MySQL Table won't update multiple rows - mysql

I am not sure, but I think I have an error in this query:
UPDATE product_discount SET price = '10,15' WHERE key_id = '1,2'
I can't figure out why, but it only updates number 10 in the column and skips the 15.


I think this is what you need (Assuming Price should be 10 when key_id = 1):
UPDATE product_discount SET price = CASE WHEN key_id = 1 THEN 10 ELSE 15 END
WHERE key_id IN (1,2)


You could try the method suggested in this answer:
INSERT INTO product_discount (key_id, price)
VALUES (1, 10), (2, 15)
ON DUPLICATE KEY UPDATE price=VALUES(price);
Be sure to read the linked answer for some caveats, though; for example, this only works if:
There is a unique key constraint on key_id (e.g., it is the primary key)
You know that the rows with these ids already exist, or you don't mind inserting new rows if you provide an id that doesn't exist in the table
Despite these limitations on its use, the significant advantage of this method over CASE statements is much better readability and parameterization. In Python, for example, here's how you would execute the query given in #Kaf's answer using the MySQLdb module:
query = """UPDATE product_discount SET price = CASE
WHEN key_id = %s THEN %s ELSE %s
END
WHERE ID IN (%s, %s);"""
params = (1, 10, 15, 1, 2)
cursor.execute(query, params)
How long is it going to take someone to figure out from that params tuple which values you want updated, and what their values should be? And what if you want to update more than two rows? Not only do you need to rewrite query for every use case of N rows, the params tuple becomes indecipherable garbage if N is anything more than a handful. You could write some helper functions to format both query and params according to the number of updates you need to do, but how long will that take? How easy will it be to understand? How many opportunities for bugs will you introduce in all these extra lines of code?
On the other hand, here's how you would do it using the INSERT ... ON DUPLICATE KEY UPDATE method:
query = """INSERT INTO product_discount (key_id, price) VALUES (%s, %s)
ON DUPLICATE KEY UPDATE price=VALUES(price);"""
params = [(1, 10),
(2, 15),
]
cursor.executemany(query, params)
The key-value relationship is clear and highly readable. If more rows need to be updated, more key-value tuples can be added to the params list. It's not a perfect solution for every scenario, but it's a much better solution than CASE for particular (and I would argue, very common) scenarios.


I think Kaf was close, but there are times where key_id can be 3 or 4 or 5 right? So you need to make sure those values don't change to 15. This should do the trick!
UPDATE product_discount
SET price = CASE WHEN key_id = 1 THEN 10
WHEN key_id = 2 THEN 15
ELSE price END


I feel what you are trying to do is
update price = 10 when key_id = 1
(OR)
price=15 when key_id = 2.
In that case just do it like
UPDATE product_discount SET price =
CASE WHEN key_id = 1 THEN 10
WHEN key_id = 2 THEN 15
ELSE price
END

Related

mysql multiple update and insert query at once [duplicate]

I know that you can insert multiple rows at once, is there a way to update multiple rows at once (as in, in one query) in MySQL?
Edit:
For example I have the following
Name id Col1 Col2
Row1 1 6 1
Row2 2 2 3
Row3 3 9 5
Row4 4 16 8
I want to combine all the following Updates into one query
UPDATE table SET Col1 = 1 WHERE id = 1;
UPDATE table SET Col1 = 2 WHERE id = 2;
UPDATE table SET Col2 = 3 WHERE id = 3;
UPDATE table SET Col1 = 10 WHERE id = 4;
UPDATE table SET Col2 = 12 WHERE id = 4;

Yes, that's possible - you can use INSERT ... ON DUPLICATE KEY UPDATE.
Using your example:
INSERT INTO table (id,Col1,Col2) VALUES (1,1,1),(2,2,3),(3,9,3),(4,10,12)
ON DUPLICATE KEY UPDATE Col1=VALUES(Col1),Col2=VALUES(Col2);

Since you have dynamic values, you need to use an IF or CASE for the columns to be updated. It gets kinda ugly, but it should work.
Using your example, you could do it like:
UPDATE table SET Col1 = CASE id
WHEN 1 THEN 1
WHEN 2 THEN 2
WHEN 4 THEN 10
ELSE Col1
END,
Col2 = CASE id
WHEN 3 THEN 3
WHEN 4 THEN 12
ELSE Col2
END
WHERE id IN (1, 2, 3, 4);

The question is old, yet I'd like to extend the topic with another answer.
My point is, the easiest way to achieve it is just to wrap multiple queries with a transaction. The accepted answer INSERT ... ON DUPLICATE KEY UPDATE is a nice hack, but one should be aware of its drawbacks and limitations:
As being said, if you happen to launch the query with rows whose primary keys don't exist in the table, the query inserts new "half-baked" records. Probably it's not what you want
If you have a table with a not null field without default value and don't want to touch this field in the query, you'll get "Field 'fieldname' doesn't have a default value" MySQL warning even if you don't insert a single row at all. It will get you into trouble, if you decide to be strict and turn mysql warnings into runtime exceptions in your app.
I made some performance tests for three of suggested variants, including the INSERT ... ON DUPLICATE KEY UPDATE variant, a variant with "case / when / then" clause and a naive approach with transaction. You may get the python code and results here. The overall conclusion is that the variant with case statement turns out to be twice as fast as two other variants, but it's quite hard to write correct and injection-safe code for it, so I personally stick to the simplest approach: using transactions.
Edit: Findings of Dakusan prove that my performance estimations are not quite valid. Please see this answer for another, more elaborate research.

Not sure why another useful option is not yet mentioned:
UPDATE my_table m
JOIN (
SELECT 1 as id, 10 as _col1, 20 as _col2
UNION ALL
SELECT 2, 5, 10
UNION ALL
SELECT 3, 15, 30
) vals ON m.id = vals.id
SET col1 = _col1, col2 = _col2;

All of the following applies to InnoDB.
I feel knowing the speeds of the 3 different methods is important.
There are 3 methods:
INSERT: INSERT with ON DUPLICATE KEY UPDATE
TRANSACTION: Where you do an update for each record within a transaction
CASE: In which you a case/when for each different record within an UPDATE
I just tested this, and the INSERT method was 6.7x faster for me than the TRANSACTION method. I tried on a set of both 3,000 and 30,000 rows.
The TRANSACTION method still has to run each individually query, which takes time, though it batches the results in memory, or something, while executing. The TRANSACTION method is also pretty expensive in both replication and query logs.
Even worse, the CASE method was 41.1x slower than the INSERT method w/ 30,000 records (6.1x slower than TRANSACTION). And 75x slower in MyISAM. INSERT and CASE methods broke even at ~1,000 records. Even at 100 records, the CASE method is BARELY faster.
So in general, I feel the INSERT method is both best and easiest to use. The queries are smaller and easier to read and only take up 1 query of action. This applies to both InnoDB and MyISAM.
Bonus stuff:
The solution for the INSERT non-default-field problem is to temporarily turn off the relevant SQL modes: SET SESSION sql_mode=REPLACE(REPLACE(##SESSION.sql_mode,"STRICT_TRANS_TABLES",""),"STRICT_ALL_TABLES",""). Make sure to save the sql_mode first if you plan on reverting it.
As for other comments I've seen that say the auto_increment goes up using the INSERT method, this does seem to be the case in InnoDB, but not MyISAM.
Code to run the tests is as follows. It also outputs .SQL files to remove php interpreter overhead
<?php
//Variables
$NumRows=30000;
//These 2 functions need to be filled in
function InitSQL()
{
}
function RunSQLQuery($Q)
{
}
//Run the 3 tests
InitSQL();
for($i=0;$i<3;$i++)
RunTest($i, $NumRows);
function RunTest($TestNum, $NumRows)
{
$TheQueries=Array();
$DoQuery=function($Query) use (&$TheQueries)
{
RunSQLQuery($Query);
$TheQueries[]=$Query;
};
$TableName='Test';
$DoQuery('DROP TABLE IF EXISTS '.$TableName);
$DoQuery('CREATE TABLE '.$TableName.' (i1 int NOT NULL AUTO_INCREMENT, i2 int NOT NULL, primary key (i1)) ENGINE=InnoDB');
$DoQuery('INSERT INTO '.$TableName.' (i2) VALUES ('.implode('), (', range(2, $NumRows+1)).')');
if($TestNum==0)
{
$TestName='Transaction';
$Start=microtime(true);
$DoQuery('START TRANSACTION');
for($i=1;$i<=$NumRows;$i++)
$DoQuery('UPDATE '.$TableName.' SET i2='.(($i+5)*1000).' WHERE i1='.$i);
$DoQuery('COMMIT');
}
if($TestNum==1)
{
$TestName='Insert';
$Query=Array();
for($i=1;$i<=$NumRows;$i++)
$Query[]=sprintf("(%d,%d)", $i, (($i+5)*1000));
$Start=microtime(true);
$DoQuery('INSERT INTO '.$TableName.' VALUES '.implode(', ', $Query).' ON DUPLICATE KEY UPDATE i2=VALUES(i2)');
}
if($TestNum==2)
{
$TestName='Case';
$Query=Array();
for($i=1;$i<=$NumRows;$i++)
$Query[]=sprintf('WHEN %d THEN %d', $i, (($i+5)*1000));
$Start=microtime(true);
$DoQuery("UPDATE $TableName SET i2=CASE i1\n".implode("\n", $Query)."\nEND\nWHERE i1 IN (".implode(',', range(1, $NumRows)).')');
}
print "$TestName: ".(microtime(true)-$Start)."<br>\n";
file_put_contents("./$TestName.sql", implode(";\n", $TheQueries).';');
}

UPDATE table1, table2 SET table1.col1='value', table2.col1='value' WHERE table1.col3='567' AND table2.col6='567'
This should work for ya.
There is a reference in the MySQL manual for multiple tables.

Use a temporary table
// Reorder items
function update_items_tempdb(&$items)
{
shuffle($items);
$table_name = uniqid('tmp_test_');
$sql = "CREATE TEMPORARY TABLE `$table_name` ("
." `id` int(10) unsigned NOT NULL AUTO_INCREMENT"
.", `position` int(10) unsigned NOT NULL"
.", PRIMARY KEY (`id`)"
.") ENGINE = MEMORY";
query($sql);
$i = 0;
$sql = '';
foreach ($items as &$item)
{
$item->position = $i++;
$sql .= ($sql ? ', ' : '')."({$item->id}, {$item->position})";
}
if ($sql)
{
query("INSERT INTO `$table_name` (id, position) VALUES $sql");
$sql = "UPDATE `test`, `$table_name` SET `test`.position = `$table_name`.position"
." WHERE `$table_name`.id = `test`.id";
query($sql);
}
query("DROP TABLE `$table_name`");
}

Why does no one mention multiple statements in one query?
In php, you use multi_query method of mysqli instance.
From the php manual
MySQL optionally allows having multiple statements in one statement string. Sending multiple statements at once reduces client-server round trips but requires special handling.
Here is the result comparing to other 3 methods in update 30,000 raw. Code can be found here which is based on answer from #Dakusan
Transaction: 5.5194580554962
Insert: 0.20669293403625
Case: 16.474853992462
Multi: 0.0412278175354
As you can see, multiple statements query is more efficient than the highest answer.
If you get error message like this:
PHP Warning: Error while sending SET_OPTION packet
You may need to increase the max_allowed_packet in mysql config file which in my machine is /etc/mysql/my.cnf and then restart mysqld.

There is a setting you can alter called 'multi statement' that disables MySQL's 'safety mechanism' implemented to prevent (more than one) injection command. Typical to MySQL's 'brilliant' implementation, it also prevents user from doing efficient queries.
Here (http://dev.mysql.com/doc/refman/5.1/en/mysql-set-server-option.html) is some info on the C implementation of the setting.
If you're using PHP, you can use mysqli to do multi statements (I think php has shipped with mysqli for a while now)
$con = new mysqli('localhost','user1','password','my_database');
$query = "Update MyTable SET col1='some value' WHERE id=1 LIMIT 1;";
$query .= "UPDATE MyTable SET col1='other value' WHERE id=2 LIMIT 1;";
//etc
$con->multi_query($query);
$con->close();
Hope that helps.

You can alias the same table to give you the id's you want to insert by (if you are doing a row-by-row update:
UPDATE table1 tab1, table1 tab2 -- alias references the same table
SET
col1 = 1
,col2 = 2
. . .
WHERE
tab1.id = tab2.id;
Additionally, It should seem obvious that you can also update from other tables as well. In this case, the update doubles as a "SELECT" statement, giving you the data from the table you are specifying. You are explicitly stating in your query the update values so, the second table is unaffected.

You may also be interested in using joins on updates, which is possible as well.
Update someTable Set someValue = 4 From someTable s Inner Join anotherTable a on s.id = a.id Where a.id = 4
-- Only updates someValue in someTable who has a foreign key on anotherTable with a value of 4.
Edit: If the values you are updating aren't coming from somewhere else in the database, you'll need to issue multiple update queries.

No-one has yet mentioned what for me would be a much easier way to do this - Use a SQL editor that allows you to execute multiple individual queries. This screenshot is from Sequel Ace, I'd assume that Sequel Pro and probably other editors have similar functionality. (This of course assumes you only need to run this as a one-off thing rather than as an integrated part of your app/site).

And now the easy way
update my_table m, -- let create a temp table with populated values
(select 1 as id, 20 as value union -- this part will be generated
select 2 as id, 30 as value union -- using a backend code
-- for loop
select N as id, X as value
) t
set m.value = t.value where t.id=m.id -- now update by join - quick

Yes ..it is possible using INSERT ON DUPLICATE KEY UPDATE sql statement..
syntax:
INSERT INTO table_name (a,b,c) VALUES (1,2,3),(4,5,6)
ON DUPLICATE KEY UPDATE a=VALUES(a),b=VALUES(b),c=VALUES(c)

use
REPLACE INTO`table` VALUES (`id`,`col1`,`col2`) VALUES
(1,6,1),(2,2,3),(3,9,5),(4,16,8);
Please note:
id has to be a primary unique key
if you use foreign keys to
reference the table, REPLACE deletes then inserts, so this might
cause an error

I took the answer from #newtover and extended it using the new json_table function in MySql 8. This allows you to create a stored procedure to handle the workload rather than building your own SQL text in code:
drop table if exists `test`;
create table `test` (
`Id` int,
`Number` int,
PRIMARY KEY (`Id`)
);
insert into test (Id, Number) values (1, 1), (2, 2);
DROP procedure IF EXISTS `Test`;
DELIMITER $$
CREATE PROCEDURE `Test`(
p_json json
)
BEGIN
update test s
join json_table(p_json, '$[*]' columns(`id` int path '$.id', `number` int path '$.number')) v
on s.Id=v.id set s.Number=v.number;
END$$
DELIMITER ;
call `Test`('[{"id": 1, "number": 10}, {"id": 2, "number": 20}]');
select * from test;
drop table if exists `test`;
It's a few ms slower than pure SQL but I'm happy to take the hit rather than generate the sql text in code. Not sure how performant it is with huge recordsets (the JSON object has a max size of 1Gb) but I use it all the time when updating 10k rows at a time.

The following will update all rows in one table
Update Table Set
Column1 = 'New Value'
The next one will update all rows where the value of Column2 is more than 5
Update Table Set
Column1 = 'New Value'
Where
Column2 > 5
There is all Unkwntech's example of updating more than one table
UPDATE table1, table2 SET
table1.col1 = 'value',
table2.col1 = 'value'
WHERE
table1.col3 = '567'
AND table2.col6='567'

UPDATE tableName SET col1='000' WHERE id='3' OR id='5'
This should achieve what you'r looking for. Just add more id's. I have tested it.

UPDATE `your_table` SET
`something` = IF(`id`="1","new_value1",`something`), `smth2` = IF(`id`="1", "nv1",`smth2`),
`something` = IF(`id`="2","new_value2",`something`), `smth2` = IF(`id`="2", "nv2",`smth2`),
`something` = IF(`id`="4","new_value3",`something`), `smth2` = IF(`id`="4", "nv3",`smth2`),
`something` = IF(`id`="6","new_value4",`something`), `smth2` = IF(`id`="6", "nv4",`smth2`),
`something` = IF(`id`="3","new_value5",`something`), `smth2` = IF(`id`="3", "nv5",`smth2`),
`something` = IF(`id`="5","new_value6",`something`), `smth2` = IF(`id`="5", "nv6",`smth2`)
// You just building it in php like
$q = 'UPDATE `your_table` SET ';
foreach($data as $dat){
$q .= '
`something` = IF(`id`="'.$dat->id.'","'.$dat->value.'",`something`),
`smth2` = IF(`id`="'.$dat->id.'", "'.$dat->value2.'",`smth2`),';
}
$q = substr($q,0,-1);
So you can update hole table with one query

MySQL CASE to update multiple columns

I would like to update multiple columns in my table using a case statement, but I cannot find how to do this (is this even possible). I came up with the following invalid reference query:
UPDATE tablename SET
CASE name
WHEN 'name1' THEN col1=5,col2=''
WHEN 'name2' THEN col1=3,col2='whatever'
ELSE col1=0,col2=''
END;
Is there any way of achieving the expected result with valid SQL?

UPDATE tablename
SET col1 = CASE WHEN name = 'name1' THEN 5
WHEN name = 'name2' THEN 3
ELSE 0
END
, col2 = CASE WHEN name = 'name1' THEN ''
WHEN name = 'name2' THEN 'whatever'
ELSE ''
END
;

I don't know of any clean way to do what you're asking. An equivalent valid SQL update would be:
UPDATE tablename SET
col1 = CASE name WHEN 'name1' THEN 5 WHEN 'name2' THEN 3 ELSE 0 END,
col2 = CASE name WHEN 'name1' THEN '' WHEN 'name2' THEN 'whatever' ELSE '' END;
Of course this isn't pretty and requires repeating the same cases (e.g. 'name1') multiple times, but I just don't think it's possible any other way.

If name has a unique index and your values are known to exist in the table, you can use this trick:
INSERT INTO tablename (name, col1, col2)
VALUES ('name1', 5, '')
, ('name2', 3, 'whatever')
ON DUPLICATE KEY UPDATE
col1 = VALUES(col1)
, col2 = VALUES(col2);
If there are any additional NOT NULL columns without a default value, you'll have to add dummy values for those. Just leave them out of the ON DUPLICATE KEY UPDATE and they'll be ignored.

You have two options that are covered in the different answers of this question:
UPDATE ... CASE
INSERT INTO ... ON DUPLICATE KEY
I had the following requirement:
bulk update 100000+ records with 4 column values
the source might have records that do not trigger the "ON DUPLICATE KEY" thus just inserting new data instead of just updating. At the same time I do not want these new records.
So there are two bad alternatives:
using UPDATE ... CASE for multiple columns makes this really expensive for the database when updating 100000+ records
using INSERT INTO ... ON DUPLICATE KEY might insert records that I do not want
My solution: Use INSERT INTO ... ON DUPLICATE KEY with dummy data, then delete all records that include column with the UNWANTED_INSERTED_DATA flag
I am inserting one column with UNWANTED_INSERTED_DATA as a flag where I can guarantee these values will never be part of any real data. The remaining columns are updated with the wanted data.
INSERT INTO tablename (name, col1, col2)
VALUES ('name1', 5, 'UNWANTED_INSERTED_DATA')
, ('name2', 3, 'UNWANTED_INSERTED_DATA')
ON DUPLICATE KEY UPDATE
name = VALUES(name)
, col1 = VALUES(col1)
; # DO NOT include the UNWANTED_INSERTED_DATA in the update part
The records I want only use update thus never receive the dummy data with UNWANTED_INSERTED_DATA column.
The records I do not want contain the dummy data.
I can then delete all unwanted inserted records with dummy data in one delete query:
DELETE FROM tablename WHERE col2 = 'UNWANTED_INSERTED_DATA'
This is a hacky solution but gets the job done with just two queries in two steps.

MySQl: triggering an insertion before updating, if the not existing

I'm not really familiar with MySQL. But for performance reasons i want to avoid checking if a row already exists. Currently I've got a table with 2 columns (num, count) and I do something like this:
SELECT num FROM numbers WHERE num = 123
then if row exists...
UPDATE numbers SET count = count + 456 WHERE num = 123
else if row not exists...
INSERT INTO numbers (num, count) VALUES (123, 456)
Is there a possibility to avoid always querying the table. Something like a trigger... In the end, i just want to make an UPDATE, so that insertion is done automatically. thanks in advance

You don't need to use triggers, all you have to do is add UNIQUE constraint to your num column and then:
INSERT INTO numbers SET num = 123, count = 456 ON DUPLICATE KEY UPDATE count = count + 1;
Also, don't use reserved words for column names such as COUNT.

MySQL INSERT IF (custom if statements)

First, here's the concise summary of the question:
Is it possible to run an INSERT statement conditionally?
Something akin to this:
IF(expression) INSERT...
Now, I know I can do this with a stored procedure.
My question is: can I do this in my query?
Now, why would I want to do that?
Let's assume we have the following 2 tables:
products: id, qty_on_hand
orders: id, product_id, qty
Now, let's say an order for 20 Voodoo Dolls (product id 2) comes in.
We first check if there's enough Quantity On Hand:
SELECT IF(
( SELECT SUM(qty) FROM orders WHERE product_id = 2 ) + 20
<=
( SELECT qty_on_hand FROM products WHERE id = 2)
, 'true', 'false');
Then, if it evaluates to true, we run an INSERT query.
So far so good.
However, there's a problem with concurrency.
If 2 orders come in at the exact same time, they might both read the quantity-on-hand before any one of them has entered the order.
They'll then both place the order, thus exceeding the qty_on_hand.
So, back to the root of the question:
Is it possible to run an INSERT statement conditionally, so that we can combine both these queries into one?
I searched around a lot, and the only type of conditional INSERT statement that I could find was ON DUPLICATE KEY, which obviously does not apply here.

INSERT INTO TABLE
SELECT value_for_column1, value_for_column2, ...
FROM wherever
WHERE your_special_condition
If no rows are returned from the select (because your special condition is false) no insert happens.
Using your schema from question (assuming your id column is auto_increment):
insert into orders (product_id, qty)
select 2, 20
where (SELECT qty_on_hand FROM products WHERE id = 2) > 20;
This will insert no rows if there's not enough stock on hand, otherwise it will create the order row.
Nice idea btw!

Try:
INSERT INTO orders(product_id, qty)
SELECT 2, 20 FROM products WHERE id = 2 AND qty_on_hand >= 20
If a product with id equal to 2 exists and the qty_on_hand is greater or equal to 20 for this product, then an insert will occur with the values product_id = 2, and qty = 20. Otherwise, no insert will occur.
Note: If your product ids are note unique, you might want to add a LIMIT clause at the end of the SELECT statement.

Not sure about concurrency, you'll need to read up on locking in mysql, but this will let you be sure that you only take 20 items if 20 items are available:
update products
set qty_on_hand = qty_on_hand - 20
where qty_on_hand >= 20
and id=2
You can then check how many rows were affected. If none were affected, you did not have enough stock. If 1 row was affected, you have effectively consumed the stock.

You're probably solving the problem the wrong way.
If you're afraid two read-operations will occur at the same time and thus one will work with stale data, the solution is to use locks or transactions.
Have the query do this:
lock table for read
read table
update table
release lock

I wanted to insert into a table using values so I found this solution to insert the values using the IF condition
DELIMITER $$
CREATE PROCEDURE insertIssue()
BEGIN
IF (1 NOT IN (select I.issue_number from issue as I where I.series_id = 1)) THEN
INSERT IGNORE INTO issue ( issue_number, month_published, year_published, series_id, mcs_issue_id) VALUES (1, 1, 1990, 1, 1);
END IF;
END$$
DELIMITER ;
If you later on want to call the procedure it's as simple as
CALL insertIssue()
You can find more information about PROCEDURES and if conditions in this site

Multiple Updates in MySQL

I know that you can insert multiple rows at once, is there a way to update multiple rows at once (as in, in one query) in MySQL?
Edit:
For example I have the following
Name id Col1 Col2
Row1 1 6 1
Row2 2 2 3
Row3 3 9 5
Row4 4 16 8
I want to combine all the following Updates into one query
UPDATE table SET Col1 = 1 WHERE id = 1;
UPDATE table SET Col1 = 2 WHERE id = 2;
UPDATE table SET Col2 = 3 WHERE id = 3;
UPDATE table SET Col1 = 10 WHERE id = 4;
UPDATE table SET Col2 = 12 WHERE id = 4;

Yes, that's possible - you can use INSERT ... ON DUPLICATE KEY UPDATE.
Using your example:
INSERT INTO table (id,Col1,Col2) VALUES (1,1,1),(2,2,3),(3,9,3),(4,10,12)
ON DUPLICATE KEY UPDATE Col1=VALUES(Col1),Col2=VALUES(Col2);

Since you have dynamic values, you need to use an IF or CASE for the columns to be updated. It gets kinda ugly, but it should work.
Using your example, you could do it like:
UPDATE table SET Col1 = CASE id
WHEN 1 THEN 1
WHEN 2 THEN 2
WHEN 4 THEN 10
ELSE Col1
END,
Col2 = CASE id
WHEN 3 THEN 3
WHEN 4 THEN 12
ELSE Col2
END
WHERE id IN (1, 2, 3, 4);

The question is old, yet I'd like to extend the topic with another answer.
My point is, the easiest way to achieve it is just to wrap multiple queries with a transaction. The accepted answer INSERT ... ON DUPLICATE KEY UPDATE is a nice hack, but one should be aware of its drawbacks and limitations:
As being said, if you happen to launch the query with rows whose primary keys don't exist in the table, the query inserts new "half-baked" records. Probably it's not what you want
If you have a table with a not null field without default value and don't want to touch this field in the query, you'll get "Field 'fieldname' doesn't have a default value" MySQL warning even if you don't insert a single row at all. It will get you into trouble, if you decide to be strict and turn mysql warnings into runtime exceptions in your app.
I made some performance tests for three of suggested variants, including the INSERT ... ON DUPLICATE KEY UPDATE variant, a variant with "case / when / then" clause and a naive approach with transaction. You may get the python code and results here. The overall conclusion is that the variant with case statement turns out to be twice as fast as two other variants, but it's quite hard to write correct and injection-safe code for it, so I personally stick to the simplest approach: using transactions.
Edit: Findings of Dakusan prove that my performance estimations are not quite valid. Please see this answer for another, more elaborate research.

Not sure why another useful option is not yet mentioned:
UPDATE my_table m
JOIN (
SELECT 1 as id, 10 as _col1, 20 as _col2
UNION ALL
SELECT 2, 5, 10
UNION ALL
SELECT 3, 15, 30
) vals ON m.id = vals.id
SET col1 = _col1, col2 = _col2;

All of the following applies to InnoDB.
I feel knowing the speeds of the 3 different methods is important.
There are 3 methods:
INSERT: INSERT with ON DUPLICATE KEY UPDATE
TRANSACTION: Where you do an update for each record within a transaction
CASE: In which you a case/when for each different record within an UPDATE
I just tested this, and the INSERT method was 6.7x faster for me than the TRANSACTION method. I tried on a set of both 3,000 and 30,000 rows.
The TRANSACTION method still has to run each individually query, which takes time, though it batches the results in memory, or something, while executing. The TRANSACTION method is also pretty expensive in both replication and query logs.
Even worse, the CASE method was 41.1x slower than the INSERT method w/ 30,000 records (6.1x slower than TRANSACTION). And 75x slower in MyISAM. INSERT and CASE methods broke even at ~1,000 records. Even at 100 records, the CASE method is BARELY faster.
So in general, I feel the INSERT method is both best and easiest to use. The queries are smaller and easier to read and only take up 1 query of action. This applies to both InnoDB and MyISAM.
Bonus stuff:
The solution for the INSERT non-default-field problem is to temporarily turn off the relevant SQL modes: SET SESSION sql_mode=REPLACE(REPLACE(##SESSION.sql_mode,"STRICT_TRANS_TABLES",""),"STRICT_ALL_TABLES",""). Make sure to save the sql_mode first if you plan on reverting it.
As for other comments I've seen that say the auto_increment goes up using the INSERT method, this does seem to be the case in InnoDB, but not MyISAM.
Code to run the tests is as follows. It also outputs .SQL files to remove php interpreter overhead
<?php
//Variables
$NumRows=30000;
//These 2 functions need to be filled in
function InitSQL()
{
}
function RunSQLQuery($Q)
{
}
//Run the 3 tests
InitSQL();
for($i=0;$i<3;$i++)
RunTest($i, $NumRows);
function RunTest($TestNum, $NumRows)
{
$TheQueries=Array();
$DoQuery=function($Query) use (&$TheQueries)
{
RunSQLQuery($Query);
$TheQueries[]=$Query;
};
$TableName='Test';
$DoQuery('DROP TABLE IF EXISTS '.$TableName);
$DoQuery('CREATE TABLE '.$TableName.' (i1 int NOT NULL AUTO_INCREMENT, i2 int NOT NULL, primary key (i1)) ENGINE=InnoDB');
$DoQuery('INSERT INTO '.$TableName.' (i2) VALUES ('.implode('), (', range(2, $NumRows+1)).')');
if($TestNum==0)
{
$TestName='Transaction';
$Start=microtime(true);
$DoQuery('START TRANSACTION');
for($i=1;$i<=$NumRows;$i++)
$DoQuery('UPDATE '.$TableName.' SET i2='.(($i+5)*1000).' WHERE i1='.$i);
$DoQuery('COMMIT');
}
if($TestNum==1)
{
$TestName='Insert';
$Query=Array();
for($i=1;$i<=$NumRows;$i++)
$Query[]=sprintf("(%d,%d)", $i, (($i+5)*1000));
$Start=microtime(true);
$DoQuery('INSERT INTO '.$TableName.' VALUES '.implode(', ', $Query).' ON DUPLICATE KEY UPDATE i2=VALUES(i2)');
}
if($TestNum==2)
{
$TestName='Case';
$Query=Array();
for($i=1;$i<=$NumRows;$i++)
$Query[]=sprintf('WHEN %d THEN %d', $i, (($i+5)*1000));
$Start=microtime(true);
$DoQuery("UPDATE $TableName SET i2=CASE i1\n".implode("\n", $Query)."\nEND\nWHERE i1 IN (".implode(',', range(1, $NumRows)).')');
}
print "$TestName: ".(microtime(true)-$Start)."<br>\n";
file_put_contents("./$TestName.sql", implode(";\n", $TheQueries).';');
}

UPDATE table1, table2 SET table1.col1='value', table2.col1='value' WHERE table1.col3='567' AND table2.col6='567'
This should work for ya.
There is a reference in the MySQL manual for multiple tables.

Use a temporary table
// Reorder items
function update_items_tempdb(&$items)
{
shuffle($items);
$table_name = uniqid('tmp_test_');
$sql = "CREATE TEMPORARY TABLE `$table_name` ("
." `id` int(10) unsigned NOT NULL AUTO_INCREMENT"
.", `position` int(10) unsigned NOT NULL"
.", PRIMARY KEY (`id`)"
.") ENGINE = MEMORY";
query($sql);
$i = 0;
$sql = '';
foreach ($items as &$item)
{
$item->position = $i++;
$sql .= ($sql ? ', ' : '')."({$item->id}, {$item->position})";
}
if ($sql)
{
query("INSERT INTO `$table_name` (id, position) VALUES $sql");
$sql = "UPDATE `test`, `$table_name` SET `test`.position = `$table_name`.position"
." WHERE `$table_name`.id = `test`.id";
query($sql);
}
query("DROP TABLE `$table_name`");
}

Why does no one mention multiple statements in one query?
In php, you use multi_query method of mysqli instance.
From the php manual
MySQL optionally allows having multiple statements in one statement string. Sending multiple statements at once reduces client-server round trips but requires special handling.
Here is the result comparing to other 3 methods in update 30,000 raw. Code can be found here which is based on answer from #Dakusan
Transaction: 5.5194580554962
Insert: 0.20669293403625
Case: 16.474853992462
Multi: 0.0412278175354
As you can see, multiple statements query is more efficient than the highest answer.
If you get error message like this:
PHP Warning: Error while sending SET_OPTION packet
You may need to increase the max_allowed_packet in mysql config file which in my machine is /etc/mysql/my.cnf and then restart mysqld.

There is a setting you can alter called 'multi statement' that disables MySQL's 'safety mechanism' implemented to prevent (more than one) injection command. Typical to MySQL's 'brilliant' implementation, it also prevents user from doing efficient queries.
Here (http://dev.mysql.com/doc/refman/5.1/en/mysql-set-server-option.html) is some info on the C implementation of the setting.
If you're using PHP, you can use mysqli to do multi statements (I think php has shipped with mysqli for a while now)
$con = new mysqli('localhost','user1','password','my_database');
$query = "Update MyTable SET col1='some value' WHERE id=1 LIMIT 1;";
$query .= "UPDATE MyTable SET col1='other value' WHERE id=2 LIMIT 1;";
//etc
$con->multi_query($query);
$con->close();
Hope that helps.

You can alias the same table to give you the id's you want to insert by (if you are doing a row-by-row update:
UPDATE table1 tab1, table1 tab2 -- alias references the same table
SET
col1 = 1
,col2 = 2
. . .
WHERE
tab1.id = tab2.id;
Additionally, It should seem obvious that you can also update from other tables as well. In this case, the update doubles as a "SELECT" statement, giving you the data from the table you are specifying. You are explicitly stating in your query the update values so, the second table is unaffected.

You may also be interested in using joins on updates, which is possible as well.
Update someTable Set someValue = 4 From someTable s Inner Join anotherTable a on s.id = a.id Where a.id = 4
-- Only updates someValue in someTable who has a foreign key on anotherTable with a value of 4.
Edit: If the values you are updating aren't coming from somewhere else in the database, you'll need to issue multiple update queries.

No-one has yet mentioned what for me would be a much easier way to do this - Use a SQL editor that allows you to execute multiple individual queries. This screenshot is from Sequel Ace, I'd assume that Sequel Pro and probably other editors have similar functionality. (This of course assumes you only need to run this as a one-off thing rather than as an integrated part of your app/site).

And now the easy way
update my_table m, -- let create a temp table with populated values
(select 1 as id, 20 as value union -- this part will be generated
select 2 as id, 30 as value union -- using a backend code
-- for loop
select N as id, X as value
) t
set m.value = t.value where t.id=m.id -- now update by join - quick

Yes ..it is possible using INSERT ON DUPLICATE KEY UPDATE sql statement..
syntax:
INSERT INTO table_name (a,b,c) VALUES (1,2,3),(4,5,6)
ON DUPLICATE KEY UPDATE a=VALUES(a),b=VALUES(b),c=VALUES(c)

use
REPLACE INTO`table` VALUES (`id`,`col1`,`col2`) VALUES
(1,6,1),(2,2,3),(3,9,5),(4,16,8);
Please note:
id has to be a primary unique key
if you use foreign keys to
reference the table, REPLACE deletes then inserts, so this might
cause an error

I took the answer from #newtover and extended it using the new json_table function in MySql 8. This allows you to create a stored procedure to handle the workload rather than building your own SQL text in code:
drop table if exists `test`;
create table `test` (
`Id` int,
`Number` int,
PRIMARY KEY (`Id`)
);
insert into test (Id, Number) values (1, 1), (2, 2);
DROP procedure IF EXISTS `Test`;
DELIMITER $$
CREATE PROCEDURE `Test`(
p_json json
)
BEGIN
update test s
join json_table(p_json, '$[*]' columns(`id` int path '$.id', `number` int path '$.number')) v
on s.Id=v.id set s.Number=v.number;
END$$
DELIMITER ;
call `Test`('[{"id": 1, "number": 10}, {"id": 2, "number": 20}]');
select * from test;
drop table if exists `test`;
It's a few ms slower than pure SQL but I'm happy to take the hit rather than generate the sql text in code. Not sure how performant it is with huge recordsets (the JSON object has a max size of 1Gb) but I use it all the time when updating 10k rows at a time.

The following will update all rows in one table
Update Table Set
Column1 = 'New Value'
The next one will update all rows where the value of Column2 is more than 5
Update Table Set
Column1 = 'New Value'
Where
Column2 > 5
There is all Unkwntech's example of updating more than one table
UPDATE table1, table2 SET
table1.col1 = 'value',
table2.col1 = 'value'
WHERE
table1.col3 = '567'
AND table2.col6='567'

UPDATE tableName SET col1='000' WHERE id='3' OR id='5'
This should achieve what you'r looking for. Just add more id's. I have tested it.

UPDATE `your_table` SET
`something` = IF(`id`="1","new_value1",`something`), `smth2` = IF(`id`="1", "nv1",`smth2`),
`something` = IF(`id`="2","new_value2",`something`), `smth2` = IF(`id`="2", "nv2",`smth2`),
`something` = IF(`id`="4","new_value3",`something`), `smth2` = IF(`id`="4", "nv3",`smth2`),
`something` = IF(`id`="6","new_value4",`something`), `smth2` = IF(`id`="6", "nv4",`smth2`),
`something` = IF(`id`="3","new_value5",`something`), `smth2` = IF(`id`="3", "nv5",`smth2`),
`something` = IF(`id`="5","new_value6",`something`), `smth2` = IF(`id`="5", "nv6",`smth2`)
// You just building it in php like
$q = 'UPDATE `your_table` SET ';
foreach($data as $dat){
$q .= '
`something` = IF(`id`="'.$dat->id.'","'.$dat->value.'",`something`),
`smth2` = IF(`id`="'.$dat->id.'", "'.$dat->value2.'",`smth2`),';
}
$q = substr($q,0,-1);
So you can update hole table with one query