i have an error , when i want to create a trigger to check new entry in salle table
i have a salle table (nSalle,nbComputer,responsible)
i want to ckeck before insertion if nSalle is in ( 1,2,3,4,5) otherwise, i will restrict the insertion
i have created a trigger ,i have no error but when i insert a value != ( 1,2,3,4,5) i get it inserted witch is not what i want
her is my code so far
delimiter //
create trigger before_insert_salle before insert
on salle
for each row
begin
(nSalle,nbComputer,responsible)
if new.nSalle in (1,2,3,4,5) then
set new.nSalle = new.nSalle,
new.nbComputer = new.nbComupter,
new.responsible = new.responsible ;
end if ;
end //
when i insert a record like so
insert into salle values (10,20,'Joe') is works , witch is wrong 10 is not in (1,2,3,4,5 )
You want to signal an error when the constrain is violated. MySQL now lets you do this with signal:
delimiter //
create trigger before_insert_salle before insert
on salle
for each row
begin
declare msg varchar(255);
if new.nSalle not in (1,2,3,4,5) then
SET msg = concat('Constraint on nSalle violated: invalid value ', cast(new.nSalle as varchar(255)));
SIGNAL sqlstate '45000' SET message_text = msg;
end if ;
end //
The documentation on signal is here.
Related
I want to use Trigger in Mysql to be able to control "evaluation_weight" column in "evaluation_criteria" table. If the sum of the "evaluation_weight" column >= 100 after update/insert, it will not be possible to update/insert the newly entered value.
Here is the picture of "evaluation_criteria" table
You would need two triggers with one for update and another one for insert.
delimiter //
drop trigger if exists check_evaluation_insert ;
create trigger check_evaluation_insert before insert on evaluation_criteria for each row
begin
if (select ifnull(sum(evaluation_weight),0) from evaluation_criteria) + new.evaluation_weight>= 100 then
signal SQLSTATE VALUE '99999' SET MESSAGE_TEXT = 'The limit of evaluation_weight has been reached. INSERT fails. ';
end if;
end//
drop trigger if exists check_evaluation_update ;
create trigger check_evaluation_update before update on evaluation_criteria for each row
begin
if (select ifnull(sum(evaluation_weight),0) from evaluation_criteria) + new.evaluation_weight - old.evaluation_weight>= 100 then
signal SQLSTATE VALUE '99999' SET MESSAGE_TEXT = 'The limit of evaluation_weight has been reached. UPDATE fails. ';
end if;
end//
delimiter ;
If I have a trigger before the update on a table, how can I throw an error that prevents the update on that table?
As of MySQL 5.5, you can use the SIGNAL syntax to throw an exception:
signal sqlstate '45000' set message_text = 'My Error Message';
State 45000 is a generic state representing "unhandled user-defined exception".
Here is a more complete example of the approach:
delimiter //
use test//
create table trigger_test
(
id int not null
)//
drop trigger if exists trg_trigger_test_ins //
create trigger trg_trigger_test_ins before insert on trigger_test
for each row
begin
declare msg varchar(128);
if new.id < 0 then
set msg = concat('MyTriggerError: Trying to insert a negative value in trigger_test: ', cast(new.id as char));
signal sqlstate '45000' set message_text = msg;
end if;
end
//
delimiter ;
-- run the following as seperate statements:
insert into trigger_test values (1), (-1), (2); -- everything fails as one row is bad
select * from trigger_test;
insert into trigger_test values (1); -- succeeds as expected
insert into trigger_test values (-1); -- fails as expected
select * from trigger_test;
Here is one hack that may work. It isn't clean, but it looks like it might work:
Essentially, you just try to update a column that doesn't exist.
Unfortunately, the answer provided by #RuiDC does not work in MySQL versions prior to 5.5 because there is no implementation of SIGNAL for stored procedures.
The solution I've found is to simulate a signal throwing a table_name doesn't exist error, pushing a customized error message into the table_name.
The hack could be implemented using triggers or using a stored procedure. I describe both options below following the example used by #RuiDC.
Using triggers
DELIMITER $$
-- before inserting new id
DROP TRIGGER IF EXISTS before_insert_id$$
CREATE TRIGGER before_insert_id
BEFORE INSERT ON test FOR EACH ROW
BEGIN
-- condition to check
IF NEW.id < 0 THEN
-- hack to solve absence of SIGNAL/prepared statements in triggers
UPDATE `Error: invalid_id_test` SET x=1;
END IF;
END$$
DELIMITER ;
Using a stored procedure
Stored procedures allows you to use dynamic sql, which makes possible the encapsulation of the error generation functionality in one procedure. The counterpoint is that we should control the applications insert/update methods, so they use only our stored procedure (not granting direct privileges to INSERT/UPDATE).
DELIMITER $$
-- my_signal procedure
CREATE PROCEDURE `my_signal`(in_errortext VARCHAR(255))
BEGIN
SET #sql=CONCAT('UPDATE `', in_errortext, '` SET x=1');
PREPARE my_signal_stmt FROM #sql;
EXECUTE my_signal_stmt;
DEALLOCATE PREPARE my_signal_stmt;
END$$
CREATE PROCEDURE insert_test(p_id INT)
BEGIN
IF NEW.id < 0 THEN
CALL my_signal('Error: invalid_id_test; Id must be a positive integer');
ELSE
INSERT INTO test (id) VALUES (p_id);
END IF;
END$$
DELIMITER ;
The following procedure is (on mysql5) a way to throw custom errors , and log them at the same time:
create table mysql_error_generator(error_field varchar(64) unique) engine INNODB;
DELIMITER $$
CREATE PROCEDURE throwCustomError(IN errorText VARCHAR(44))
BEGIN
DECLARE errorWithDate varchar(64);
select concat("[",DATE_FORMAT(now(),"%Y%m%d %T"),"] ", errorText) into errorWithDate;
INSERT IGNORE INTO mysql_error_generator(error_field) VALUES (errorWithDate);
INSERT INTO mysql_error_generator(error_field) VALUES (errorWithDate);
END;
$$
DELIMITER ;
call throwCustomError("Custom error message with log support.");
CREATE TRIGGER sample_trigger_msg
BEFORE INSERT
FOR EACH ROW
BEGIN
IF(NEW.important_value) < (1*2) THEN
DECLARE dummy INT;
SELECT
Enter your Message Here!!!
INTO dummy
FROM mytable
WHERE mytable.id=new.id
END IF;
END;
Another (hack) method (if you are not on 5.5+ for some reason) that you can use:
If you have a required field, then within a trigger set the required field to an invalid value such as NULL. This will work for both INSERT and UPDATE. Do note that if NULL is a valid value for the required field (for some crazy reason) then this approach will not work.
BEGIN
-- Force one of the following to be assigned otherwise set required field to null which will throw an error
IF (NEW.`nullable_field_1` IS NULL AND NEW.`nullable_field_2` IS NULL) THEN
SET NEW.`required_id_field`=NULL;
END IF;
END
If you are on 5.5+ then you can use the signal state as described in other answers:
BEGIN
-- Force one of the following to be assigned otherwise use signal sqlstate to throw a unique error
IF (NEW.`nullable_field_1` IS NULL AND NEW.`nullable_field_2` IS NULL) THEN
SIGNAL SQLSTATE '45000' set message_text='A unique identifier for nullable_field_1 OR nullable_field_2 is required!';
END IF;
END
DELIMITER ##
DROP TRIGGER IF EXISTS trigger_name ##
CREATE TRIGGER trigger_name
BEFORE UPDATE ON table_name
FOR EACH ROW
BEGIN
--the condition of error is:
--if NEW update value of the attribute age = 1 and OLD value was 0
--key word OLD and NEW let you distinguish between the old and new value of an attribute
IF (NEW.state = 1 AND OLD.state = 0) THEN
signal sqlstate '-20000' set message_text = 'hey it's an error!';
END IF;
END ##
DELIMITER ;
i want to create a mysql trigger to manipulate a column
this is the code:
CREATE TRIGGER gestion_absences after update
ON Etudiant FOR EACH ROW
begin
if( NEW.Present = 'Non')
then
update Etudiant set Nbr_Absences = (OLD.Nbr_Absences) + 1 where (NEW.Present) = 'Non';
end if;
End;
the error is:
# 1064 - Syntax error near '' at line 6
I don't know where is the problem
I want when a student is absent , le number is incremented by 1;
if he's present , do nothing.
You cannot update the same table in your trigger AFTER updating it. However, you may create the trigger BEFORE update and set the correct values for Nbr_Absences if present is Non.
CREATE TRIGGER gestion_absences BEFORE UPDATE ON Etudiant
FOR EACH ROW
BEGIN
IF NEW.Present = 'Non' THEN
SET new.Nbr_Absences = old.Nbr_Absences + 1;
END IF;
END
;
Hi I need to write a trigger to check if the value is existing in a column, if yes then do not insert it and through and error.
There is a column which can have only two values(same as bool) DEFAULT or NONDEFAULT.
This column can have multiple NONDEFAULT value but only one DEFAULT value in column.
If the DEFAULT exists in table, we need to through an error and shall not insert the new row.
Kindly help
create trigger status_value before insert on TABLE for each row
begin
if new.status=DEFAULT AND select count(status) from TABLE where status=DEFAULT)
then
signal sqlstate = '4500'
set message_text = 'can not update, default value already present'
end if;
end;
Try it like this:
delimiter $$
create trigger status_value before insert on TABLE for each row
begin
if (new.status='DEFAULT' AND EXISTS (select 1 from TABLE where status='DEFAULT'))
then
signal sqlstate = '4500'
set message_text = 'can not update, default value already present';
end if;
end $$
delimiter ;
I'm assuming, that you mean the value of the column is a string "default", not the default value you defined when creating the table.
If I have a trigger before the update on a table, how can I throw an error that prevents the update on that table?
As of MySQL 5.5, you can use the SIGNAL syntax to throw an exception:
signal sqlstate '45000' set message_text = 'My Error Message';
State 45000 is a generic state representing "unhandled user-defined exception".
Here is a more complete example of the approach:
delimiter //
use test//
create table trigger_test
(
id int not null
)//
drop trigger if exists trg_trigger_test_ins //
create trigger trg_trigger_test_ins before insert on trigger_test
for each row
begin
declare msg varchar(128);
if new.id < 0 then
set msg = concat('MyTriggerError: Trying to insert a negative value in trigger_test: ', cast(new.id as char));
signal sqlstate '45000' set message_text = msg;
end if;
end
//
delimiter ;
-- run the following as seperate statements:
insert into trigger_test values (1), (-1), (2); -- everything fails as one row is bad
select * from trigger_test;
insert into trigger_test values (1); -- succeeds as expected
insert into trigger_test values (-1); -- fails as expected
select * from trigger_test;
Here is one hack that may work. It isn't clean, but it looks like it might work:
Essentially, you just try to update a column that doesn't exist.
Unfortunately, the answer provided by #RuiDC does not work in MySQL versions prior to 5.5 because there is no implementation of SIGNAL for stored procedures.
The solution I've found is to simulate a signal throwing a table_name doesn't exist error, pushing a customized error message into the table_name.
The hack could be implemented using triggers or using a stored procedure. I describe both options below following the example used by #RuiDC.
Using triggers
DELIMITER $$
-- before inserting new id
DROP TRIGGER IF EXISTS before_insert_id$$
CREATE TRIGGER before_insert_id
BEFORE INSERT ON test FOR EACH ROW
BEGIN
-- condition to check
IF NEW.id < 0 THEN
-- hack to solve absence of SIGNAL/prepared statements in triggers
UPDATE `Error: invalid_id_test` SET x=1;
END IF;
END$$
DELIMITER ;
Using a stored procedure
Stored procedures allows you to use dynamic sql, which makes possible the encapsulation of the error generation functionality in one procedure. The counterpoint is that we should control the applications insert/update methods, so they use only our stored procedure (not granting direct privileges to INSERT/UPDATE).
DELIMITER $$
-- my_signal procedure
CREATE PROCEDURE `my_signal`(in_errortext VARCHAR(255))
BEGIN
SET #sql=CONCAT('UPDATE `', in_errortext, '` SET x=1');
PREPARE my_signal_stmt FROM #sql;
EXECUTE my_signal_stmt;
DEALLOCATE PREPARE my_signal_stmt;
END$$
CREATE PROCEDURE insert_test(p_id INT)
BEGIN
IF NEW.id < 0 THEN
CALL my_signal('Error: invalid_id_test; Id must be a positive integer');
ELSE
INSERT INTO test (id) VALUES (p_id);
END IF;
END$$
DELIMITER ;
The following procedure is (on mysql5) a way to throw custom errors , and log them at the same time:
create table mysql_error_generator(error_field varchar(64) unique) engine INNODB;
DELIMITER $$
CREATE PROCEDURE throwCustomError(IN errorText VARCHAR(44))
BEGIN
DECLARE errorWithDate varchar(64);
select concat("[",DATE_FORMAT(now(),"%Y%m%d %T"),"] ", errorText) into errorWithDate;
INSERT IGNORE INTO mysql_error_generator(error_field) VALUES (errorWithDate);
INSERT INTO mysql_error_generator(error_field) VALUES (errorWithDate);
END;
$$
DELIMITER ;
call throwCustomError("Custom error message with log support.");
CREATE TRIGGER sample_trigger_msg
BEFORE INSERT
FOR EACH ROW
BEGIN
IF(NEW.important_value) < (1*2) THEN
DECLARE dummy INT;
SELECT
Enter your Message Here!!!
INTO dummy
FROM mytable
WHERE mytable.id=new.id
END IF;
END;
Another (hack) method (if you are not on 5.5+ for some reason) that you can use:
If you have a required field, then within a trigger set the required field to an invalid value such as NULL. This will work for both INSERT and UPDATE. Do note that if NULL is a valid value for the required field (for some crazy reason) then this approach will not work.
BEGIN
-- Force one of the following to be assigned otherwise set required field to null which will throw an error
IF (NEW.`nullable_field_1` IS NULL AND NEW.`nullable_field_2` IS NULL) THEN
SET NEW.`required_id_field`=NULL;
END IF;
END
If you are on 5.5+ then you can use the signal state as described in other answers:
BEGIN
-- Force one of the following to be assigned otherwise use signal sqlstate to throw a unique error
IF (NEW.`nullable_field_1` IS NULL AND NEW.`nullable_field_2` IS NULL) THEN
SIGNAL SQLSTATE '45000' set message_text='A unique identifier for nullable_field_1 OR nullable_field_2 is required!';
END IF;
END
DELIMITER ##
DROP TRIGGER IF EXISTS trigger_name ##
CREATE TRIGGER trigger_name
BEFORE UPDATE ON table_name
FOR EACH ROW
BEGIN
--the condition of error is:
--if NEW update value of the attribute age = 1 and OLD value was 0
--key word OLD and NEW let you distinguish between the old and new value of an attribute
IF (NEW.state = 1 AND OLD.state = 0) THEN
signal sqlstate '-20000' set message_text = 'hey it's an error!';
END IF;
END ##
DELIMITER ;