I've got a problem with a correlation inside a sub-query.
I have 2 tables :
- table1 : contains "groups" with a groupid, a groupename and a categoryid
- table2 : tells which people is member of which group (with fields: userid, groupid)
I would like to ask my database to give me :
all groups from a specific "category" with for each of them :
- the groupid, the groupname
- and a random selection of 4 members for each group
I followed the question MySQL select 10 random rows from 600K rows fast to generate 4 random members of a specific group.
It works well if I run the query separately.
but if I try to incorporate my sub-query inside my "general query" :
SELECT
g.groupid, g.groupname,
(
SELECT GROUP_CONCAT(table2.userid SEPARATOR ",")
FROM table2, (
SELECT userid AS uid
FROM table2
WHERE table2.groupid = g.groupid
ORDER BY RAND( )
LIMIT 4
) tmp
WHERE table2.userid = tmp.uid
) AS randomusers
FROM table1 AS g WHERE g.categoryid = ?
... I get a "Unknown column 'g.groupid' in 'where clause'" ERROR.
I tried to pass the subquery into a LEFT JOIN but I can't figure out how to do it properly as each of my attempts are unsuccessful.
Any help on this? Thanks :)
If I understood right, your query looks overly complicated
SELECT t1.groupid,
t1.groupname,
(SELECT GROUP_CONCAT(table2.userid) FROM table2 WHERE table2.userid = t1.userid ORDER BY RAND() LIMIT 4) AS `users`
FROM table1 AS t1
Have not tested it, but this query should return first four random elements for each group
Related
I am running this query on MySQL
SELECT ID FROM (
SELECT ID, msisdn
FROM (
SELECT * FROM TT2
)
);
and it is giving this error:
Every derived table must have its own alias.
What's causing this error?
Every derived table (AKA sub-query) must indeed have an alias. I.e. each query in brackets must be given an alias (AS whatever), which can the be used to refer to it in the rest of the outer query.
SELECT ID FROM (
SELECT ID, msisdn FROM (
SELECT * FROM TT2
) AS T
) AS T
In your case, of course, the entire query could be replaced with:
SELECT ID FROM TT2
I think it's asking you to do this:
SELECT ID
FROM (SELECT ID,
msisdn
FROM (SELECT * FROM TT2) as myalias
) as anotheralias;
But why would you write this query in the first place?
Here's a different example that can't be rewritten without aliases ( can't GROUP BY DISTINCT).
Imagine a table called purchases that records purchases made by customers at stores, i.e. it's a many to many table and the software needs to know which customers have made purchases at more than one store:
SELECT DISTINCT customer_id, SUM(1)
FROM ( SELECT DISTINCT customer_id, store_id FROM purchases)
GROUP BY customer_id HAVING 1 < SUM(1);
..will break with the error Every derived table must have its own alias. To fix:
SELECT DISTINCT customer_id, SUM(1)
FROM ( SELECT DISTINCT customer_id, store_id FROM purchases) AS custom
GROUP BY customer_id HAVING 1 < SUM(1);
( Note the AS custom alias).
I arrived here because I thought I should check in SO if there are adequate answers, after a syntax error that gave me this error, or if I could possibly post an answer myself.
OK, the answers here explain what this error is, so not much more to say, but nevertheless I will give my 2 cents, using my own words:
This error is caused by the fact that you basically generate a new table with your subquery for the FROM command.
That's what a derived table is, and as such, it needs to have an alias (actually a name reference to it).
Given the following hypothetical query:
SELECT id, key1
FROM (
SELECT t1.ID id, t2.key1 key1, t2.key2 key2, t2.key3 key3
FROM table1 t1
LEFT JOIN table2 t2 ON t1.id = t2.id
WHERE t2.key3 = 'some-value'
) AS tt
At the end, the whole subquery inside the FROM command will produce the table that is aliased as tt and it will have the following columns id, key1, key2, key3.
Then, with the initial SELECT, we finally select the id and key1 from that generated table (tt).
I have 2 sql table as follows:
First table t1:
Second table t2:
I need to calculate the count of "Number" column based on "Name" column from t1 and merge it with t2.
I wrote following code. But it seems not working
select *
from (
select Name, count(Number) as count
from t1
group by Name ) as a
join ( select *
from t2 ) as b
on a.Name = b.Name;
Can any one figure out what is wrong ? Thank you very much
I think you want to use SUM() instead of COUNT().
Because SUM() sums some integers, while COUNT() counts number of occurencies.
And as also stated in the comments, multiple columns with same names will create conflicts, so you have to select the wanted columns explicit (that is usually a good idea anyway).
You could obtain your wanted endgoal by this query:
select
SUM(Number),
t1.Name,
(select val1 FROM t2 WHERE t2.Name = t1.Name LIMIT 1) as val1
FROM t1
GROUP BY t1.Name
Example in sqlfiddle: http://sqlfiddle.com/#!9/04dddf/7
I am running this query on MySQL
SELECT ID FROM (
SELECT ID, msisdn
FROM (
SELECT * FROM TT2
)
);
and it is giving this error:
Every derived table must have its own alias.
What's causing this error?
Every derived table (AKA sub-query) must indeed have an alias. I.e. each query in brackets must be given an alias (AS whatever), which can the be used to refer to it in the rest of the outer query.
SELECT ID FROM (
SELECT ID, msisdn FROM (
SELECT * FROM TT2
) AS T
) AS T
In your case, of course, the entire query could be replaced with:
SELECT ID FROM TT2
I think it's asking you to do this:
SELECT ID
FROM (SELECT ID,
msisdn
FROM (SELECT * FROM TT2) as myalias
) as anotheralias;
But why would you write this query in the first place?
Here's a different example that can't be rewritten without aliases ( can't GROUP BY DISTINCT).
Imagine a table called purchases that records purchases made by customers at stores, i.e. it's a many to many table and the software needs to know which customers have made purchases at more than one store:
SELECT DISTINCT customer_id, SUM(1)
FROM ( SELECT DISTINCT customer_id, store_id FROM purchases)
GROUP BY customer_id HAVING 1 < SUM(1);
..will break with the error Every derived table must have its own alias. To fix:
SELECT DISTINCT customer_id, SUM(1)
FROM ( SELECT DISTINCT customer_id, store_id FROM purchases) AS custom
GROUP BY customer_id HAVING 1 < SUM(1);
( Note the AS custom alias).
I arrived here because I thought I should check in SO if there are adequate answers, after a syntax error that gave me this error, or if I could possibly post an answer myself.
OK, the answers here explain what this error is, so not much more to say, but nevertheless I will give my 2 cents, using my own words:
This error is caused by the fact that you basically generate a new table with your subquery for the FROM command.
That's what a derived table is, and as such, it needs to have an alias (actually a name reference to it).
Given the following hypothetical query:
SELECT id, key1
FROM (
SELECT t1.ID id, t2.key1 key1, t2.key2 key2, t2.key3 key3
FROM table1 t1
LEFT JOIN table2 t2 ON t1.id = t2.id
WHERE t2.key3 = 'some-value'
) AS tt
At the end, the whole subquery inside the FROM command will produce the table that is aliased as tt and it will have the following columns id, key1, key2, key3.
Then, with the initial SELECT, we finally select the id and key1 from that generated table (tt).
I am running this query on MySQL
SELECT ID FROM (
SELECT ID, msisdn
FROM (
SELECT * FROM TT2
)
);
and it is giving this error:
Every derived table must have its own alias.
What's causing this error?
Every derived table (AKA sub-query) must indeed have an alias. I.e. each query in brackets must be given an alias (AS whatever), which can the be used to refer to it in the rest of the outer query.
SELECT ID FROM (
SELECT ID, msisdn FROM (
SELECT * FROM TT2
) AS T
) AS T
In your case, of course, the entire query could be replaced with:
SELECT ID FROM TT2
I think it's asking you to do this:
SELECT ID
FROM (SELECT ID,
msisdn
FROM (SELECT * FROM TT2) as myalias
) as anotheralias;
But why would you write this query in the first place?
Here's a different example that can't be rewritten without aliases ( can't GROUP BY DISTINCT).
Imagine a table called purchases that records purchases made by customers at stores, i.e. it's a many to many table and the software needs to know which customers have made purchases at more than one store:
SELECT DISTINCT customer_id, SUM(1)
FROM ( SELECT DISTINCT customer_id, store_id FROM purchases)
GROUP BY customer_id HAVING 1 < SUM(1);
..will break with the error Every derived table must have its own alias. To fix:
SELECT DISTINCT customer_id, SUM(1)
FROM ( SELECT DISTINCT customer_id, store_id FROM purchases) AS custom
GROUP BY customer_id HAVING 1 < SUM(1);
( Note the AS custom alias).
I arrived here because I thought I should check in SO if there are adequate answers, after a syntax error that gave me this error, or if I could possibly post an answer myself.
OK, the answers here explain what this error is, so not much more to say, but nevertheless I will give my 2 cents, using my own words:
This error is caused by the fact that you basically generate a new table with your subquery for the FROM command.
That's what a derived table is, and as such, it needs to have an alias (actually a name reference to it).
Given the following hypothetical query:
SELECT id, key1
FROM (
SELECT t1.ID id, t2.key1 key1, t2.key2 key2, t2.key3 key3
FROM table1 t1
LEFT JOIN table2 t2 ON t1.id = t2.id
WHERE t2.key3 = 'some-value'
) AS tt
At the end, the whole subquery inside the FROM command will produce the table that is aliased as tt and it will have the following columns id, key1, key2, key3.
Then, with the initial SELECT, we finally select the id and key1 from that generated table (tt).
I have the following problem and I would like to know how to solve it creating a query on MySQL.
Check out those two tables:
I need to follow a structure to show the results I want. It is like a randon inside a randon. For example, I want to randomize each section, but ids 1 to 3 must be together and then randomize too.
How would be a query to get such results?
With this query:
select id, id_start, id_end, rand() rnd
from table2
group by id, id_start, id_end
you can return a random number for each of the rows of table2.
Join this query to table1 and sort the result first by that random number and then by random:
select t1.id, t1.description
from table1 t1
inner join (
select id, id_start, id_end, rand() rnd
from table2
group by id, id_start, id_end
) t2
on t1.id between t2.id_start and t2.id_end
order by t2.rnd, rand()
See the demo.