I need to fill several of tables with CSV files. I tried to use a loop that do insert with each row but a file with 65,000 records take me more then 20 min.
I want to use the MySQL command LOAD DATA LOCAL INFILE, but I received this message :
LOAD DATA LOCAL INFILE forbidden in C:\xampp\htdocs\myProject\apps\backend\modules\member\actions\actions.class.php on line 112
After a little research, I understand there is need to change one of the security parameters of the PDO (PDO::MYSQL_ATTR_LOCAL_INFILE) to true.
In symfony2, you need to change it at config.yml of your app, but I can't find it on symfony 1.4.
Let me try to understand the question (or questions?!).
If you need to optimize the INSERT queries you should probably batch them at a single INSERT query or a few ones, but definitely not for each row. Besides, the INSERT query in MySQL will be always slow especially for a large amount of data inserted, also depends on indexing, engine and schema structure of the DB.
About the second question, take a look here, maybe it will help.
Related
I have 2.8 billion records in a table. The table uses INFOBRIGHT engine run on mysql installation. I have a few incorrect entries in the table and would like to get them corrected.
Table Test has 350 odd columns. I had like to swap data from column P1 to column P3 for a few records (not all). The approach that I had planned to carry to migrate data is as follows
Extract data from table Test to a CSV file using the INTO OUTFILE
functionality of mysql
Delete the unwanted records from the table.
Import the CSV data using the LOAD DATA INFILE and use the SET
clause to move the data from P1 to P3 (empty string for P1 and SET P1=P3)
The approach seemed to make sense, until I realized that INFOBRIGHT does not support the SET clause as mentioned here
Excerpts from the link below
The SET construct is supported by the MySQL loader found in the
standard MySQL download but not by the Infobright loader included in
ICE. I was able to actually execute a load using the SET statement;
what’s interesting is that it will run but the SET gets ignored by
Infobright.
Question
Is there a easier way to do this?
Of course, I can edit the CSV file. But for 2.8 billion records, I
would like to have a sure shot way of doing it. Any tested scripts
appreciated.
I would not want to use the mysql loader and load data in to MYISAM table, because
of the sheer size of data involved. Any faster approaches there?
Infobright don't allow SET while importing from file but you can choose mysql loader for loading the file. By default infobright use it's own loader but you can choose mysql loader to load file and then you can use SET.
You can set mysql loader using: set #bh_dataformat = 'mysql';
I don't know how much mysql loader will be slower than IB loader. I have loaded ~60GB file having ~60 columns in 1.5 hours.
I have a MySQL database that I use only for logging. It consists of several simple look-alike MyISAM tables. There is always one local (i.e. located on the same machine) client that only writes data to db and several remote clients that only read data.
What I need is to insert bulks of data from local client as fast as possible.
I have already tried many approaches to make this faster such as reducing amount of inserts by increasing the length of values list, or using LOAD DATA .. INFILE and some others.
Now it seems to me that I've came to the limitation of parsing values from string to its target data type (doesn't matter if it is done when parsing queries or a text file).
So the question is:
does MySQL provide some means of manipulating data directly for local clients (i.e. not using SQL)? Maybe there is some API that allow inserting data by simply passing a pointer.
Once again. I don't want to optimize SQL code or invoke the same queries in a script as hd1 adviced. What I want is to pass a buffer of data directly to the database engine. This means I don't want to invoke SQL at all. Is it possible?
Use mysql's LOAD DATA command:
Write the data to file in CSV format then execute this OS command:
LOAD DATA INFILE 'somefile.csv' INTO TABLE mytable
For more info, see the documentation
Other than LOAD DATA INFILE, I'm not sure there is any other way to get data into MySQL without using SQL. If you want to avoid parsing multiple times, you should use a client library that supports parameter binding, the query can be parsed and prepared once and executed multiple times with different data.
However, I highly doubt that parsing the query is your bottleneck. Is this a dedicated database server? What kind of hard disks are being used? Are they fast? Does your RAID controller have battery backed RAM? If so, you can optimize disk writes. Why aren't you using InnoDB instead of MyISAM?
With MySQL you can insert multiple tuples with one insert statement. I don't have an example, because I did this several years ago and don't have the source anymore.
Consider as mentioned to use one INSERT with multiple values:
INSERT INTO table_name (col1, col2) VALUES (1, 'A'), (2, 'B'), (3, 'C'), ( ... )
This leads to you only having to connect to your database with one bigger query instead of several smaller. It's easier to take in the entire couch through the door once than running back and forth with all disassembled pieces of the couch, opening the door every time. :)
Apart from that, you can also run LOCK TABLES table_name WRITE before INSERT and UNLOCK TABLES afterwards. That will secure that nothing else is inserted during.
Lock tables
INSERT into foo (foocol1, foocol2) VALUES ('foocol1val1', 'foocol2val1'),('foocol1val2','foocol2val2') and so on should sort you. More information and sample code will be found here. If you have further problems, do leave a comment.
UPDATE
If you don't want to use SQL, then try this shell script to do as many inserts as you want, put it in a file, say insertToDb.sh, and get on with your day/evening:
#!/bin/sh
mysql --user=me --password=foo dbname -h foo.example.com -e "insert into tablename (col1, col2) values ($1, $2);"
Invoke as sh insertToDb.sh col1value col2value. If I've still misunderstood your question, leave another comment.
After making some investigation I found no way of passing data directly to mysql database engine (without parsing it).
My aim was to speed up communication between local client and db server as much as possible. The idea was if client is local then it could use some api functions to pass data to db engine thus not using (i.e. parsing) SQL and values in it. The only closest solution was proposed by bobwienholt (using prepared statement and binding parameters). But LOAD DATA .. INFILE appeared to be a bit faster in my case.
The best way to insert data on MS SQL without using insert into or update queries is just to access MS SQL Interface. Right click on the table name and select "Edit top 200 rows". Then you will be able to add data on the database directly by just typing per cell. For you to enable searching or using select or other sql commands just right click on any of the 200 rows you have selected. Go to pane then select SQL and you can add sql command. Check it out. :D
without using insert statement , use " Sqllite Studio " for inserting data in mysql. It's free and open source so u can download and check.
The problem is:
I've got a SQLite database which is constantly being updated though a proprietary application.
I'm building an application which uses MySQL and the database design is very different from the one of SQLite.
I then have to copy data from SQLite to MySQL but it should be done very carefully as not everything should be moved, tables and fields have different names and sometimes data from one table goes to two tables (or the opposite).
In short, SQLite should behave as a client to MySQL inserting what is new and updating the old in an automated way. It doesn't need to be updating in real time; every X hours would be enough.
A google search gave me this:
http://migratedb.sourceforge.net/
And asking a friend I got information about the Multisource plugin (Squirrel SQL) in this page:
http://squirrel-sql.sourceforge.net/index.php?page=plugins
I would like to know if there is a better way to solve the problem or if I will have to make a custom script myself.
Thank you!
I recommend a custom script for this:
If it's not a one-to-one conversion between the tables and fields, tools might not help there. In your question, you've said:
...and sometimes data from one table goes to two tables (or the opposite).
If you only want the differences, then you'll need to build the logic for that unless every record in the SQLite db has timestamps.
Are you going to be updating the MySQL db at all? If not, are you okay to completely delete the MySQL db and refresh it every X hours with all the data from SQLite?
Also, if you are comfortable with a scripting language (like php, python, perl, ruby, etc.), they have API's for both SQLite and MySQL; it would be easy enough to build your own script which you can control customise more easily based on program logic. Especially if you want to run "conversions" between the data from one to the other and not just simple mapping.
I hope i understand you correctly, that you will flush the data which are stored in a SQLite DB periodicly to a MySQL DB. Right?
So this is how i would do it.
Create a Cron, which starts the script every x minutes.
Export the Data from SQLite into an CSV-File.
Do an LOAD DATA INFILE an import the CSV Data to MySQL
Code example for LOAD DATA INFILE
LOAD DATA INFILE 'PATH_TO_EXPORTED_CSV' REPLACE INTO TABLE your_table FIELDS TERMINATED BY ';' ENCLOSED BY '\"' LINES TERMINATED BY '\\n' IGNORE 1 LINES ( #value_column1, #unimportend_value, #value_column2, #unimportend_value, #unimportend_value, #value_column3) SET diff_mysql_column1 = #value_column1, diff_mysql_column2 = #value_column2, diff_mysql_column3 = #value_column3);
This Code you can query to as much db tables you want. Also you can change the variables #value_column1.
Im in a hurry. so thats it for now. ask if something is unclear.
Greets Michael
I have to upload a crores of data into mysql table. The data is in the form of .csv format. I was tried with load infile method. but, it is also taking very long time. Is there any other way to upload a data ?
You can try the Load Data statement of MYSQL -
http://dev.mysql.com/doc/refman/5.0/en/load-data.html
The LOAD DATA INFILE statement reads rows from a text file into a table at a very high speed. The file name must be given as a literal string.
There is a MySQL utility called mysqlimport http://dev.mysql.com/doc/refman/5.0/en/mysqlimport.html
I suggest to try that.
EDIT Actually it seems to be the same as LOAD DATA INFILE
You can find some usefull tuning tips here:
Speed of INSERT Statements
Bulk Data Loading for MyISAM Tables
Bulk Data Loading for InnoDB Tables
Hope this helps
I hava text file full of values like this:
The first line is a list of column names like this:
col_name_1, col_name_2, col_name_3 ......(600 columns)
and all the following columns have values like this:
1101,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,1101,1,3.86,65,0.46418,65,0.57151...
What is the best way to import this into mysql?
Specifically how to come up with the proper CREATE TABLE command so that the data will load itself properly? What is the best generic data type which would take in all the above values like 1101 or 3.86 or 0.57151. I am not worried about the table being inefficient in terms of storage as I need this for a one time usage.
I have tried some of the suggestions in other related questions like using Phpmyadmin (it crashes I am guessing due to the large amount of data)
Please help!
Data in CSV files is not normalized; those 600 columns may be spread across a couple of related tables. This is the recommended way of treating those data. You can then use fgetcsv() to read CSV files line-by-line in PHP.
To make MySQL process the CSV, you can create a 600 column table (I think) and issue a LOAD DATA LOCAL INFILE statement (or perhaps use mysqlimport, not sure about that).
The most generic data type would have to be VARCHAR or TEXT for bigger values, but of course you would lose semantics when used on numbers, dates, etc.
I noticed that you included the phpmyadmin tag.
PHPMyAdmin can handle this out of box. It will decide "magically" which types to make each column, and will CREATE the table for you, as well as INSERT all the data. There is no need to worry about LOAD DATA FROM INFILE, though that method can be more safe if you want to know exactly what's going on without relying on PHPMyAdmin's magic tooling.
Try convertcsvtomysql, just upload your csv file and then you can download and/or copy the mysql statement to create the table and insert rows.