I am testing a website which in other machine like 192.168.0.1 in my machine which is 127.168.0.2 so in the website ajax jquery is used on page load in which the url is
http://localhost/Demo/store.php
but when i execute that page in website in other machine the database isnt connecting and even if i give the url as
http://192.168.0.1/Demo/store.php
its not connecting to database..What is the issue please tell me...How can i access from other system so that all my local database values can be displayed in other machines also..Thanx..
From http://technet.microsoft.com/en-us/library/cc940018.aspx:
address 127 .x.y.z is reserved for loopback testing and interprocess communication on the local computer.
Your probably not connected to your network correctly. Check your physical connection (blinking leds), then make sure you have a DHCP server on the network, otherwise assign a static IP.
After this try pinging the address to make sure the 2 hosts can see each other. Also open up any ports which may be behind a firewall, 3306 is default for MySQL DB.
Related
I am using a software - (Ingress) by FingerTec which uses mysql database.
Some setups of this system are only using a single installation - consisting of a mysql server and a client locally on the same machine.
I have been having issues since I started to use the software when it is installed on a user's laptop/PC. The problem is that frequently when running the mysql server and client, a window pops up asking for the local IP address and port (127.0.0.1 and 3306 by default). To continue using the software, one needs to run IngressDB installer where you need to 'Update Connection' by giving the root user and pass for mysql and then 'Upgrade Database' to refresh the database for any new settings. After this step the software runs fine.
Yesterday I managed to simulate this issue by changing the static IP on my laptop while connected directly to one of their Access Controllers. I had to re-Run Ingress DBinstaller.
Now my question is this:
When using your machine(laptop/pc) it is normally getting IP add, def GW, Subnet etc from a dhcp server therefore there is no guarantee that you will always get the same IP leased unless there is a reservation to the machine's mac address.
As described earlier - when ever there is a change of IP address leased from DHCP, a window pops up showing the loopback address 127.0.0.1 and the mysql port 3306. So it never shows the local IP address (ex. 192.168.1.100). So I was thinking - why is the loopback IP not enough for mysql client/server as this stays the same forever.
Is is normal that software using mysql database server requires a static local IP on the machine hosting it? I am referring only to instances where both mysql server and client reside on the same machine.
I appreciate your thoughts about this and maybe any other way I can get around this apart from making an IP address reservation in the DHCP server. Setting a static IP address manually on the LAN adapter is no solution for me as this would limit the machine to connect only to a certain network and cannot be used at other places.
If the client is the same local machine as the server, the MYSQL server specifically does not need a static IP because it pretty much already has one: 'localhost' or '127.0.0.1'. If the client is not on the same machine as the server, the server would need a static IP.
If the machine is acting as a server for other content, yes, it would need a static IP. If you're doing this at home, chances are that your access point will let you configure it for a static IP.
I'd like to know how to connect the client pc in a outside network for example a WAM network, i have my database in my pc and i use this like the server. I know how to connect mysql with another client computer inside the LAN network but i dont know how to do it like the other way.
if you don't understand something make me know.
PD: sorry for my english is my first question on a english forum
Ultimately it works exactly the same way - you need an IP address and a port to connect to your database on. You can either do this by setting up port-forwarding at the firewall on the network with the database server (basically, forward port 3306 to the LAN IP address), or by giving the database server a publicly available static IP and then opening port 3306 in any firewalls. Alternatively, you can set up a VPN to the network with the database server, and connect through this. If done right, the VPN option is much more secure.
However, you should ask yourself why you want to do this. Is your idea to have a client software that directly connects to the database? This is not a great design - it's usually better to have a backend database that is accessed via a frontend API (e.g. a RESTful API or similar). Among other benefits, this can give you much better (finer-grained) access control to the database.
Your MySql server should have a firewall rule to accept outside connection on MySql port (default is 3306). Best setup should allow connection from your clients WAN address only.
Then, your C# connector will be able to connect just the same as in LAN.
Apologies for the bad english, i'm french. :D
I've been looking for an answer since approximatively 4 days, and I don't know how to fix my issue.
So:
I want to virtualize two servers using virtualBox on Windows7 and i want them all on the same local network.
My VMs are running on Ubuntu 16.04
On the first VM I installed a lamp web server with MySQL 5.7 and i add phpmyadmin.
On the second VM I installed Jira standalone
--> I need to connect to my Database from my Jira server
So I used the Bridge adapter on each machine:
network configuration
network configuration
Ip adresses are attributed with the DHCP protocol.
The SQL machine ip is 192.168.6.80
The Jira machine ip is 192.168.6.101
The Host machine ip is 192.168.6.87
I'm able to ping each machine so there is no problem.
SQL server
When I start the machine everything seems to work, i can access from my SQL server:
localhost : home page of apache 2 saying "It Works"
localhost:5671 :
[���
5.7.18-0ubuntu0.16.04.1� ���UKBeM�ÿ÷�ÿ����������T(DGKg1hwd=�mysql_native_password���ÿ„Got
packets out of order
localhost/phpmyadmin : the index page where I can connect perfectly with root.
Host Machine (Windows)
192.168.6.80 : home page of apache 2 saying "It Works"
192.168.6.80:5671 :
[���
5.7.18-0ubuntu0.16.04.1� ���UKBeM�ÿ÷�ÿ����������T(DGKg1hwd=�mysql_native_password���ÿ„Got
packets out of order
192.168.6.80/phpmyadmin : the index page where I can connect perfectly with root.
Jira server
Here when i start the machine it works during approximatively 2-3 minutes,
I'am able to connect via:
mysql -u root -p -h 192.168.6.80 -P 5671
I am perfectly connected and i can also access to all the other adresses.
And then it stop working on this machine only.
Unable to connect
Firefox can’t establish a connection to the server at 192.168.6.80.
The site could be temporarily unavailable or too busy. Try again in a few moments.
If you are unable to load any pages, check your computer’s network connection.
If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.
And when i re-try to connect via mysql on terminal I get the Error 2003 (HYOOO)
This happen only when i use the connection of my work, at home it works perfectly without stopping!!
I have few leads:
problems of proxy authentication
problems of firewall configuration
i am in a private network with a domain name called something.eu
And when i launch firefox the proxy shows up automatically:
and-etc-ha.something.eu:9090
So i'm invited to enter my id and password.
My id is : luc.myName#something.eu
After that i'm connected to internet with firefox but not in terminal when i want to use apt.
I search on the web and i found this:
export http_proxy="http://Username:password#proxyip:port/"
and
export http_proxy="http://Domain\user:pasword#proxyip:port/"
So I tried different ways and i was able to download with apt. But the internet connexion with firefox was unstable. But if I use firefox on my host machine the connexion is perfect.
I also tried with settings -> network -> network proxy -> method manual
http: and-etc-ha.something.eu port: 9090
I don't know if I was understandable, tell me!^^
If you have any ideas to help me to solve this problem let me know.
Bye!
I found the cause: In fact there was a ip conflict inside the LAN because the DHCP was giving in-use ip address.
I decide to use the NAT connection with Port Forwarding on VirtualBox.
With that configuration I'm able to access my VMs on my LAN using the host ip address followed by the port of my choice.
I have a MySql Server 5.7 running as service on one computer of a LAN.
My application is installed and running fine on the same computer. I have 'Shared with everyone' set for the directory where my application is located. In the same directory I have put the libmysql.dll and the FDConnectionDefs.ini files.
My application is running fine on that computer. On the other computers on the LAN I created a link to the directory where my application is shared. When I try to run my application from these LAN systems they produce the error message
[FireDac][Phys][mySql] can't connect to mySql server 127.0.0.1 on port 3306... (10061).
All machines are running Windows 10 on 64 bit processors.
Here what i've tried to resolve the problem:
make sure that the user, password and host (%) are the same in mySql Profile and FDConnectionDefs.ini.
I've tried with different users even with root, i've tried to change host (%) to put the IP address of the computer trying to connect in the mySql profile.
I make sure that i have permissions to run my application and mySql and that the port 3306 is open in the Firewall/Kaspersky on each computer of the LAN. But always the same error message.
127.0.0.1 is a special IP address - the "loopback" address that is typically resolved for localhost on most systems. It is a private internal IP address that a computer can use to refer to itself. It has no meaning to other systems on a LAN since every computer will recognize 127.0.0.1 as meaning itself.
This means that when you are running the application on a remote system it will be trying to connect to a MySQL server running locally rather than on a server elsewhere.
You'll need to configure your FireDac components to connect to the actual LAN IP address that belongs to the system hosting the MySQL server. You will probably also need to make sure that your MySQL users are set up to authenticate from an IP other than localhost.
Hi I am completely new to phpMyAdmin and mySQL
Is there any way to configure remote management/access of my MySQL database by pointing requests or a browser to an IP? I have my server set up behind a router and have setup port forwarding for ports 8080 (tomcat) and 3306(should be default mySQL). Everything works locally on the machine, however I cannot access the dbs or phpmyadmin by pointing a browser from a computer on the local network to http://IP/phpmyadmin or from externally by pointing the browser to the IP given to me by my ISP. Any thoughts? Is there a specific way to edit the config files in order to allow the use of IP addresses?
Exposing your db and appserver on the internet is not a good idea. If these need to be accessed remotely, use a VPN or authenticated SSL. In the case of phpmyadmin - if this is running on a webserver on your network then you'll need to forward port 80 too - although I'd recommend using HTTPS/SSL (port 443)