I am running a multiple spring boot micro-services. All my services connect to database using spring-data(JPA repositories). Unfortunately due to particular API, deadlocks are occurring in database server. As per the primary investigation I feel the deadlock has happened because two transactions trying to modify the same table resource. Should any of it do with isolation levels of transaction.
Yet, I am not able to make concrete conclusion out of it. Can someone please figure out the root cause of this deadlock?
Please see the attached database logs of transactions leading to deadlock in below pictures.
Transaction1
Transaction2
FINAL UPDATE: We fixed this problem by finding a way to accomplish our goals without forking. But forking was the cause of the problem.
---Original Post---
I'm running a ruby on rails stack, our mysql server is separate, but housed at the same site as our app servers. (we've tried swapping it out for a different mysql server with double the specs, but no improvement was seen.
during business hours we get a handful of these from no particular query.
ActiveRecord::StatementInvalid: Mysql2::Error: Lost connection to MySQL server during query
most of the queries that fail are really simple, and there seems to be no pattern between one query and another. This all started when I upgraded from Rails 4.1 to 4.2.
I'm at a loss as to what to try. Our database server is less than 5% CPU throughout the day. I do get bug reports from users who have random interactions fail due to this, so it's not queries that have been running for hours or anything like that, of course when they retry the exact same thing it works.
Our servers are configured by cloud66.
So in short: our mysql server is going away for some reason, but it's not because of lack of resources, it's also a brand new server as we migrated from another server when this problem started.
this also happens to me on localhost while developing features sometimes, so I don't believe it's a load issue.
We're running the following:
ruby 2.2.5
rails 4.2.6
mysql2 0.4.8
UPDATE: per the first answer below I increased our max_connections variable to 500 last night, and confirmed the increase via
show global variables like 'max_connections';
I'm still getting dropped connection, the first one today was dropped only a few minutes ago....
ActiveRecord::StatementInvalid: Mysql2::Error: Lost connection to MySQL server during query
I ran select * from information_schema.processlist; and I got 36 rows back. Does this mean my app servers were running 36 connections at that moment? or can a process be multiple connections?
UPDATE: I just set net_read_timeout = 60 (it was 30 before) I'll see if that helps
UPDATE: It didn't help, I'm still looking for a solution...
Heres my Database.yml with credentials removed.
production:
adapter: mysql2
encoding: utf8
host: localhost
database:
username:
password:
port: 3306
reconnect: true
The connection to MySQL can be disrupted by a number of means, but I would recommend revisiting Mario Carrion's answer since it's a very wise answer.
It seems likely that connection is disrupted because it's being shared with the other processes, causing communication protocol errors...
...this could easily happen if the connection pool is process bound, which I believe it is, in ActiveRecord, meaning that the same connection could be "checked-out" a number of times simultaneously in different processes.
The solution is that database connections must be established only AFTER the fork statement in the application server.
I'm not sure which server you're using, but if you're using a warmup feature - don't.
If you're running any database calls before the first network request - don't.
Either of these actions could potentially initialize the connection pool before forking occurs, causing the MySQL connection pool to be shared between processes while the locking system isn't.
I'm not saying this is the only possible reason for the issue, as stated by #sloth-jr, there are other options... but most of them seem less likely according to your description.
Sidenote:
I ran select * from information_schema.processlist; and I got 36 rows back. Does this mean my app servers were running 36 connections at that moment? or can a process be multiple connections?
Each process could hold a number of connections. In your case, you might have up to 500X36 connections. (see edit)
In general, the number of connections in the pool can often be the same as the number of threads in each process (it shouldn't be less than the number of thread, or contention will slow you down). Sometimes it's good to add a few more depending on your application.
EDIT:
I apologize for ignoring the fact that the process count was referencing the MySQL data and not the application data.
The process count you showed is the MySQL server data, which seems to use a thread per connection IO scheme. The "Process" data actually counts active connections and not actual processes or threads (although it should translate to the number of threads as well).
This means that out of possible 500 connections per application processes (i.e., if you're using 8 processes for your application, that would be 8X500=4,000 allowed connections) your application only opened 36 connections so far.
This indicates a timeout error. It's usually a general resource or connection error.
I would check your MySQL config for max connections on MySQL console:
show global variables like 'max_connections';
And ensure the number of pooled connections used by Rails database.yml is less than that:
pool: 10
Note that database.yml reflects number of connections that will be pooled by a single Rails process. If you have multiple processes or other servers like Sidekiq, you'll need to add them together.
Increase max_connections if necessary in your MySQL server config (my.cnf), assuming your kit can handle it.
[mysqld]
max_connections = 100
Note other things might be blocking too, e.g. open files, but looking at connections is a good starting point.
You can also monitor active queries:
select * from information_schema.processlist;
as well as monitoring the MySQL slow log.
One issue may be a long-running update command. If you have a slow-running command that affects a lot of records (e.g. a whole table), it might be blocking even the simplest queries. This means you could see random queries timeout, but if you check MySQL status, the real cause is another long-running query.
Things you did not mention but you should take a look:
Are you using unicorn? If so, are your reconnecting and disconnecting in your after_fork and before_fork?
Is reconnect: true set in your database.yml configuration?
Well,at first glance this sounds like your webserver is keeping the mysql sessions open and sometimes a user runs into a timeout. Try disabling the keep mysql sessions alive.
It will be a hog but you only use 5% ...
other tipps:
Enable the mysql "Slow Query Log" and take a look.
write a short script which pulls and logs the mysql processlist every minute and cross check the log with timeouts
look at the pool size in your db connection or set one!
http://guides.rubyonrails.org/configuring.html#database-pooling
should be equal to the max-connections mysql likes to have!
Good luck!
Find out if your database is limited in terms of multiple connections. Because normally a SQL database is supposed to have more than one active connection.
(Contact your network provider)
Would you mind posting some of your queries? The MySQL documentation has this to say about it:
https://dev.mysql.com/doc/refman/5.7/en/error-lost-connection.html
TL;DR:
Network problems; are any of your boxes renewing leases
periodically, or experiencing other network connection errors
(netstat / ss), firewall timeouts, etc. Not sure how managed your
hosts are by cloud66....
Query timed out. This can happen if you've got commands backed up
behind blocking statements (eg, alters/locking backups on MyISAM
tables). How simple are your queries? No cartesian products in-play?
EXPLAIN query could help.
Exceeding MAX_PACKET_SIZE. Are you storing pictures, video content, etc.?
There are lots of possibilities here, and without more information, will be difficult to pinpoint this.
Would look first at mysql_error.log, then work your way from the DB server back to your application.
UPDATE: this didn't work.
Heres the solution, special thanks to #Myst for pointing out that forking can cause issues, I had no idea to look at this particular code. As the errors seemed random because we forked in this fashion in several places.
It turns out that when I was forking processes, rails was using the same database connection for all forked processes, This created a situation where when one of the processes (the parent process?) terminated the database connection, the remaining process would have its connection interrupted.
The solution was to change this code:
def recalculate_completion
Process.fork do
if self.course
self.course.user_groups.includes(user:[:events]).each do |ug|
ug.recalculate_completion
end
end
end
end
into this code:
def recalculate_completion
ActiveRecord::Base.remove_connection
Process.fork do
ActiveRecord::Base.establish_connection
if self.course
self.course.user_groups.includes(user:[:events]).each do |ug|
ug.recalculate_completion
end
end
ActiveRecord::Base.remove_connection
end
ActiveRecord::Base.establish_connection
end
Making this change stopped the errors from our servers and everything appears to be working well now. If anyone has any more info as to why this worked I would be happy to hear it, as I would like to have a deeper understanding of this.
Edit: it turns out this didn't work either.... we still got dropped connections but not as often.
If you have query cache enabled, please reset it and it should work.
RESET QUERY CACHE;
My application is installed on a client machine which is really really slow.
I'm getting errors like:
"Operation not allowed after ResultSet closed" (which I believe that occured due to timed out connections)
"Lock wait timeout exceeded;
try restarting transaction".
I would like to ensure that all of these errors caused to the slow machine by increasing MySQL timeouts.
My question is - which configurations should I change so that MySQL will be more tolerated to the slow environment.
Thanks
Well, you could try setting your innodb_lock_wait_timeout parameter in your my.ini file to resolve the second problem, but i dont really know how to fix the first one. More on innodb_lock_wait_timeout.
I've moved to mysql from sqlite and funny issue - whenever I mass-delete objects via django admin (about 100 or so) I get this mysql error:
(1205, 'Lock wait timeout exceeded; try restarting transaction')
this has never happened with sqlite with the same models.
I am able to delete a max of two records, three are failing.
The setup is windows7, mysql 5.5.20, python 2.7, django 1.3
That error is directly from MySQL. It happens when there's a lock created on the table and it isn't released for whatever reason. You can try restarting your MySQL server. That might be enough to clear things up and allow you to proceed. You can also edit your my.conf file (not sure of its location in Windows, but should be with the rest of your MySQL stuff) and change the following line to a longer time period (number is seconds):
innodb_lock_wait_timeout = 50
Turns out there may be many causes to this issue. My case was caused by indexes mixing up somehow - I was only able to fix this by recreating the database and importing data.
in general
show status
show engine innodb status
explain <select causing issues>
may give some hints.
I'm using SQLyog to sync a production database to a dev db. On 4 tables, I'm getting:
Error No. 1205 Lock wait timeout exceeded; try restarting transaction
Researching the web seems to indicate that a transaction has begun, locked tables, but has not committed. One post said to SHOW PROCESSLIST; but the only processes appear to be my own, via SQLyog.
I have also tried a Restart of MySQL, but that didn't help either.
As a relative novice in MySQL, I'm stuck: I can't determine what transaction or process is locking the tables, nor how to clear this situation.
Any suggestions would be gratefully accepted!
MTIA
Having the same problem on MySQL-cluster, I've solved (at least it looks being solved now - no fail have occured during last two days) it by performing commit/rollback after SELECTs too.
Export and re-import your database; this can often fix a lot of mysterious problems. You can do this through phpMyAdmin or from the command line.
This page at MediaTemple has a good set of instructions:
http://kb.mediatemple.net/questions/129/Export+and+import+MySQL+databases#gs
(Well, it worked for me!)