When I run docker-compose up in my Docker project it fails with the following message:
Error starting userland proxy: listen tcp 0.0.0.0:3000: bind: address already in use
netstat -pna | grep 3000
shows this:
tcp 0 0 0.0.0.0:3000 0.0.0.0:* LISTEN -
I've already tried docker-compose down, but it doesn't help.
In your case it was some other process that was using the port and as indicated in the comments, sudo netstat -pna | grep 3000 helped you in solving the problem.
While in other cases (I myself encountered it many times) it mostly is the same container running at some other instance. In that case docker ps was very helpful as often I left the same containers running in other directories and then tried running again at other places, where same container names were used.
How docker ps helped me:
docker rm -f $(docker ps -aq) is a short command which I use to remove all containers.
Edit: Added how docker ps helped me.
This helped me:
docker-compose down # Stop container on current dir if there is a docker-compose.yml
docker rm -fv $(docker ps -aq) # Remove all containers
sudo lsof -i -P -n | grep <port number> # List who's using the port
and then:
kill -9 <process id> (macOS) or sudo kill <process id> (Linux).
Source: comment by user Rub21.
I had the same problem. I fixed this by stopping the Apache2 service on my host.
You can kill the process listening on that port easily with one command below :
kill -9 $(lsof -t -i tcp:<port#>)
ex :
kill -9 $(lsof -t -i tcp:<port#>)
or for ubuntu:
sudo kill -9 `sudo lsof -t -i:8000`
Man page for lsof : https://man7.org/linux/man-pages/man8/lsof.8.html
-9 is for hard kill without checking any deps.
(Not related, but might be useful if its PORT 5000 mystery) - the culprit process is due to Mac OS monterery.
The port 5000 is commonly used to serve local development servers. When updating to the latest macOS operating system, I was unable the docker to bind to port 5000, because it was already in use. (You may find a message along the lines of Port 5000 already in use.)
By running lsof -i :5000, I found out the process using the port was named ControlCenter, which is a native macOS application. If this is happening to you, even if you use brute force (and kill) the application, it will restart itself. In my laptop, lsof -i :5000 returns that Control Center is being used by process id 433. I could do killall -p 433, but macOS keeps restarting the process.
The process running on this port turns out to be an AirPlay server. You can deactivate it in
System Preferences › Sharing, and unchecking AirPlay Receiver to release port 5000.
I had same problem,
docker-compose down --rmi all (in the same directory where you run docker-compose up)
helps
UPD: CAUTION - this will also delete the local docker images you've pulled (from comment)
For Linux/Unix:
Simple search for linux utility using following command
netstat -nlp | grep 8888
It'll show processing running at this port, then kill that process using PID (look for a PID in row) of that process.
kill PID
In some cases it is critical to perform a more in-depth debugging to the problem before stopping a container or killing a process.
Consider following the checklist below:
1) Check you current docker compose environment
Run docker-compose ps. If port is in use by another container, stop it with docker-compose stop <service-name-in-compose-file> or remove it by replacing stop with rm.
2) Check the containers running outside your current workspace
Run docker ps to see list of all containers running under your host.
If you find the port is in use by another container, you can stop it with docker stop <container-id>.
(*) Because you're not under the scope of the origin compose environment - it is a good practice first to use docker inspect to gather more information about the container that you're about to stop.
3) Check if port is used by other processes running on the host
For example if the port is 6379 run:
$ sudo netstat -ltnp | grep ':6379'
tcp 0 0 127.0.0.1:6379 0.0.0.0:* LISTEN 915/redis-server 12
tcp6 0 0 ::1:6379 :::* LISTEN 915/redis-server 12
(*) You can also use the lsof command which is mainly used to retrieve information about files that are opened by various processes (I suggest running netstat before that).
So, In case of the output above the PID is 915. Now you can run:
$ ps j 915
PPID PID PGID SID TTY TPGID STAT UID TIME COMMAND
1 915 915 915 ? -1 Ssl 123 0:11 /usr/bin/redis-server 127.0.0.1:6379
And see the ID of the parent process (PPID) and the execution command.
You can also run: $ pstree -s <PID> to a visual display of the process and its related processes.
In our case we can see that the process probably is a daemon (PPID is 1) - In that case consider running: A) $ cat /proc/<PID>/status in order to get a more in-depth information about the process like the number of threads spawned by the process, its capabilities, etc'.
B) $ systemctl status <PID> in order to see the systemd unit that caused the creation of a specific process. If the service is not critical - you can stop and disable the service.
4) Restart Docker service
Run: sudo service docker restart.
5) You reached this point and..
Only if its not placing your system at risk - consider restarting the server.
In my case it was
Error starting userland proxy: listen tcp 0.0.0.0:9000: bind: address already in use
And all that I need is turn off debug listening in php storm
Most probably this is because you are already running a web server on your host OS, so it conflicts with the web server that Docker is attempting to start.
So try this one-liner before trying anything else:
sudo service apache2 stop; sudo service nginx stop; sudo nginx -s stop;
I had apache running on my ubuntu machine. I used this command to kill it!
sudo /etc/init.d/apache2 stop
I was getting the below error when i was trying to launch a new container -
listen tcp 0.0.0.0:8080: bind: address already in use.
To check which process is running on port 8080, run below command:
netstat -tulnp | grep 8080
i got the output below
[root#ip-112-x6x-2x-xxx.xxxxx.compute.internal (aws_main) ~]# netstat -tulnp | grep 8080 tcp 0 0 0.0.0.0:8080 0.0.0.0:* LISTEN **12749**/java [root#ip-112-x6x-2x-xxx.xxxxx.compute.internal (aws_main) ~]#
run
kill -9 12749
Then try to relaunch the container it should work
If redis server is started as a service, it will restart itself when you using kill -9 <process_id> or sudo kill -9 `sudo lsof -t -i:<port_number>` . In that case you will need to stop the redis service using following command.
sudo service redis-server stop
I upgraded my docker this afternoon and ran into the same problem. I tried restarting docker but no luck.
Finally, I had to restart my computer and it worked. Definitely a bug.
Check docker-compose.yml, it might be the case that the port is specified twice.
version: '3'
services:
registry:
image: mysql:5.7
ports:
- "3306:3306" <--- remove either this line or next
- "127.0.0.1:3306:3306"
Changing network_mode: "bridge" to "host" did it for me.
This with
version: '2.2'
services:
bind:
image: sameersbn/bind:latest
dns: 127.0.0.1
ports:
- 172.17.42.1:53:53/udp
- 172.17.42.1:10000:10000
volumes:
- "/srv/docker/bind:/data"
environment:
- 'ROOT_PASSWORD=secret'
network_mode: "host"
I ran into the same issue several times. Restarting docker seems to do the trick
A variation of #DmitrySandalov's answer: I had tomcat/java running on 8080, which needed to keep going. Looked at the docker-compose.yml file and altered the entry for 8080 to another of my choosing.
nginx:
build: nginx
ports:
#- '8080:80' <-- original entry
- '8880:80'
- '8443:443'
Worked perfectly. (The only wrinkle is the change will be wiped if I ever update the project, since it's coming from an external repo.)
At first, make sure which service you are running in your specific port. In your case, you are already using port number 3000.
netstat -aof | findstr :3000
now stop that process which is running on specific port
lsof -i tcp:3000
I resolve the issue by restarting Docker.
It makes more sense to change the port of the docker update instead of shutting down other services that use port 80.
Just a side note if you have the same issue and is with Windows:
In my case the process in my way is just grafana-server.exe. Because I first downloaded the binary version and double click the executable, and it now starts as a service by user SYSTEM which I cannot taskkill (no permission)
I have to go to "Service manager" of Windows and search for service "Grafana", and stop it. After that port 3000 is no longer occupied.
Hope that helps.
The one that was using the port 8888 was Jupiter and I had to change the configuration file of Jupiter notebook to run on another port.
to list who is using that specific port.
sudo lsof -i -P -n | grep 9
You can specify the port you want Jupyter to run uncommenting/editing the following line in ~/.jupyter/jupyter_notebook_config.py:
c.NotebookApp.port = 9999
In case you don't have a jupyter_notebook_config.py try running jupyter notebook --generate-config. See this for further details on Jupyter configuration.
Before it was running on :docker run -d --name oracle -p 1521:1521 -p 5500:5500 qa/oracle
I just changed the port to docker run -d --name oracle -p 1522:1522 -p 5500:5500 qa/oracle
it worked fine for me !
On my machine a PID was not being shown from this command netstat -tulpn for the in-use port (8080), so i could not kill it, killing the containers and restarting the computer did not work. So service docker restart command restarted docker for me (ubuntu) and the port was no longer in use and i am a happy chap and off to lunch.
maybe it is too rude, but works for me. restart docker service itself
sudo service docker restart
hope it works for you also!
I have run the container with another port, like... 8082 :-)
I came across this problem. My simple solution is to remove the mongodb from the system
Commands to remove mongodb in Ubuntu:
sudo apt-get purge mongodb mongodb-clients mongodb-server mongodb-dev
sudo apt-get purge mongodb-10gen
sudo apt-get autoremove
Let me add one more case, because I had the same error and none of the solutions listed so far works:
serv1:
...
networks:
privnet:
ipv4_address: 10.10.100.2
...
serv2:
...
# no IP assignment, no dependencies
networks:
privnet:
ipam:
driver: default
config:
- subnet: 10.10.100.0/24
depending on the init order, serv2 may get assigned the IP 10.10.100.2 before serv1 is started, so I just assign IPs manually for all containers to avoid the error. Maybe there are other more elegant ways.
I have the same problem and by stopping docker container it was resolved.
sudo docker container stop <container-name>
i solved with this sudo service redis-server stop
I'm new to Docker and I can't seem to get my mariadb container running. I have just freshly installed Docker on Macbook Pro running High Sierra.
I've simple used this command:
docker run --name db -e MYSQL_ROOT_PASSWORD=test -d -p 3306:3306
mariadb
Which is supposed to create an image and run the container from it. But I get the following error:
docker: Error response from daemon: driver failed programming
external connectivity on endpoint db
(d4d6631ae53d644b5c28a803d5814a792c7af6925ebcf84b61b49b4a0fe30f4b):
Error starting userland proxy: Bind for 0.0.0.0:3306 failed: port is
already allocated.
So far I may have used MySQL in the far past, but I'm pretty sure I don't have anything running on port 3306.
I have also tried not adding the -p tag, it will run when I use this but when i execute docker ps it will show 3306/tcp and NOT 0.0.0.0:3306->3306/tcp as the PORT.
I have also tried just having to port tag as -p 3306 but this will show 0.0.0.0:32769->3306/tcp as the PORT in docker ps.
I would love some help. Thanks in advance.
Use lsof command to check if a service / process is using the port 3306.
$ lsof -i tcp:3306
COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME
mysqld 721 krisnik 34u IPv4 0x348c24a60c9d72a9 0t0 TCP localhost:mysql (LISTEN)
Now kill / stop the service.
kill -9 <PID>
Re-run your Docker container. It should work fine as the required port is released.
Edit - 1
If lsof doesn't catch the process, netstat can also be used.
sudo netstat -lpn |grep :3306
kill -9 PID //PID processID used by 3306 Port
Ref - Port 3306 busy but no process using it
On my AWS ec2 server I have docker 1.9.1 installed.
In an image test_image based from ubuntu:trusty official docker image, I have tried to setup the LEMP(Linux, Nginx, MySQL, PHP) architecture.
Following is the docker command i have used to start my container:
docker run --name test_1 -d -p 80:80 -p 3306:3306 test_image /bin/sh -c "while true; do echo daemonized docker container; sleep 5000; done"
I have exposed port 80 and 3306 to the host's network interface and have also allowed AWS's security group to allow inbound connections to these ports. Connection type in security group is: MYSQL/Aurora and protocol is: TCP (I know its not very secure, its only for initial implementation. Production setup will be different)
I followed this DigitalOcean tutorial: https://www.digitalocean.com/community/tutorials/how-to-install-linux-nginx-mysql-php-lemp-stack-on-ubuntu-14-04
After installing Nginx and starting it I am able to test it in the browser via ec2's pubic ip i.e. http://xxx.xxx.xxx.xxx shows the default nginx welcome page.
While installing MySQL, I followed the following commands in the docker container:
apt-get install mysql-server
mysql_install_db
/etc/init.d/mysql start
mysql_secure_installation
I have given a password to my root user and during mysql_secure_installation i had allowed remote access to root user.
mysql -u root -p command from inside the container connects me to the mysql db but not from outside the container.
Also from my local machine:
I tried with mysql-client:
mysql -h xxx.xxx.xxx.xxx -u root -p
I got the following error: ERROR 2003 (HY000): Can't connect to MySQL server on 'xxx.xxx.xxx.xxx' (111)
and also through mysql workbench but I still can't connect to the mysql db.
What am I doing wrong?
In your host mysql's my.cnf set the bind address to 0.0.0.0 so that mysql listens on all network interfaces
bind-address = 0.0.0.0
The default config is:
# Instead of skip-networking the default is now to listen only on
# localhost which is more compatible and is not less secure.
#bind-address = 127.0.0.1
Recently I've managed to block all unused ports on my dedicated server (Linux CentOS latest 64-bit) but whenever I do so, sites that connect to my database just simply cannot connect.
iptables -A INPUT -i lo -p tcp --dport 3306 -j ACCEPT
iptables -A OUTPUT -o lo -p tcp --sport 3306 -j ACCEPT
I believe it has something to do with the OUTPUT port, but I am not sure.
Thanks.
If you want to allow remote incoming mysql connections you will need to define an INPUT rule that is not isolated to your local interface:
-A INPUT -m state --state NEW -m tcp -p tcp --dport 3306 -j ACCEPT
In Centos this will be defined in the /etc/sysconfig/iptables file. Then restart:
sudo service iptables restart
Alternatively, from the command line, you can use:
sudo system-config-firewall-tui
To configure your firewall, it is in the package of the same name:
sudo yum install system-config-firewall-tui -y
I have followed the following tutorial to set up my computer so that others can access MySql:
http://msdn.microsoft.com/en-us/library/ms345343(v=sql.105).aspx
The port that I had set up was 49172. When I now try to connect to this database from the same computer by using host name as my IP address, port as 49172, username as root and password as root I get an error saying I cannot connect to the server with some checks such as check if MySql is running, check rights and check firewalls (10061).
Could someone please tell me I am getting this error and how do I fix it?
Try resetting IPTables as it might cause blocked connections.
Use these:
iptables -F
iptables -X
iptables -t nat -F
iptables -t nat -X
iptables -t mangle -F
iptables -t mangle -X
iptables -P INPUT ACCEPT
iptables -P OUTPUT ACCEPT
iptables -P FORWARD ACCEPT