How would I set a maximum lines to display in a BO 4 report? On each page, I'd like to show 20 account numbers in column 1 with item counts in the next columns. There are some good discussions on limiting the rows retrieved in a query (e.g., Limit number of result or rows returned in BO using WebI). Some suggestions include using sections with RowIndex()/20 to limit the lines to 20, so I tried adding a variable =Floor(RowIndex()/20). However, the lines in my report contain aggregated variables, and the row index counts all records retrieved. Thoughts?
One option:
Add a column on the far left of the block. Use the following formula:
=Floor(RunningCount([Account Number])/10)
(assuming, of course, that your dimension is named [Account Number])
Create a break on this column. (Report Element -> Table Layout -> Break -> Add Break). Go back to the same menu and click Manage Breaks. Click the "Start on a new page" checkbox.
This will create a block with a maximum of 20 rows per page. Unfortunately, there's no direct way to hide a column in WebI, so you'd be stuck with this ugly column. What you can do, however, is remove all borders, change the font to white-on-white, and reduce its width as much as possible.
Related
I have a report that lists parts required for a job, and then within each part it has rows that show locations and quantities of parts on-hand. The main list has a header (part number, description, quantity) which is only shown once at the top because it is not within the grouping. However, the second header (on-hand quantity, location) is within the grouping so it repeats. I would like it to only show once.
I have tried using the hide duplicates property for the header text boxes, but this still leaves blank rows. I have also tried setting the row visibility using a comparison between ReportItem!lblOnHand.Value and Previous(ReportItem!lblOnHand.Value) but this gives me an aggregate error.
This is what the report is displaying now:
You need to set the row visibility rather than the individual text boxes. Right-click the row header to access the setting..
You should (untested) be able to use the same logic as you have now. If this does not work then you will need to test if the group is the first group and use that in the expression, something like...
=Fields!Partnumber.Value <> FIRST(Fields!Partnumber.Value, "myGroupOrDatasetNameHere")
The above would hide thew row if the part number in the current context is not the same as the first part number in the group or dataset name specified.
I have created an SSRS table element where we have multiple grouped items like below generated in a Portrait mode.
Problem:
Whenever there are many items in a single group, some items in the group get spilled over to the next page. That is, a page break is applied.
Example,
If there are 3 groups in a table, and 2nd group contains 50 items, 30 are displayed on the first page, page breaks and then the remaining 20 are displayed on the second page and so on until all the remaining groups are displayed. This is a normal scenario which happens by default.
Expected Solution:
What is expected is, if the data region of any of the group spills over to the next page, then the whole group along with the group header needs to be shifted to the next page. The idea is to have the whole data region of the group stay together.
This is like a smart table (group split).
This is dynamic in nature in the sense, where if for a group with less rows, it fits and stays together on a single page, then page break doesn't happen.
I tried multiple options like below but none of them worked.
- Change the Keep Together flag of the Grouped rows and the Data Region to True.
- Add a page break after each row group using the Group properties.
Can someone please let me know if there is at all a way to achieve the smart page break like the one expected above?
You can't do that but there are two ways that you can do.
You can remove paging of SSRS report. to remove Paging by opening property window of report and set InteractiveSize's Height value to 0. it will remove paging of the report
You can repeat your Group header if there to another page as well so that user have idea about this data belongs to which group.
How do I get Page Number in Body Section of RDLC report. Globals!PageNumber can be used only inside either Report Header or Footer. What if I put Row number to my dataset and get the record number.
Limiting the number of records per page and do the visibility calculation based on the records number is the best solution so far that I've heard of.
Can anyone educate me on this logic?
Or is there any other workaround for this?
P.S:
Other so-called solution like using Custom code is not giving you the correct page number. It will always show 1.
There isn't really an easier way to get the page number in the body. I think working with the dataset row count is the only reliable way.
What I have here is a short SQL statement to get Project Status information:
SELECT * FROM PROJ_STATUS
So I'll add the row number as a field, and also divide it by the number of records I want per page and add 1 (giving me the page number of each row)
SELECT * , ((DENSE_RANK() OVER(ORDER BY PRS_ID) -1) / 3 ) +1 AS [CountRow] FROM PROJ_STATUS
Now in my report I've got a table showing the status names and if they are active or not... I'll also add the page number as a column.
Next put a list in the report and put the table inside it.
Then click the top left square corner on the list and in the properties window set the dataset to the one you are using.
Then right click on the row group in the list and set the grouping to the page number column.
And put page breaks in between instances.
And there you go!
Reason why the -1 for #4Star. See that without the -1 the 3rd row is on the second page.
If your dataset is a row per whatever you want to get page numbers for, then
=RowNumber("DataSet1")
will work.
This is the same as using
row_number() over (order by (select null))
as it gives you an arbitrary ordering for row numbers.
I have a basic Tablix in my report that currently renders as follows:
These are steps in a manufacturing process with the clock number of the person who performed them with date performed in the last two columns. However, sometimes steps are combined and performed together. In the example above, steps 10-20 are performed together, and 30-40 are performed together. So I would really like the report to be rendered like this:
I do have a column in my data called "StepRange" which in the above example would be "10-20" for the first two rows and "30-40" for the third and fourth rows. So when the value of StepRange is alike, I know those rows are performed together and henceforth the last two columns should be combined. My example shows only two rows being combined at a time, but it could be any number.
How can I make my report look like the second example above instead of the first?
Single Tablix Method
Rather than literal conditional merging, you can set the border style of a textbox using an expression to achieve a similar effect. There are a few steps, but none of them are particularly involved.
Create a parent group for StepRange. Do not add a header or footer, and delete the added column without removing the group.
Make sure that your properties panel is visible on the right of your screen. If not, check the "Properties" checkbox under the View ribbon.
Click on your first detail TextBox and expand the "BorderStyle" property. Set the "Top" property to the following expression:
=IIF(RunningValue(Field!Step.Value,CountDistinct,"StepRange")>1, "None", "Solid")
Set the Bottom property to "None".
Set the expression of the detail TextBox itself.
Replace FIELDNAME with the appropriate field:
=IIF(RunningValue(Field!Step.Value,CountDistinct,"StepRange")>1, "", Field!FIELDNAME.Value)
Repeat this process for each detail TextBox.
You may need to create a dummy row at the bottom with a black top border if you do not have a summation row. (optional)
The expression only evaluates to "Solid" for the first Step value within each StepRange group, so subsequent rows do not have a top border and appear undivided.
Nested Tablix Method
Using a nested Tablix is more straightforward. I have had some issues with them, including some rendering hiccups. But in a report this simple that may not be an issue at all.
Set up your main Tablix to group on StepRange.
Either clear or add a column to the left for the individual steps.
Select "Insert Table" from the toolbar and click on the empty cell.
Set the cells to your step and operation fields and delete the extra column.
The result should look roughly like this:
By default the inner Tablix will be detail grouped. If your detail rows are more granular than the "Step" field, go to the properties of the "(Detail)" group and add a Group Expression for Step.
You can also delete the inner header row if you don't want to see it repeated in the report.
This results in the employee fields actually being merged and spacing properly. If you don't use an aggregate function on those fields, their value will be that of the first row returned internally. Which is moot if their values are uniform across steps.
I have a report where I've specified the Columns property to 3.
I want the data I have from a single query to spread across these columns.
When I print the report however, I just get a single column that spans across multiple pages till the rows run out of data.
How do I tell rs that I want the data to wrap into the next two columns?
UPDATE: Ok, found a link on technet to give me a better explanation of multicolumns (e.g. newsletter style):
Multicolumn, newsletter-style reports
display report data down multiple
adjacent columns. A newsletter-style
layout applies to the entire report.
When you define more than one column
in a report, Report Designer
calculates the width of the columns in
the report, the width of the report,
and the width of the space between
columns based on the number of
columns. It then displays a reduced
design surface so that you can place
report items on the report that will
fit within the column. Note that the
layout of the entire report must be
placed on the reduced design surface.
Additional columns are displayed so
that you can verify that the number of
columns you defined will fit the page
size dimension. You can adjust page
size, padding, and margins to fit more
columns on the page.
Only PDF and Image renderers support
newsletter-style reports.
I still haven't quite figured out how to make the column wrap...but I'll look into it further on Monday.
I addressed my issue by:
Putting 3 Tablix in my SubReport
Adding a Count Aggregate in my SQL results
Doing % calculations in the Tablix filters
For example, Tablix one has a filter formula like this:
=IIF(Fields!MaxRowNumber.Value <= 10, 10, Fields!MaxRowNumber.Value * .4)
So, if only ten rows are returned, display those ten rows in column 1. If more than ten rows appear, then put 40% of the results in Tablix 1.
I do similar calculations for Tablix 2 and 3 to display the 30% in each Tablix respectively.
Feels like a bit of a hack...but it works.
So one approach is to use multiple tablix with a filter that checks RowNumber and accordingly displays particular records in each table.
The other way is called Newsletter-style report (link). This formatting is retained only when report is exported as PDF or Image. It can be previewed only when you select 'Print Layout' on the Preview tab in Visual Studio. Here is an example:
Create a new report with the foll. dataset: SELECT ID,NAME FROM TABLENAME
Add a new table to the report and select the ID and Name as columns
Click on the tablix and press F4 to edit the tablix properties. In the properties window, change the Size - set the width to 2in
Click on the report area outside the report page boundary and press F4 to edit the report properties. In the properties window, change the Column value to 3, and column spacing value to 0.1
On the report scroll to the right hand side, you will notice that there are 2 new columns (so totally 3 columns on the report - because you selected 3 in step 4 above). Now click on the margin at the start of the column 2 and pull it further to the left to bring it as close to the column 1. This is only to reduce the need for huge page size.
Right click on the report area outside the report page boundary and select Report Properties. Change the Page Size - Set the width to 10in
Preview the report. Now select the 'Print Layout' tab to see the result. This formatting is retained only when report is exported as PDF or Image.
As noted in points 5 and 6 - since the report body flows into multiple columns, you must ensure that the page size is at-least equal to -> ([Original report body size times the number of columns] + all the column spacing values). Otherwise it will look messy.