I want to convert data from MySQL to HTML by using TCL.
The real problem converting mysql data to html,
showing that html in TCL viewer,
can I host IE inside TCL canvas or some widget anything etc. I want to develop adhoc HTML-reporting module for an assignment.
In short: I want to load/open/view HTML file in TCL. Any samples would be highly appreciated.
While you can't just make IE render on a canvas — too many things interact in unpleasant ways to make that impossible — you may well be able to use OpTcl to embed it in a window, which you can then put in a canvas if you choose.
Here's the informative example from that page:
package require optcl
optcl::new -window .htm {http://wiki.tcl.tk}
.htm config -width 800 -height 600
pack .htm
This will manufacture an instance of the COM object for handling an HTTP URL (in this case, http://wiki.tcl.tk) and embed it in a Tk widget (.htm). If you were going to embed it in a canvas, you'd do:
package require optcl
canvas .canv
optcl::new -window .canv.htm http://wiki.tcl.tk
.canv create window 0 0 -anchor nw -window .canv.htm
pack .canv
Well, that's the minimum. You'd really do a bit more (adding scrollbars, etc.)
There's a more extensive example on the Wiki too. (This doesn't appear to be a task for Tcom; that's designed to allow Tcl to interact with COM, but not really to allow Tk to embed widgets defined by it.) Be aware that I've not tested this on recent Windows systems or with recent versions of Tcl/Tk.
I want to convert data from MySQL to HTML by using TCL.
With data from a table, you may be better off using the TkTable widget, sidestepping the conversion to HTML entirely.
I want to load/open/view HTML file in TCL.
There is a Tk-widget called TkHTML, which seems like it'll do just what you need.
Related
In Objective C to build a Mac OSX (Cocoa) application, I'm using the native Webkit widget to display local files with the file:// URL, pulling from this folder:
MyApp.app/Contents/Resources/lang/en/html
This is all well and good until I start to need a German version. That means I have to copy en/html as de/html, then have someone replace the wording in the HTML (and some in the Javascript (like with modal dialogs)) with German phrasing. That's quite a lot of work!
Okay, that might seem doable until this creates a headache where I have to constantly maintain multiple versions of the html folder for each of the languages I need to support.
Then the thought came to me...
Why not just replace the phrasing with template tags like %CONTINUE%
and then, before the page is rendered, intercept it and swap it out
with strings pulled from a language plist file?
Through some API with this widget, is it possible to intercept HTML before it is rendered and replace text?
If it is possible, would it be noticeably slow such that it wouldn't be worth it?
Or, do you recommend I do a strategy where I build a generator that I keep on my workstation which builds each of the HTML folders for me from a main template, and then I deploy those already completed with my setup application once I determine the user's language from the setup application?
Through a lot of experimentation, I found an ugly way to do templating. Like I said, it's not desirable and has some side effects:
You'll see a flash on the first window load. On first load of the application window that has the WebKit widget, you'll want to hide the window until the second time the page content is displayed. I guess you'll have to use a property for that.
When you navigate, each page loads twice. It's almost not noticeable, but not good enough for good development.
I found an odd quirk with Bootstrap CSS where it made my table grid rows very large and didn't apply CSS properly for some strange reason. I might be able to tweak the CSS to fix that.
Unfortunately, I found no other event I could intercept on this except didFinishLoadForFrame. However, by then, the page has already downloaded and rendered at least once for a microsecond. It would be great to intercept some event before then, where I have the full HTML, and do the swap there before display. I didn't find such an event. However, if someone finds such an event -- that would probably make this a great templating solution.
- (void)webView:(WebView *)sender didFinishLoadForFrame:(WebFrame *)frame
{
DOMHTMLElement * htmlNode =
(DOMHTMLElement *) [[[frame DOMDocument] getElementsByTagName: #"html"] item: 0];
NSString *s = [htmlNode outerHTML];
if ([s containsString:#"<!-- processed -->"]) {
return;
}
NSURL *oBaseURL = [[[frame dataSource] request] URL];
s = [s stringByReplacingOccurrencesOfString:#"%EXAMPLE%" withString:#"ZZZ"];
s = [s stringByReplacingOccurrencesOfString:#"</head>" withString:#"<!-- processed -->\n</head>"];
[frame loadHTMLString:s baseURL:oBaseURL];
}
The above will look at HTML that contains %EXAMPLE% and replace it with ZZZ.
In the end, I realized that this is inefficient because of page flash, and, on long bits of text that need a lot of replacing, may have some quite noticeable delay. The better way is to create a compile time generator. This would be to make one HTML folder with %PARAMETERIZED_TAGS% inside instead of English text. Then, create a "Run Script" in your "Build Phase" that runs some program/script you create in whatever language you want that generates each HTML folder from all the available lang-XX.plist files you have in a directory, where XX is a language code like 'en', 'de', etc. It reads the HTML file, finds the parameterized tag match in the lang-XX.plist file, and replaces that text with the text for that language. That way, after compilation, you have several HTML folders for each language, already using your translated strings. This is efficient because then it allows you to have one single HTML folder where you handle your code, and don't have to do the extremely tedious process of creating each HTML folder in each language, nor have to maintain that mess. The compile time generator would do that for you. However -- you'll have to build that compile time generator.
I'm writing relatively complex iOS app that is very text heavy.
The text is also heavily formatted. It has lots of color, size, font, and spacing changes, as well bulleted lists and other text features you'd expect to see in a very rich website.
The text is displayed on about 40 different views. Some of which display a lot of text, others a little. There is no one template that all the pages follow. (There are some that are similar, but that's not the point.)
Lastly, the text is constantly being changed and updated by an editorial team during development, not so much after release. The text has to be stored on the device, downloading files is not an option.
My question is, what is the best way to store and then render all this text in an iOS App?
My approach
Store all the text content and formatting info in an html file and use
[[NSAttributedString alloc] initWithFileURL:htmlDoc
options:#{
NSDocumentTypeDocumentAttribute:NSHTMLTextDocumentType}
documentAttributes:&attrDict
error:&error];
to create a NSAttributed string and use that to populate UITextViews.*
*Note: I would do some more work before creating the UITextViews. First I would parse it to find the appropriate page number [[Page:1.3]] and then parse the elements in that section [[header]], [[side_scroller]], etc...
I like this approach for two main reasons:
It created a separate copy document that contained all the text
and formatting info.
I'm the only iOS developer, but we have a couple front-end
developers. So when we get slammed with changes that need to be done
in 3.45 minutes, I could have some of the guys help me make the
changes, without having to know all the nuances of UIFont and
related classes. Occasionally, the editors could even make the
changes themselves :)
Minor reasons for liking this approach:
The text can vary so much per page, that creating a new UIFont + Plist entry to store the formatting info seems like a bigger pain than having everything in a .html document. (I could be wrong about this.)
Project managers will inevitably say: "Make this word a little bigger," "This word looks strange, add italics," and "Make everything purple!" HTML/CSS seems like a more flexible solution for quickly implementing these requests.
Downsides of this approach:
NSAttributedString picks up 99% of the HTML attributes I threw at it. It did not pick bullet spacing changes in unordered lists <ul>.
Plists are more performant.
Here are some other approaches I considered:
Plist + UIFont
RTF Document - Originally started with this, but found it hid a lot of what was going on and NSAttributedString wouldn't pick up some of the changes.
XML
Any advice or input would very appreciated.
Notes:
iPad app,
iOS 7,
No Internet Connectivity,
Xcode 5
What I did to store styled text in an iOS app was to write a Mac OS command line tool that opens RTF files and converts them to attributed strings (It's a 1-line call in Mac OS, but not supported in iOS for some reason.) I then use NSCoding to save the attributed strings as binary data, with a special .DATA filetype.
I created a custom UITextView category with a method that knows how to load the text view's attributed text from my custom filetype.
I created a build rule in my project that treats RTF files as source files in a build step and the .DATA filetype as the output, and copies the .DATA files into the build project.
Now, all I have to do is add an RTF file to my project the build process inserts the .DATA version of the styled text into the executable.
The Xcode editor knows how to edit RTF files, so you can edit them right in place in the IDE, OR you can edit them in TextEdit or any editor that supports RTF files.
There are a few things you can put in an RTF that aren't supported in UITextViews. (I don't remember what those are offhand. Sorry.)
I find styled WYSIWYG text much easier to deal with than HTML. You just edit the text, and the build process picks up the changes.
It worked beautifully. Plus, binary NSCoding output is a whole lot more compact than HTML.
I would recommend using web view. It can open files in resource bundle.
You can disable all the links in HTML by implementing delegate method shouldStartLoadWithRequest to return NO.
You might also want to set dataDetectorTypes to UIDataDetectorTypeNone.
That will disable auto link detection in web view
Either with a headless browser, google filesytem API, or some other way.
This question says you can, but not how.
Converting d3.js SVG code to a standalone program -- any suggestions?
google groups has more hints, but no examples.
I've spent a bunch of time playing with the node-canvas example, as well as the phantomJS svg example. I can't figure out how to make them play together. Apparently in Linux, the x-windows Javascript rendering engine isn't very good anyway.
My API reading list of JavaScript, d3.js, SVG, CSS, and other HTML stuff is already mountainous - all I want to do is save a .svg image that I generate with d3.js.
Help, please.
This will neither be easy nor overtly complicated. Main reason being is that a web browser alone cannot save an SVG file from a DOM rendering, unless it's Chrome version 12.
Thing is that an SVG image is just a plain text file with a bunch of rendering instructions. The solution you point to basically says you would have to do this server side. Though they suggest node.js, you can do this in any server-side language you'd like.
Trick is to take your JavaScript/HTML interface, make it either keep track of all objects you create, or otherwise be able to serialize all of them, and then send that data (ex: via ajax) to a server-side program which would reconstitute that to an SVG file and offer it to be downloaded.
The challenge is that both your programs (client-side, javascript and server-side: php/etc.) will more or less have to re-implement SVG specifications to make this work and have common understanding as to how you serialized it for the transmission. There are virtually no stock components that do this for you.
There are some examples of using node().parentNode.innerHTML with 64B encoding, but I couldn't figure out how to use it.
https://groups.google.com/forum/?fromgroups#!topic/d3-js/aQSWnEDFxIc
The easiest solution I've found so far is FileSaver.js demo here:
http://eligrey.com/demos/FileSaver.js/
It uses the HTML5 filesaver interface.
I came across this today, I've not tried it but perhaps someone will find it useful:
https://github.com/d3-node/d3-node
const D3Node = require('d3-node')
const d3n = new D3Node() // initializes D3 with container element
d3n.createSVG(10,20).append('g') // create SVG w/ 'g' tag and width/height
d3n.svgString() // output: <svg width=10 height=20 xmlns="http://www.w3.org/2000/svg"><g></g></svg>
I know there is a list of similar questions but all handle pages without user interaction (static even though some js may be there).
Let's say we've a page the user can interact (e.g. svg than changes, or html tables with drilldown - content changes). Those interactions will change the page. Same happens in stackoverflow when entering the question...
The idea is adding a button, "convert to pdf" taking the state of the html and sending to the user back a pdf version (we've a Java server).
Using the print of the browser is not the answer I'm looking for :-).
Is this a stick in the moon ?
You would have to store the parameters that generate the HTML view (i.e. what the user clicks on, what selections they make, etc). If you can have a list of parameters that generate the HTML view, you can have a method which accepts the list of parameters (JSON post?), generates the HTML view and passes it to your PDF generating routine. I'm not too familiar with Java libraries for this purpose, but PHP has TCPDF can take html output to basically generate a PDF for you. Certainly, there are Java libraries which will allow you to do the same thing, or you can use the parameters to get a list of rows/arrays which can be iterated over and output using the PDF library of your choice.
Both iTextPDF and Aspose.PDF would allow you to do that (I've seen them used in two different projects), but there is no magic and you will have to do some work.
The steps are roughly:
Get (as a string) the part of the document which you want to print with jQuery or innerHTML
Call a service on the server side to convert this to PDF
[Serverside] Use a whitlist - based tool to clean up the hmtl (unless you want to be hacked). JSoup is great for that.
[Serverside] Use IText or Aspose API to create the PDF from the HTML (this is not trivial, you will have to read the doc)
Download the document
I'd also recommend DocRaptor, an HTML to PDF API built by my company, Expected Behavior.
DocRaptor uses Prince XML to generate PDFs, and thus produces higher quality results than similar products.
Adding PDF generation to your own web application using our service is as simple as making an HTTP POST request to our server.
Here's a link to DocRaptor's home page:
DocRaptor
And a link to our API documentation:
DocRaptor API documentation
Okay, so I've been utilizing HTML tidy to convert regular HTML webpages into XHTML suitable for parsing. The problem is the test page I saved in firefox had its html apparently somewhat precleaned by firefox during saving, call this File F. Html tidy works fine on file F, but fails on the raw data written to a file via .NET (file N). Html tidy is complaining about form tags being intermixed with table tags. The Html isn't mine so I can't just fix the source.
How do I clean up file N enough so that it can be run through Html tidy? Is there a standard way of hooking into Firefox (completely programmically without having to use mouse or keyboard) or another tool that will apply extra fixes to the html?
I had been using HTML tidy for some time, but then found that I was getting better results from TagSoup.
It can be used as a JAXP parser, converting non-wellformed HTML on the fly. I usually let it parse the input for Saxon XQuery transformations.
But it can also be used as a stand-alone utility, as an executable jar.
I wound up using SendKeys in C# and importing functions from user32.dll to set Firefox as the active window after launching it to the website I wanted (file:///myfilepathhere/).
SendKeys seemed to require running a windowed program, so I also added another executable which performs actions in its form_load() method.
By using alt+f, down six times, enter, wait for a bit, type full path file name, enter (twice) and then killing firefox, I was able to automate firefox's ability to clean some html up.