I have a div with content like this:
<div class="myDiv">
Here's some text that vary in length <span class="separator">/</span> Some other text <_other elements etc>
</div>
What I want is, only using CSS, to display the first text and hide the rest.
I have tried .myDiv *:not(:first-child) { display: none; } which hides all elements, except the first separator. All texts are still visible.
Is this even possible, only using CSS?
Edit: the text is in variable lenght, but this variation is restricted between 14 and 21 chars. It will never be line breaked. (Added this info for solutions like set the div to a width and visibility:hidden or solutions like that which is fully acceptable)
This is how I would do it:
<div class="myDiv"><span>Here's some text that vary in length</span> <span class="separator">/<span><span> Some other text </span><span><_other elements etc></span>
</div>
.myDiv > span:not(:first-child) {
display:none;
}
Here is the JSFiddle demo
Separate your text using span properly and then apply the css to hide the spans if its not the first-child
It is not possible to directly select text nodes using CSS so the logical way of achieving this would be to wrap the text in an element and hide that. Unfortunately, this is not an option in this instance as the HTML markup cannot be modified and JavaScript cannot be used.
Luckily, we can rely on two things:
The text will always be on one line
The .separator element will exist
We can therefore use a combination of overflow on .myDiv and a pseudo element in .separator to forcibly hide the unwanted text:
Add height: 1em; and line-height: 1em; to .myDiv to force it only to show one line of text
Add overflow: hidden; to .mDiv to ensure that the overflown content is hidden
Create an :after pseudo element in .separator and set it to display: block; to ensure that it is forced onto a new line. This will ensure that the separator itself (/) is still shown
.myDiv {
height: 1em;
line-height: 1em;
overflow: hidden;
}
.separator:after {
content:"";
display: block;
}
<div class="myDiv">Here's some text that vary in length <span class="separator">/</span> Some other text
<_other elements etc>
</div>
If the separator is not required the CSS can be simplified. The pseudo element can be removed and .separator itself can be set to display: block; to force it onto a new line.
.myDiv {
height: 1em;
line-height: 1em;
overflow: hidden;
}
.separator {
display: block;
}
<div class="myDiv">Here's some text that vary in length <span class="separator">/</span> Some other text
<_other elements etc>
</div>
Edited You can Use this also
.myDiv{
max-width: 28.5ch;
overflow: hidden;
white-space: nowrap;
}
OR
<style>
.myDiv *:first-child
{
display:none;
}
</style>
<div class="myDiv">Here's some text that vary in length <span class="separator"> Some other text <_other elements etc></span>
I'm not the best at HTML. Essentially I am trying to get the effect of a lot of line breaks, without filling my code with a lot of consecutive <br> tags. What I have in my head is this CSS:
.movedown {
position: relative;
down: 120px;
}
and this HTML, where my text is:
<span class="movedown">*text here*</span>
I only need it on a single page. Anyone know where I'm going wrong?
Assuming you want to inject lots of breaks between two words you can inject a span tag styled as follows:
.long-br {
display: block;
height: 12em; /* 12em is roughly 10 lines at current font size/1.2 line height */
}
<p>Hello <span class="long-br"></span> World</p>
Alternate: if you want to insert lots of breaks between two blocks of text, the ideal way is to use margins:
.long-gap {
margin-top: 12em;
}
<p>Paragraph 1</p>
<p class="long-gap">Paragraph 2</p>
Try this:
.movedown {
position: relative; //Not required
margin-top: 120px;
}
You need to use the CSS property margin-top to add some space without using line breaks.
.movedown {
margin-top: 120px;
}
down is not an existing css rule. What you should be using is a div with margin-top, this creates a space above the element.
.down {
margin-top: 50px;
}
*top text*
<div class="down">*text here*</div>
Instead of 'down' try:
top:120px;
Just use <div> elements instead of <span>.
By default div is a block style element and span is inline.
block occupies the whole row, so each new one will be on a new row.
You can change the default behaviour with CSS but better to get a grip of the basic elements first.
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
I have a line of code ( which is to long to be displayed in one line ) to be displayed on a web page in one line, just like above.
I don't it to be wrapped into two lines.
Can I accomplish this only using css?
To actually make this happen when you use words with spaces in between them overflow:auto is not enough, you'll also need text-overflow: nowrap.
http://jsfiddle.net/kZV3j/
Here's how SO's code block looks:
<pre>
<code>
<span>...</span>
</code>
</pre>
And the CSS:
pre {
overflow: auto;
}
Demo: http://jsfiddle.net/TfeLm/
I think you're looking for overflow:auto:
<div style="overflow:auto; width:200px;">aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa</div>
Create a containing element (e.g. a div), then set some basic CSS properties on it that define a width, and handle the overflow. Like this:
HTML
<div class="short">aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa</div>
CSS:
.short {
width:400px;
padding: 10px;
overflow-x:scroll;
}
jsFiddle example. Works in all modern browsers and IE8.
I think you are looking for the overflow property with a auto value:
<style>pre { width: 200px; overflow: auto; }</style>
<pre><code><p>Some tooooo long text on one line</></code></pre>
Live example: http://jsbin.com/uhuveg/
I believe that you should use the following CSS
#id {
width: 400px;
padding: 5px;
background: #C3C3C3;
overflow-x: scroll
}
See this live example
How to achieve same output without <br>?
<p>hello <br> How are you </p>
output:
hello
How are you
You can use white-space: pre; to make elements act like <pre>, which preserves newlines. Example:
p {
white-space: pre;
}
<p>hello
How are you</p>
Note for IE that this only works in IE8+.
Impossible with the same HTML structure, you must have something to distinguish between Hello and How are you.
I suggest using spans that you will then display as blocks (just like a <div> actually).
p span {
display: block;
}
<p><span>hello</span><span>How are you</span></p>
Use <br/> as normal, but hide it with display: none when you don't want it.
I would expect most people finding this question want to use css / responsive design to decide whether or not a line-break appears in a specific place. (and don't have anything personal against <br/>)
While not immediately obvious, you can actually apply display:none to a <br/> tag to hide it, which enables the use of media queries in tandem with semantic BR tags.
<div>
The quick brown fox<br />
jumps over the lazy dog
</div>
#media screen and (min-width: 20em) {
br {
display: none; /* hide the BR tag for wider screens (i.e. disable the line break) */
}
}
This is useful in responsive design where you need to force text into two lines at an exact break.
jsfiddle example
There are several options for defining the handling of white spaces and line breaks.
If one can put the content in e.g. a <p> tag it is pretty easy to get whatever one wants.
For preserving line breaks but not white spaces use pre-line (not pre) like in:
<style>
p {
white-space: pre-line; /* collapse WS, preserve LB */
}
</style>
<p>hello
How are you</p>
If another behavior is wanted choose among one of these (WS=WhiteSpace, LB=LineBreak):
white-space: normal; /* collapse WS, wrap as necessary, collapse LB */
white-space: nowrap; /* collapse WS, no wrapping, collapse LB */
white-space: pre; /* preserve WS, no wrapping, preserve LB */
white-space: pre-wrap; /* preserve WS, wrap as necessary, preserve LB */
white-space: inherit; /* all as parent element */
SOURCE: W3 Schools
The "\a" command in CSS generates a carriage return. This is CSS, not HTML, so it shall be closer to what you want: no extra markup.
In a blockquote, the example below displays both the title and the source link and separate the two with a carriage return ("\a"):
blockquote[title][cite]:after {
content:attr(title)"\a"attr(cite)
}
In the CSS use the code
p {
white-space: pre-line;
}
With this CSS every enter inside the P tag will be a break-line at the HTML.
Building on what has been said before, this is a pure CSS solution that works.
<style>
span {
display: inline;
}
span:before {
content: "\a ";
white-space: pre;
}
</style>
<p>
First line of text. <span>Next line.</span>
</p>
To make an element have a line break afterwards, assign it:
display:block;
Non-floated elements after a block level element will appear on the next line. Many elements, such as <p> and <div> are already block level elements so you can just use those.
But while this is good to know, this really depends more on the context of your content. In your example, you would not want to use CSS to force a line break. The <br /> is appropriate because semantically the p tag is the the most appropriate for the text you are displaying. More markup just to hang CSS off it is unnecessary. Technically it's not exactly a paragraph, but there is no <greeting> tag, so use what you have. Describing your content well with HTMl is way more important - after you have that then figure out how to make it look pretty.
<pre> <---------------------------------------
lorem ipsum
lorem ipsum
lorem ipsum
lorem ipsum
lorem ipsum
</pre> <--------------------------------------
OR
<div style="white-space:pre"> <-----------------------------------
lorem ipsum
lorem ipsum
lorem ipsum
lorem ipsum
lorem ipsum
</div> <-----------------------------------
source: https://stackoverflow.com/a/36191199/2377343
Here's a bad solution to a bad question, but one that literally meets the brief:
p {
width : 12ex;
}
p:before {
content: ".";
float: right;
padding-left: 6ex;
visibility: hidden;
}
Use overflow-wrap: break-word; like:
.yourelement{
overflow-wrap: break-word;
}
Maybe someone will have the same issue as me:
I was in a element with display: flex so I had to use flex-direction: column.
For a List of Links
The other answers provide some good ways of adding line breaks, depending on the situation. But it should be noted that the :after selector is one of the better ways to do this for CSS control over lists of links (and similar things), for reasons noted below.
Here's an example, assuming a table of contents:
<style type="text/css">
.toc a:after{ content: "\a"; white-space: pre; }
</style>
<span class="toc">
Item A1 Item A2
Item B1 Item B2
</span>
And here's Simon_Weaver's technique, which is simpler and more compatible. It doesn't separate style and content as much, requires more code, and there may be cases where you want to add breaks after the fact. Still a great solution though, especially for older IE.
<style type="text/css">
.toc br{ display: none; } /* comment out for horizontal links */
</style>
<span class="toc">
Item A1<br/> Item A2<br/>
Item B1<br/> Item B2<br/>
</span>
Note the advantages of the above solutions:
No matter the whitespace in the HTML, the output is the same (vs. pre)
No extra padding is added to the elements (see NickG's display:block comments)
You can easily switch between horizontal and vertical lists of links with some shared CSS without going into every HTML file for a style change
No float or clear styles affecting surrounding content
The style is separate from the content (vs. <br/>, or pre with hard-coded breaks)
This can also work for loose links using a.toc:after and <a class="toc">
You can add multiple breaks and even prefix/suffix text
Setting a br tag to display: none is helpful, but then you can end up with WordsRunTogether. I've found it more helpful to instead replace it with a space character, like so:
HTML:
<h1>
Breaking<br />News:<br />BR<br />Considered<br />Harmful!
</h1>
CSS:
#media (min-device-width: 1281px){
h1 br {content: ' ';}
h1 br:after {content: ' ';}
}
I like very simple solutions, here is one more:
<p>hello <span>How are you</span></p>
and CSS:
p {
display: flex;
flex-direction: column;
}
How about<pre> tag?
source: http://www.w3schools.com/tags/tag_pre.asp
The code can be:
<div class="text-class"><span>hello</span><span>How are you</span></div>
CSS would be:
.text-class {
display: flex;
justify-content: flex-start;
flex-direction: column;
align-items: center;
}
You need to declare the content within <span class="class_name"></span>. After it the line will be break.
\A means line feed character.
.class_name::after {
content: "\A";
white-space: pre;
}
You can add a lot of padding and force text to be split to new line, for example
p {
padding-right: 50%;
}
Worked fine for me in a situation with responsive design, where only within a certain width range it was needed for text to be split.
Using white-space will not work for long sentences without spaces like HiHowAreYouHopeYouAreDoingGood...etc to fix this consider using word-wrap: break-word; instead
it's made to allow long words to be able to break and wrap onto the next line., its used by Facebook, Instagram and me 😆
Example
#container {
width: 40%;
background-color: grey;
overflow:hidden;
margin:10px;
}
#container p{
white-space: pre-line;
background-color: green;
}
.flex{
display: flex;
}
#wrap {
width: 30%;
background-color: grey;
overflow:hidden;
margin:10px;
}
#wrap p{
word-wrap: break-word;
background-color: green;
}
<h1> white-space: pre-line;</h1>
<div class='flex'>
<div id="container">
<h5>With spaces </h5>
<p>Sample Text 1 Sample Text 1 Sample Text 1 Sample Text 1 Sample Text 1 Sample Text 1 Sample Text 1</p>
</div>
<div id="container">
<h5>No specaes (not working )</h5> <p>HiHowAreYouHopeYouAreDoingGoodHiHowAreYouHopeYouAreDoingGoodHiHowAreYouHopeYouAreDoingGood</p>
</div>
</div>
<h1> word-wrap: break-word;</h1>
<div class='flex'>
<div id="wrap">
<h5>With spaces </h5>
<p>Sample Text 1 Sample Text 1 Sample Text 1 Sample Text 1 Sample Text 1 Sample Text 1 Sample Text 1</p>
</div>
<div id="wrap">
<h5>No specaes (working )</h5> <p>HiHowAreYouHopeYouAreDoingGoodHiHowAreYouHopeYouAreDoingGoodHiHowAreYouHopeYouAreDoingGoodHiHowAreYouHopeYouAreDoingGood</p>
</div>
</div>
On CSS-tricks, Chris Coyier have tested lots of options and the final and pretty neat one was using display:table, Each one have their own problems which you will find out when you use background-color on the span!
body {
padding: 20px;
font-family: 'Open Sans', sans-serif;
}
h1 {
font-weight: 300;
font-size: 24px;
line-height: 1.6;
background: #eee;
padding: 20px;
margin: 5px 0 25px 0;
text-align:center;
}
h1 span {
color: white;
font-weight: 900;
}
h1 span {
background: black;
padding: 1px 8px;
display: table;
margin:auto;
}
<h1 class="one">
Break right after this
<span>
and before this
</span>
</h1>
Here You can see all other options on codepen:
Injecting a Line Break
A modern and simple solution could be setting the width like that:
width: min-content;
This CSS rule is mostly useful for text content, but not only:
https://developer.mozilla.org/en-US/docs/Web/CSS/min-content
p {
margin: 20px;
color: #222;
font-family:'Century Gothic', sans-serif;
border: 2px dotted grey;
padding: 3px;
}
.max {
width: max-content;
}
.min {
width: min-content;
}
<!DOCTYPE html>
<html lang="en">
<head />
<body>
<p class="max"> Max width available </p>
<p class="min"> Min width available </p>
</body>
</html>
Both Vincent Robert and Joey Adams answers are valid. If you don't want, however, change the markup, you can just insert a <br /> using javascript.
There is no way to do it in CSS without changing the markup.
In my case, I needed an input button to have a line break before it.
I applied the following style to the button and it worked:
clear:both;
In case this helps someone...
You could do this:
<p>This is an <a class="on-new-line">inline link</a>?</p>
With this css:
a.on-new-line:before {
content: ' ';
font-size:0;
display:block;
line-height:0;
}
Using instead of spaces will prevent a break.
<span>I DONT WANT TO BREAK THIS LINE UP, but this text can be on any line.</span>
I'm guessing you did not want to use a breakpoint because it will always break the line. Is that correct? If so how about adding a breakpoint <br /> in your text, then giving it a class like <br class="hidebreak"/> then using media query right above the size you want it to break to hide the <br /> so it breaks at a specific width but stays inline above that width.
HTML:
<p>
The below line breaks at 766px.
</p>
<p>
This is the line of text<br class="hidebreak"> I want to break.
</p>
CSS:
#media (min-width: 767px) {
br.hidebreak {display:none;}
}
https://jsfiddle.net/517Design/o71yw5vd/
This works in Chrome:
p::after {
content: "-";
color: transparent;
display: block;
}
How can I stop this text from overflowing?
<html>
<head>
<style type="text/css">
.sticky
{
background-color: #FCFC80;
margin: 5px;
height: 100px;
width: 135px;
}
.sticky .edit
{
vertical-align:middle;
height: 100px;
position:relative;
color:Black;
background-color:blue;
height:90px;
vertical-align:middle;
width:90px;
border-collapse:collapse;
}
</style>
</head>
<body>
<div id="note44" class="sticky">
<div id="text44" class="edit" title="Click to edit" style="">A very long word: abcdefasdfasfasd</div>
</div>
</body>
</html>
I think word-wrap is supported in most browsers?
word-wrap:break-word;
Depends on what the desired output should be, but if you want to hyphenate the word, you can use , that is, replace "abcdefasdfasfasd", with say, abcdefasdfasfasd.
You could also have a look at the overflow property.
does justify do it?
There's a CSS property called word-wrap. Give it the attribute "break-word" and you should be good to go.
.break-word {
word-wrap: break-word;
}
Source: Web Designer Wall - Force text to wrap
The css mentioned above won't work in all browser's as it's non-standard.
When I run into this I usually use php's wordwrap function, but that's no good if you're not using php.
Two things which need to be pointed out:
You've defined the height of the second element twice in the css.
If you wrap text inside an element with a defined height, it could well overflow, and cause you a new set of problems.