I have the following piece of statement entered into MySQL5.6 Command Line Client. However, the following error was received. I haven't even been able to add in END// Delimiter; after the select statement.
At the same time, i was wondering after the stored procedure has been created successfully, how do i CALL the stored procedure without the command line but using java codes.
Kindly assist. Greatly appreciated!
give space between delimiter and //. After your select statement write end; on next line and // at last line (after end; in next new line)
delimiter //
create procedure GetUStocks()
Begin
Select * From buystocks;
end;
//
mysql> delimiter //
mysql> CREATE PROCEDURE GetUStocke()
-> BEGIN
-> SELECT * FROM buystocks ;
-> END//
You need a space between DELIMITER and the symbol you are changing the delimiter to.
mysql> DELIMITER //
The clue that it worked should be that you get another mysql> prompt instead of the "unfinished command" prompt ->.
Re your comment, if you need to call a stored procedure from a Java application, refer to the manual on callable statements: http://dev.mysql.com/doc/refman/5.6/en/connector-j-usagenotes-statements-callable.html
Well, seriously, I was Shocked and still am upon this accidental discovery.
It's simply because you are not using the delimiter that you have defined for ending the procedure.
Here let me attach two snippets that will help illustrate what is generating the error.
Related
I was following a tutorial on how to create procedures, I wrote the code
CREATE PROCEDURE test2
AS
select * FROM vgsales_ratings;
and got
"AS" is not valid at this position expecting '('
I tried adding parentheses around some of the stuff but it didn't change anything. Is something wrong with my machine or is the code wrong. I'm using mysql workbench 8. The table exsits. Thanks for any help
I would simply use :
CREATE PROCEDURE test2 ()
select * FROM vgsales_ratings;
But most of time,we use a routine block if we have multiple statements. In this case, delimiter needs to be used to change the default delimiter. After the procedure is created, change the delimiter back to ; .
delimiter //
CREATE PROCEDURE test2 ()
BEGIN
IF (select count(*) FROM vgsales_ratings) > 0 then
select * FROM vgsales_ratings;
end if;
END //
delimiter ;
Very new to the environment, I have a question about a line that's added to the end of my code. The guide I'm following is:
http://net.tutsplus.com/tutorials/an-introduction-to-stored-procedures/
If anyone has a better one regarding MySQL stored procedures, I'm all ears.
Before I ask, this is the environment I'm using:
OS: Windows 7 / WAMP (MySQL 5.5.24) / MySQL Workbench
I'm instructed to define a delimiter; in my case I'm sticking with the default '$$.'
The stored procedure I created is:
DELIMITER $$
CREATE PROCEDURE test.`p2` ()
LANGUAGE SQL
DETERMINISTIC
COMMENT 'Adds "nson" to first and last names in the record.'
BEGIN
SELECT 'Hello World';
END $$
When I apply this stored procedure and I get the review screen, I see a new line of code added;
At the bottom:
DELIMITER ;
This lats line; is it added because the DELIMITER statement announces a block within which the defined delimiters ($$) can be used and thus closes the block in the end?
When using the builtin procedure editor, MySQL Workbench adds a few extra commands:
USE `test`; // <----------
DROP procedure IF EXISTS `p2`; // <----------
DELIMITER $$
USE `test`$$ // <----------
CREATE PROCEDURE test.`p2` ()
LANGUAGE SQL
DETERMINISTIC
COMMENT 'Adds "nson" to first and last names in the record.'
BEGIN
SELECT 'Hello World';
END $$
DELIMITER ; // <----------
Those commands are not strictly related to the stored procedures syntax, they're merely a commodity—other MySQL clients (such as HeidiSQL or the official command line utility) will not add them. The last delimiter change is probably a reset to avoid problems in future statements on the same connection.
You need to change the delimiter in order to instruct the client about where the procedure code starts and end. The problem is that the procedure body is normally a collection of SQL statements so omitting the delimiter change would make MySQL think that you are attempting to run a series of statements, the first of which would be this:
CREATE PROCEDURE test.`p2` ()
LANGUAGE SQL
DETERMINISTIC
COMMENT 'Adds "nson" to first and last names in the record.'
BEGIN
SELECT 'Hello World';
With DELIMITER $$ you are telling MySQL that your full statement goes from CREATE to END. It's just syntactic sugar: DELIMITER is not even a SQL keyword. HeidiSQL, for instance, provides a GUI with a text box where you write the procedure body, thus you don't need the DELIMITER workaround.
I am trying to understand, why delimiter used with stored procedure in mysql?
but i couldn't.
DELIMITER //
CREATE PROCEDURE GetAllProducts()
BEGIN
SELECT * FROM products;
END //
DELIMITER ;`
Mysql's default delimiter is ; which is used for one statement in the command line , something as
select * from users ;
When you write a trigger or stored procedure to execute the entire code mysql needs to understand that its a block of code/query.
If no delimiter is provided then when mysql encounters any ; inside the store procedure or trigger it will think that as one statement and will try to execute it. So we need to provide a delimiter for store procedure or trigger and make mysql understand that anything within that delimiter is one complete set of code.
So in your example
SELECT * FROM products;
it will be a part of the complete statement when there is a delimiter other than ; is provided at the beginning.
Very new to the environment, I have a question about a line that's added to the end of my code. The guide I'm following is:
http://net.tutsplus.com/tutorials/an-introduction-to-stored-procedures/
If anyone has a better one regarding MySQL stored procedures, I'm all ears.
Before I ask, this is the environment I'm using:
OS: Windows 7 / WAMP (MySQL 5.5.24) / MySQL Workbench
I'm instructed to define a delimiter; in my case I'm sticking with the default '$$.'
The stored procedure I created is:
DELIMITER $$
CREATE PROCEDURE test.`p2` ()
LANGUAGE SQL
DETERMINISTIC
COMMENT 'Adds "nson" to first and last names in the record.'
BEGIN
SELECT 'Hello World';
END $$
When I apply this stored procedure and I get the review screen, I see a new line of code added;
At the bottom:
DELIMITER ;
This lats line; is it added because the DELIMITER statement announces a block within which the defined delimiters ($$) can be used and thus closes the block in the end?
When using the builtin procedure editor, MySQL Workbench adds a few extra commands:
USE `test`; // <----------
DROP procedure IF EXISTS `p2`; // <----------
DELIMITER $$
USE `test`$$ // <----------
CREATE PROCEDURE test.`p2` ()
LANGUAGE SQL
DETERMINISTIC
COMMENT 'Adds "nson" to first and last names in the record.'
BEGIN
SELECT 'Hello World';
END $$
DELIMITER ; // <----------
Those commands are not strictly related to the stored procedures syntax, they're merely a commodity—other MySQL clients (such as HeidiSQL or the official command line utility) will not add them. The last delimiter change is probably a reset to avoid problems in future statements on the same connection.
You need to change the delimiter in order to instruct the client about where the procedure code starts and end. The problem is that the procedure body is normally a collection of SQL statements so omitting the delimiter change would make MySQL think that you are attempting to run a series of statements, the first of which would be this:
CREATE PROCEDURE test.`p2` ()
LANGUAGE SQL
DETERMINISTIC
COMMENT 'Adds "nson" to first and last names in the record.'
BEGIN
SELECT 'Hello World';
With DELIMITER $$ you are telling MySQL that your full statement goes from CREATE to END. It's just syntactic sugar: DELIMITER is not even a SQL keyword. HeidiSQL, for instance, provides a GUI with a text box where you write the procedure body, thus you don't need the DELIMITER workaround.
when trying to create a simple procedure in mysql 5.1.47-community it fails everytime i've tried everything!
even simple things like this!
DELIMITER //
CREATE PROCEDURE two ()
begin
SELECT 1+1;
end;
//
The error is
ERROR: Error 1064: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'mydb' at line 1
The error message you've given doesn't correspond to the code you've pasted. You're referring to "mydb" somewhere in the SQL you're running yet it's not anywhere in the code you've put in the question.
The code you've given should work fine as I see no syntax errors, you may just need to give it a database to work on ("test" in my case here, perhaps it should be "mydb" for you?).
DELIMITER //
CREATE PROCEDURE test.two ()
begin
SELECT 1+1;
end;
//
DELIMITER ;
CALL test.two;
However, I suspect the error you're getting is become of a line in your SQL that you're not showing us.
EDIT
It could perhaps be the delimiter command. You're changing the delimiter to // rather than the default ;. So perhaps you've run that command (and changed the delimiter for your session to //), and then tried to run USE mydb; where the ; is no longer recognised as a valid delimiter for your session, and that could be giving you the error. Try putting delimiter ; before your use line and see if that helps (and then use it again after you've defined your stored procedure so you can call it). This is just a theory though, as I'm not sure of the intricacies of the delimiter command.
Remove the final delimiter "end" instead "end;"
I had the same problem using heidisql as the fronted to enter the SQL. My first attempt was:
CREATE PROCEDURE Add_Two (IN someNumber int, OUT result INT)
BEGIN
SELECT someNumber +2 INTO result;
END
and this resulted in SQL ERROR (1064) because i was not aware that when using a client program a delimiter is needed to define the stored procedures.
After changing the above to this:
DELIMITER //
CREATE PROCEDURE Add_Two(IN someNumber int, OUT result INT)
BEGIN
SELECT someNumber +2 INTO result;
END
//
It worked out.
Example to call it
SET #someNumber :=8;
CALL Add_Two(#someNumber, #result);
SELECT #result;