I have this query, it is giving me error
Operand Should contains one column. But i need two columns for now . Can anybody help me out
SELECT `business`.`id` AS business_id,
`business`.`name` AS business_name,
`business`.`address`,
`business`.`address2`,
`business`.`city`,
`business`.`state`,
`business`.`zipcode`,
`business`.`lat`,
`business`.`lon`,
`service`.`id` AS ser_id,
`service`.`name` AS service_name,
(SELECT price, `price_verified`.`comments`
FROM `price_verified`
LEFT JOIN `price`
ON `price_verified`.`price_id` = `price`.`id`
WHERE `price`.`service_id` = ser_id
AND `price_verified`.`status` = 1
ORDER BY `price_verified`.`date_verified` DESC
LIMIT 1)
FROM service
LEFT JOIN `business` ON `service`.`business_id` = `business`.`id`
WHERE `service`.`business_id` = 1
Thanks
AS the error message says you can only have one result column in your sub-query.
either you have to concatenate the sub query result or have two sub queries for each column.
like:
(SELECT concat(price,`price_verified`.`comments`) as result
FROM `price_verified` LEFT JOIN `price` ON `price_verified`.`price_id`= `price`.`id` \n\
WHERE `price`.`service_id`=ser_id AND `price_verified`.`status`= 1 ORDER BY `price_verified`.`date_verified` DESC LIMIT 1)
Related
I want to add a condition for the tbl_restaurant_featured_history.id column but I can't add that condition in where clause because It shows an error saying Unknown column 'featured' in 'where clause' and If I add a condition featured is not null in having clause It is returning 0 rows.
Below is the query before adding the condition
SELECT
DISTINCT(tbl_restaurant.id) as restaurant_id,
tbl_restaurant.name,
tbl_restaurant_featured_history.id as featured,
tbl_restaurant.min_order_amount,
tbl_restaurant.latitude as latitude,
tbl_restaurant.logo,
tbl_favourite_restaurant.id as is_fav,
tbl_restaurant.address as address,
IF(tbl_restaurant_timing.start_time <= '19:56:26' && tbl_restaurant.service = 'Available' && tbl_restaurant_timing.end_time >= '19:56:26', 'Open', 'Closed') AS availblity,
tbl_restaurant.longitude as longitude,
(
SELECT ROUND(AVG(tbl_rate_review.rate))
FROM tbl_rate_review
where tbl_rate_review.restaurant_id = tbl_restaurant.id
GROUP BY restaurant_id
) as avgrating,
(
SELECT ROUND(AVG(tbl_rate_review.rate), 2)
FROM tbl_rate_review
where tbl_rate_review.restaurant_id = tbl_restaurant.id
GROUP BY restaurant_id
) as rating,
111.045 * DEGREES(ACOS(COS(RADIANS(23.0266941)) * COS(RADIANS(latitude)) * COS(RADIANS(longitude) - RADIANS(72.6008731)) + SIN(RADIANS(23.0266941)) * SIN(RADIANS(latitude)))) AS distance_in_km
FROM tbl_restaurant
LEFT JOIN tbl_restaurant_featured_history ON tbl_restaurant_featured_history.restaurant_id = tbl_restaurant.id
LEFT JOIN tbl_restaurant_menu ON tbl_restaurant_menu.restaurant_id = tbl_restaurant.id AND tbl_restaurant_menu.status='Active'
LEFT JOIN tbl_favourite_restaurant ON tbl_favourite_restaurant.restaurant_id=tbl_restaurant.id AND tbl_favourite_restaurant.user_id=19
LEFT JOIN tbl_restaurant_timing ON tbl_restaurant_timing.restaurant_id = tbl_restaurant.id AND tbl_restaurant_timing.day = 'Saturday'
WHERE tbl_restaurant.status = 'Active'
HAVING distance_in_km <= 10
ORDER BY availblity DESC, distance_in_km ASC LIMIT 10, 10
And the output of this query
The query is poorly formated and hence rather hard to follow.
I can see this in the select clause:
tbl_restaurant_featured_history.id as featured
The where clause of a query just can't refer to an alias defined in the select clause. If you want to filter on this, then you need to use the column name (tbl_restaurant_featured_history.id) rather than the alias (featured):
where tbl_restaurant_featured_history.id is not null
The table tbl_restaurant_featured_history is LEFT joined to the table tbl_restaurant and this is why you get nulls in the results because some rows do not match the conditions of the ON clause that you have set.
If you want to add the condition:
tbl_restaurant_featured_history.id is not null
this means that you want only the matching rows and from your sample data I see that there is only 1 matching row.
In this case all you have to do is change the join to an INNER join:
.................................
FROM tbl_restaurant
INNER JOIN tbl_restaurant_featured_history ON tbl_restaurant_featured_history.restaurant_id = tbl_restaurant.id
.................................
This has to be a no brainer, but I am stumped. I'm used to using aggregate 'FIRST' in MsAccess, but MySql has no such thing.
Here is a simple table. I want to return the most recent record based on the date,
for each unique 'group ID'. I need the three records in yellow.
I was asked to add my full query. I tried one of the suggestions using the JOIN feature replacing 't' with the temp table name, but it failed to work. "Can't reopen table 't'"
The code is below. I know it's ugly, but it does return the correct data set.
I cleaned up the code a bit and added the JOIN code. Error: "Can't reopen table 't'"
enter code here
DROP TABLE IF EXISTS `tmpMaxLookupResults`;
create temporary table tmpMaxLookupResults
as
SELECT
REPORTS.dtmReportCompleted,
RESULTS.lngMainReport_ID, RESULTS.lngLocationGroupSub_ID
FROM
(tbl_010_040_ProcedureVsTest_Sub as ProcVsSub
INNER JOIN tbl_010_050_CheckLog_RESULTS as RESULTS
ON (ProcVsSub.lngLocationGroupSub_ID = RESULTS.lngLocationGroupSub_ID)
AND (ProcVsSub.lngProcedure_ID = RESULTS.lngProcedure_ID)
AND (ProcVsSub.lngItemizedTestList_ID = RESULTS.lngItemizedTestList_ID)
AND (ProcVsSub.strPasscodeAdmin = RESULTS.strPasscodeAdmin)
AND (ProcVsSub.strCFICode = RESULTS.strCFICode))
INNER JOIN
tbl_000_010_MAIN_REPORT_INFO as REPORTS ON (RESULTS.lngPCC_ID =
REPORTS.lngPCC_ID)
AND (RESULTS.lngProcedure_ID = REPORTS.lngProcedure_ID)
AND (RESULTS.lngMainReport_ID = REPORTS.idMainReport_ID)
AND (RESULTS.strPasscodeAdmin = REPORTS.strPasscodeAdmin)
AND (RESULTS.strCFICode = REPORTS.strCFICode)
WHERE
(((RESULTS.lngProcedure_ID) = 143)
AND ((RESULTS.dtmExpireDate) IS NOT NULL)
AND ((RESULTS.strCFICode) = 'ems'))
GROUP BY RESULTS.lngMainReport_ID, RESULTS.lngLocationGroupSub_ID
ORDER BY (REPORTS.dtmReportCompleted) DESC;
SELECT t.*
FROM tmpMaxLookupResults AS t
JOIN (
SELECT lngLocationGroupSub_ID,
MAX(dtmReportCompleted) AS max_date_completed
FROM tmpMaxLookupResults
GROUP BY lngLocationGroupSub_ID ) AS dt
ON dt.lngLocationGroupSub_ID = t.lngLocationGroupSub_ID AND
dt.max_date_completed = t.dtmReportCompleted
enter code here
Try this
SELECT
tn.*
FROM
tableName tn
RIGHT OUTER JOIN
(
SELECT
groupId, MAX(date_completed) as max_date_completed
FROM
tableName
GROUP BY
groupId
) AS gt
ON
(gt.max_date_completed = nt.date_completed AND gt.groupId = nt.groupId)
You can use the following SQL.
select * from table1 order by date_completed desc Limit 1;
Use Order By
SELECT *
FROM table_name
ORDER BY your_date_column_name
DESC
LIMIT 1
In a Derived Table, get the maximum date_completed value for every group_id.
Join this result-set back to the main table, in order to get the complete row corresponding to maximum date_completed value for every group_id
Try the following query:
SELECT t.*
FROM your_table_name AS t
JOIN (
SELECT group_id,
MAX(date_completed) AS max_date_completed
FROM your_table_name
GROUP BY group_id
) AS dt
ON dt.group_id = t.group_id AND
dt.max_date_completed = t.date_completed
I am attempting to count the number of rows from a given query. But count returns more rows than it should. What is happening?
This query returns only 1 row.
select *
from `opportunities`
inner join `companies` on `opportunities`.`company_id` = `companies`.`id`
left join `opportunityTags` on `opportunities`.`id` = `opportunityTags`.`opportunity_id`
where `opportunities`.`isPublished` = '1' and `opportunities`.`Company_id` = '1'
group by `opportunities`.`id` ;
This query returns that there are 3 rows.
select count(*) as aggregate
from `opportunities`
inner join `companies` on `opportunities`.`company_id` = `companies`.`id`
left join `opportunityTags` on `opportunities`.`id` = `opportunityTags`.`opportunity_id`
where `opportunities`.`isPublished` = '1' and `opportunities`.`Company_id` = '1'
group by `opportunities`.`id`;
When you select count(*) it is counting before the group by. You can probably (unfortunately my realm is SQL Server and I don't have a mySQL instance to test) fix this by using the over() function.
For example:
select count(*) over (partition by `opportunities`.`id`)
EDIT: Actually doesn't look like this is available in mySQL, my bad. How about just wrapping the whole thing in a new select statement? It's not the most elegant solution, but will give you the figure you're after.
Some sql query gives me the following result:
As you can see, it already has GROUP BY.
So what I need? I need to group it again (by treatment_name) and count rows for each group. See more details on screenshot.
Here is full query:
SELECT
treatment_summaries.*
FROM `treatment_summaries`
INNER JOIN
`treatments`
ON
`treatments`.`treatment_summary_id` = `treatment_summaries`.`id`
AND
(treatment <> '' and treatment is not null)
INNER JOIN
`treatment_reviews`
ON
`treatment_reviews`.`treatment_id` = `treatments`.`id`
INNER JOIN
`conditions_treatment_reviews`
ON
`conditions_treatment_reviews`.`treatment_review_id` = `treatment_reviews`.`id`
INNER JOIN
`conditions` ON `conditions`.`id` = `conditions_treatment_reviews`.`condition_id`
INNER JOIN `conditions_treatment_summaries` `conditions_treatment_summaries_join`
ON
`conditions_treatment_summaries_join`.`treatment_summary_id` = `treatment_summaries`.`id`
INNER JOIN `conditions` `conditions_treatment_summaries`
ON `conditions_treatment_summaries`.`id` = `conditions_treatment_summaries_join`.`condition_id`
WHERE
`conditions`.`id` = 9
AND `conditions`.`id` IN (9)
AND (latest_review_id is not null)
GROUP BY
treatment_reviews.id
ORDER BY
treatment_summaries.reviews_count desc
LIMIT 20 OFFSET 0
Maybe there is another issue, cause GROUP BY should not leave same lines (for given column), but anyway you can wrap it like this:
SELECT * FROM ( YOUR_SQL_SELECT_WITH_EVERYTHING ) GROUP BY id
So the result you get will behave as another table and you can do all operations like GROUP BY again.
Everything in the following query results in one line for each invBlueprintTypes row with the correct information. But I'm trying to add something to it. See below the codeblock.
Select
blueprintType.typeID,
blueprintType.typeName Blueprint,
productType.typeID,
productType.typeName Item,
productType.portionSize,
blueprintType.basePrice * 0.9 As bpoPrice,
productGroup.groupName ItemGroup,
productCategory.categoryName ItemCategory,
blueprints.productionTime,
blueprints.techLevel,
blueprints.researchProductivityTime,
blueprints.researchMaterialTime,
blueprints.researchCopyTime,
blueprints.researchTechTime,
blueprints.productivityModifier,
blueprints.materialModifier,
blueprints.wasteFactor,
blueprints.maxProductionLimit,
blueprints.blueprintTypeID
From
invBlueprintTypes As blueprints
Inner Join invTypes As blueprintType On blueprints.blueprintTypeID = blueprintType.typeID
Inner Join invTypes As productType On blueprints.productTypeID = productType.typeID
Inner Join invGroups As productGroup On productType.groupID = productGroup.groupID
Inner Join invCategories As productCategory On productGroup.categoryID = productCategory.categoryID
Where
blueprints.techLevel = 1 And
blueprintType.published = 1 And
productType.marketGroupID Is Not Null And
blueprintType.basePrice > 0
So what I need to get in here is the following table with the columns below it so I can use the values timestamp and sort the entire result by profitHour
tablename: invBlueprintTypesPrices
columns: blueprintTypeID, timestamp, profitHour
I need this information with the following select in mind. Using a select to show my intention of the JOIN/in-query select or whatever that can do this.
SELECT * FROM invBlueprintTypesPrices
WHERE blueprintTypeID = blueprintType.typeID
ORDER BY timestamp DESC LIMIT 1
And I need the main row from table invBlueprintTypes to still show even if there is no result from the invBlueprintTypesPrices. The LIMIT 1 is because I want the newest row possible, but deleting the older data is not a option since history is needed.
If I've understood correctly I think I need a subquery select, but how to do that? I've tired adding the exact query that is above with a AS blueprintPrices after the query's closing ), but did not work with a error with the
WHERE blueprintTypeID = blueprintType.typeID
part being the focus of the error. I have no idea why. Anyone who can solve this?
You'll need to use a LEFT JOIN to check for NULL values in invBlueprintTypesPrices. To mimic the LIMIT 1 per TypeId, you can use the MAX() or to truly make sure you only return a single record, use a row number -- this depends on whether you can have multiple max time stamps for each type id. Assuming not, then this should be close:
Select
...
From
invBlueprintTypes As blueprints
Inner Join invTypes As blueprintType On blueprints.blueprintTypeID = blueprintType.typeID
Inner Join invTypes As productType On blueprints.productTypeID = productType.typeID
Inner Join invGroups As productGroup On productType.groupID = productGroup.groupID
Inner Join invCategories As productCategory On productGroup.categoryID = productCategory.categoryID
Left Join (
SELECT MAX(TimeStamp) MaxTime, TypeId
FROM invBlueprintTypesPrices
GROUP BY TypeId
) blueprintTypePrice On blueprints.blueprintTypeID = blueprintTypePrice.typeID
Left Join invBlueprintTypesPrices blueprintTypePrices On
blueprintTypePrice.TypeId = blueprintTypePrices.TypeId AND
blueprintTypePrice.MaxTime = blueprintTypePrices.TimeStamp
Where
blueprints.techLevel = 1 And
blueprintType.published = 1 And
productType.marketGroupID Is Not Null And
blueprintType.basePrice > 0
Order By
blueprintTypePrices.profitHour
Assuming you might have the same max time stamp with 2 different records, replace the 2 left joins above with something similar to this getting the row number:
Left Join (
SELECT #rn:=IF(#prevTypeId=TypeId,#rn+1,1) rn,
TimeStamp,
TypeId,
profitHour,
#prevTypeId:=TypeId
FROM (SELECT *
FROM invBlueprintTypesPrices
ORDER BY TypeId, TimeStamp DESC) t
JOIN (SELECT #rn:=0) t2
) blueprintTypePrices On blueprints.blueprintTypeID = blueprintTypePrices.typeID AND blueprintTypePrices.rn=1
You don't say where you are putting the subquery. If in the select clause, then you have a problem because you are returning more than one value.
You can't put this into the from clause directly, because you have a correlated subquery (not allowed).
Instead, you can put it in like this:
from . . .
(select *
from invBLueprintTypesPrices ibptp
where ibtp.timestamp = (select ibptp2.timestamp
from invBLueprintTypesPrices ibptp2
where ibptp.blueprintTypeId = ibptp2.blueprintTypeId
order by timestamp desc
limit 1
)
) ibptp
on ibptp.blueprintTypeId = blueprintType.TypeID
This identifies the most recent records for all the blueprintTypeids in the subquery. It then joins in the one that matches.