I have a named range that current refers to A1:I8 in a worksheet. I would like to change it to refer to a larger part of the worksheet. Does anyone know of a method in Aspose that does this? Or a method that lets me delete the existing range in Aspose?
You may try the following sample code for your reference:
Workbook workbook = new Workbook("e:\\test\\Book1.xlsx");
Worksheet sheetRef = workbook.Worksheets[0];
NameCollection names = workbook.Worksheets.Names;
Name name = names["MyRange"];
name.RefersTo = "=A1:J10";
Related
Here is my code, Im trying to get the oldmonthtab to copy itself and name itself to the newmonthname, but I just cant figure out how to get that last part to work.
var oldMonthName = SpreadsheetApp.getActiveSpreadsheet().getSheetByName("X2").getRange("U4").getValue();//name for the old month, formula in X2
var newMonthName = SpreadsheetApp.getActiveSpreadsheet().getSheetByName("X2").getRange("U3").getValue();//name for new month, formula in X2
var oldMonthTab = SpreadsheetApp.getActiveSpreadsheet().getSheetByName(oldMonthName);//old month tab, used to be able to hide it
var destination = SpreadsheetApp.openById('1lQ10rgciG5WiUQ0uVQc1E7r7Qwd6hOkZQSaH');//chooses this spreadsheet, the ID should come from the URL of the sheet it will be copied to.
oldMonthTab.copyTo(destination).setname(newMonthTab);//makes a copy of old month and sets the name to new month```
The variable newMonthTab is undefined. Use this:
oldMonthTab.copyTo(destination).setName(newMonthName);
I currently have a script that looks into multiple spreadsheets and pulls in data from a sheet contained within depending on user input.
Unfortunately there are times when users add new sheets in and do not follow the correct format for example each sheet should have four numbers, however sometimes a user will hit the space-bar before inputting those numbers.
Then when the script runs it will come back with an error because it can not find the sheet its looking for, so I need to build in a OR function, my code is quite long so I will type out an example of where I need the function below.
But for example if we can not find sheet "1234" I need to look for sheet " 1234"
var ss= getActiveSpreadsheet()
var sheet = '1234';
var altSheet = ' 1234'
var s1 = ss.getSheetByName(sheet)
//if sheet can not be found, I need to find altSheet instead
You can get the full list of sheets using getSheets(), then use the find() and trim() methods to find the correct one.
const s1 = ss.getSheets().find(sheet => sheet.getName().trim() === '1234');
I am an expert VBA programmer struggling to come to grips with Google Scripts in Google Sheets.
I'm trying to create a copy of the active file and name it from a Named Range. I can get it to copy, but the name of the new file ends up being "Range".
Here is the code I have.
function SaveFileAndCopy() {
var spreadsheet = SpreadsheetApp.getActive();
var rffilename = spreadsheet.getRangeByName("rfFileName");
spreadsheet.copy(rffilename);
};
In that case, how about the following modification?
From:
var rffilename = spreadsheet.getRangeByName("rfFileName");
To:
var rffilename = spreadsheet.getRangeByName("rfFileName").getValue();
In this case, please retrieve the cell value using getValue().
Or, you might be able to also use getDisplayValue() instead of getValue(), when you want to use the display value of the cell.
References:
getValue()
getDisplayValue()
I'm building a script that will ultimately take data from a csv file, populate a spreadsheet, use that spreadsheet to autofill a number of documents, and then automatically e-mail those documents to customers. It's also moving the documents from each time the script runs to a new folder with just that day's reports. I'm pretty new to Google Scripts, and this has been my learning project.
The steps I've got to work so far is the creation of documents for the spreadsheet with dummy data.
I ended up creating a second script to send e-mails which sends e-mails, but it is set up to look for all documents in the folder that are google docs, so it send a copy of every document to each customer. I thought that if I pointed the e-mail back to the original spreadsheet to grab just the correct document IDs (instead of the type) , I could only send customers the reports that belonged to them (all in PDF form). The step of creating a new folder and moving the documents into it afterwards works fine.
What I'm having an issue with is inputting data into my document ID column in the original spreadsheet. I have been able to watch it put the document ID of the first document into every row that has info to iterate over in the column, and then replace every row again with the second document's ID, etc.
I looked for ways to add data to a spreadsheet. Every method I've found so far involves creating a new column or row with new information from data within the spreadsheet. I need to put in data that I'm just now creating outside of the spreadsheet and then put it in the right place so I can point to it later.
I've gone over the methods within the documentation. It looks like .getCell.setvalue(variable) should work...if I could find a way to get the cell from the range (Which keeps showing me out of range).
function createDocument() {
var headers = Sheets.Spreadsheets.Values.get('17jXy9IlLt8C41tWEG5iQR31GjzOftlJs73y2L_0ZWNM', 'A1:P1');
var tactics = Sheets.Spreadsheets.Values.get('17jXy9IlLt8C41tWEG5iQR31GjzOftlJs73y2L_0ZWNM', 'A2:P');
var templateId = '1DU13OJHWyYnO5mLFovm97pWwXuU7ZTTDVJb2Mpdeebk';
for(var i = 0; i < tactics.values.length; i++){
var customer = tactics.values[i][0];
var pcname = tactics.values[i][1];
var date = tactics.values[i][2];
var virusvalue = tactics.values[i][3];
var cpuuse = tactics.values[i][4];
var ramuse = tactics.values[i][5];
var harddrive = tactics.values[i][6];
var netuse = tactics.values[i][7];
var downtime = tactics.values[i][8];
var cpuperform = tactics.values[i][9];
var ramperform = tactics.values[i][10];
var harddiskperform = tactics.values[i][11];
var reccomend = tactics.values[i][13];
var custID = tactics.values[i][14];
var newdoc = tactics.values[i][15];
//Make a copy of the template file
var documentID = DriveApp.getFileById(templateId).makeCopy(DriveApp.getFolderById('1zV-WpzUKoRurE9FnBcfjBygBA5rCO67I')).getId();
//rename the copied file
DriveApp.getFileById(documentID).setName('MCHA ' + customer + ' - ' + pcname);
Logger.log('value1 ' + documentID);
//THIS IS THE AREA I'M TRYING TO FIX
var ss = SpreadsheetApp.openById('113aqWVAjjUYCmI2oFc_BTbXkWMPFPjk_SschsKEx6qU');
var cell = ss.getRange('P2:P').getCell([i], [15]);
cell.setValue(documentID);
SpreadsheetApp.flush();
Logger.log('value2 ' + documentID);
//This area has code to replace the tags in the document with values from the spreadsheet. I cut it for not being relevant.
}
}
Obviously defining the range is just going to fill and autofill each cell. That code worked when I tried it
I originally tried using the variable from my earlier list for the autofill, but I've since realized that shouldn't work at all.
I tried to set the range of cells and then set the current cell by the same notation ([i][15] etc.) which throws an 'Range not found' error. I feel like I must be missing some syntax.
A link to the folder with all the documents is below, if that helps.
https://drive.google.com/drive/folders/1sRhti3R8R-Cym0hr2S4XkAVn3wyBbSRu?usp=sharing
I may not have entirely understood the problem you are facing. But I can see the cause of the 'Range not found' error.
Your loop starts with a value of 0 for i. This causes the script to look for a range called P0 in the first iteration.
One way to avoid that is to try :
var cell = ss.getRange("P"+(i+1));
For code efficiency, I'd also suggest moving some of the code outside the loop. For example, the following line runs each time in the loop. But it could be defined once outside the loop and then the variable ss could be reused inside the loop.
var ss = SpreadsheetApp.openById('113aqWVAjjUYCmI2oFc_BTbXkWMPFPjk_SschsKEx6qU');
Similarly, you could define the template file outside the loop and then sue it inside to make copies:
var templateFile = DriveApp.getFileById(templateId); // Outside the loop
And then inside the loop:
var documentID = templateFile.makeCopy(DriveApp.getFolderById('1zV-WpzUKoRurE9FnBcfjBygBA5rCO67I')).getId();
Google apps script best practices suggests minimising calls to the spreadsheet, i.e. get the data in one call, process it, and then post the data to the sheet in one call. More here.
Hope this helps.
I have an array of a couple (the array is up to 10) date/time that I want to write to a spreadsheet using getRange().setValues(). I'm converting the array to a string and it looks correct in Logger.
[Mon Feb 02 14:01:00 GMT-06:00 2015, Tue Feb 02 01:00:00 GMT-06:00 2016, , , , , , , , ]
When I try to write the string to a single cell in a sheet:
target6.setValues(source_range6_values);
I get this error:
Incorrect range width, was 10 but should be 1 (line 84, file "Code")
Edited 4/28/2014 adding entire script:
/**
* Copies source range and pastes at first empty row on target sheet
*/
function CopyIt(){
//Establishing source and target sheets
var source_spreadsheet = SpreadsheetApp.getActiveSpreadsheet();
var target_spreadsheet = SpreadsheetApp.openById("0AhCv9Xu_eRnSdHpLTkc0d1ZURUtyTU9oRjdFbmpMUFE");
// Get source and target sheets - can be the same or different
var sourcesheet = source_spreadsheet.getSheetByName("Form Responses");
var targetsheet = target_spreadsheet.getSheetByName("Work_Orders");
//Get row of last form submission
var source_last_row = sourcesheet.getLastRow();
// Check for answer to Do you need a Flyer Created? If No, end now. If Yes, continue.
var check = sourcesheet.getRange("T"+(source_last_row)).getValue();
if (check == 'Yes') {
//Pulling date(s) from the users form entry (source sheet) into an array
var daterange = sourcesheet.getRange("H"+source_last_row+":Q"+source_last_row);
//Getting the values of the array
var classDate = daterange.getValues();
//changing the array values to a string
classDate.toString();
//Building a new variable with the string to be inserted below in the target sheet
var source_range6_values = classDate;
//source_range6_values.toString();
Logger.log(classDate[0]);
// Get the last row on the target sheet
var last_row = targetsheet.getLastRow();
//Setting the target cell in the Marketing Work Order sheet
var target6 = targetsheet.getRange("U"+(last_row+1));
// Aadding a new row in the target sheet
targetsheet.insertRowAfter(last_row);
//Inserting the values of source_range6_values into the target sheet. Unfortunately it does not enter the data into the same field and it's in military time.
target6.setValue(source_range6_values);
Logger.log(source_range6_values);
}
}
To give a correct answer for your question, i guess i need to know how you get the value of source_range6_values.
One quick guess is you might want to use target6.setValue instead of target6.setValues since you want to write the data into one cell only...
A quick & dirty way would be to replace the commas(with spaces):
source = String(source_range6_values).replace("," , " ");
I've had fun with GAS and variables. Casting it as a String should let you use the string functions on it. If that doesn't work can you share a mock-up of your sheets so I can take a look?
edit:
I had to play around with it a bit, seems google's version of .replace() only replaces the first instance (and doesn't allow .replaceAll() ).
I edited your code starting on line 23:
//Getting the values of the array
var classDate = daterange.getValues().toString();
//Building a new variable with the string to be inserted below in the target sheet
//Google has bugs, .replace() seems to only replace the first instance
//-while {} loop replaces all of them
while (!classDate.equals(classDate.replace("," , " "))) { classDate = classDate.replace("," , " "); };
var source_range6_values = classDate;
All the dates are in one cell if you change only those lines (and no errors).
I appreciate the help you two have given me trying to answer this question. #swimmingwood fixed the actual capture of the data into a string, but it left commas and when I inserted it into the target sheet, it wrote it to multiple cells with an error. It did write to the sheet but the error had you use a CTRL-E (inside the taget sheet) to complete the insert and wrote them into separate cells.
#MickATX suggested the code to replace the commas in the string with a space, which would be fine, but apparently he discovered a Google scripting problem that would only allow for the first comma to be replaced and ignore the rest. Great knowledge never-the-less.
I ended up using a formula in an addition cell in the source sheet that looked like this:
=ArrayFormula(CONCATENATE(REPT(TEXT(H2:Q2,"mm/dd/yyyy hh:mm a")&CHAR(10),H2:Q2>0)))
This formula wrote all the date/time entries provided by the form entry into one cell of the source sheet and ONLY the number of entries (1-10). I then wrote that single cell to the target sheet via the script.
Thanks to #swimmingwood and #MickATX for trying to help me, both provided worthy knowledge.
I've read a couple of strange answers here...
If you write an 2D array to a sheet it will obviously be written accross multiple cells... commas are definitely not the issue but the nature of the object is.
Simply convert your array into a string using .toString() or .join() (the latter providing the advantage you can choose the separator to use) and setValue() (without S) at the place you want.
the commas you see in the logger are only typographic representation of array elements separators...
And, last point : the .join() or .toString() methods return new variables, they don't modify the original value so when you write classDate.toString(); you are not doing anything ...
you should write it like this :
classDateAsAString = classDate.toString();
finally your code :
function CopyIt(){
//Establishing source and target sheets
var source_spreadsheet = SpreadsheetApp.getActiveSpreadsheet();
var target_spreadsheet = SpreadsheetApp.openById("0AhCv9Xu_eRnSdHpLTkc0d1ZURUtyTU9oRjdFbmpMUFE");
// Get source and target sheets - can be the same or different
var sourcesheet = source_spreadsheet.getSheetByName("Form Responses");
var targetsheet = target_spreadsheet.getSheetByName("Work_Orders");
//Get row of last form submission
var source_last_row = sourcesheet.getLastRow();
// Check for answer to Do you need a Flyer Created? If No, end now. If Yes, continue.
var check = sourcesheet.getRange("T"+(source_last_row)).getValue();
if (check == 'Yes') {
//Pulling date(s) from the users form entry (source sheet) into an array
var daterange = sourcesheet.getRange("H"+source_last_row+":Q"+source_last_row);
//Getting the values of the array
var classDate = daterange.getValues();
var source_range6_values = classDate.join(' & ');// using & as separator for example
// Get the last row on the target sheet
var last_row = targetsheet.getLastRow();
//Setting the target cell in the Marketing Work Order sheet
var target6 = targetsheet.getRange("U"+(last_row+1));
// Adding a new row in the target sheet
targetsheet.insertRowAfter(last_row);
//Inserting the values of source_range6_values into the target sheet. Unfortunately it does not enter the data into the same field and it's in military time.
target6.setValue(source_range6_values);
Logger.log(source_range6_values);
}
}
Now if you want to format the dates in a more civilized way, that should be handled a bit differently... let me know if you still need it / want it.