Does anyone know how to solve this Error on RAD Studio XE6 Delphi
If you take the sample app supplied by Embarcadero
FireDAC\Samples\Comp Layer\TFDConnection\DLL_Sharing and change the FDConnection to use a MySQL server instead, you get this error.
[FireDac][Phys][MySQL]-1101. Unsupported MySQL version [0]. Supported are client and server from v 3.20 to v6.2.
The connection in the exe works, using the MySQL server, but the sharing in the DLL does not.
Even though the steps in the FireDAC DLL_Sharing are followed..
Copy the file FireDAC.Phys.MySQLWrapper.pas (from source\data\firedac directory) to your project directory, edit the file, and look for the following three lines:
if (FVersion < mvMySQL032000) or (FVersion >= mvMySQL060200) then
FDException(OwningObj, [S_FD_LPhys, S_FD_MySQLId], er_FD_MySQLBadVersion,
[FVersion]);
Remove them (or place them in comments), and rebuild your project. Make sure that it uses the FireDAC.Phys.MySQLWrapper from your project directory (you may have to close and re-open the project to ensure it uses your local unit).
That way, you still won't be able to connect at design-time, but at least it will work at runtime.
Groetjes, Bob Swart
Use the "original" mysql libmysql.dll and its work fine ;)
the mariadb's libmysql.dll causes this error
Related
I've been following the 5 min how to for setting up an htap databse with tidb_tispark and everything works until I get to the section Launch TiSpark. My first issue occurs when executing the line:
docker-compose exec tispark-master /opt/spark-2.1.1-bin-hadoop2.7/bin/spark-shell
But I got around that by modifying the spark version to the version I found inside the container:
docker-compose exec tispark-master /opt/spark-2.3.3-bin-hadoop2.7/bin/spark-shell
My second issue occurs when executing the three line block:
import org.apache.spark.sql.TiContext
val ti = new TiContext(spark)
ti.tidbMapDatabase("TPCH_001")
When I run the last statement I get the following output
scala> ti.tidbMapDatabase("TPCH_001")
2019-07-11 16:14:32 WARN General:96 - Plugin (Bundle) "org.datanucleus" is already registered. Ensure you dont have multiple JAR versions of the same plugin in the classpath. The URL "file:/opt/spark/jars/datanucleus-core-3.2.10.jar" is already registered, and you are trying to register an identical plugin located at URL "file:/opt/spark-2.3.3-bin-hadoop2.7/jars/datanucleus-core-3.2.10.jar."
2019-07-11 16:14:32 WARN General:96 - Plugin (Bundle) "org.datanucleus.api.jdo" is already registered. Ensure you dont have multiple JAR versions of the same plugin in the classpath. The URL "file:/opt/spark/jars/datanucleus-api-jdo-3.2.6.jar" is already registered, and you are trying to register an identical plugin located at URL "file:/opt/spark-2.3.3-bin-hadoop2.7/jars/datanucleus-api-jdo-3.2.6.jar."
2019-07-11 16:14:32 WARN General:96 - Plugin (Bundle) "org.datanucleus.store.rdbms" is already registered. Ensure you dont have multiple JAR versions of the same plugin in the classpath. The URL "file:/opt/spark/jars/datanucleus-rdbms-3.2.9.jar" is already registered, and you are trying to register an identical plugin located at URL "file:/opt/spark-2.3.3-bin-hadoop2.7/jars/datanucleus-rdbms-3.2.9.jar."
2019-07-11 16:14:36 WARN ObjectStore:568 - Failed to get database global_temp, returning NoSuchObjectException
This doesn't prevent me from running the query:
spark.sql("select * from nation").show(30);
But when I follow the further steps of the tutorial to modify the db from MySQL, the changes are not reflected immediately in Spark. Furthermore, at some point in the future (I believe > 5 minutes later), the row that was modified stops showing up in Spark SQL queries.
I'm rather new to this kind of setup and don't really know how to debug this issue. Searches for the warnings I received weren't illuminating.
I don't know if it's helpful but when I connect MySQL this is the server version I get:
Server version: 5.7.25-TiDB-v3.0.0-rc.1-309-g8c20289c7 MySQL Community Server (Apache License 2.0)
I'm one of the main dev of TiSpark. Sorry for your bad experience with it.
Due to my docker problem, I cannot directly reproduce your issue but it seems you hit one of the bug fixed recently.
https://github.com/pingcap/tispark/pull/862/files
The tutorial document is not quite up-to-date and points to an older version. That's why it didn't work with spark 2.1.1 as in tutorial. We will update it ASAP.
Newer version of TiSpark doesn't use tidbMapDatabase anymore but hooks with catalog directly instead. Method tidbMapDatabase remains for backward compatibility. Unfortunately, the tidbMapDatabase had a bug（when we ported it from older version） that it retrieves timestamp for query only once you call the function. That causes TiSpark always uses old timestamp to do snapshot reading and newer data would never be seen by it.
In newer version of TiSpark (TiSpark 2.0+ with Spark 2.3+), databases and tables are directly hooked into catalog services and you can directly call
spark.sql("use TPCH_001").show
spark.sql("select * from nation").show
This should give you fresh data.
So try restart your Spark driver, just try the two lines of code above and see if it works.
Let me know if this fix your problem. On the other hand, we will check our docker image to make sure if it contains the fix already.
If things still get wrong, would you please help to run below code and let us know the version of TiSpark.
spark.sql("select ti_version()").show
Again, sorry for causing you trouble and thanks for trying.
EDIT
To address your comment:
The warning is due to spark itself will try to locate the database in its native catalog first and this will cause a Failed to get warning. But the failover process will delegate the search to tispark and then behave correctly. So this warning can be ignored. It's recommended that add below lines to your log4j.properties in conf folder of your spark.
log4j.logger.org.apache.hadoop.hive.metastore.ObjectStore=ERROR
We will polish the docker tutorial image soon. Thank you so much for trying.
I've been forced to try to port to PySide2 from PySide because I'm developing code (on Windows 7) used inside Maya and Maya 2017 has moved to PySide2.
PySide2 ships with Maya but only comes with the driver to talk to sqlite DBs. So I need to tell Qt about a new DIR that contains the MySql driver, like this:
from PySide2 import QtWidgets
QtWidgets.QApplication.addLibraryPath("C:\temp\plugins")
This DIR contains a sub sqldrivers DIR which contains the driver. This works- when I call QtSql.QSqlDatabase.drivers() the new one is there so I've got the right driver and it's being picked up.
However when I create a new DB and call open:
db = QtSql.QSqlDatabase.addDatabase("QMYSQL3")
db.setDatabaseName("my_db")
db.setHostName("host")
db.setUserName("user")
db.setPassword("password")
db.open()
the open command returns False and the DB is not accessible. I call:
db.lastError()
and get:
# Result: <PySide2.QtSql.QSqlError("", "Driver not loaded", "Driver not loaded") at 0x0000000075410C08> #
NB: we successfully did the exact same thing with the previous PySide version.
Other threads mention similar things and it turned out to be missing the actual libmysql.dll, which is the actual MySql DLL and can result in the same error if missing. However I definitely have this on my system and it's definitely in the PATH. It's actually the same file that is being successfully picked up through PySide. But the PySide2 driver just wont open a connection to the DB.
I suspect maybe a dodgy driver but wondered if anyone has any experience with this or any advice?
I had the same error, but with postgres.
I solved by placing the libpq.dll connector library next to my script.py.
Then for mysql it would be libmysql.dll.
In my case I had to build the libpq.dll from the source of postgres 9.6
It seems that with PySide2 it is not necessary to use:
QtWidgets.QApplication.addLibraryPath ("C: \ path_to\ plugins")
using:
print (PySide2.QtCore.QLibraryInfo.location (PySide2.QtCore.QLibraryInfo.PluginsPath)), I could see that the path was correct.
a greeting
I'm seeing dozens of entries, daily, in my cgi_error_log file like this:
20151214T183710: www.example/index.php
Failed loading /usr/local/lib/ioncube/ioncube_loader_lin_5.2.so: /usr/local/lib/ioncube/ioncube_loader_lin_5.2.so: wrong ELF class: ELFCLASS32
Failed loading /usr/local/Zend/lib/ZendExtensionManager.so: /usr/local/Zend/lib/ZendExtensionManager.so: wrong ELF class: ELFCLASS32
I changed the URL in the error message because the site is not yet ready for the public and I don't want any links to the site or even text in posts like this laying around.
As the site is still in testing, these messages are coming from my accessing pages and all of the pages have loaded correctly.
What does this message mean? I have no clue other than that ioncube is some sort of PHP Encoder.
Could this have something to do with the 32bit version of ioncube being run on a 64bit system? I've found references to that sort of problem.
Did some more digging - could this be happening because the version of PHP on the server is not 5.2? Error about ioncube shows 4.2 in the file name.
The version I'm using on the server if 5.5. They have 5.3 and 5.6.
If they had 5.2 I'd give it a try but it is not available.
More digging - found this set in my php.ini file for all my sites.
[Zend]
zend_extension = /usr/local/lib/ioncube/ioncube_loader_lin_5.2.so
zend_extension_manager.optimizer=/usr/local/Zend/lib/Optimizer-3.2.0
zend_extension_manager.optimizer_ts=/usr/local/Zend/lib/Optimizer_TS-3.2.0
zend_optimizer.version=3.2.0
zend_extension=/usr/local/Zend/lib/ZendExtensionManager.so
zend_extension_ts=/usr/local/Zend/lib/ZendExtensionManager_TS.so
So - do I need to install newer versions of one or more of the items listed above?
If so - where do I start and can I do it myself or does the hosting company staff have to do it?
I built my App using Mysql Connector/C to connect a remote Mysql database, its works fine on the simulator (no errors, no warnings) but when i try to run it on my device (iphone5) i got this error:
No architectures to compile for (ARCHS=armv7 armv7s, VALID_ARCHS=armv7 armv7s)
i tried -as in some answers- to change setting (Architectures - Build Active Architectures- Valid Architectures) but the error still, only when i change the setting (Architectures & Valid Architectures) to "armv6" its build without error but many warnings appears says:
warning: no rule to process file '(my App dir)/main.m' of type sourcecode.c.objc for architecture armv6
and also for all .m files, when i tried to start the App i got message:
Xcode cannot run using selected device
I know that the Connector library need to update , but are there any solution ?
your need compile the connector lib in xcode for iOS (armv6, armv7, armv7s, i386), then use lipo tool to combine output libs.
direct connect your mysql in app is not safe, a suggest way is setup a Apache+PHP+MySQL server, then on iPhone useing ASIHTTPRequest to connect your server.
I have a web server with MONO 2.10.2 (fast-cgi) on a CentOS 6 box. Running a plain-vanilla MVC 3 site works great. However, when I add MySql.Data, it gives me a not-so-helpful error:
System.IO.FileLoadException: The assembly name is invalid.
My DLLs are in the right place. They're referenced properly. Everything has been done correctly, but Mono still complains that it can't find an assembly without telling me which one. The problem occurs after simply adding a reference to MySql.Data and without changing any code. I've looked through the MySql.Data source solution and the references that it needs seem to exist on the web server.
I understand other people have the same problem. I am happy to debug it myself, but I'm new to Mono and I can't figure out how to get a more-detailed error messages. I've checked Mono's site for instructions to enable more detailed logging, but their docs assume a certain base knowledge about Mono that I do not have.
Is there a way to get more detailed information when Mono fails to load an assembly?
I'm not sure if these details matter, but just in case...
- Mono: 2.10.2 (served via fastcgi-mono-server4)
- MySql: Connector.Net 6.4.4.0 (from the v4 set in the .Net & Mono download)
- Webserver: NGINX 1.0.11
- OS: CentOS 6
If you can get a "test case" that compiles to an application, try:
MONO_LOG_LEVEL="debug" MONO_LOG_MASK="dll" mono my_app.exe
Or just temporarily edit your CGI script so that it sets those two variables. Check the logs - you should see what is not loaded propely.