I'm trying to use Ungit with a github repo I have on a Nitrous box. I'm trying to figure out what the path should be.
For example - my github repo is in located at ~/learn-rails - so in the Ungit 'path' box I put: http://learn-rails-14513.usw1.actionbox.io:\~/learn-rails/ - and got a 'not valid path' error.
Ungit claims to work with cloud computing environments, and see no reason why it wouldn't, but I figure I must be missing something.
You can find the ungit info at https://github.com/FredrikNoren/ungit
When you run the command ungit in your ~/learnrails/ directory, you will be able to navigate to Preview > Port 8080 to view ungit (as long as ungit is still running in the console). This means that the URL will not include any subfolders within the URL. The preview URL should look closer to this:
http://learn-rails-14513.usw1.actionbox.io:8080
Ensure that you have performed the configuration step within the README to use port 8080, and this will work out.
Note: You may be interested in using tmux as well if you want to keep ungit running after you close the console.
Related
I'm using Windows 10 and installed gitlab-runner using the Gitlab's doc.
After a successful installation and registration, I try to leave the folderI used to install (C:\Gitlab-Runner in my instance) and try to run gitlab-runner. I get the response: 'gitlab-runner' is not recognized as an internal or external command, operable program or batch file.
I am able to run without issue in the C:\Gitlab-Runner folder, but nowhere else.
Based on the documentation and tutorials I looked at, I wouldn't expect this behavior; am I supposed to?
Did you check to ensure that it was added to The windows environment. You will likely need to update the path variable to include the path that you are using to run the command.
On windows, you add to the PATH variable with the following steps (yanked from google search page):
On the Windows taskbar, right-click the Windows icon and select System.
In the Settings window, under Related Settings, click Advanced system settings. ...
On the Advanced tab, click Environment Variables. ...
Click New to create a new environment variable.
Once you've added C:/Gitlab-runner/ to PATH, I believe you should be able to invoke with gitlab-runner.
The only thing I'll add is that, for setting PATH, the last step above is most likely unnecessary, as there will already be a variable named PATH with a list of directories stored in it. Just click EDIT and add your directory to the end of the list. Be sure to add the separator that is used for the others (I believe it's a semicolon on Windows...)
Solved. I need to call C:/Gitlab-runner/gitlab-runner rather than just gitlab-runner in other directories.
Please make sure the name of the exe is correct in the folder C:\GitLab-Runner
In my situation, I have the gilab-runner.exe.exe, there was an extra .exe in the file name though its not showing in the directory.
enter image description here
I've been trying to follow the
Setting Up Stackdriver Debugger for Java applications on Google Compute Engine, but am running into issues with Stackdriver Debug.
I'm building my .war file from a separate build server, then deploying it to my GCE server. I added the agent to the start command via /etc/defaults, and my app appears in the https://console.cloud.google.com/debug control panel. The version I set in the run command matches the revision that shows up in the source-context(s).json files.
However when I click open the app, I see the message that
No source version information was provided by the deployed application
I connected the app's git repo as a mirrored cloud repository, and can browse the source files in the sidebar of the Stackdriver Debug page. But, If I browse to a file and add a breakpoint I get an error that the error "File was not found in the executable."
I have ran the gcloud preview app gen-repo-info-file command, which created two basic json files storing my git repo and revision. Is it supposed to do anything else?
I have tried running jetty using both normal and extracted modes. If I have jetty first extract the war file, I can see the source-context.json filesin the WEB-INF/classes directory.
What am I missing?
https://github.com/GoogleCloudPlatform/cloud-debug-java#extra-classpath mentions
you can update the agentPath showing your WEB-INF/class directory.
-agentpath:/opt/cdbg/cdbg_java_agent.so=--cdbg_extra_class_path=/opt/tomcat/webapps/myapp/WEB-INF/classes
For multiple class paths:
-agentpath:/opt/cdbg/cdbg_java_agent.so=--cdbg_extra_class_path=/opt/tomcat/webapps/myapp/WEB-INF/classes:/another/path/with/classes
There are a couple of things going on here.
First, it sounds like you are doing the correct thing with gen-repo-info-file. The debugger agent should pick up the json files from the WEB-INF/classes directory.
The debugger uses fuzzy matching to find source files, so as long as the name of the .java file matches a file in your executable, you should not get that error.
The most likely scenario given the information in your question is that you are attaching the debugger to a launcher process, rather than your actual application. Without further details, I can't absolutely confirm that, though.
If you send us more details at cdbg-feedback#google.com, we can look more closely at your case to see if we can understand exactly what's happening, and potentially improve our documentation, since it sounds like you followed the docs pretty closely.
I have just installed Vault on my machine, I intend touse it single user.
When trying to use it for the first time, I get the error message below.
Is there anything I should enable?
I have the correct passwords.
I am using the Admin account.
I have Windows * 64 bits, Vault is also 64 bits.
Thanks to Beth's answer below, now I can at least visualise the following page, but still not be able to follow the links in it.
This is the result I get when I click on the links(Picture below).
Error messages are below, but the formatting is not good.
Most likely causes: The request matched a wildcard mime map.
The request is mapped to the static file handler. If there were different pre-conditions, the request will map to a different handler.
Things you can try: If you want to serve this content as a static file, add an explicit MIME map.
Detailed Error Information: Module StaticFileModule Notification ExecuteRequestHandler Handler StaticFile Error Code 0x80070032
Requested URL http://vrindavana:80/VaultService/Admin/default.aspx Physical Path C:\inetpub\wwwroot\VaultService\Admin\default.aspx
Logon Method Anonymous
Logon User Anonymous
IIS:
I have IIS installed and if I browse it I see what's on the picture below.
First try reaching the Vault server using a browser. Try the URL http://<your Vault server name>/vaultservice/index.html. If you can not reach that page, then change to either the FQDN or the IP address.
If you still cannot reach the index.html page, then try reaching it using a browser right on the server and use localhost. The URL would then be http://localhost/vaultservice/index.html.
Let me know the results of these URLs first and then I'll give you next steps.
Beth
SourceGear Technical Support
Thanks for the update.
The error seems to indicate a problem with the .NET Framework. Here are the next steps you should try.
1) Register the .NET framework with IIS. Run a command-prompt as administrator and then change directories until you get to the highest version of the 4.x .NET framework. It might look something like cd C:\Windows\Microsoft.net\framework64\v4.0.30319, but I'm not sure of the entire path on your machine. Then run the command aspnet_regiis -i.
Then try your web page again.
2) If you then get a 404.2 error, then open your IIS Manager, click on the machine name and then click on ISAPI and CGI restrictions. Make sure the .NET frameworks are set to Allow there.
i've build my application on localhost and running it without any error. i choose openshift to host my application code but i have a problem to make it works perfectly like on my localhost.
i want to add directive of AllowEncodedSlashes and set it to On in my apache2 configuration file, i have tried to edit the file from ~/php/configuration/etc/conf/httpd.conf and then restart the server using ctl_all restart. but the result are http error code 400 (Bad Request). before i add this directive into httpd.conf the result are http error code 404, i am just not sure if the changes are in effect or not. or apache is bugging?
is there anyone knows howto make this work for me?
See if you can add it into .htaccess file instead of httpd.conf file. Also the best way to troubleshoot these problems would be by reviewing your application logs for errors. All you have to do is run "rhc tail {appName}" from your client machine (where the rhc client tools are installed). That gives you the current log entries.
To get to the entire log, you'll want to ssh onto the gear(s) on which the language framework/cartridge is installed using this FAQ and run: more ~/{cartridgeID}/logs/*.log
where {cartridgeID} is your framework cartridge like nodejs-0.6, or your embedded cartridge logs like mysql-5.1.
I created a feature request for this. See this Trello card and feel free to vote it up.
If I run Inno Setup compiler from a command line/batch file it creates an exe with the version information in the file name.
However, when I run from hudson (same command line) I don't get the version information.
Perhaps I am missing something.
Is this a known issue?
This is the way I am doing it in the iss script file.
#define FileVerStr GetFileVersion(SrcApp)
EDIT:
The env vars are all set for all users - not just my login - so the service has access to everything that the command line build does.
EDIT: See my answer for a resolution of this.
Like "tim" has said, then relative paths doesn't work as expected for defines.
#define MyAppVer GetFileVersion(SourcePath + "\..\Build\Release\MyExeName.exe")
#if MyAppVer == ""
#error MyAppVer - Version information not found!
#endif
By prefixing with SourcePath then the relative path will start from the path where the InnoSetup-script is located.
You are likely running Hudson on Windows given the technology mentioned.
When there is a discrepancy between what happens on the command line and what Hudson does, it is often because Hudson is running as a service on Windows. This means it is running as the service user, which is distinct from your login account.
I would look for an environment variable that you have defined in your user profile that may enable this behavior, that is not being set for the service user.
I am not exactly sure how to describe how I "fixed" this/worked around it.
It seems the GetFileVersion() method does not use the same base path as the other part of the Inno functionality that determines where the source files/installable files are.
The SAME relative paths used for:
// this is for determining what files get put into the install image
[Files]
Source: ..\Build\ForRelease\MyExeName.exe; DestDir: {app}
and
#define SrcApp "..\Build\ForRelease\MyExename.exe"
#define FileVerStr GetFileVersion(SrcApp)
apparently do not use the same mechanism to resolve the file name/path. So what i did to work around this was to copy the exe file that contains the version info to two additional different locations (aside from ..\Build\ForRelease) - one where hudson starts the processes and also to the path where the inoo script is. (I am too lazy to figure out which one is the one that makes it all work.
Again, this works fine from my batch file but not from hudson. It is essentially a strange interaction with how Inno works I guess.