Related
I'm installing Apache server, php, and MySQL on Windows10.
First two was successful but MySQL has a problem.
I installed MySQL into C:\mysql-5.7.10-winx64, and changed my.ini like this
basedir = C:/mysql-5.7.10-winx64
datadir = C:/mysql-5.7.10-winx64/data
port = 3306
I succeeded install but if I try to start, it shows like below
C:\Windows\system32>net start mysql
The MySQL service is starting.
The MySQL service could not be started.
The service did not report an error.
More help is available by typing NET HELPMSG 3534.
However, if I check Computer Management>Event Viewer>Custom Views>Summary page events, it tells me "failed to set datadir to C:\mysql-5.7.10-winx64\data\"
If I make data folder manually, error message changed to
Can't open the mysql.plugin table
Please run mysql_upgrade to create it.." and some files are created in data folder
I tried to upgrade by typing mysql_upgrade but it failed.
mysql_upgrade: Got error: 2003: Can't connect to MySQL server on 'localhost' (10061) while connecting to the MySQL server. Upgrade process encountered error and will not continue.
How can I solve this issue?
Clear the "data" directory, then run command mysqld --initialize, and the command net start mysql, bingo!
1.For the error,
2003: Can't connect to MySQL server on 'localhost' (10061) while connecting to the MySQL server. Upgrade process encountered error and will not continue.
I ran the cmd as administrator and then go to \Program Files\MySQL\MySQL Server 5.7\bin\, and run
mysqld install
2.For the error,
C:\Program Files\MySQL\MySQL Server 5.7\bin>net start mysql
The MySQL service is starting.
The MySQL service could not be started.
The service did not report an error.
More help is available by typing NET HELPMSG 3534.
Try
mysqld --initialize
and then
net start mysql
Thanks to Athan's answer. Those combination worked for me.
I also had the same problem and I wasted hours solving the issue, but in the end this worked.
Go to you C:\ProgramData\MySQL\MySQL Server 5.7 and copy the my.ini file from there.
Go to C:\Program Files\MySQL\MySQL Server 5.7 and paste it there.
Open cmd and run net start mysql
It would work like a charm.
Explanation:
MySQL couldn't find my.ini, therefore tried to create data in Program Files... where it had no rights to do so, therefore it says access denied every time you run it.
This is old but I was running into the same problem you were seeing. I thought I'd share this answer for anyone looking. I created the data directory as you did initially and tried to start the service and got "Can't open and lock privilege tables: Table mysql.user doesn't exist." I then deleted the contents of the data directory and instead initialized the data directory by running the following command from the bin folder.
mysqld --initialize [with random root password]
mysqld --initialize-insecure [without random root password]
I had the same error, after checked this document: https://dev.mysql.com/doc/refman/8.0/en/data-directory-initialization.html
I just clear data directory and add the --console option to initialize:
bin\mysqld --defaults-file=C:\my.ini
--initialize --console
Hope this help
MySQL Server can either be run as a Program or as a Service. You cannot run both. You should stop 'mysqld' Server Program before starting 'mysqld' Server as Service.
The 'mysqld' Server Program can be stopped either by typing
'CTRL + c' or by issuing
'mysqladmin -u root -p shutdown' command and issue the password when prompted.
You need download from https://dev.mysql.com/downloads/mysql/ previous GA versions, and after that copy directory "data" to your new mysql or outher directory what you write in configfile my.ini in directory mysql-"version" .
For your error, main cause is in your my.ini setting.
Since you are installing MySQL on Windows, you should define path like:
basedir = C:\\mysql-5.7.10-winx64
datadir = C:\\mysql-5.7.10-winx64\\data
These slashes must be doubled.
Then start your MySQL service again. I guess this time would work.
And here is official document from MySQL.
This saved my life,
Just turn off the windows firewall and Give he port number correctly as 3306 as default, then restart MYSQL server . After that turn on the windows defender firewall
Just work it fine.
Looks like my solution is not added yet,
I've installed mysql80 , edited my.ini in windows notepad and got the same error like topic author "... NET HELPMSG 3534." when I start mysql service,
and my issue was in extra bytes added by notepad at the begining (EB BB BF) on my.ini, when I edited (added the same changes) my.ini in other editor everything worked fine.
I stopped the MySQL Service in Windows from TaskManager Option.
And then, I opend and Choosed the port number in "my-default.ini". like following (C:\Program Files\MySQL\MySQL Server 5.6\my-default.ini)
[mysqld]
port = 33062
Saved It.
Then I stated the service 'MySql' from the 'TaskManager'.
I checked the port number from 'mysql command' prompt. but port number is not changed to 33062. Instead of that default port number is there in the 'my.ini' file.
Please show the way to change it.
Steps to change the port number for MySQL Server 5.7 :
Stop the MySQL service from services.msc(To open services.msc go to run command and then type services.msc)
Go to the location C:\ProgramData\MySQL\MySQL Server 5.7 (ProgramData is a hidden folder. So you need to enable the hidden items from Folder Options).
In the MySQL Server 5.7 folder you will find my.ini file.
Open my.ini file and search for port.
Give your desired port number (like port=3632).
Save and exit my.ini file.(if it brings a file owner error, the quickest hack is to rename the file, edit it accordingly and then save the file as 'my.ini'. You can then proceed to delete the first renamed file.)
Then stat the service from the services.msc.
Follow the following simple steps
Rerun the installer by going to start > MySQL > MySQL Community Installer
https://i.stack.imgur.com/s78DN.png
Click on Reconfigure next to MySQL Server
Click and Next
Now change the port numbers to maybe 3309
https://i.stack.imgur.com/zs5Vu.png
Click Next change the password, test it and that ends it
I have an external HD and i'd like to run a 2nd mysql instance on it. I used the windows installer to install/configure mysqld as a service on windows7. I took the my.ini from
C:\Program Files\MySQL\MySQL Server 5.5\my.ini
Then edited the port (client and mysqld), datadir and innodb_data_home_dir. After running this command
"C:\Program Files\MySQL\MySQL Server 5.5\bin\mysqld" --defaults-file="f:/dev/my.ini"
I found an error which was all about the innodb_data_home_dir directory not existing. After that I ran the command again. Mysqld simply starts up for a second then immediately closes. I see no message in my command prompt. I know this command line args are correct as i see the mysqld service using the same one except a different my.ini path. Also it did tell me about the directory not existing so i know it is reading the new ini file.
How do i figure out why this 2nd instance of mysqld is closing? How do i get 2 instance running?
I'm using v 5.5
Mysql documentation is idiotic and their packaging is lacking (it is missing mysql_install_db). I have to download mysql-5.5.28-win32.zip (careful not mysql-5.5.28.zip under windows 32. Its source which is not mentioned at all) then copy performance_schema/ and mysql/ to the data directory THEN mysqld can run...
I installed MySQL using mysql-installer-5.5.20.0.msi on Windows 7.
From the cmd window, I run "mysqlshow -u root -p". It asked for a password, then returned this error: "Can't connect to MySQL server on 'localhost' (10061)" This is a bad indication of partially failed/successful installation.
After reading the page, http://dev.mysql.com/doc/refman/5.5/en/windows-troubleshooting.html, it told me to find an error log (.err) in C:\Program Files\MySQL\MySQL Server 5.5\data. The directory exists but there is no log file.
I have a feeling this is related to the tight security of Windows 7, especially when installing a Unix based software. And yes, I am the Administrator on my PC.
Any help or suggestions is appreciated. And I can return a favor by answering Java and SQL query questions.
Please Try the following steps:
c:\mysql\bin>mysqld --install
c:\mysql\bin>mysqld --initialize
then press "Windows key + R" write "services.msc", run as admin
start MySQL service.
I also faced the same issue and resolved it by below setups:
Check the MYSQL service in the windows service. If it is there and not running then start it. It will solve your problem.
You can find the services window by navigating to windows Start menu and typing 'services' in the search bar. Select the 'Services' option with the cogs next to it (not the executable file) and the below window will appear. Scroll down to find 'MySql (version)'. When you select MySql you should see an option in the left pane that says 'Start the service'. Click this and a dialogue should appear to indicate Windows is attempting to start the service. Once started the left pane will now give you the option to stop, pause and restart the service and you will now be able to connect to your MySql from the windows cmd line.
If MYSQL service is not present in windows service then follow below setups.
a. Open cmd as administrator.
b. cd to C:\Program Files (x86)\MySQL\MySQL Server 5.6\bin
c. Run the command:
C:\Program Files (x86)\MySQL\MySQL Server 5.6\bin>mysqld.exe --install
d. Check the MySql in the windows service, And if it is not running, Start it by clicking on the service.
e. If your using XAMMP . Start MySQL at the XAMMP control Panel.
this issue is very to solve by windows server users
go to this path
C:\Program Files\MySQL\MySQL Server 5.1\bin
run this tool "MySQLInstanceConfig.exe"
and config the instatnce again and problem solved
The simple solution that worked for me is: change localhost to 127.0.0.1 in your database.yml or in your script if writing one.
Here, you need to make sure that the MySQL service is running is Windows. It might be possible that your MySQL service is not running cuurrently.
Open Services window by pressing Windows+R and entering services.msc
Find out MySQL right click and select start.
It works.
I had this error - stupid mistake was, I was using -p3307 to specify port, whereas I should have used -P3307, i.e. capital P. Small 'p' is for password arg :)
In Windows 7
press Windows+R it opens Run
Enter services.msc
Find out mysql right click and start
if mysql was not found
Run cmd as administrator
goto C:\Program Files (x86)\MySQL\MySQL Server 5.6\bin directory(to go back use cd..) and type mysqld.exe --install
follow step 3
That's all
I solved this by adding the following arguments to the command line string:
mysql --user username --password password --host localhost --port 3306 databasename < "system path to .sql file"
Without the --host and --port arguments, especially if you change the port to let's say 3307, which is a non default value, will cause this error.
I got this error in command prompt when I tried to open MySQL from cmd "mysql -u root -p"
Can't connect to MySQL server on 'localhost:3306' (10061)
It was because I changed my port during the installation of MySQL community server as I had XAMPP server installed and running as well which was not allowing me to use the port 3306.
So basically I had 2 MySQL servers installed in my system.
MySQL community server.
XAMPP server.
If anyone had this same issue this is how I fixed it.
Step 1: Reconfigure MySQL server to port 3306
Step 2: Reconfigure XAMPP to use a different port other than 3306
Note: Stop the XAMPP server before following the steps.
Step 1: Reconfigure MySQL server to port 3306
Click Start and open MySql installer - community
Click on reconfigure button in front of MySql server
Type 3306 in port. Execute and complete the installation.
Step 2: Reconfigure XAMPP to use a different port other than 3306
Open XAMPP and change the port other than 3306 in two files
my.ini under MySQL
and php.ini under Apache
Now everything seems to be working fine for me. I was able to get into MySQL community server from cmd and I can use XAMPP server as well.
I have Windows 8.1 and I too had this problem. My teacher told me it was probably because my MySQL server had stopped running. She told me to go into the Computer Management utility (right click the lower-most left hand corner of the screen on Windows 8.1 to access Computer Management). Then under Services and Applications, open up the Services and find MySQL. You should be able to right-click on MySQL and restart it.
In Start Menu, search for "mysql". Among the results, you should see the "MySQL Installer - Community". Run it.
MySQL Installer window will show up as shown below. Find "MySQL Server" under Product and click on "Reconfigure" link.
The MySQL Installer will show up (same one you used for the first MySQL Server installation). Go through all the steps.
After the MySQL Installer was finished, I started the MySQL service again. This time, the "Startup Message Log" on The MySQL Notifier was showing that the server started successfully:
https://www.howtosolutions.net/2017/08/fixing-mysql-10061-error-after-migration-of-database-files/
This is the easiest solution and worked for me.
Go to where you downloaded
"mysql-installer-web-community-8.0.19.0.msi", file for installing
mysql.
Run this by double clicking on it. (No need to uninstall anything)
Click on "reconfigure" beside the MySql server.
Agree everything which comes in middle, provide password for root where asked.
Finish. That's it you're good to go.
For the 5.7 version, I had the same problem and a simple fix did the trick. As Installed the workbench 5.7 there was another "software" of sorts called the "MySQL Installer Community". I ran this and ran the "Reconfigure" for the MySQL server. It took about a minute and the problem was no longer there.
Hope it works!.(Keep in mind i was using the 5.7 version)
Just turn off the firewall and remove the instance configuration. Add a new instance for the server.![Disable Firewall][1]
Give he port number correctly as 3306 as default
Solution 1:
For 32bit:
Run "mysql.exe" from: C:\Program Files\MySQL\MySQL Server 5.6\bin
For 64bit:
Run "MySQLInstanceConfig.exe" from: C:\Program Files\MySQL\MySQL Server 5.6\bin
Solution 2:
The error (2002) Can't connect to ... normally means that there is no
MySQL server running on the system or that you are using an incorrect
Unix socket file name or TCP/IP port number when trying to connect to
the server. You should also check that the TCP/IP port you are using
has not been blocked by a firewall or port blocking service.
The error (2003) Can't connect to MySQL server on 'server' (10061)
indicates that the network connection has been refused. You should
check that there is a MySQL server running, that it has network
connections enabled, and that the network port you specified is the
one configured on the server.
Source: http://dev.mysql.com/doc/refman/5.6/en/starting-server.html
Visit it for more information.
For anyone who have the same problem of "Can't connect to MySQL server on 'localhost' (10061) " or "Can't connect to MySQL server on '127.0.0.1' (10061) ".
You can install "MySQL Installer" and this is the link http://dev.mysql.com/downloads/windows/installer/5.6.html
and this is a tutoriel for more help https://www.youtube.com/watch?v=AqQc3YqfelE
it works for me and i wish to work for you too.
I had the same error. I resolved in this way
Go to start- MySQL Installer-community and run again the installer as a re-configuration(you will be asked so).
Once asked if you want make MySQL instance to run as a Windows service, check the box.
In case would do not work, try unistalling and installing again, and check the box to run MySQL as Windows service.
From what I've gathered this means the mysql service (mysqld) isn't running.
First make sure it is installed as a windows service : Run
"C:\Program Files\MySQL\MySQL Server 5.5\bin\mysqld" --install
from the command line.
Next, start it up :
services.msc > MySQL > start
If it fails to restart, then you can follow these steps :
open the command line as an administrator :
cmd.exe > open as administrator
run "C:\Program Files\MySQL\MySQL Server 5.7\bin\mysqld" --verbose
it should fail and put the error log in a directory named data under C:\Program Files\MySQL\MysSQL Server 5.7\ . If it fails to create data for some reason, do it manually under that directory and try again. If you can figure out what's missing from what's in that log, then good, you're done.
If you've still got no luck, this is how I did it :
goto C:\ProgramData\MySQL and copy the file named my.ini to C:\Windows\
try to start the service again from the command line :
"C:\Program Files\MySQL\MySQL Server 5.7\bin\mysqld" --verbose
If it doesn't display any error, than the service startup was successfull. If it's still not working, than delete that my.ini you just copied from C:\Windows and start the service from the command line once again.
it should work now
if it is showing error 2003 (HY000): Can't connect to MySQL server on localhost (10061) than
Search services.msc in run
goto mysql properties
copy the mysql service name
start cmd as administrator
write: net start mysqlservicename .i.e mysql57 or etc it will show mysql is starting.
For me, three steps solved this problem on windows 10:
I downloaded MySQL server community edition zip and extracted it in the D drive. After that I went to bin folder and did cmd on that folder. I followed the below steps and all works:
D:\tools\mysql-8.0.17-winx64\bin>mysqld -install
Service successfully installed.
D:\tools\mysql-8.0.17-winx64\bin>mysqld --initialize
D:\tools\mysql-8.0.17-winx64\bin>net start mysql
The MySQL service is starting...
The MySQL service was started successfully.
I too had this problem, its easy to solve:
Go to Control panel - System and maintenance - System - Advanced system settings - Environment variables - System variables - path - click edit - add
"c:\xampp\mysql\bin" - it should look like this :
\Program Files (x86)\NVIDIA Corporation\PhysX\Common;C:\Program Files (x86)\Intel\iCLS Client\;C:\Program Files\Intel\iCLS Client\;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\;C:\Program Files\Intel\Intel(R) Management Engine Components\DAL;C:\Program Files\Intel\Intel(R) Management Engine Components\IPT;C:\Program Files (x86)\Intel\Intel(R) Management Engine Components\DAL;C:\Program Files (x86)\Intel\Intel(R) Management Engine Components\IPT;C:\Program Files (x86)\Intel\OpenCL SDK\2.0\bin\x86;C:\Program Files (x86)\Intel\OpenCL SDK\2.0\bin\x64;C:\Program Files (x86)\Windows Live\Shared;C:\Program Files (x86)\QuickTime Alternative\QTSystem;c:\xampp\mysql\bin
And don't forget to start MySQL from control panel of Xampp.
I found the same error re occurring even after I tried all the above solutions given above. I had even tried version 5.7 and few more. Guys don't waste your time trying to fix it. Rather install version 5.5. It's working perfectly fine without any unnecessary error.
Well in my case I just opened services.msc using run and restarted 2 of the services related to mysql and it worked!
In case of Xampp Installation.
Go to your xampp installation and mysql folder, for my case: C:\xampp\mysql
Run the file "resetroot.bat" from cmd or explorer.
My installation started working!!!
The solution that fixed the issue was using the following steps:
In Start Menu, search for "mysql". Among the results, you should see the "MySQL Installer - Community". Run it.
MySQL Installer window will show up as shown below. Find "MySQL Server" under Product and click on "Reconfigure" link.
MySQL Installer Community
The MySQL Installer will show up (same one you used for the first MySQL Server installation). Go through all the steps.
After the MySQL Installer was finished, I started the MySQL service again.
Don't do useless stuff like reconfigure, stop MySQL and start MySQL in service.
Just reinstall the MYSQL server and again install it in your system.
Remember only uninstall MySQL server and nothing else.
All the problem will be solve automatically
The main reason for this kind of error is you might have uninstalled Mysql server application. Install it and then give it a go.
for who person that want use mysql or mariadb with out any error i suggest use version 5.5
just download a zip file mariadb-5.5.65-winx64.zip from https://downloads.mariadb.org/mariadb/5.5.65/ and to install follow this tutorial setp by step https://www.youtube.com/watch?v=uEPs6JsTZFc (this tutorial works well for version 5.5 too )
I had the same issue and basically resolved it by pointing to a specific port number that my MySQL server was running on. Below is the command. Please edit the code to fit your case i.e your port number,your mysql server username,your password.
mysql -u root -pYourMysqlRootPassword -P3307
Create the temp folder c:/mysqltmp
In my.ini file under [mysqld] add the line
tmpdir=c:/mysqltmp
Add full privileges to user NETWORK SERVICE for "C:\ProgramData\MySQL\MySQL Server X.Y\Data\ibdata1" file
Start service
These are steps for the same problem with MySQL5.7 and MySQL8.0 on Windows 10
Whenever I try to start MySQL by typing
> mysql -u root
I get the error
ERROR 2003(HY000): Can't connect to MySQL server on 'localhost' (10061)
How can I solve the problem above? I just downloaded MySQL and unzipped it in the E: drive. I have not done anything else. Do I have to make a connection first? If so, how can I do that?
Here is the ZIP file that I had downloaded: mysql-5.7.15-winx64.zip
Here are the steps to start MYSQL Server (mysql-5.7.15-winx64) for the first time on Windows:
Create a new folder named "data" in MYSQL installation directory (i.e. in the same location as where "bin" directory is located. For me it is: C:\programs\mysql-5.7.15-winx64\mysql-5.7.15-winx64. This location will vary as per the location where you have extracted the MYSQL zip file)
From here I will use my MYSQL folder location as reference. Go to: C:\programs\mysql-5.7.15-winx64\mysql-5.7.15-winx64\bin and execute the command: mysqld --initialize-insecure or mysqld --initialize depending on whether you want the server to generate a random initial password for the 'root'#'localhost' account.
To start the DB, go to: C:\programs\mysql-5.7.15-winx64\mysql-5.7.15-winx64\bin and execute mysqld --console You can see the start-up logs being printed.
To connect to DB, go to: C:\programs\mysql-5.7.15-winx64\mysql-5.7.15-winx64\bin and execute mysql -u root -p. When prompted, Enter password if it has been set or else just hit "Enter" button to connect
The MySQL server can be started manually from the command line. This can be done on any version of Windows.
To start the mysqld server from the command line, you should start a console window (or “DOS window”) and enter this command:
shell> "C:\Program Files\MySQL\MySQL Server 5.0\bin\mysqld"
The path to mysqld may vary depending on the install location of MySQL on your system.
You can stop the MySQL server by executing this command:
shell> "C:\Program Files\MySQL\MySQL Server 5.0\bin\mysqladmin" -u root shutdown
**Note : **
If the MySQL root user account has a password, you need to invoke mysqladmin with the -p option and supply the password when prompted.
This command invokes the MySQL administrative utility mysqladmin to connect to the server and tell it to shut down. The command connects as the MySQL root user, which is the default administrative account in the MySQL grant system. Note that users in the MySQL grant system are wholly independent from any login users under Windows.
If mysqld doesn't start, check the error log to see whether the server wrote any messages there to indicate the cause of the problem. The error log is located in the C:\Program Files\MySQL\MySQL Server 5.0\data directory. It is the file with a suffix of .err. You can also try to start the server as mysqld --console; in this case, you may get some useful information on the screen that may help solve the problem.
The last option is to start mysqld with the --standalone and --debug options. In this case, mysqld writes a log file C:\mysqld.trace that should contain the reason why mysqld doesn't start. See MySQL Internals: Porting to Other Systems.
Via MySQL Official Page
If the command prompt does not work in Windows, try the following:
1) Open services in Windows.
2) Then check the status for Mysql and if you found status nothing or blank then start the mysql service.
3) After then see whether the mysql is start or not .If it shows started then try to check mysql working.
It has worked for me when cmd commands were not working.
Run the command prompt as admin and cd to bin directory of MySQL
Generally it is (C:\Program Files\MySQL\mysql-5.6.36-winx64\bin)
Run command : mysqld --install. (This command will install MySQL services and if services already installed it will prompt.)
Run below commands to start and stop server
To start : net start mysql
To stop : net stop mysql
Run mysql command.
Enjoy !!
maybe
E:\mysql-5.1.39-win32\bin>mysql -u root -p
Type
C:\> "C:\Program Files\MySQL\MySQL Server 5.1\bin\mysqld" --console
to start the sql server and then test the client connection.
I was using MySQL Server 5.5 as a result I was missing the folder which majority of the answers made mention of in the bin folder. What I did instead was the following:
Open Explorer and make your way to C:\Program Files\MySQL\MySQL Server 5.5\bin or your MySQL installation directory.
Run the executable application MySQLInstanceConfig and follow the images below.
This solved my issue and I was able to access the database without any errors.
Start mysql server by command prompt
C:> "C:\Program Files\MySQL\MySQL Server 5.5\bin\mysqld" --console
Or alternative reach up to bin then
mysqld --console
It will start your server.
If you have mysql command line client available
click on it
it show enter your password :
Please enter your password.
Then you can access it.
You also need to configure and start the MySQL server. This will probably help
I tried following steps to run mysql server 5.6 on my windows 8.
Run command prompt as an administrator
go mysql server 5.6 installation directory (in my case: C:\Program Files (x86)\MySQL\MySQL Server 5.6\bin) copy that location
In Command prompt run "cd C:\Program Files (x86)\MySQL\MySQL Server 5.6\bin"
run "mysql -u root"
You need to run the server first. The command you use (in the question) starts a client to connect to the server but the server is not there so there the error.
Since I am not a Windows user (Linux comes equipped) so I might not be the best person to tell you how but I can point to you to a guide and another guide that show you how to get MySQL server up and running in Windows.
After you get that running, you can use the command (in the question) to connect it.
NOTE: You may also try http://www.apachefriends.org/en/xampp.html if you plan to use MySQL for web database development.
Hope this helps.
The error complains about localhost rather than permissions and the current practice in MySQL is to have a bind-address specifying localhost only in a configuration file.
So I don't think it's a password problem - except that you say you 'unzipped' MySQL.
Is that enough installation? What did you download?
Was there any installation step which allowed you to define a root password?
And, as NawaMan said, is the server running?
first thing you need to do is to start the mysql
for that you can use
E:\mysql-5.1.39-win32\bin>net start mysql (only when there a mysql running as service)
then you can execute
E:\mysql-5.1.39-win32\bin>mysql -u root
Run your command prompt as administrator.#
We can start MySQL service from windows command line using the below command.
net start mysql
Command to stop MySql service:
net stop mysql
Disable MySql service:
sc config mysql start= disabled
Command to enable MySql service(to automatically start MySQL service when the system starts up):
sc config mysql start= auto
Command to set the startup type to manual:
sc config mysql start= manual
How to restart MySql service?
There is no direct command to restart a service. You can combine stop and start commands like below.
net stop mysql & net start mysql
I was also having problem with starting MySql server but run command as mention right mark in picture . Its working fine .
mysql -u root -p
After entering this command in terminal, it will ask for password
Enter the password and you are ready to go!
there is one of the best solution do resolve this problem and it is going to work 100%.
as we know that server is a process so treat it like a process go to the task manager
in windows and see for services in task manager in that service see for Mysql and MS80 and try to start it manually by click on it and say run then will take some time.
go to your mysql workbench and click on start/shutdown then try to refresh the server status in server status option. it will load up thats it.
1.Open a command prompt as Administrator.
2.Go to MySQL installed bin directory in program files.
3.Copy the location of the bin directory from windows explorer.
4.In command prompt type cd and (paste the location) and do enter.
5.Type mysqld --initialize
6.Open services from the windows menu and sort the list by name.
7.Right-click Mysql and click start.
use the command "mysql -u root -p" in the bin folder path.
and give the MY SQL password which you have set earlier.