I have tried to add a chart to my WP8-App, but there is some problem. I added a SerialChart with this small line of XAML-Code:
<charts:SerialChart ></charts:SerialChart>
This code is working fine when inserting it into an empty project. (Of course nothing is displayed, but also no exception).
But when adding it to my project - where I use Caliburn.Micro as MVVM Framework - I always get a
System.Windows.Markup.XamlParseException: Unknown parser error: Scanner 2147500037.
at the InitializeComponents-Method.
Has anyone also used amCharts and Caliburn together and had any problems?
Ok. It was easy to solve...
My project is splitted into serval sub projects and the xaml-pages were in such a sub project.
Now I just had to also add a reference to AmCharts in the main project and it worked.
Related
I've customized a tutorial and am trying to import it into my project. After copying one View Controller Scene from Document Outline into my main project, it's throwing an exception without any description of the issue. The View Controller is subclassed, so I've made sure to import the associated Swift file and set it in Document Attributes.
I don't know how to troubleshoot this one.
===EDIT===
I'm at a total loss here. I created a new project and was able to import, build, and run the project. The only difference between my main project and the new one is the VC is not the initial View Controller.
The tuturial was written in XCode 11 and Swift 4. I haven't upgraded yet, but again I was able to import into a new project w/o issue.
Check the Connections inspector (the last option on the right sidebar) and make sure there are no connections with exclamation marks (!) after them.
If there are errors, check in the Identity inspector (the third option from the left on the right sidebar) if the class of the view controller is correct.
If the connections are not needed anymore (you gave the outlet a new name etc.), remove them by clicking on the X next to them.
I have created a framework which I want to use in my OS X app. Since updating to Xcode 7 on El Capitan, when I try to command-click on the import statement, Xcode goes to the following view.
How can I get Xcode to display the Swift representation properly?
I've had it happen before, and my solution was to recreate every project file which I don't want to do again.
From my experience there are two possible causes for this issue.
The first one is that your framework can't be located. To fix this you need to go to target's Build Settings and add a path to Framework Search Paths either an absolute:
/Users/{user}/path-to-framework-parent-directory
or relative to project directory:
$(PROJECT_DIR)/path-to-framework-parent-directory
Another possible cause is that the path to your framework contains a space in it. I found that it doesn't matter whether you try to escape it with backslash ../Project\ Name/frameworks or take the whole path in double-quotes "../Project Name/frameworks". The result would be that SourceKit could not load the module.
Note that $(PROJECT_DIR) could expand to a path with a space in it and it would too result in the same error. So it looks like a bug in Xcode/SourceKit (I tried the latest Xcode 7.2-beta3 and the bug is still there).
My repository was on the second hard drive /Voluems/Macintosh HD/Repos. I just renamed the hard drive to HD, so the path looks like /Volumes/HD/Repos and the problem was gone.
Max S. answer pointed me in the right direction, however I was using the 'recursive' option for my framework path.
To get things to work I had to explicitly add a path to directly the framework in question's immediate parent directoy (as oposed to just having a path to one of its higher up directories with the 'recursive' option set).
HTH
I had this problem too and the other solutions didn't work. I finally figured it out in my case:
The target name cannot have a space in it either
To rename it:
Go to your project settings
Expand the target list column on the left if not already there
Click on the relevant target once (or press Enter or Tab when having it selected) and type in the new name without the space
Weirdly, just changing the name of my folder from 'Developer' to 'Development' fixed the issue from me.
Running Product->Clean, Product->Build is what worked for me.
In my case, I have created a framework for my SDK along with podspec for making it cocoa pod.
I had the same problem when i use my SDK and it fixed when I imported Foundation API to the file where I am consuming my SDK
import Foundation
Here is another potential solution - one that worked for me:
After importing the framework I never built for simulator, only for real devices. Swift Modules were not showing up, same error. Then I built for Simulator and it suddenly worked, I could see the Swift Modules.
The reason is that when I make my framework, I have a step that copies the swift modules from the iphonesimulator build to the universal build, but does nothing with the modules from the iphoneos build. So my guess is that this is why it didn't work.
Note: once I selected simulator and built it started working all the time, regardless of the build destination.
using V2.0.0.5 - beta (not via nuget but compiled source).
All through out the application I am using Multi-View over single ViewModel. On one particular view now after a conversion from SQLCE to SQLite, I am getting either a race condition or invalid contextual return when it builds up the on the InvokeAction. One thing I am noticing is a ArgumentException on System.Windows.ni.dll and well the part of the problem is the Telerik Control primitives.dll... RadTransitionControl
The only difference between this view and another with almost exactly the same build out is the way I populate the view. The view is using a "non-table" viewmodel that I built up to show some related information between 2 related tables. When I selected one of the elements in the boundlist it presents RadMenu (edit/delete) selecting edit works goes into the method expected, using the data passed in from the selection event I am able to re-hydrate the dataitem in question to respective objects. And populate the view but it dies before completing the transition from view to view.
The thing that blows my mind here is that I am using that control all over for Transistions from one view piece to another, if I change the control to ContentControl it works just fine. Other views that have that control work as expected. Any ideas?
Moving some of the code around and separating some of the bundled code resulted in this not occurring guess problem fixed...
I am trying to compile this sample program but I am brand new to Flare and ActionScript. Here is the DependencyGraph example that I am trying to compile: http://flare.prefuse.org/apps/dependency_graph.
The error I am receiving right now is:
Access of unidentified property App
Are there certain packages or project files that I will need to import or add to the source code in order to fix this?
Looks like you need to grab this class as well:
http://flare.prefuse.org/src/flare.apps/src/flare/apps/App.as aside from that it looks like the imports are all coming from packages in flare and should be included in the flare swc file.
Edit
Okay so starting from scratch I was able to get Flex 3.4 SDK playing nicely with the flare demos:
Download zip http://sourceforge.net/projects/prefuse/files/flare/alpha-20090124/prefuse.flare-alpha-20090124.zip/download
extracted flare.apps to my desktop and build/flare.swc to my desktop
In FlashBuilder/Eclipse import a project (existing project) select the flare.apps folder on the desktop.
replace the existing library reference to bin/flare.swc with the one from the desktop. When I imported the project it had in the project properties->ActionScript Build Path I selected the bin/flare.swc entry it had and hit remove, then hit add swc and browsed for the one extracted to my desktop from the flare.zip.
Compile/Run
That all worked great with Flex 3.4 (Flare is out-dated if you haven't noticed). Upping my SDK to 4.6 I had to replace JSON (ambiguous due to a new one in the default package) with com.adobe.serialization.json.JSON. With Flex 3.4, did you see any errors relating to JSON? I don't have 3.4 on my system so I am using 3.6 right now and see many errors regarding the ambiguity of JSON. With regard to 3.4 I had no JSON errors, think the Class may have been introduced around when 3.6 was put out so that makes sense too... the issue is if you import JSON from some package but then it also has JSON in the default package, it doesn't know which one you want to use, if you use the fully qualified class name wherever you were using the shortened version it will remove the ambiguity so where you had JSON.decode just replace with com.adobe.serialization.json.JSON.decode, believe the one in the default package is the new one and doesn't match up to the old one's interface (method names) 100%.
After building with 4.6 it's a mixed bag... I see the loading bar and all the lines between dependencies but not seeing the labels themselves, my guess is something to do with the change in the font/text rendering engine between versions is making a difference though I'm not sure immediately how to resolve that. No errors compiling/running though.
Edit 2 good deal just had to add this to the font embed for it to work in 4.6
,embedAsCFF='false'
[Embed(source="verdana.TTF", fontName="VerdanaCust",embedAsCFF='false')]
Let me know if you try out these steps and still have issues, or if this helps you resolve your problems.
Edit 3
Also added you on my gmail alternatively can chat on SO directly to keep any relevant information connected to this QA
I am trying to run the program from http://help.adobe.com/en_US/flex/using/WS2db454920e96a9e51e63e3d11c0bf61c8a-7ff4.html
I am using Adbobe builder version 4.6 i encounter this problem WAVwriter class not found
when i do import com.adobe.audio.format.WAVWriter;
Also var outputFile:File = File.desktopDirectory.resolvePath("recording.wav"); File type is not found..
How to resolve this error
Exactly as Adnan Doric said. And if you want to output your file using Flash Player runtime (instead of AIR), you should use flash.net.FileReference class. Calling its dowload() method will pop up an external dialog which can be used to save your file.
File is an AIR class, make sure your project is for desktop or mobile (AIR). If not, you can make new desktop project by going to File/New/Flex Project... and check in the Desktop checkbox (for mobile, choose Flex Mobile Project).
Regarding WAVWriter, make sure you linked the related sources.