I'm newbie on MS SQL and SSRS. I try to send report via mail and Windows File Share. But i'm getting this error.
Failure writing file \ogdtek\reports\Report2 : The network name
cannot be found
The log file is here. Where is the error? When reporting or saving to path(\ogdtek\reports\Report2). I can see report on
http://localhost/Reports/Pages/Report.aspx?ItemPath=%2fReportProject2%2fReport2
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access)
at Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareProvider.SaveReport(Notification notification, SubscriptionData d)
subscription!WindowsService_8!770!12/04/2013-01:27:16:: i INFO: Error writing file Report2 to path \\ogdtek\reports
notification!WindowsService_8!770!12/04/2013-01:27:16:: e ERROR: Error occurred processing subscription 068c6fdd-b076-4504-b3bc-9ce8459fce84: Failure writing file \\ogdtek\reports\Report2 : The network name cannot be found.
Thanks. Sorry for bad english
Try with (\ \ogdtek\reports\Report2) Without parenthesis.
I think you have missed the leading (\ )
Hi I was receiving this same error and it was driving me nuts. I ended up needing to enable the folder for sharing with the NETWORK SERVICE user. Not sure if this is proper/secure but worked for me...
I am using Windows 8.1 Pro and I went to the folder and right clicked. I then went to properties then the Sharing tab. Clicked Share... and added "NETWORK SERVICE" I also changed the permission level to Read/Write.
I also had given both the user that was accessing the folder and the network service full permission level, but you will probably only need to add the read write execute permissions. To do this right click on the folder again and go to the Security tab. Click Edit... then Add... Type your User in the textblock and click Check Names. Then OK. Then set the permission for that user. Do the same for NETWORK SERVICE.
One other thing I noticed is that I get an error if I try to save a report with a name of a file already in that folder. (Just a heads up...)
Related
I have a project that included 3 windows services, the services were worked very well, then for business needs, we need to move from windows server 2008 to windows server 2019.
The issue which I faced is:
When I install the services, It didn't start and returned the error in the Event Viewer:
Service cannot be started. System.Security.SecurityException: The source was not found, but some or all event logs could not be searched. Inaccessible logs: Security, State.
I searched for this issue and I found a lot of answers ( like this) but it won't help me.
I installed the services in Command Line as administrator using InstallUtil.exe.
Then opened the Registry Editor and give the user NETWORK SERVICE a full control in the path as below:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\eventlog\Application
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\eventlog\Security
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\eventlog
Then I check the subkey of the services in the path:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\EventLog\Application
Also, it exists.
My code related to EventLog :
public class EventViewer
{
public static void WriteEvent(string ServiceName, string msg, EventLogEntryType _EventLogEntryType)
{
EventLog eventLog = new EventLog();
eventLog.Source = ServiceName;
eventLog.Log = "Application";
((System.ComponentModel.ISupportInitialize)(eventLog)).BeginInit();
if (!EventLog.SourceExists(eventLog.Source))
{
EventLog.CreateEventSource(eventLog.Source, eventLog.Log);
}
((System.ComponentModel.ISupportInitialize)(eventLog)).EndInit();
eventLog.WriteEntry(msg, _EventLogEntryType);
}
}
The Event Viewer give me the line of the exception and it refers to:
((System.ComponentModel.ISupportInitialize)(eventLog)).BeginInit();
I tried to debug the service on my machine using Visual Studio 2019, but also give me the same error, and the service wouldn't start to debug using "Attach to Process".
I think the issue is while scanning the registry to check if the event source exist.
https://learn.microsoft.com/en-us/dotnet/api/system.diagnostics.eventlog.createeventsource?view=dotnet-plat-ext-6.0
As per Microsoft the account requires administrative privilege to do this task.
I have also seen there is a new registry hive under 'EventLog' called 'state' in windows 2019 which has less access compared to other hives.
Debug with process monitor and see if you are getting access denied in that hive.
I am trying to convert VMX to OVF format using OVFTool as below, however it gives error:
C:\Program Files\VMware\VMware OVF Tool>ovftool.exe
vi://vcenter.com:port/folder/myfolder/abc.vmx abc.ovf
Error: Failed to open file: https://vcenter.com:port/folder/myfolder/abc.vmx
Completed with errors
Please let me know if you have any solution.
I had a similar situation in vmware fusion trying to use a .vmx that was probably created on windows. I could boot the VM, but any attempt to export the machine with ovftool or use vmware-vdiskmanager bombed out with:
Error: Failed to open disk: source.vmdk
Completed with errors
the diskname was totally valid, path was valid, permissions were valid, and the only clue was running ovftool with:
ovftool --X:logToConsole --X:logLevel=verbose source.vmx dest.ova
Opening VMX source: source.vmx
verbose -[10C2513C0] Opening source
verbose -[10C2513C0] Failed to open disk: ./source.vmdk
verbose -[10C2513C0] Exception: Failed to open disk: source.vmdk. Reason: Disk encoding error
Error: Failed to open disk: source.vmdk
as others suggested, i took a peek in the .vmdk. therein i found 3 other clues:
encoding="windows-1252"
createType="monolithicSparse"
# Extent description
RW 16777216 SPARSE "source.vmdk"
so first i converted the monolithicSparse vmdk to "preallocated virtual disk split in 2GB files":
vmware-vdiskmanager -r source.vmdk -t3 foo.vmdk
then i could edit the "foo.vmdk" to change the encoding, which now looks like:
encoding="utf-8"
createType="twoGbMaxExtentFlat"
# Extent description
RW 8323072 FLAT "foo-f001.vmdk" 0
RW 8323072 FLAT "foo-f002.vmdk" 0
RW 131072 FLAT "foo-f003.vmdk" 0
and finally, after fixing up the source.vmx:
scsi0:0.fileName = "foo.vmdk"
profit:
ovftool source.vmx dest.ova
...
Opening VMX source: source.vmx
Opening OVA target: dest.ova
Writing OVA package: dest.ova
Transfer Completed
Completed successfully
I had a similar problem with OVFTool trying to export to OVF format.
Export failed: Failed to open file: C:\Virtual\test\test.vmx.
First, I opened .VMX file in editor (it's a text file) and made sure that settings like
scsi0:0.fileName = "test.vmdk"
nvram = "test.nvram"
extendedConfigFile = "test.vmxf"
mention proper file names.
Then I noticed this line:
.encoding = "windows-1251"
This is Cyrillic code page, so I modified it to use Western code page
.encoding = "windows-1252"
Then, running OVFTool gave a different error
Export failed: Failed to open disk: test.vmdk.
To fix it I had to open .VMDK file in HEX editor (because it's usually a big binary file), found there the string
encoding = "windows-1251"
(it's somewhere in the beginning of the file), and replaced "1251" with "1252".
And it did the trick!
In my case, was needed repair the disk 'abc.vmdk' before convert the 'abc.vmx' to 'abc.ovf'.
Use this for Linux:
$ /usr/bin/vmware-vdiskmanager -R /home/user/VMware/abc.vmdk
Look this link https://kb.vmware.com/s/article/2019259 for resolved issue in Windows and Linux
Try to run as described below.
C:\Program Files\VMware\VMware OVF Tool>ovftool C:\Win-Test\Win-Test.vmx(location of your vmx file) C:\Win-Test\win-test.ovf (destination)
Maybe ovftool is unable to recognize the path you are giving.
Try with following command:
ovftool --eula#=[path to eula] --X:logToConsole --targetType=OVA --compress=9 vi://[username]:[ESX address] [target address]
Once you provide the ESX address, it will list down the folders you have created in your ESX box. Then you can trigger the command above mentioned again with appending folder name.
If no folder hierarchy present in your box, then it will simply list down vm names.
Retry the same command appending [foldername]/[vmname no vmx file name required]
ovftool --eula#=[path to eula] --X:logToConsole --targetType=OVA --compress=9 vi://[username]:[ESX address]/[foldername if exist]/[vmname no vmx file name required] [target address]
I had this same exact issue. In my case I opened up the VMX file and dropped the IDE and sound controllers from the file and saved. I was then able to convert everything to an OVA using the tool with the standard syntax.
e.g. I dropped:
ide1:0.present = "TRUE"
ide1:0.deviceType = "cdrom-image"
and:
sound.present = "TRUE"
sound.fileName = "-1"
sound.autodetect = "TRUE"
This allowed me to convert the file like normal.
For me opening the .vmx and deleting the following line worked:
sata0:1.deviceType = "cdrom-image"
In my case, this works:
ide1:0.present = "TRUE"
ide1:0.deviceType = "cdrom-image"
I did change true to false and works fine, as cdrom-image not exist, this change permit the format conversion.
if your goal is to move a windows based vm to virtual box you only need to:
uninstall vmware tools from the guest vm
shut down the machine
copy the hd to a new folder
create a new empty vm in virtualbox
mount the hd (the .vmdk file) in that vm
Easy and rapid to do.
My Windows Store app keeps getting rejected from certification testing and I managed to reproduce a consequent crash when running appverif's LuaPriv-check. I get this output though:
AVRF: failed to create verifier log file \??\C:\Users\xx\AppVerifierLogs\yy.exe.0.dat (status C0000022)
Process Monitor tells me yy.exe got ACCESS DENIED on a CreateFile operation in this folder. I have set full access to all users (the user reported in the log was the same as the owner of the folder). I am running Visual Studio and Application Verifier as Administrator, but this does not seem to apply. What is the correct way of giving user xx full access to this folder on win8? I have attempted to use different log folders for appverify but with no success. Anyone else able to use this tool with Store-apps?
This post describes similar issues. Attempting to run AppVerif –sppath C:\MyLogsLocation as in the suggested workaround gives AVRF: Error: Incorrect image name: <
So does running appverif -enable handles locks -for myapp.exe -sppath c:\MyLogsLocation
It might be a bug in app verifier.
Have a look at these links:
http://social.technet.microsoft.com/Forums/en-US/5ed560c0-76af-401d-8150-8cd1e69d0b8a/why-app-verifier-can-not-create-log-file?forum=windowssdk
http://blogs.msdn.com/b/dougste/archive/2010/01/11/generating-application-verifier-logs-for-web-applications.aspx
0xc000022 is STATUS_ACCESS_DENIED. The process doesn't actually have write permissions, even if it looks like it should. This MSDN blog explains there is a bug in App Verifier so even if you specify -sppath the value won't be honoured unless you first delete the %WINDIR%\system32\config\AppVerifierLogs\ folder.
API Store is throwing errors when I try to create or edit an application
java.sql.SQLException: Can't call commit when autocommit=true
I've added the setting of
init-command='set autocommit=0'
to the my.cnf file
I've also added the flag:
?relaxAutoCommit=true
to the connection string but to no avail. I continue to get this error.
I am using the same mysql database for both the WSO2_CARBON_DB and teh WSO2AM_DB plus I have a single publisher node and two separate store nodes all pointing to the same mysql datasource.
I notice the application edit is saved (or the new application is created) but the exception is still thrown in the console and an error message appears in the user interface (as per the error at the top of this question).
Is there some other setting, within the WSO2 conf files that I have to tweak in order to get this to work properly?
Add both autoReconnect and relaxAutoCommit flags to the jdbc url of your defined "WSO2AM_DB" datasource in master-datasources.xml file. This will resolve your issue.
<configuration>
<url>jdbc:mysql://localhost:3306/AM_DB?autoReconnect=true&relaxAutoCommit=true</url>
<username>xxxx</username>
<;password>xxxxx</password>
EDIT: I updated the url to reflect the correct syntax for escaping the ampersand.
just for the sake of completeness, the JDBC URL shoud be
jdbc:mysql://localhost:3306/WSO2CARBON_DB?autoReconnect=true&relaxAutoCommit=true
Is there a way to connect to a network drive that requires a different username/password than the username/password of the user running the package?
I need to copy files from a remote server. Right now I map the network drive in Windows Explorer then do I filesystem task. However, eventually this package will be ran automatically, from a different machine, and will need to map the network drive on its own. Is this possible?
You can use the Execute Process task with the "net use" command to create the mapped drive. Here's how the properties of the task should be set:
Executable: net
Arguments: use \Server\SomeShare YourPassword /user:Domain\YourUser
Any File System tasks following the Execute Process will be able to access the files.
Alternative Method
This Sql Server Select Article covers the steps in details but the basics are:
1) Create a "Execute Process Task" to map the network drive (this maps to the z:)
Executable: cmd.exe
Arguments: /c "NET USE Z: "\\servername\shareddrivename" /user:mydomain\myusername mypassword"
2) Then run a "File System Task" to perform the copy. Remember that the destination "Flat File Connection" must have "DelayValidation" set to True as z:\suchandsuch.csv won't exist at design time.
3) Finally, unmap the drive when you're done with another "Execute Process Task"
Executable: cmd.exe
Arguments: /c "NET USE Z: /delete"
Why not use an FTP task to GET the files over to the local machine? Run SSIS on the local machine. When transferring using FTP in binary, its real fast. Just remember that the ROW delimter for SSIS should be LF, not CRLF, as binary FTp does not convert LF (unix) to CRLF (windows)
You have to map the network drive, here's an example that I'm using now:
profile = "false"
landingPadDir = Dts.Variables("strLandingPadDir").Value.ToString
resultsDir = Dts.Variables("strResultsDir").Value.ToString
user = Dts.Variables("strUserName").Value.ToString
pass = Dts.Variables("strPassword").Value.ToString
driveLetter = Dts.Variables("strDriveLetter").Value.ToString
objNetwork = CreateObject("WScript.Network")
CheckDrive = objNetwork.EnumNetworkDrives()
If CheckDrive.Count > 0 Then
For intcount = 0 To CheckDrive.Count - 1 Step 2 'if drive is already mapped, then disconnect it
If CheckDrive.Item(intcount) = driveLetter Then
objNetwork.RemoveNetworkDrive(driveLetter)
End If
Next
End If
objNetwork.MapNetworkDrive(driveLetter, landingPadDir, profile, user, pass)
From There just use that driveLetter and access the file via the mapped drive.
I'm having one issue (which led me here) with a new script that accesses two share drives and performs some copy/move operations between the drives and I get an error from SSIS that says:
This network connection has files open or requests pending.
at Microsoft.VisualBasic.CompilerServices.LateBinding.InternalLateCall(Object o, Type objType, String name, Object[] args, String[] paramnames, Boolean[] CopyBack, Boolean IgnoreReturn)
at Microsoft.VisualBasic.CompilerServices.NewLateBinding.LateCall(Object Instance, Type Type, String MemberName, Object[] Arguments, String[] ArgumentNames, Type[] TypeArguments, Boolean[] CopyBack, Boolean IgnoreReturn)
at ScriptTask_3c0c366598174ec2b6a217c43470f581.ScriptMain.Main()
This is only on the "2nd run" of the process and if I run it a 3rd time it all works fine so I'm guessing the connection isn't being properly closed or it is not waiting for the copy/move to complete before moving forward or some such, but I'm unable to find a "close" or "flush" command that prevents this error. If you have any solution, please let me know, but the above code should work for getting the drive mapped using your alternate credentials and allow you to access that share.
Zach
To make the package more robust, you can do the following;
In the first Execute Process Task, set - FailTaskIfReturnCodeNotSuccessValue = False
This will let the package run if the last disconnect has not worked.
This is an older question but more recent versions of SQL Server with SSIS databases allow you to use a proxy to execute SQ Server jobs.
In SSMS Under Security<Credentials set up a credential in the database mapped to the AD account you want to use.
Under SQL Server Agent create a new proxy giving it the credential from step 1 and permissions to execute SSIS packages.
Under the SQL Server Agent jobs create a new job that executes your package
Select the step that executes the package and click EDIT. In the Run As dropdown select the Proxy you created in step 2