I would like to get the values of the auto_increment column in my table (example). The catch is however, that I don't have the name of the auto_increment field. I'm currently using the following query to determine the name of the field:
SELECT column_name FROM information_schema.columns WHERE table_name = 'example' AND extra = 'auto_increment' LIMIT 1;
I would now like to pass the result of this query, as a 'string' to my actual query, and get the value. If I would like to do this in one go, how would I do that, because the below query, which should give me all auto_increment values used, only yields the above result -namely the auto_increment column name.
SELECT (
SELECT column_name
FROM information_schema.columns
WHERE table_name = 'example'
AND extra = 'auto_increment'
LIMIT 1
) AS pri
FROM example
Any thoughts would be appreciated :)
Many Regards,
Andreas
Here is an example of how you would do this using prepare and execute:
SELECT #s := concat('select `', column_name, '` from example e')
FROM information_schema.columns
WHERE table_name = 'example' AND extra = 'auto_increment'
LIMIT 1
prepare stmt from #s;
execute stmt;
deallocate prepare stmt;
Related
Let's say i have 'db_institute' and 'tb_data' which have 39 Column
While This Answers Selecting from the last 10 column, i want to add extra column in the query
the result would be like this when i prepared statement it
SELECT Name,lastcolumn1,...,lastcolumn10 from tb_data
And here's my failed attempt
SELECT Name,
CONCAT('SELECT ',
GROUP_CONCAT(COLUMN_NAME),
' FROM 'tb_data')
FROM
(SELECT
COLUMN_NAME,
ORDINAL_POSITION
FROM
INFORMATION_SCHEMA.COLUMNS
WHERE
TABLE_SCHEMA='db_institute'
AND
TABLE_NAME='tb_data'
ORDER BY
ORDINAL_POSITION DESC LIMIT 10) AS ord_desc
ORDER BY
ord_desc.ORDINAL_POSITION
into #sql
Which result error
Unknown column 'Name' in 'field list'
your reference is already correct. try this
SELECT
CONCAT('SELECT Franchisee, ', GROUP_CONCAT(COLUMN_NAME), ' FROM product_staging') # change product_staging to your table name and Franchisee to Name
FROM
(SELECT
COLUMN_NAME,
ORDINAL_POSITION
FROM
INFORMATION_SCHEMA.COLUMNS
WHERE
TABLE_SCHEMA='myob' # change it to your schema name
AND
TABLE_NAME='product_staging' # change it to your table name
ORDER BY
ORDINAL_POSITION DESC LIMIT 10) AS ord_desc
ORDER BY
ord_desc.ORDINAL_POSITION
INTO #qry;
PREPARE stmt1 FROM #qry;
EXECUTE stmt1;
How to search the entire database for column name equal to my rule and specific value as well.
Let's say that i want to search for column name like voucher where it's value contain that word value10
So far i can find the column name but i don't know how to match with value as well.
SELECT column_name FROM information_schema.columns
WHERE TABLE_SCHEMA = 'dbname' AND column_name LIKE '%voucher%'
So the end goal is to find any column name like voucher containing value10 within it's content.
Procedure code:
CREATE PROCEDURE search_tables ( IN column_pattern TEXT,
IN value_pattern TEXT )
BEGIN
SELECT GROUP_CONCAT (CONCAT( ' SELECT ''',
TABLE_NAME,
'.',
COLUMN_NAME,
''' AS `table.column`, ',
COLUMN_NAME,
' AS `value`\nFROM ',
TABLE_NAME,
'\nWHERE ',
COLUMN_NAME,
' LIKE ''',
value_pattern,
'''' )
SEPARATOR ' UNION ALL ')
INTO #query
FROM INFORMATION_SCHEMA.COLUMNS
WHERE column_name LIKE column_pattern
AND TABLE_SCHEMA = DATABASE();
PREPARE stmt FROM #query;
EXECUTE stmt;
DROP PREPARE stmt;
END
Test tables:
CREATE TABLE table1 (val1 VARCHAR(8), val2 TEXT);
INSERT INTO table1 VALUES
('a_01_a','b_11_b'),
('c_211_c','d_311_d'),
('e_55_e','f_00_f');
CREATE TABLE table2 (val3 CHAR(6), field4 VARCHAR(64));
INSERT INTO table2 VALUES
('x_1123','ghjghj_11_tyuyu'),
('8901_t','sdf_SDF_sdf');
Call:
CALL search_tables('%val%', '%11%');
Output:
table.column value
table1.val1 c_211_c
table1.val2 b_11_b
table1.val2 d_311_d
table2.val3 x_1123
fiddle
Create a stored procedure to loop through meta data table INFORMATION_SCHEMA to fetch all tables with column_name of choice. Further dynamic SQL is used to scan each of the tables retrieved for columns having the value of choice.
DDL and DML for setting the data for testing :
create table TESTA(COLMNA char(255),COLMNC char(255));
create table TESTB(COLMNA char(255),COLMNB char(255));
create table TESTC(COLMND char(255),COLMNA char(255));
insert into TESTA values('value0','someothercolmn');
insert into TESTB values('value0','anothersomeothercolmn');
insert into TESTB values('value1','Yetanothercolumn');
Test is to search all tables having column_name as COLMNA with value as value0. The procedure will accept column_name and column_Value, hence can be used across the database, just need to pass values as appropriate.
CREATE PROCEDURE Findtables( colmn_name VARCHAR(64),colmn_value VARCHAR(64) )
BEGIN
DECLARE tablename CHAR(64);
DECLARE c1 CURSOR FOR
SELECT table_name
FROM information_Schema
WHERE column_name = colmn_name;
OPEN c1;
lable_loop:LOOP
FETCH c1 INTO tablename;
select tablename;
SET #sql = CONCAT('SELECT * FROM ', tablename, ' WHERE ',colmn_name,' = "',colmn_value ,'" ;');
PREPARE stmt FROM #sql;
EXECUTE stmt;
DEALLOCATE PREPARE stmt;
END LOOP lable_loop;
CLOSE c1;
END;
Call the stored procedure :
CALL Findtables('COLMNA','value0');
Output :
tablename
TESTA
COLMNA COLMNC
value0 someothercolmn
tablename
TESTB
COLMNA COLMNB
value0 anothersomeothercolmn
tablename
TESTC
COLMND COLMNA
Demonstration of the solution can be found in DBFIDDLE link [https://dbfiddle.uk/?rdbms=mysql_8.0&fiddle=4888a6160faf97fb75665832d6610293][1]
PS : I have to create INFORMATION_SCHEMA table in dbfiddle as metadata tables are not accessible.
I have a quite big table and I want to find out which columns are unused (either empty or NULL for all rows). Is there an easy way to do that either with a query or with phpMyAdmin?
Thanks in advance!
You can try using sum() on each field in your table. The value will be 'null' for field which has only null values.
select sum(id), sum(name), sum(field1), sum(field2) from play_table
For a string column
SELECT SUM(CASE WHEN column is null or COALESCE(LTRIM(RTRIM(column)),'') = ''
THEN 0 ELSE 1 END) AS ZERO_IF_COLUMN_IS_ALL_NULL
FROM TABLE
For a numeric column
SELECT SUM(CASE WHEN column is null THEN 0 ELSE 1 END) AS ZERO_IF_COLUMN_IS_ALL_NULL
FROM TABLE
Yes you have to do it for each column, but you can do multiple of these in a single select statement.
SELECT column, COUNT(*)
FROM table
GROUP BY column
Then you can see which values inhabit column in which number.
This should work, not tested though.
SELECT * FROM INFORMATION_SCHEMA.COLUMNS
WHERE table_name = 'my_table'
AND column_default is null;
SHOW columns from "TableName";
The above commands display columns of the empty table and also its respective properties
{ex: Name having varchar(50) or int AUTO_INCREMENT (Primary Key)}
DELIMITER $$
CREATE PROCEDURE sp_empty()
BEGIN
SET #sql = NULL;
SELECT GROUP_CONCAT(
CONCAT('(SELECT GROUP_CONCAT(id) FROM Table1 WHERE `',
column_name, '` IS NULL ',
CASE
WHEN data_type IN('varchar', 'char')
THEN CONCAT('OR `', column_name, '` = ''''')
WHEN data_type IN('date', 'datetime', 'time')
THEN CONCAT('OR `', column_name, '` = 0')
ELSE ''
END, ')`', column_name, '`'))
INTO #sql
FROM INFORMATION_SCHEMA.COLUMNS
WHERE table_schema = SCHEMA()
AND table_name = 'table1'
AND column_name NOT IN ('id')
GROUP BY table_name;
SET #sql = CONCAT('SELECT ', #sql);
PREPARE stmt FROM #sql;
EXECUTE stmt;
DEALLOCATE PREPARE stmt;
END$$
DELIMITER ;
to use this, which separate your null columns
I want to copy/update data from Table A to Table B. Table B has some more additional columns. I have tried the following options.
1) `REPLACE INTO `B` (SHOW FIELDS FROM 'A') SELECT * FROM `A
2) `REPLACE INTO `B`
(SELECT `COLUMN_NAME` FROM `INFORMATION_SCHEMA`.`COLUMNS`
WHERE `TABLE_SCHEMA`='test1' AND `TABLE_NAME`='A') SELECT * FROM `A
But it throws errors. Can you guys help me how to select names with select query?
UPDATE:
3) As suggested by Jerko,
I have two tables A(warehouse_id,long,lat) B(warehouse_id,long)
Applied the following statement.
SET #query = CONCAT('REPLACE INTO `A` (SELECT ',
(SELECT GROUP_CONCAT(CONCAT('`',column_name, '`'))
FROM information_schema.columns
WHERE `TABLE_SCHEMA`='test2' AND `table_name` = 'A'),
' FROM `B`)');
PREPARE stmt FROM #query;
EXECUTE stmt;
This gives me the error
"#1054 - Unknown column 'lat' in 'field list' "
You can't do this dynamically in mysql like you are trying to do. MySQL expects your list of column names to be provided directly, not from a subquery.
If you want to do this dynamically you'll have to step back upstream to whatever language you are using to interact with MySQL such as PHP or Java.
Have you tried this?
insert into B(col1, . . ., coln)
select col1, . . ., coln
from A;
That is, list the fields from A in the select clause. List the corresponding columns for B in the insert column list.
If you need the list of columns, get them from INFORMATION_SCHEMA.COLUMNS and cut-and-paste into the query.
Actually there is a way
SET #query = CONCAT('REPLACE INTO `A` (',
(SELECT GROUP_CONCAT(CONCAT('`',column_name, '`'))
FROM information_schema.columns
WHERE `TABLE_SCHEMA`='test1' AND `table_name` = 'A'
AND column_name IN (SELECT column_name FROM information_schema.columns WHERE table_schema = 'test1' AND table_name='B')) ,
') (SELECT ',
(SELECT GROUP_CONCAT(CONCAT('`',column_name, '`'))
FROM information_schema.columns
WHERE `TABLE_SCHEMA`='test1' AND `table_name` = 'A'
AND column_name IN (SELECT column_name FROM information_schema.columns WHERE table_schema = 'test1' AND table_name='B')),
' FROM `B`)');
PREPARE stmt FROM #query;
EXECUTE stmt;
Try this
INSERT INTO B (field1,field2,...,fieldN)
SELECT (field1,field2,...,fieldN) FROM A
I would like to have a list of those columns of a table that have at least one non-NULL data entries in them.
In other words, I would like to get the column names for which the following returns at least one entry:
SELECT DISTINCT column_name FROM table WHERE column_name IS NOT NULL
I tried the following:
SELECT column_name
FROM information_schema.columns
WHERE table_name = "table_name"
AND EXISTS (
SELECT DISTINCT column_name FROM table_name WHERE column_name IS NOT NULL
)
But this also returns the column names where all the entries are NULL.
So how do I get only those columns with non-NULL entries?
Create from the INFORMATION_SCHEMA.COLUMNS table a string that contains the SQL you wish to execute, then prepare a statement from that string and execute it.
The SQL we wish to build will look like:
SELECT 'column_a'
FROM table_name
WHERE `column_a` IS NOT NULL
HAVING COUNT(*)
UNION ALL
SELECT 'column_b'
FROM table_name
WHERE `column_b` IS NOT NULL
HAVING COUNT(*)
-- etc.
(One could omit the WHERE clause and substitute COUNT(*) for COUNT(column), but I think that might be less efficient on indexed columns).
This can be done using the following:
SET group_concat_max_len = 4294967295;
SELECT GROUP_CONCAT(
' SELECT ',QUOTE(COLUMN_NAME),
' FROM table_name',
' WHERE `',REPLACE(COLUMN_NAME, '`', '``'),'` IS NOT NULL',
' HAVING COUNT(*)'
SEPARATOR ' UNION ALL ')
INTO #sql
FROM INFORMATION_SCHEMA.COLUMNS
WHERE TABLE_SCHEMA = DATABASE()
AND TABLE_NAME = 'table_name';
PREPARE stmt FROM #sql;
EXECUTE stmt;
DEALLOCATE PREPARE stmt;
See it on sqlfiddle.
Use this procedure this will print columns names of a table which have atleast one not null rows.
create or replace procedure list_col_notNull(tblName in varchar2)
as
lv_col_name varchar2(200);
lv_ctr number;
lv_sql varchar2(400);
CURSOR cur_col_name is
SELECT column_name
FROM USER_TAB_COLUMNS U
WHERE table_name = tblName order by column_name asc;
begin
open cur_col_name;
LOOP
FETCH cur_col_name INTO lv_col_name;
EXIT WHEN cur_col_name%NOTFOUND;
lv_sql := 'select count(1) From ' || tblName || ' where ' || lv_col_name || ' is not null' ;
EXECUTE IMMEDIATE lv_sql into lv_ctr;
if lv_ctr > 0
then
dbms_output.put_line(lv_col_name);
end if;