I come to you with a question on how I can create a simple flow chart like in the pictures below in SSRS. I have a query that returns rows with events, and a date column that I can use to organize these events in chronological order.
I have it all basically set up but I am running into a design problem. I have a tablix with two columns in a group for the box+arrow combination, with column visibility set up to hide the arrow if it reaches the last event. What I would like to happen is for the boxes to reach the end of the page (the rightmost side of the page, and then come down a short distance below that row of boxes and continue on the same page (Ex. B). What it's doing is reaching the end of the side of the page, and breaking to the next page, effectively creating a bunch of pages with only one row of boxes on each page. (Ex. A)
Ex. A: What it does:
Ex. B: What I want it to do (accidentally forgot to include the arrow on the middle rightmost box in the picture, the second and third rows are just continuations of the first obviously):
I would almost call it row wrapping but it's not exactly the same. To bring the problem away from my specific flow chart design, I want to make tablix columns wrap down directly below the table (not the content inside the columns, the actual columns themselves).
I've done some reading on column groupings and interactive page size. I don't really understand the column grouping manipulation, especially when trying to apply it to my situation, and the interactive page size doesn't seem to be what I am looking for either. Any help on this would be really appreciated!
I suggest you use a multi-column layout, e.g.
http://nederveld.wordpress.com/2010/02/15/how-to-do-a-column-layout-in-sql-reporting-services/
Each of your Box + Arrow pairs would go into each cell.
I'm a bit confused about your arrow requirement, you might need to use an expression based on RowNumber to hide the arrow in the last column.
Related
Why is it that a control that appears in the property list in a BIDS project is not represented in the corresponding .rdl file?
Let me step back a bit; I'm having a heck of a time trying to figure out how to add items to an existing report, either via the XML (.rdl viewed as code) or on the design surface. I can click on a rectangle on the design surface and see a column row above it:
And if I click on the "pipe"-separated segements on that column heading row, I see "MatrixColumn4", "MatrixColumn3", "MatrixColumn2", and "MatrixColumn1" in the designer; for example, here's MatrixColumn3:
However, only one of these columns appears at a time in the Property list - if I select MatrixColumn3 on the design surface, MatrixColumn1, MatrixColumn2, and MatrixColumn4 are not there. The same holds true for selecting any of the others - it turns up temporarily in the Properties list but "hides" all the others:
Stranger yet, when I search the .rdl file (viewed as XML) for "MatrixColumn1" (or "2" or "3" or "4") they do not exist there. In fact, the only reference to "MatrixColumn" in the entire file is this:
<Matrix Name="matrix1">
<MatrixColumns>
<MatrixColumn>
<Width>1.67609in</Width>
</MatrixColumn>
</MatrixColumns>
. . .
This seems exceedingly bizarre - shouldn't there be four sets of <MatrixColumn></MatrixColumn> there?
I want to add another column heading, with a Textbox-as-label and a Textbox below that to display dynamic content, but how can I do it without adding another column heading?, or at least making room for this new column?
I can increase the width of the matrix ("matrix1") by dragging it or by increasing its Size.Width value, but its existing contents expand with it, giving me no room to add TextBoxes inside of it.
Maybe I'm approaching SSRS from a completely wrong mental angle, as I don't see much of a connection between what the report generates and what I see on the design surface and in the XML.
To add another column to a matrix right click the column header and Select Insert column. Then choose either inside group (left or right), or outside group (left or right).
A column created inside the group will repeat for every item in the column group
A column created outside the group will only appear the once to the left or right of the grouped columns.
Are you sure you are referring to a matrix (dynamic columns and rows) and not a tablix (dynamic number of rows only)?
The process for tablixes is the same as for matrixes as described above, just without the inside/outside group option.
Either method described above will include a new column with a single text box to label the column with, and another text box underneath to put the detail in.
You can also do this process by dragging a field from your dataset in the Report Data panel to the appropriate location in your existing table.
Please let me know if this helps, or if I've misunderstood your question and you require a different solution.
I work with ssrs with a dynamic row data in matrix/tablix. There is possibility when I have more than one page (say it two pages) where the data just fill half of the second page and leave a blank space below (half page blank space on the second page). How is the way to fill this blank space with empty rows? (whether rendering empty rows in the tablix, or inserting background image, or anything. I don't have any solution yet as it is dynamic data with many possibilities of the blank space size on the page)
Unfortunately there aren't any settings in the reporter that support this behavior. There are however several workarounds you could use to get the wanted result.
[1]
You could determine the amount of rows that fit on the first page and on the second page, just in case you have items above the
table on the first page. Before you send the datasource to the
reporter count the total rows and check if it exceeds the first page.
Then calculate the number of rows missing to fill an entire second
page (or third/fourth... if you ever get more data). Finally you add
empty rows/objects at the end of your datasource, which will of cource
cause the pages to be filled to the end.
As was pointed out before, this solution is only possible when working
with fixed row heights. If certain columns can have multi-line cells
then these could be checked as well and taken in account when
calculating the number of rows being displayed on the page. This makes
it slightly more complicated but is still a valid solution if you can
predict which columns might be troublesome.
[2]
A second solution would be to hide the table borders and place the table inside a rectangle that spans the maximum size of the
page. The borders of this rectangle can be used to display the table
outer borders and columns can be displayed by adding lines inside the
rectangle. This will cause the columns to fill the last page of the
report automatically. Unfortunately this isn't a solution to display
horizontal grid lines.
[3]
A third approach is adding an extra table directly below your table
with the same size of columns. Using the same method as from the first
solution you could fill the second table to represent the empty rows.
You'll probably have the same issue as with the first solution when
dealing with multi-line rows though.
I believe solution [1] and [3] will offer the most exact solution, if you're willing to do the math. If you don't want any horizontal lines then I suggest using approach [2].
Using an image to overlay the borders is of course another option but then you'll have the same issues when dealing with the multi-line rows. If you plan on working with fixed row heights, where you leave space for multi-line cells then this is becomes a valid approach but so does solutions [1] and [3].
Update:
If you only need the filled pages for printing you could make sure you add enough empty rows to fill at least the entire last page, these may go to a new page (1 new page, not 2... you can use a simple calculated guess for this) and exclude the last page when printing.
The Problem in Hand:
I want to make a form designer where user can drag and drop fields of different type and design the layout too, some what similar to wufoo form builder but here the layout is limited to single column whereas I want to make something where user can make the layout as they want.
I understand how to do in single column view, but could not understand how to achieve multiple column layout eg: row 1 there could be 3 elements, row 2 one element stretched to full length, row 3 there could be just 2 elements etc.
What I tried:
I have tried with jquery UI sortable to make a single column layout with using div where new elements can be dragged and repositioned.
Any suggestion on how to proceed further will be helpful
I have tried searching StackOverFlow and google but could not find any link on a similar topic. If anyone could point me to the same, it will be also helpful.
When you reorder elements on wufoo form builder, you can only drag'n'drop up or down. Remove that restriction and as soon as one element is dragged across a certain threshold, it "belongs" to the next column. If the "old" column was the first or last one and the line that the element was moved over was to the "outside" of the form, add a new column there, until the maximal number of columns is reached.
If the used drags the last element of a column into another column, remove the now empty column on element-drop.
You could also remove the dynamic adding/removing of columns and juist have a button ("remove column" & "add column") to do it by code.
An example for the dropping in another column can be found here: http://jqueryui.com/sortable/#connect-lists
Hope this helped!
Edit:
http://jqueryui.com/sortable/#portlets and http://jqueryui.com/sortable/#empty-lists also have elements that you could look into. Good luck! Sounds like a nice project. Can we see any progress or beta?
I am attempting to reproduce a form within SSRS and fill it with data. The original form has blocks with small labels inside of each box that identifies the entry requested.
I "thought" I could simply use two different tablixes: one for the blocks with borders and labels, and the other one with the actual datafields or expressions, and align the 2nd tablix directly over the first one so that it appears as though the fields are presenting data inside of the labeled boxes.
It looked as I wanted it in design view, but when I went to preview the report, it pushed the 2nd tablix below the first tablix, in effect creating two tablixes, one stacked on top of the other one (not displaying as how I intended).
So, how do I accomplish the form design in the manner that I am seeking?
You should be using a type other than tablix for your report. Use a 'List' instead and you can free float objects as you need them and also nest a tablix as well. A little explanation on list:
You can float images with text boxes and then even change syntax or draw boxes around them and decorate those.
The call out for a field in SSRS is [(value)] with the [] meaning: "Data Column in recognized Dataset"
You can call out Variables with an '#' in front of them [#Test] would be a variable a user would put in called 'Test'.
Whatever size 'List' element is will determine how large it is when it repeats. If you want a strict form ensure the length and width are set correctly on the properties of that element.
If you want it to break every page you can click on the 'List' > Right Click the top left corner > Properties > 'Add a page break before' checkbox.
My example shows a super simple textbox with a dataset that only has three ideas repeat as many times as there are id's, three times. You can apply this to your form as needed.
It looks like you could reproduce that form header quite easily with a single tablix. If you envisage the form as a set of tablix cells like so:
then all you need to do is set the Border properties for each cell to hide the borders as needed (or you could merge the cells e.g those for Applicant and Location).
You can use a tablix with only Header rows, deleting the detail row. If you need multiple forms per report, then put the tablix inside a List region.
I have a tablix with two columns of data (the section name and the section text). The section text has grown so large for some sections that the row representing the section takes up 2/3 or more of the page. THe report prints fine until on of these large rows would have to split over the end of a page and continue on the next page. In this case, and only in this case, the rows leaves large amounts of white space on current page and start on the next page (as if it had a page break before it)
I have already set the Tablix General Property "keep together on one page if possible" to true and all the other page break options for the tablix and row groups to false, to no avail.
Does anyone know of a trick or work around to make the large rows split over pages??
Setting Keep together on one page if possible to true/checked will cause SSRS to attempt to keep the row on one page, which means if the data spans across page breaks it will move that row to start on a new page so that it can be seen on one page, which would introduce white space where the row would be if the table was contiguous. So you need this setting set to False/Unchecked.
Next, ensure that the row group proeprty Keep together is set to False. This can't be accessed through the normal dialog box. If you don't have the properties pane showing in BIDS, then pressing F4 will bring this pane up. Select the row group(s), and ensure the property is appropriately set.
Also make sure that the text boxes inside the tablix are also set to KeepTogether=False. This will fix the problem.