.
After verifying that my.cnf had:
datadir=/data/mysql
(and leaving the socket at /var/lib/mysql)
I executed the command to turn off selinux for mysqld
(alternative is to turn it off completely):
setsebool -P mysqld_disable_trans=1
I ran the following commands:
> chown -R mysql .
> chgrp -R mysql .
> mysql_install_db --user=mysql
I started the mysql daemon and everything worked fine after that.
mysql_install_db –-user=mysql --ldata=/var/lib/mysql
Worked for me in Centos 7
initialize mysql before start on windows.
mysqld --initialize
When download mysql zip version, if run mysqld directly, you'll get this error:
2016-02-18T07:23:48.318481Z 0 [ERROR] Fatal error: Can't open and lock privilege tables: Table 'mysql.user' doesn't exist
2016-02-18T07:23:48.319482Z 0 [ERROR] Aborting
You have to run below command first:
mysqld --initialize
Make sure your data folder is empty before this command.
Just this command is enough to do the magic on centos 6.6
mysql_install_db
I just met the same problem with mysql 5.7 on OSX:
rm -rf {datadir}
mysqld --initialize --datadir {datadir}
mysqld --datadir {datadir}
If you move your datadir, you not only need to give the new datadir permissions, but you need to ensure all parent directories have permission.
I moved my datadir to a hard drive, mounted in Ubuntu as:
/media/*user*/Data/
and my datadir was Databases.
I had to set permissions to 771 to each of the media, user and Data directories:
sudo chmod 771 *DIR*
If this does not work, another way you can get mysql to work is to change user in /etc/mysql/my.cnf to root; though there are no doubt some issues with doing that from a security perspective.
For myself, I had to do:
yum remove mysql*
rm -rf /var/lib/mysql/
cp /etc/my.cnf ~/my.cnf.bkup
yum install -y mysql-server mysql-client
mysql_install_db
chown -R mysql:mysql /var/lib/mysql
chown -R mysql:mysql /var/log/mysql
service mysql start
Then I was able to get back into my databases and configure them again after I nuked them the first go around.
In my case the path of MySQL data folder had a special character "ç" and it make me get...
Fatal error: Can't open and lock privilege tables: Table 'mysql.host'
doesn't exist.
I'm have removed all special characters and everything works.
On CentOS EL 6 and perhaps on earlier versions there is one way to get into this same mess.
Install CentOS EL6 with a minimal installation. For example I used kickstart to install the following:
%packages
#core
acpid
bison
cmake
dhcp-common
flex
gcc
gcc-c++
git
libaio-devel
make
man
ncurses-devel
perl
ntp
ntpdate
pciutils
tar
tcpdump
wget
%end
You will find that one of the dependencies of the above list is mysql-libs. I found that my system has a default my.cnf in /etc and this contains:
[mysqld]
dataddir=/var/lib/mysql
socket=/var/lib/mysql/mysql.sock
user=mysql
# Disabling symbolic-links is recommended to prevent assorted security risks
symbolic-links=0
[mysqld_safe]
log-error=/var/log/mysqld.log
pid-file=/var/run/mysqld/mysqld.pid
When you build from the Generic Linux (Architecture Independent), Compressed TAR Archive your default data directory is /usr/local/mysql/data which conflicts with the /etc/my.cnf already present which defines datadir=/var/lib/mysql. Also the pid-file defined in the same file does not have permissions for the mysql user/group to write to it in /var/run/mysqld.
A quick remedy is to mv /etc/my.cnf /etc/my.cnf.old which should get your generic source procedure working.
Of course the experience is different of you use the source RPMs.
I had the same issue in trying to start the server and followed the "checked" solution.
But still had the problem. The issue was the my /etc/my.cnf file was not pointing to my
designated datadir as defined when I executed the mysql_install_db with --datadir defined. Once I updated this, the server started correctly.
If you have a server which used to happily run MySQL, but now gives this error, then an uninstall and re-install of MySQL is overkill.
In my case, the server died and took a few disk blocks with it. This affected a few files, including /var/lib/mysql/mysql/host.frm and /var/lib/mysql/mysql/proc.frm
Luckily, I could copy these from another server, and this got me past that table error.
I got similar error on overlayfs (overlay2) that is the default on Docker for Mac.
The error happens when starting mysql on the image, after creating a image with mysql.
2017-11-15T06:44:22.141481Z 0 [ERROR] Fatal error: Can't open and lock privilege tables: Table storage engine for 'user' doesn't have this option
Switching to "aufs" solved the issue.
(On Docker for Mac, the "daemon.json" can be edited by choosing "Preferences..." menu, and selecting "Daemon" tab, and selecting "Advanced" tab.)
/etc/docker/daemon.json :
{
"storage-driver" : "aufs",
"debug" : true,
"experimental" : true
}
Ref:
https://github.com/moby/moby/issues/35503
https://qiita.com/Hige-Moja/items/7b1208f16997e2aa9028
In Windows run the following commands in the command prompt as adminstrator
Step 1:
mysql_install_db.exe
Step 2:
mysqld --initialize
Step 3:
mysqld --console
Step 4:
In windows
Step 4:
mysqladmin -u root password "XXXXXXX"
Step 5:
mysql -u root -p
My case on Ubuntu 14.04.2 LTS was similar to others with my.cnf, but for me the cause was a ~/.my.cnf that was leftover from a previous installation. After deleting that file and purging/re-installing mysql-server, it worked fine.
I am trying to dump the contents of a table to a csv file using a MySQL SELECT INTO OUTFILE statement. If I do:
SELECT column1, column2
INTO OUTFILE 'outfile.csv'
FIELDS TERMINATED BY ','
FROM table_name;
outfile.csv will be created on the server in the same directory this database's files are stored in.
However, when I change my query to:
SELECT column1, column2
INTO OUTFILE '/data/outfile.csv'
FIELDS TERMINATED BY ','
FROM table_name;
I get:
ERROR 1 (HY000): Can't create/write to file '/data/outfile.csv' (Errcode: 13)
Errcode 13 is a permissions error, but I get it even if I change ownership of /data to mysql:mysql and give it 777 permissions. MySQL is running as user "mysql".
Strangely I can create the file in /tmp, just not in any other directory I've tried, even with permissions set such that user mysql should be able to write to the directory.
This is MySQL 5.0.75 running on Ubuntu.
Which particular version of Ubuntu is this and is this Ubuntu Server Edition?
Recent Ubuntu Server Editions (such as 10.04) ship with AppArmor and MySQL's profile might be in enforcing mode by default. You can check this by executing sudo aa-status like so:
# sudo aa-status
5 profiles are loaded.
5 profiles are in enforce mode.
/usr/lib/connman/scripts/dhclient-script
/sbin/dhclient3
/usr/sbin/tcpdump
/usr/lib/NetworkManager/nm-dhcp-client.action
/usr/sbin/mysqld
0 profiles are in complain mode.
1 processes have profiles defined.
1 processes are in enforce mode :
/usr/sbin/mysqld (1089)
0 processes are in complain mode.
If mysqld is included in enforce mode, then it is the one probably denying the write. Entries would also be written in /var/log/messages when AppArmor blocks the writes/accesses. What you can do is edit /etc/apparmor.d/usr.sbin.mysqld and add /data/ and /data/* near the bottom like so:
...
/usr/sbin/mysqld {
...
/var/log/mysql/ r,
/var/log/mysql/* rw,
/var/run/mysqld/mysqld.pid w,
/var/run/mysqld/mysqld.sock w,
**/data/ r,
/data/* rw,**
}
And then make AppArmor reload the profiles.
# sudo /etc/init.d/apparmor reload
WARNING: the change above will allow MySQL to read and write to the /data directory. We hope you've already considered the security implications of this.
Ubuntu uses AppArmor and that is whats preventing you from accessing /data/. Fedora uses selinux and that would prevent this on a RHEL/Fedora/CentOS machine.
To modify AppArmor to allow MySQL to access /data/ do the follow:
sudo gedit /etc/apparmor.d/usr.sbin.mysqld
add this line anywhere in the list of directories:
/data/ rw,
then do a :
sudo /etc/init.d/apparmor restart
Another option is to disable AppArmor for mysql altogether, this is NOT RECOMMENDED:
sudo mv /etc/apparmor.d/usr.sbin.mysqld /etc/apparmor.d/disable/
Don't forget to restart apparmor:
sudo /etc/init.d/apparmor restart
I know you said that you tried already setting permissions to 777, but as I have an evidence that for me it was a permission issue I'm posting what I exactly run hoping it can help. Here is my experience:
tmp $ pwd
/Users/username/tmp
tmp $ mkdir bkptest
tmp $ mysqldump -u root -T bkptest bkptest
mysqldump: Got error: 1: Can't create/write to file '/Users/username/tmp/bkptest/people.txt' (Errcode: 13) when executing 'SELECT INTO OUTFILE'
tmp $ chmod a+rwx bkptest/
tmp $ mysqldump -u root -T bkptest bkptest
tmp $ ls bkptest/
people.sql people.txt
tmp $
MySQL is getting stupid here. It tries to create files under /tmp/data/.... So what you can do is the following:
mkdir /tmp/data
mount --bind /data /tmp/data
Then try your query. This worked for me after hours of debugging the issue.
You can do this :
mysql -u USERNAME --password=PASSWORD --database=DATABASE --execute='SELECT `FIELD`, `FIELD` FROM `TABLE` LIMIT 0, 10000 ' -X > file.xml
This problem has been bothering me for a long time. I noticed that this discussion does not point out the solution on RHEL/Fecora. I am using RHEL and I do not find the configuration files corresponding to AppArmer on Ubuntu, but I solved my problem by making EVERY directory in the directory PATH readable and accessible by mysql. For example, if you create a directory /tmp, the following two commands make SELECT INTO OUTFILE able to output the .sql AND .sql file
chown mysql:mysql /tmp
chmod a+rx /tmp
If you create a directory in your home directory /home/tom, you must do this for both /home and /home/tom.
Some things to try:
is the secure_file_priv system variable set? If it is, all files must be written to that directory.
ensure that the file does not exist - MySQL will only create new files, not overwrite existing ones.
I have same problem and I fixed this issue by following steps:
Operating system : ubuntu 12.04
lamp installed
suppose your directory to save output file is : /var/www/csv/
Execute following command on terminal and edit this file using gedit editor to add your directory to output file.
sudo gedit /etc/apparmor.d/usr.sbin.mysqld
now file would be opened in editor please add your directory there
/var/www/csv/* rw,
likewise I have added in my file, as following given image :
Execute next command to restart services :
sudo /etc/init.d/apparmor restart
For example I execute following query into phpmyadmin query builder to output data in csv file
SELECT colName1, colName2,colName3
INTO OUTFILE '/var/www/csv/OUTFILE.csv'
FIELDS TERMINATED BY ','
FROM tableName;
It successfully done and write all rows with selected columns into OUTPUT.csv file...
In my case, the solution was to make every directory in the directory path readable and accessible by mysql (chmod a+rx). The directory was still specified by its relative path in the command line.
chmod a+rx /tmp
chmod a+rx /tmp/migration
etc.
I just ran into this same problem. My issue was the directory that I was trying to dump into didn't have write permission for the mysqld process. The initial sql dump would write out but the write of the csv/txt file would fail. Looks like the sql dump runs as the current user and the conversion to csv/txt is run as the user that is running mysqld. So the directory needs write permissions for both users.
You need to provide an absolute path, not a relative path.
Provide the full path to the /data directory you are trying to write to.
Does Ubuntu use SELinux? Check to see if it's enabled and enforcing. /var/log/audit/audit.log may be helpul (if that's where Ubuntu sticks it -- that's the RHEL/Fedora location).
I had the same problem on a CentOs 6.7
In my case all permissions were set and still the error occured. The problem was that the SE Linux was in the mode "enforcing".
I switched it to "permissive" using the command sudo setenforce 0
Then everything worked out for me.