I need help regarding SSRS Reporting my data is Coming from a Query and I also have added the Column Group Named as Subject Name Showing on the top of the Table() Also Added ApplicantID as Row Group and FName as a Row Group in the Report to fulfill my requirement that was just to show
Since I am not Sure how many subjects a user can select its all decide on the run time so i did added the Subject name as a column group
All the Subject records in a single row for a specific ApplicantId Instead of showing below my Requirement is
It Should looks like as a table
Anatomy Surgery Zoology
Part ISt
14 Hanan Qureshi Iqbal Qureshi 15.00 20.00 10.00
15 Tasneem Alam Imtiaz Alam 30.00 10.00 20.00
etc instead of Showing in a seperate row it should show in a single row
Details group is your problem as #hemanth said you need to remove this and add in an aggregate function (max, min, sum, average) any will work since there is only one value for each SubjectName, Obtained Mark Combo. this will give you all the marks on one line for each applicant.
Related
I am working on a report to show the total number of hours an employee spent working. Our company tracks labor hours by Service Request and Work Order so I need to bring totals for each into the report.
I created two datasets- one for Work Orders and one for Service Requests. Ideally, I would like to combine the total number of Work Order hours with the total number of Service Request hours and present that number listed by employeeID since both datasets have the employeeID field.
I thought it would be as simple as:
=(SUM(Fields!TOTALHOURS_WO.Value, "DataSet1") + SUM(Fields!TOTALHOURS_SR.Value, "DataSet2"))
I don't get an error, however, I am getting a number which repeats for each employee so I know I'm doing something wrong.
Any help is greatly appreciated.
Mal,
As #StevenWhite mentioned, LOOKUP is probably the function you are looking for.
Here is an example for you. For the example datasets:
EmployeeID | TOTALHOURS_WO
-----------------------------------
123 | 12
456 | 3
EmployeeNum| TOTALHOURS_SR
-----------------------------------
123 | 2
456 | 5
You will note that each table in a SSRS report needs a DataSet assigned to it. I will assume your table is using our first DataSet, which we will name "DataSet1". The second dataset above will be "DataSet2".
For your total hours you will use an expression. It should look something like this:
=TOTALHOURS_WO + LOOKUP(Fields!EmployeeID.Value, Fields!EmployeeNum.Value, Fields!TOTALHOURS_SR.Value, "DataSet2")
So you will be adding the TOTALHOURS_WO from your local dataset to the result from the LOOKUP function. What lookup is doing is taking the first field from your local dataset, finding a match in the dataset provided to the function (as a string), and returning the field from the row it matched to. The last parameter is the dataset to search.
Just in case you get an error... it's always a good idea to cast data to the type you want to work with in case it comes in wrong. So...
=CINT(TOTALHOURS_WO) + CINT(LOOKUP(Fields!EmployeeID.Value, Fields!EmployeeNum.Value, Fields!TOTALHOURS_SR.Value, "DataSet2"))
This assumes you have a one to one match on employee ID. If you have to SUM both fields you can try this:
=SUM(CINT(TOTALHOURS_WO)) + SUM(LOOKUPSET(Fields!EmployeeID.Value, Fields!EmployeeNum.Value, CINT(Fields!TOTALHOURS_SR.Value), "DataSet2"))
SUM for TOTALHOURS_WO will give you the SUM in your current table group (so make sure you are grouping by staff ID in the table). It will then add it to the SUM of LOOKUPSET. LOOKUPSET works the same as lookup but returns an array of matches instead of the first.
Hope this helps.
I need to create a report which is something similar to a Pivot Table.
The report would be something like below, with more towns
I C S Total
Town1 1 2 3 6
Town2 7 1 1 9
Town3 2 3 1 6
Total 10 6 5 21
In Crystal reports, there is an integrated function called Cross table
(see pictures below)
I'm looking for a similar function in SSRS, if there is any. I parsed the internet but I could not find anything that is relevant
Thanks!
You need a matrix to do so
Select the row, once the matrix created, like the image below and click on the row group and look at the group properties
You then choose the row for which you want to do the grouping like the image below
Repeat the operations for the column group.
You will need to add additional row and columns for the total.
I will do that for the row. You click the row to highlight it and then click on insert rows. You then choose Outside group below like in the picture below
Repeat the operations for the column group.
To have total, please put the following formula in your row and column created outside of the group SUM(COUNT(Fields!name_of_your_field.Value)) and you have the double entry table.
Let me know through the comments if you have any issues, I'll happy to help.
I have a table in a SSRS report that is displaying only a group, not the table details. I want to find out the row number for the items that are being displayed so that I can use color banding. I tried using "Rowcount(Nothing)", but instead I get the row number of the detail table.
My underlying data is something like
ROwId Team Fan
1 Yankees John
2 Yankees Russ
3 Red Socks Mark
4 Red Socks Mary
...
8 Orioles Elliot
...
29 Dodgers Jim
...
43 Giants Harry
My table showing only the groups looks like this:
ROwId Team
2 Yankees
3 Red Socks
8 Orioles
29 Dodgers
43 Giants
I want it to look like
ROwId Team
1 Yankees
2 Red Socks
3 Orioles
4 Dodgers
5 Giants
You can do this with a RunningValue expression, something like:
=RunningValue(Fields!Team.Value, CountDistinct, "DataSet1")
DataSet1 being the name of the underlying dataset.
Consider the data:
Creating a simple report and comparing the RowNumber and RunningValue approaches shows that RunningValue gives your required results:
You can easily achieve this with a little bit of vbcode. Go to Report - Properties - code and type something like:
Dim rownumber = 0
Function writeRow()
rownumber = rownumber + 1
return rownumber
End Function
Then on your cell, call this function by using =Code.writeRow()
As soon as you start using groups inside the tables, the RowNumber and RunningGroup functions start getting some weird behaviours, thus it's easier to just write a bit of code to do what you want.
I am not convinced all suggestions above provide are a one for all solution. My scenario is I have a grouping that has has multiple columns. I could not use the agreed solution RunningValue because I don't have a single column to use in the function unless I combine (say a computed column) them all to make single unique column.
I could not use the VBA code function as is for the same reason and I had to use the same value across multiple columns and multiple properties for that matter unless I use some other kind of smarts where if I knew the number of uses (say N columns * M properties) then I could only update the RowNumber on every NxM calls however, I could not see any count columns function so if I added a column I would also need to increase my N constant. I also did not want to add a new column as also suggested to my grouping as I could not figure out how to hide it and I could not write a vba system where I could call function A that returns nothing but updates the value (i.e. called only once per group row) then call another function GetRowNumber which simply returns the rownumber variable because the colouring was done before the call so I always had one column out of sync to the rest.
My only other 2 solutions I could think of is put the combined column as mentioned earlier in the query itself or use DENSE_RANK and sort on all group columns, i.e.
DENSE_RANK() OVER (ORDER BY GroupCol1, GroupCol2, ...) AS RowNumber
I need to create report with table which looks like this
Country 1 Country 2 Country 3 Total
Category 1 1(2) 2(1) 5(6) 8(9)
Category 2 2(3) 2(1) 4(0) 8(4)
Category 3 3(2) 2(1) 3(1) 8(4)
Total 6(7) 6(3) 12(7) 24(17)
Report contains data about TFS WI's and has information about current week's WI count and last weeks WI count (in brackets)
Data set on which this report is based on MDX query against TFS warehousw cube and has such structure:
Category Country Week Count
1 1 this 1
1 2 this 2
1 3 this 5
1 1 last 2
1 2 last 1
1 3 last 6
Trouble is, I cann't find a way how to concatenate data about current and last weeks incident count in one cell. I have toyed around with idea to do it in MDX, but with my limited MDX skills I can't see how it could be done.
Rowgroup on Category.
Columngroup on Country.
Inside the cell you should be able to have 2 placeholders with the second one in brackets. The first expression should be:
=Sum(iif(Fields!Week.Value = "this", Fields!Count.Value, 0))
The second one should be:
=Sum(iif(Fields!Week.Value = "last", Fields!Count.Value, 0))
In MDX you could create two calcs - this and last week (of course you'll need to change this to work with your cube):
WITH
MEMBER [Measures].[thisWeekCount] AS
([Date].[Week].[this], [Measures].[Count])
MEMBER [Measures].[lastWeekCount] AS
([Date].[Week].[last], [Measures].[Count])
SELECT
{
[Measures].[thisWeekCount],
[Measures].[lastWeekCount]
} ON 0,
{
...
} ON 1
FROM [Your Cube]
Then, you can use them within placeholders as jimconstable explained, but without the iif functions.
Thank you all for your answers!
I found out that main problem (reporting services allows only one measure on columns) can be solved by using Analysis server OLE DB provider. There are some drawbacks, like that parameters are not supported, but I can live with this.
In SSRS 2005 I am reporting on all available posts by regional office, listed by region,office,vacancyID.
I then display a total per office on how many people started in a particular vacancyID by doing a Count(VacancyStartID).
In the same group row with the Count(VacancyStartID) I need to display SUM(VacancyID).
However at present this does not give the correct SUM, because some vacancies have multiple VacancyStartID's and hence the vacancyID is listed few times, like so:
office vacancyID Number_of_vacancies VacancyStartID (person who started a job)
1 1 2 4567
1 1 2 5678
Totals: 4 (needs to be 2) 2
P.S. Note:These questions are not applicable in this instance:
How can I remove duplicate rows?
How do I remove "duplicate" rows from a view?
Using multiple COUNTs and SUMs in a single SQL statement
If it's in the Underlying SQL Server call...
You can do ...SUM(DISTINCT VacancyID)... like you can COUNT (DISTINCT ..)
Edit:
SELECT
col1, col2, SUM(DISTINCT Number_of_vacancies) as foo, COUNT (VacancyStartID) as bar
FROM
MyView
...
If it's in the table or for a cell in the report, then there is no equivalent in the SSRS SUM function.
Do some grouping already in your query and then make a group with a simple Count in SSRS.